scholarly journals Low-temperature nucleation anomaly in silicate glasses shown to be artifact in a 5BaO·8SiO2 glass

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Xinsheng Xia ◽  
D. C. Van Hoesen ◽  
Matthew E. McKenzie ◽  
Randall E. Youngman ◽  
K. F. Kelton

AbstractFor over 40 years, measurements of the nucleation rates in a large number of silicate glasses have indicated a breakdown in the Classical Nucleation Theory at temperatures below that of the peak nucleation rate. The data show that instead of steadily decreasing with decreasing temperature, the work of critical cluster formation enters a plateau and even starts to increase. Many explanations have been offered to explain this anomaly, but none have provided a satisfactory answer. We present an experimental approach to demonstrate explicitly for the example of a 5BaO ∙ 8SiO2 glass that the anomaly is not a real phenomenon, but instead an artifact arising from an insufficient heating time at low temperatures. Heating times much longer than previously used at a temperature 50 K below the peak nucleation rate temperature give results that are consistent with the predictions of the Classical Nucleation Theory. These results raise the question of whether the claimed anomaly is also an artifact in other glasses.

2007 ◽  
Vol 7 (1) ◽  
pp. 2169-2196 ◽  
Author(s):  
J. Kazil ◽  
E. R. Lovejoy

Abstract. The formation of new sulfate aerosol from the gas phase is commonly represented in atmospheric modeling with parameterizations of the steady state nucleation rate. Such parameterizations are based on classical nucleation theory or on aerosol nucleation rate tables, calculated with a numerical aerosol model. These parameterizations reproduce aerosol nucleation rates calculated with a numerical aerosol model only imprecisely. Additional errors can arise when the nucleation rate is used as a surrogate for the production rate of particles of a given size. We discuss these errors and present a method which allows a more precise calculation of steady state sulfate aerosol formation rates. The method is based on the semi-analytical solution of an aerosol system in steady state and on parameterized rate coefficients for H2SO4 uptake and loss by sulfate aerosol particles, calculated from laboratory and theoretical thermodynamic data.


2014 ◽  
Vol 14 (14) ◽  
pp. 7665-7680 ◽  
Author(s):  
D. Barahona

Abstract. In this work a new thermodynamic framework is developed and used to investigate the effect of water activity on the formation of ice within supercooled droplets. The new framework is based on a novel concept where the interface is assumed to be made of liquid molecules "trapped" by the solid matrix. It also accounts for the change in the composition of the liquid phase upon nucleation. Using this framework, new expressions are developed for the critical ice germ size and the nucleation work with explicit dependencies on temperature and water activity. However unlike previous approaches, the new model does not depend on the interfacial tension between liquid and ice. The thermodynamic framework is introduced within classical nucleation theory to study the effect of water activity on the ice nucleation rate. Comparison against experimental results shows that the new approach is able to reproduce the observed effect of water activity on the nucleation rate and the freezing temperature. It allows for the first time a phenomenological derivation of the constant shift in water activity between melting and nucleation. The new framework offers a consistent thermodynamic view of ice nucleation, simple enough to be applied in atmospheric models of cloud formation.


2007 ◽  
Vol 7 (13) ◽  
pp. 3447-3459 ◽  
Author(s):  
J. Kazil ◽  
E. R. Lovejoy

Abstract. The formation of new aerosol from the gas phase is commonly represented in atmospheric modeling with parameterizations of the steady state nucleation rate. Present parameterizations are based on classical nucleation theory or on nucleation rates calculated with a numerical aerosol model. These parameterizations reproduce aerosol nucleation rates calculated with a numerical aerosol model only imprecisely. Additional errors can arise when the nucleation rate is used as a surrogate for the production rate of particles of a given size. We discuss these errors and present a method which allows a more precise calculation of steady state sulfate aerosol formation rates. The method is based on the semi-analytical solution of an aerosol system in steady state and on parameterized rate coefficients for H2SO4 uptake and loss by sulfate aerosol particles, calculated from laboratory and theoretical thermodynamic data.


Author(s):  
Xi Xi ◽  
Hong Liu ◽  
Chang Cai ◽  
Ming Jia ◽  
Weilong Zhang

Abstract The work attempts to analyze the performance of homogeneous nucleation by using the non-equilibrium thermodynamics theory and the classical nucleation theory. A nucleation rate graph was constructed under a wide range of operating temperature conditions. The results indicate that the superheat limit temperature (SLT) estimated by the modified homogeneous nucleation sub-model is in good agreement with the experimental results. The nucleation rate increases exponentially with the liquid temperature rise when the liquid temperature exceeds the SLT under atmospheric pressure. The superheated temperature needed to trigger the bubble nucleation decreases with the elevated ambient pressure.


2009 ◽  
Vol 131 (4) ◽  
Author(s):  
Jadran Vrabec ◽  
Martin Horsch ◽  
Hans Hasse

Homogeneous nucleation processes are characterized by the nucleation rate and the critical droplet size. Molecular dynamics simulation is applied for studying homogeneous nucleation during condensation of supersaturated vapors of methane and ethane. The results are compared with the classical nucleation theory (CNT) and the Laaksonen–Ford–Kulmala (LFK) model that introduces the size dependence of the specific surface energy. It is shown for the nucleation rate that the Yasuoka–Matsumoto method and the mean first passage time method lead to considerably differing results. Even more significant deviations are found between two other approaches to the critical droplet size, based on the maximum of the Gibbs free energy of droplet formation (Yasuoka–Matsumoto) and the supersaturation dependence of the nucleation rate (nucleation theorem). CNT is found to agree reasonably well with the simulation results, whereas LFK leads to large deviations at high temperatures.


1992 ◽  
Vol 294 ◽  
Author(s):  
Tae M. Ahn ◽  
Charles G. Interrante ◽  
Richard A. Weller

ABSTRACTA case is made for the use of short-term laboratory data in making predictions on the likelihood of significant colloid formation in supersaturated leachates of glass, under long-term repository conditions, using “accelerated tests” with a large ratio of the surface area of the glass to the leachate volume. In the repository conditions in which colloids can form, long-term leaching may be a kinetically-controlled process that involves the continuous formation of colloids. If this kinetic process dominates, it could lead to a significant increase in the predicted rates of radionuclide release. The question is whether or not colloids may form after prolonged times; the delayed formation would make it difficult to use short-term laboratory test results to represent (or predict) the long-term and cumulative effects of radionuclides. In this work, the pertinent long-term kinetic processes are identified in part. Classical nucleation theory for particle formation, as a potential condensation mechanism for colloid formation, is applied to explain pertinent experimental data on colloid formation. The classical theory, which is justified for this discussion, indicates that as supersaturation of a leachate is decreased, the nucleation rate decreases most significantly, while the incubation time increases at a small rate. As a result of this decreased nucleation rate, the significance of colloids tends to vanish, and usefulness of data from “accelerated“ laboratory tests may be applicable to long-term behavior.


2013 ◽  
Vol 135 (10) ◽  
Author(s):  
Donguk Suh ◽  
Kenji Yasuoka

Condensation on a cubic seed particle was simulated by classical molecular dynamics (MD). Seed size and supersaturation ratio of the system were the factors that were examined in order to observe the effects of the dimension of seeds and thermodynamic conditions. Two stages of nucleation were observed in the phenomenon, where the first stage is from the seed growth and the second from homogeneous nucleation. Therefore, the nucleation rate and growth rate were each calculated by the Yasuoka–Matsumoto (YM) method. As the seed size increased, the growth rate decreased, but there was no clear seed influence on the homogeneous nucleation characteristics. Besides, the classical nucleation theory (CNT), cluster formation free energy and kinetic analysis were conducted. The free energy in the exponential term of the classical nucleation theory and that obtained from the cluster formation free energy showed different characteristics.


2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Atefeh Khaleghi ◽  
Seyed Mojtaba Sadrameli ◽  
Mehrdad Manteghian

AbstractNucleation is a fundamental process widely studied in different areas of industry and biology. This review paper comprehensively discussed the principles of classical nucleation theory (primary homogeneous), and heterogeneous nucleation. In the homogeneous part, the nucleation rate in the transient and intransient state is monitored and also heterogeneous nucleation is covered. Finally, conclusions have been deduced from the collected works studied here, and offers for future studies are proposed.


Author(s):  
Donguk Suh ◽  
Kenji Yasuoka

Condensation on a cubic seed particle was simulated by classical molecular dynamics. Seed size and supersaturation ratio of the system were the factors that were examined in order to observe the effects of the dimension of seeds and thermodynamic conditions. Two stages of nucleation were observed in the phenomenon, where the first stage is from the seed growth and the second from homogeneous nucleation. Therefore, the nucleation rate and growth rate were each calculated by the Yasuoka-Matsumoto method. As seed size increased the growth rate decreased, but there was no clear seed influence on the homogeneous nucleation characteristics. Besides the classical nucleation theory, cluster formation free energy and kinetic analysis were conducted. The free energy in the exponential term of the classical nucleation theory and that obtained from the cluster formation free energy showed different characteristics.


Sign in / Sign up

Export Citation Format

Share Document