The streaking star effect: Why people want superior performance by individuals to continue more than identical performance by groups.

2020 ◽  
Author(s):  
Jesse Walker ◽  
Thomas Gilovich
Keyword(s):  
Superior Performance ◽  
Identical Performance

In situ TEM Studies of agglomeration of sub-nanometer Ru layers in Ru/C multilayers

1992 ◽  
Vol 50 (1) ◽  
pp. 256-257
Author(s):  
Tai D. Nguyen ◽  
Ronald Gronsky ◽  
Jeffrey B. Kortright
Keyword(s):  
Layered Structure ◽  
Driving Force ◽  
High Energy ◽  
Superior Performance ◽  
In Situ Tem ◽  
Rayleigh Instability ◽  
Practical Applications ◽  
Transmission Electron ◽  
Diffraction Patterns

Nanometer period Ru/C multilayers are one of the prime candidates for normal incident reflecting mirrors at wavelengths < 10 nm. Superior performance, which requires uniform layers and smooth interfaces, and high stability of the layered structure under thermal loadings are some of the demands in practical applications. Previous studies however show that the Ru layers in the 2 nm period Ru/C multilayer agglomerate upon moderate annealing, and the layered structure is no longer retained. This agglomeration and crystallization of the Ru layers upon annealing to form almost spherical crystallites is a result of the reduction of surface or interfacial energy from die amorphous high energy non-equilibrium state of the as-prepared sample dirough diffusive arrangements of the atoms. Proposed models for mechanism of thin film agglomeration include one analogous to Rayleigh instability, and grain boundary grooving in polycrystalline films. These models however are not necessarily appropriate to explain for the agglomeration in the sub-nanometer amorphous Ru layers in Ru/C multilayers. The Ru-C phase diagram shows a wide miscible gap, which indicates the preference of phase separation between these two materials and provides an additional driving force for agglomeration. In this paper, we study the evolution of the microstructures and layered structure via in-situ Transmission Electron Microscopy (TEM), and attempt to determine the order of occurence of agglomeration and crystallization in the Ru layers by observing the diffraction patterns.

We're So Bad It's Funny - Effects of Using Humour in the Marketing Communication of Low-Quality Service Providers

2020 ◽  
Vol 4 (2-3) ◽  
pp. 84-99
Author(s):  
Ilias Danatzis ◽  
Jana Möller ◽  
Christine Mathies
Keyword(s):  
Service Quality ◽  
Service Providers ◽  
Purchase Intentions ◽  
Service Performance ◽  
Superior Performance ◽  
Service Research ◽  
Marketing Communication ◽  
Quality Service ◽  
Customer Expectations ◽  
Service Outcomes

Low-quality service providers who are unable or unwilling to compete through superior performance increasingly use humour in their marketing communication to generate positive service outcomes. Yet it remains unclear whether using humour to communicate poor service quality is indeed effective. Based on an online experiment in the context of budget hotels, this study finds that using humour to deliberately communicate poor service quality leads to higher purchase intentions and service quality evaluations by reducing both technical and functional service quality expectations. Theoretically, this study extends humour and service research by providing first empirical evidence for the viability of using humour as an effective tool for leveraging customer expectations of service quality rather than improving service performance. Managerially, these insights highlight how reducing customer expectations is an alternative strategy for attracting new customers and for achieving superior quality evaluations.

Context-Driven Proactive Decision Support for Hybrid Teams

AI Magazine ◽  
2019 ◽  
Vol 40 (3) ◽  
pp. 41-57
Author(s):  
Manisha Mishra ◽  
Pujitha Mannaru ◽  
David Sidoti ◽  
Adam Bienkowski ◽  
Lingyi Zhang ◽  
...  
Keyword(s):  
Decision Support ◽  
Situational Awareness ◽  
Feature Space ◽  
Human Interaction ◽  
Superior Performance ◽  
Uncertain Environments ◽  
Cognitive States ◽  
Contextual Elements ◽  
Human Operators ◽  
Smart Machine

A synergy between AI and the Internet of Things (IoT) will significantly improve sense-making, situational awareness, proactivity, and collaboration. However, the key challenge is to identify the underlying context within which humans interact with smart machines. Knowledge of the context facilitates proactive allocation among members of a human–smart machine (agent) collective that balances auto­nomy with human interaction, without displacing humans from their supervisory role of ensuring that the system goals are achievable. In this article, we address four research questions as a means of advancing toward proactive autonomy: how to represent the interdependencies among the key elements of a hybrid team; how to rapidly identify and characterize critical contextual elements that require adaptation over time; how to allocate system tasks among machines and agents for superior performance; and how to enhance the performance of machine counterparts to provide intelligent and proactive courses of action while considering the cognitive states of human operators. The answers to these four questions help us to illustrate the integration of AI and IoT applied to the maritime domain, where we define context as an evolving multidimensional feature space for heterogeneous search, routing, and resource allocation in uncertain environments via proactive decision support systems.

Identification of managerial competencies of the organizational leaders of the Passifloraceae production sector in the Huila Department

2020 ◽  
Vol 36 (67) ◽  
pp. 61-78
Author(s):  
Hernando Gil Tovar ◽  
Derly Cibelly Lara Figueroa
Keyword(s):  
Methodological Approach ◽  
Superior Performance ◽  
Organizational Leaders ◽  
Management Skills ◽  
Generational Change ◽  
Production Sector ◽  
Managerial Competencies ◽  
Conducting Research ◽  
Definition Of ◽  
Small Producers

Managerial competencies, defined as the “underlying characteristics of an individual that have a causal relationship with effective or superior performance in the job” (Boyatzis, 1982, p. 12), are key to achievement of productive purposes in the Huila department, in Colombia. The present article, as an investigative result, seeks to identify those managerial competencies, both current and required, of the organizational leaders in the Passifloraceae productive sector in the Huila department, in Colombia. The epistemological paradigm used in this article is that of interpretivism. The reasoning method is deductive, and the methodological approach is mixed. The unit of analysis for this study consists of the directors of the associative organizations of Passifloraceae producers in the productive chain, where two types of players are identified: thirteen (13) leaders of organizations producing passion fruit, and five (5) representatives of institutions in the Huila department that influence the sector. The study concludes with the definition of the map of current managerial competences of organizations in the passionfruit productive sector, and is then contrasted with the map of competences required from these. It also highlights the importance of associativity for small producers, the need to continue conducting research in the sector, and the need to intervene through social outreach projects, so as to generate appropriation and training processes for a set of managerial competencies identified herein, which will strengthen management skills and competitiveness in this type of organization, and ensure, over time, generational change within the sector.

Mechanisms of Drug Solubilization by Polar Lipids in Biorelevant Media

2020 ◽  
Author(s):  
Vladimir Katev ◽  
Zahari Vinarov ◽  
Slavka S. Tcholakova
Keyword(s):  
Chain Length ◽  
Acyl Chain ◽  
Polar Lipids ◽  
Superior Performance ◽  
Head Group ◽  
Formulation Development ◽  
Biorelevant Media ◽  
Drug Solubilization ◽  
Colloidal Aggregates ◽  
Class 1

Despite the widespread use of lipid excipients in both academic research and oral formulation development, rational selection guidelines are still missing. In the current study, we aimed to establish a link between the molecular structure of commonly used polar lipids and drug solubilization in biorelevant media. We studied the effect of 26 polar lipids of the fatty acid, phospholipid or monoglyceride type on the solubilization of fenofibrate in a two-stage <i>in vitro</i> GI tract model. The main trends were checked also with progesterone and danazol.<br>Based on their fenofibrate solubilization efficiency, the polar lipids can be grouped in 3 main classes. Class 1 substances (n = 5) provide biggest enhancement of drug solubilization (>10-fold) and are composed only by unsaturated compounds. Class 2 materials (n = 10) have an intermediate effect (3-10 fold increase) and are composed primarily (80 %) of saturated compounds. Class 3 materials (n = 11) have very low or no effect on drug solubilization and are entirely composed of saturated compounds.<br>The observed behaviour of the polar lipids was rationalized by using two classical physicochemical parameters: the acyl chain phase transition temperature (<i>T</i><sub>m</sub>) and the critical micellar concentration (CMC). Hence, the superior performance of class 1 polar lipids was explained by the double bonds in their acyl chains, which: (1) significantly decrease <i>T</i><sub>m</sub>, allowing these C18 lipids to form colloidal aggregates and (2) prevent tight packing of the molecules in the aggregates, resulting in bigger volume available for drug solubilization. Long-chain (C18) saturated polar lipids had no significant effect on drug solubilization because their <i>T</i><sub>m</sub> was much higher than the temperature of the experiment (<i>T</i> = 37 C) and, therefore, their association in colloidal aggregates was limited. On the other end of the spectrum, the short chain octanoic acid manifested a high CMC (50 mM), which had to be exceeded in order to enhance drug solubilization. When these two parameters were satisfied (C > CMC, <i>T</i><sub>m</sub> < <i>T</i><sub>exp</sub>), the increase of the polar lipid chain length increased the drug solubilization capacity (similarly to classical surfactants), due to the decreased CMC and bigger volume available for solubilization.<br>The hydrophilic head group also has a dramatic impact on the drug solubilization enhancement, with polar lipids performance decreasing in the order: choline phospholipids > monoglycerides > fatty acids.<br>As both the acyl chain length and the head group type are structural features of the polar lipids, and not of the solubilized drugs, the impact of <i>T</i><sub>m</sub> and CMC on solubilization by polar lipids should hold true for a wide variety of hydrophobic molecules. The obtained mechanistic insights can guide rational drug formulation development and thus support modern drug discovery pipelines.<br>

Mechanisms of Drug Solubilization by Polar Lipids in Biorelevant Media

2020 ◽  
Author(s):  
Vladimir Katev ◽  
Zahari Vinarov ◽  
Slavka S. Tcholakova
Keyword(s):  
Chain Length ◽  
Acyl Chain ◽  
Polar Lipids ◽  
Superior Performance ◽  
Head Group ◽  
Formulation Development ◽  
Biorelevant Media ◽  
Drug Solubilization ◽  
Colloidal Aggregates ◽  
Class 1

Despite the widespread use of lipid excipients in both academic research and oral formulation development, rational selection guidelines are still missing. In the current study, we aimed to establish a link between the molecular structure of commonly used polar lipids and drug solubilization in biorelevant media. We studied the effect of 26 polar lipids of the fatty acid, phospholipid or monoglyceride type on the solubilization of fenofibrate in a two-stage <i>in vitro</i> GI tract model. The main trends were checked also with progesterone and danazol.<br>Based on their fenofibrate solubilization efficiency, the polar lipids can be grouped in 3 main classes. Class 1 substances (n = 5) provide biggest enhancement of drug solubilization (>10-fold) and are composed only by unsaturated compounds. Class 2 materials (n = 10) have an intermediate effect (3-10 fold increase) and are composed primarily (80 %) of saturated compounds. Class 3 materials (n = 11) have very low or no effect on drug solubilization and are entirely composed of saturated compounds.<br>The observed behaviour of the polar lipids was rationalized by using two classical physicochemical parameters: the acyl chain phase transition temperature (<i>T</i><sub>m</sub>) and the critical micellar concentration (CMC). Hence, the superior performance of class 1 polar lipids was explained by the double bonds in their acyl chains, which: (1) significantly decrease <i>T</i><sub>m</sub>, allowing these C18 lipids to form colloidal aggregates and (2) prevent tight packing of the molecules in the aggregates, resulting in bigger volume available for drug solubilization. Long-chain (C18) saturated polar lipids had no significant effect on drug solubilization because their <i>T</i><sub>m</sub> was much higher than the temperature of the experiment (<i>T</i> = 37 C) and, therefore, their association in colloidal aggregates was limited. On the other end of the spectrum, the short chain octanoic acid manifested a high CMC (50 mM), which had to be exceeded in order to enhance drug solubilization. When these two parameters were satisfied (C > CMC, <i>T</i><sub>m</sub> < <i>T</i><sub>exp</sub>), the increase of the polar lipid chain length increased the drug solubilization capacity (similarly to classical surfactants), due to the decreased CMC and bigger volume available for solubilization.<br>The hydrophilic head group also has a dramatic impact on the drug solubilization enhancement, with polar lipids performance decreasing in the order: choline phospholipids > monoglycerides > fatty acids.<br>As both the acyl chain length and the head group type are structural features of the polar lipids, and not of the solubilized drugs, the impact of <i>T</i><sub>m</sub> and CMC on solubilization by polar lipids should hold true for a wide variety of hydrophobic molecules. The obtained mechanistic insights can guide rational drug formulation development and thus support modern drug discovery pipelines.<br>

BRUSHFORM 65

Alloy Digest ◽  
2013 ◽  
Vol 62 (6) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Contact Force ◽  
Temperature Rise ◽  
Power Loss ◽  
High Reliability ◽  
Superior Performance ◽  
Contact Interface ◽  
Resistive Heating ◽  
Computer Power

Abstract BrushForm 65 is designed for both superior performance and high reliability in appliance, automotive, and computer power applications. Alloy BF-65’s combination of properties limits power loss at the contact interface, controls temperature rise from resistive heating, and provides stable contact force at temperatures to 200 C (390 F). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on forming. Filing Code: Cu-821. Producer or source: Materion Brush Performance Alloys.

G × E interaction studies in relation to heterosis and stability of grain yield in maize (Zea mays L.)

2020 ◽  
Vol 80 (03) ◽  
Author(s):  
K. Sumalini ◽  
T. Pradeep ◽  
D. Sravani
Keyword(s):  
Grain Yield ◽  
Zea Mays L ◽  
Yield Stability ◽  
Superior Performance ◽  
Dominant Effect ◽  
Stability Parameters ◽  
Hybrid Classes ◽  
Maize Inbreds ◽  
Comparative Stability ◽  
Potential Use

Interaction of homozygous inbreds and heterozygous single, three way and double crosses with environment had shown a differential response in achieving yield stability. Seven diverse maize inbreds, their 21 single crosses and 105 each of three way and double crosses obtained through diallel were evaluated for twelve characters across three diverse locations to estimate comparative stability of homozygous and heterozygous genotypes for grain yield. Contrasts in heterobeltiosis, combining ability and stability parameters in three environments and interaction effects were observed. Gain in heterobeltiosis (%) for grain yield was observed with decreased environmental quality in different hybrid classes suggesting that heterozygous hybrids are more stable due to individual buffering in single crosses and both individual and population buffering in case of three way and double crosses. Significant increase in SCA effects was observed in moderate environment at Hyderabad rather than at high yielding environment Palem. Significant G × E and Environment (linear) in all the crosses was observed for grain yield suggesting the effect of environment and its pre dominant effect on grain yield. Stability of hybrids was attributed to their superior performance over the parents in low yielding environment. Thus the potential use of selected heterozygous hybrids would allow under diverse environments is suggested to mitigate losses arising out of climate change.

Sign in / Sign up

Export Citation Format

Share Document