scholarly journals A binding protein regulates myosin-7a dimerization and actin bundle assembly

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Rong Liu ◽  
Neil Billington ◽  
Yi Yang ◽  
Charles Bond ◽  
Amy Hong ◽  
...  
Keyword(s):  
Atpase Activity ◽  
Actin Filament ◽  
Single Molecule ◽  
Binding Protein ◽  
Living Cells ◽  
Actin Bundle ◽  
Actin Bundles ◽  
Cytoskeletal Remodeling ◽  
Actin Protrusions

AbstractMyosin-7a, despite being monomeric in isolation, plays roles in organizing actin-based cell protrusions such as filopodia, microvilli and stereocilia, as well as transporting cargoes within them. Here, we identify a binding protein for Drosophila myosin-7a termed M7BP, and describe how M7BP assembles myosin-7a into a motile complex that enables cargo translocation and actin cytoskeletal remodeling. M7BP binds to the autoinhibitory tail of myosin-7a, extending the molecule and activating its ATPase activity. Single-molecule reconstitution show that M7BP enables robust motility by complexing with myosin-7a as 2:2 translocation dimers in an actin-regulated manner. Meanwhile, M7BP tethers actin, enhancing complex’s processivity and driving actin-filament alignment during processive runs. Finally, we show that myosin-7a-M7BP complex assembles actin bundles and filopodia-like protrusions while migrating along them in living cells. Together, these findings provide insights into the mechanisms by which myosin-7a functions in actin protrusions.

scholarly journals Bundling of actin filaments by alpha-actinin depends on its molecular length.

1990 ◽  
Vol 110 (6) ◽  
pp. 2013-2024 ◽  
Author(s):  
R K Meyer ◽  
U Aebi
Keyword(s):  
Smooth Muscle ◽  
Actin Filament ◽  
Actin Filaments ◽  
Actin Binding ◽  
Molar Ratio ◽  
Cross Linking ◽  
Actin Bundle ◽  
Actin Bundles ◽  
Chicken Gizzard ◽  
Molecular Length

Cross-linking of actin filaments (F-actin) into bundles and networks was investigated with three different isoforms of the dumbbell-shaped alpha-actinin homodimer under identical reaction conditions. These were isolated from chicken gizzard smooth muscle, Acanthamoeba, and Dictyostelium, respectively. Examination in the electron microscope revealed that each isoform was able to cross-link F-actin into networks. In addition, F-actin bundles were obtained with chicken gizzard and Acanthamoeba alpha-actinin, but not Dictyostelium alpha-actinin under conditions where actin by itself polymerized into disperse filaments. This F-actin bundle formation critically depended on the proper molar ratio of alpha-actinin to actin, and hence F-actin bundles immediately disappeared when free alpha-actinin was withdrawn from the surrounding medium. The apparent dissociation constants (Kds) at half-saturation of the actin binding sites were 0.4 microM at 22 degrees C and 1.2 microM at 37 degrees C for chicken gizzard, and 2.7 microM at 22 degrees C for both Acanthamoeba and Dictyostelium alpha-actinin. Chicken gizzard and Dictyostelium alpha-actinin predominantly cross-linked actin filaments in an antiparallel fashion, whereas Acanthamoeba alpha-actinin cross-linked actin filaments preferentially in a parallel fashion. The average molecular length of free alpha-actinin was 37 nm for glycerol-sprayed/rotary metal-shadowed and 35 nm for negatively stained chicken gizzard; 46 and 44 nm, respectively, for Acanthamoeba; and 34 and 31 nm, respectively, for Dictyostelium alpha-actinin. In negatively stained preparations we also evaluated the average molecular length of alpha-actinin when bound to actin filaments: 36 nm for chicken gizzard and 35 nm for Acanthamoeba alpha-actinin, a molecular length roughly coinciding with the crossover repeat of the two-stranded F-actin helix (i.e., 36 nm), but only 28 nm for Dictyostelium alpha-actinin. Furthermore, the minimal spacing between cross-linking alpha-actinin molecules along actin filaments was close to 36 nm for both smooth muscle and Acanthamoeba alpha-actinin, but only 31 nm for Dictyostelium alpha-actinin. This observation suggests that the molecular length of the alpha-actinin homodimer may determine its spacing along the actin filament, and hence F-actin bundle formation may require "tight" (i.e., one molecule after the other) and "untwisted" (i.e., the long axis of the molecule being parallel to the actin filament axis) packing of alpha-actinin molecules along the actin filaments.

scholarly journals F-actin bundles in Drosophila bristles are assembled from modules composed of short filaments.

1996 ◽  
Vol 135 (5) ◽  
pp. 1291-1308 ◽  
Author(s):  
L G Tilney ◽  
P Connelly ◽  
S Smith ◽  
G M Guild
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Modular Design ◽  
Thin Sections ◽  
Actin Bundle ◽  
Actin Bundles ◽  
Phalloidin Staining ◽  
Filament Bundles ◽  
End To End ◽  
As If

The actin bundles in Drosophila bristles run the length of the bristle cell and are accordingly 65 microns (microchaetes) or 400 microns (macrochaetes) in length, depending on the bristle type. Shortly after completion of bristle elongation in pupae, the actin bundles break down as the bristle surface becomes chitinized. The bundles break down in a bizarre way; it is as if each bundle is sawed transversely into pieces that average 3 microns in length. Disassembly of the actin filaments proceeds at the "sawed" surfaces. In all cases, the cuts in adjacent bundles appear in transverse register. From these images, we suspected that each actin bundle is made up of a series of shorter bundles or modules that are attached end-to-end. With fluorescent phalloidin staining and serial thin sections, we show that the modular design is present in nondegenerating bundles. Decoration of the actin filaments in adjacent bundles in the same bristle with subfragment 1 of myosin reveals that the actin filaments in every module have the same polarity. To study how modules form developmentally, we sectioned newly formed and elongating bristles. At the bristle tip are numerous tiny clusters of 6-10 filaments. These clusters become connected together more basally to form filament bundles that are poorly organized, initially, but with time become maximally cross-linked. Additional filaments are then added to the periphery of these organized bundle modules. All these observations make us aware of a new mechanism for the formation and elongation of actin filament bundles, one in which short bundles are assembled and attached end-to-end to other short bundles, as are the vertical girders between the floors of a skyscraper.

scholarly journals Synergy between Cyclase-associated protein and Cofilin accelerates actin filament depolymerization by two orders of magnitude

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Shashank Shekhar ◽  
Johnson Chung ◽  
Jane Kondev ◽  
Jeff Gelles ◽  
Bruce L. Goode
Keyword(s):  
Actin Filament ◽  
Single Molecule ◽  
Actin Filaments ◽  
Binding Protein ◽  
Actin Dynamics ◽  
Actin Network ◽  
Cellular Mechanisms ◽  
Actin Networks ◽  
Binding Event

AbstractCellular actin networks can be rapidly disassembled and remodeled in a few seconds, yet in vitro actin filaments depolymerize slowly over minutes. The cellular mechanisms enabling actin to depolymerize this fast have so far remained obscure. Using microfluidics-assisted TIRF, we show that Cyclase-associated protein (CAP) and Cofilin synergize to processively depolymerize actin filament pointed ends at a rate 330-fold faster than spontaneous depolymerization. Single molecule imaging further reveals that hexameric CAP molecules interact with the pointed ends of Cofilin-decorated filaments for several seconds at a time, removing approximately 100 actin subunits per binding event. These findings establish a paradigm, in which a filament end-binding protein and a side-binding protein work in concert to control actin dynamics, and help explain how rapid actin network depolymerization is achieved in cells.

scholarly journals Computing on actin bundles network

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Andrew Adamatzky ◽  
Florian Huber ◽  
Jörg Schnauß
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Ionic Currents ◽  
Computational Experiments ◽  
Two Dimensional ◽  
Actin Bundle ◽  
Actin Bundles ◽  
Actin Networks

Abstract Actin filaments are conductive to ionic currents, mechanical and voltage solitons. These travelling localisations can be utilised to generate computing circuits from actin networks. The propagation of localisations on a single actin filament is experimentally unfeasible to control. Therefore, we consider excitation waves propagating on bundles of actin filaments. In computational experiments with a two-dimensional slice of an actin bundle network we show that by using an arbitrary arrangement of electrodes, it is possible to implement two-inputs-one-output circuits.

scholarly journals Cofilin-mediated actin dynamics promotes actin bundle formation during Drosophila bristle development

2016 ◽  
Vol 27 (16) ◽  
pp. 2554-2564 ◽  
Author(s):  
Jing Wu ◽  
Heng Wang ◽  
Xuan Guo ◽  
Jiong Chen
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Actin Polymerization ◽  
Model System ◽  
Actin Dynamics ◽  
Actin Network ◽  
Loss Of Function ◽  
Actin Bundle ◽  
Actin Bundles

The actin bundle is an array of linear actin filaments cross-linked by actin-bundling proteins, but its assembly and dynamics are not as well understood as those of the branched actin network. Here we used the Drosophila bristle as a model system to study actin bundle formation. We found that cofilin, a major actin disassembly factor of the branched actin network, promotes the formation and positioning of actin bundles in the developing bristles. Loss of function of cofilin or AIP1, a cofactor of cofilin, each resulted in increased F-actin levels and severe defects in actin bundle organization, with the defects from cofilin deficiency being more severe. Further analyses revealed that cofilin likely regulates actin bundle formation and positioning by the following means. First, cofilin promotes a large G-actin pool both locally and globally, likely ensuring rapid actin polymerization for bundle initiation and growth. Second, cofilin limits the size of a nonbundled actin-myosin network to regulate the positioning of actin bundles. Third, cofilin prevents incorrect assembly of branched and myosin-associated actin filament into bundles. Together these results demonstrate that the interaction between the dynamic dendritic actin network and the assembling actin bundles is critical for actin bundle formation and needs to be closely regulated.

High resolution spot scan imaging of frozen, hydrated actin bundles with 400kV electrons

1992 ◽  
Vol 50 (1) ◽  
pp. 512-513
Author(s):  
J. Jakana ◽  
M.F. Schmid ◽  
P. Matsudaira ◽  
W. Chiu
Keyword(s):  
High Resolution ◽  
Binding Proteins ◽  
Actin Binding ◽  
Eukaryotic Cells ◽  
Dimensional Structure ◽  
Structural Basis ◽  
Actin Bundle ◽  
Actin Bundles ◽  
3 Dimensional ◽  
Macromolecular Assembly

Actin is a protein found in all eukaryotic cells. In its polymerized form, the cells use it for motility, cytokinesis and for cytoskeletal support. An example of this latter class is the actin bundle in the acrosomal process from the Limulus sperm. The different functions actin performs seem to arise from its interaction with the actin binding proteins. A 3-dimensional structure of this macromolecular assembly is essential to provide a structural basis for understanding this interaction in relationship to its development and functions.

A Molecular Logic Gate Enables Super-Resolved Imaging of Intracellular Lipid Droplets

2019 ◽  
Author(s):  
Adam Eördögh ◽  
Carolina Paganini ◽  
Dorothea Pinotsi ◽  
Paolo Arosio ◽  
Pablo Rivera-Fuentes
Keyword(s):  
Single Molecule ◽  
Lipid Droplets ◽  
Neutral Lipids ◽  
Logic Gate ◽  
Living Cells ◽  
Three Dimensions ◽  
Single Molecule Imaging ◽  
Molecular Logic Gate ◽  
Molecular Logic ◽  
Cellular Compartments

<div>Photoactivatable dyes enable single-molecule imaging in biology. Despite progress in the development of new fluorophores and labeling strategies, many cellular compartments remain difficult to image beyond the limit of diffraction in living cells. For example, lipid droplets, which are organelles that contain mostly neutral lipids, have eluded single-molecule imaging. To visualize these challenging subcellular targets, it is necessary to develop new fluorescent molecular devices beyond simple on/off switches. Here, we report a fluorogenic molecular logic gate that can be used to image single molecules associated with lipid droplets with excellent specificity. This probe requires the subsequent action of light, a lipophilic environment and a competent nucleophile to produce a fluorescent product. The combination of these requirements results in a probe that can be used to image the boundary of lipid droplets in three dimensions with resolutions beyond the limit of diffraction. Moreover, this probe enables single-molecule tracking of lipids within and between droplets in living cells.</div>

Sign in / Sign up

Export Citation Format

Share Document