scholarly journals Return to different climate states by reducing sulphate aerosols under future CO2 concentrations

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Toshihiko Takemura
Keyword(s):  
Climate Model ◽  
Surface Air Temperature ◽  
Paris Agreement ◽  
Anthropogenic Aerosols ◽  
Sulphate Aerosol ◽  
Coupled Models ◽  
Anthropogenic Aerosol ◽  
Temperature Changes ◽  
Sulphate Aerosols ◽  
Atmospheric Warming

AbstractIt is generally believed that anthropogenic aerosols cool the atmosphere; therefore, they offset the global warming resulting from greenhouse gases to some extent. Reduction in sulphate, a primary anthropogenic aerosol, is necessary for mitigating air pollution, which causes atmospheric warming. Here, the changes in the surface air temperature under various anthropogenic emission amounts of sulphur dioxide (SO2), which is a precursor of sulphate aerosol, are simulated under both present and doubled carbon dioxide (CO2) concentrations with a climate model. No previous studies have conducted explicit experiments to estimate the temperature changes due to individual short-lived climate forcers (SLCFs) in different climate states with atmosphere–ocean coupled models. The simulation results clearly show that reducing SO2 emissions at high CO2 concentrations will significantly enhance atmospheric warming in comparison with that under the present CO2 concentration. In the high latitudes of the Northern Hemisphere, the temperature change that will occur when fuel SO2 emissions reach zero under a doubled CO2 concentration will be approximately 1.0 °C, while this value will be approximately 0.5 °C under the present state. This considerable difference can affect the discussion of the 1.5 °C/2 °C target in the Paris Agreement.

scholarly journals Comparison of warming trends over the last century around Antarctica from three coupled models

1998 ◽  
Vol 27 ◽  
pp. 565-570 ◽  
Author(s):  
William M. Connolley ◽  
Siobhan P. O'Farrell
Keyword(s):  
Climate Models ◽  
Climate Model ◽  
Global Climate ◽  
Atmospheric Model ◽  
Global Climate Models ◽  
Large Temperature ◽  
Coupled Models ◽  
Temperature Changes ◽  
Model Variability ◽  
The Antarctic

We compare observed temperature variations in Antarctica with climate-model runs over the last century. The models used are three coupled global climate models (GCMs) — the UKMO, the CSIRO and the MPI forced by the CO2 increases observed over the last century, and an atmospheric model experiment forced with observed sea-surface temperatures and sea-ice extents over the last century. Despite some regions of agreement, in general the GCM runs appear to be incompatible with each other and with the observations, although the short observational record and high natural variability make verification difficult. One of the best places for a more detailed study is the Antarctic Peninsula where the density of stations is higher and station records are longer than elsewhere in Antarctica. Observations show that this area has seen larger temperature rises than anywhere else in Antarctica. None of the three GCMs simulate such large temperature changes in the Peninsula region, in either climate-change runs radiatively forced by CO2 increases or control runs which assess the level of model variability.

scholarly journals Sensitivity studies of different aerosol indirect effects in mixed-phase clouds

2009 ◽  
Vol 9 (4) ◽  
pp. 15045-15081
Author(s):  
U. Lohmann ◽  
C. Hoose
Keyword(s):  
Climate Model ◽  
Global Climate ◽  
Global Climate Model ◽  
Mixed Phase ◽  
Anthropogenic Aerosols ◽  
Anthropogenic Aerosol ◽  
Activation Effect ◽  
Aerosol Effect ◽  
Sensitivity Studies ◽  
Mixed Phase Clouds

Abstract. Aerosols affect the climate system by changing cloud characteristics. Using the global climate model ECHAM5-HAM, we investigate different aerosol effects on mixed-phase clouds: The glaciation effect, which refers to a more frequent glaciation due to anthropogenic aerosols, versus the de-activation effect, which suggests that ice nuclei become less effective because of an anthropogenic sulfate coating. The glaciation effect can partly offset the indirect aerosol effect on warm clouds and thus causes the total anthropogenic aerosol effect to be smaller. It is investigated by varying the parameterization for the Bergeron-Findeisen process and the threshold coating thickness of sulfate (SO4-crit), which is required to convert an externally mixed aerosol particle into an internally mixed particle. Differences in the net radiation at the top-of-the-atmosphere due to anthropogenic aerosols between the different sensitivity studies amount up to 0.5 W m−2. This suggests that the investigated mixed-phase processes have a major effect on the total anthropogenic aerosol effect.

scholarly journals Comparison of Climate Response to Anthropogenic Aerosol versus Greenhouse Gas Forcing: Distinct Patterns

2016 ◽  
Vol 29 (14) ◽  
pp. 5175-5188 ◽  
Author(s):  
Hai Wang ◽  
Shang-Ping Xie ◽  
Qinyu Liu
Keyword(s):  
Northern Hemisphere ◽  
Radiative Forcing ◽  
Climate Model ◽  
East Asian Monsoon ◽  
Climate Response ◽  
Anthropogenic Aerosols ◽  
Anthropogenic Aerosol ◽  
Asian Monsoon Region ◽  
Surface Temperature Change ◽  
Aerosol Forcing

Abstract Spatial patterns of climate response to changes in anthropogenic aerosols and well-mixed greenhouse gases (GHGs) are investigated using climate model simulations for the twentieth century. The climate response shows both similarities and differences in spatial pattern between aerosol and GHG runs. Common climate response between aerosol and GHG runs tends to be symmetric about the equator. This work focuses on the distinctive patterns that are unique to the anthropogenic aerosol forcing. The tropospheric cooling induced by anthropogenic aerosols is locally enhanced in the midlatitude Northern Hemisphere with a deep vertical structure around 40°N, anchoring a westerly acceleration in thermal wind balance. The aerosol-induced negative radiative forcing in the Northern Hemisphere requires a cross-equatorial Hadley circulation to compensate interhemispheric energy imbalance in the atmosphere. Associated with a southward shift of the intertropical convergence zone, this interhemispheric asymmetric mode is unique to aerosol forcing and absent in GHG runs. Comparison of key climate response pattern indices indicates that the aerosol forcing dominates the interhemispheric asymmetric climate response in historical all-forcing simulations, as well as regional precipitation change such as the drying trend over the East Asian monsoon region. While GHG forcing dominates global mean surface temperature change, its effect is on par with and often opposes the aerosol effect on precipitation, making it difficult to detect anthropogenic change in rainfall from historical observations.

scholarly journals Coupling aerosols to (cirrus) clouds in the global EMAC-MADE3 aerosol–climate model

2020 ◽  
Vol 13 (3) ◽  
pp. 1635-1661 ◽  
Author(s):  
Mattia Righi ◽  
Johannes Hendricks ◽  
Ulrike Lohmann ◽  
Christof Gerhard Beer ◽  
Valerian Hahn ◽  
...  
Keyword(s):  
Atmospheric Chemistry ◽  
Radiative Forcing ◽  
Climate Model ◽  
Cloud Droplet ◽  
Cirrus Clouds ◽  
Liquid Water Path ◽  
Coupled Models ◽  
Anthropogenic Aerosol ◽  
Intergovernmental Panel ◽  
New Model

Abstract. A new cloud microphysical scheme including a detailed parameterization for aerosol-driven ice formation in cirrus clouds is implemented in the global ECHAM/MESSy Atmospheric Chemistry (EMAC) chemistry–climate model and coupled to the third generation of the Modal Aerosol Dynamics model for Europe adapted for global applications (MADE3) aerosol submodel. The new scheme is able to consistently simulate three regimes of stratiform clouds – liquid, mixed-, and ice-phase (cirrus) clouds – considering the activation of aerosol particles to form cloud droplets and the nucleation of ice crystals. In the cirrus regime, it allows for the competition between homogeneous and heterogeneous freezing for the available supersaturated water vapor, taking into account different types of ice-nucleating particles, whose specific ice-nucleating properties can be flexibly varied in the model setup. The new model configuration is tuned to find the optimal set of parameters that minimizes the model deviations with respect to observations. A detailed evaluation is also performed comparing the model results for standard cloud and radiation variables with a comprehensive set of observations from satellite retrievals and in situ measurements. The performance of EMAC-MADE3 in this new coupled configuration is in line with similar global coupled models and with other global aerosol models featuring ice cloud parameterizations. Some remaining discrepancies, namely a high positive bias in liquid water path in the Northern Hemisphere and overestimated (underestimated) cloud droplet number concentrations over the tropical oceans (in the extratropical regions), which are both a common problem in these kinds of models, need to be taken into account in future applications of the model. To further demonstrate the readiness of the new model system for application studies, an estimate of the anthropogenic aerosol effective radiative forcing (ERF) is provided, showing that EMAC-MADE3 simulates a relatively strong aerosol-induced cooling but within the range reported in the Intergovernmental Panel on Climate Change (IPCC) assessments.

scholarly journals Desert dust and anthropogenic aerosol interactions in the Community Climate System Model coupled-carbon-climate model

2011 ◽  
Vol 8 (2) ◽  
pp. 387-414 ◽  
Author(s):  
N. Mahowald ◽  
K. Lindsay ◽  
D. Rothenberg ◽  
S. C. Doney ◽  
J. K. Moore ◽  
...  
Keyword(s):  
Carbon Cycle ◽  
Climate Model ◽  
Regional Climate ◽  
Climate Feedback ◽  
Dust Deposition ◽  
Anthropogenic Aerosols ◽  
Anthropogenic Aerosol ◽  
Climate System Model ◽  
Desert Dust ◽  
The Impact

Abstract. Coupled-carbon-climate simulations are an essential tool for predicting the impact of human activity onto the climate and biogeochemistry. Here we incorporate prognostic desert dust and anthropogenic aerosols into the CCSM3.1 coupled carbon-climate model and explore the resulting interactions with climate and biogeochemical dynamics through a series of transient anthropogenic simulations (20th and 21st centuries) and sensitivity studies. The inclusion of prognostic aerosols into this model has a small net global cooling effect on climate but does not significantly impact the globally averaged carbon cycle; we argue that this is likely to be because the CCSM3.1 model has a small climate feedback onto the carbon cycle. We propose a mechanism for including desert dust and anthropogenic aerosols into a simple carbon-climate feedback analysis to explain the results of our and previous studies. Inclusion of aerosols has statistically significant impacts on regional climate and biogeochemistry, in particular through the effects on the ocean nitrogen cycle and primary productivity of altered iron inputs from desert dust deposition.

scholarly journals Aerosol indirect effects in a multi-scale aerosol-climate model PNNL-MMF

2011 ◽  
Vol 11 (1) ◽  
pp. 3399-3459 ◽  
Author(s):  
M. Wang ◽  
S. Ghan ◽  
M. Ovchinnikov ◽  
X. Liu ◽  
R. Easter ◽  
...  
Keyword(s):  
Indirect Effects ◽  
Large Scale ◽  
Climate Models ◽  
Climate Model ◽  
Global Climate ◽  
Global Climate Models ◽  
Anthropogenic Aerosols ◽  
Anthropogenic Aerosol ◽  
Aerosol Indirect Effects ◽  
Multi Scale

Abstract. Much of the large uncertainty in estimates of anthropogenic aerosol effects on climate arises from the multi-scale nature of the interactions between aerosols, clouds and large-scale dynamics, which are difficult to represent in conventional global climate models (GCMs). In this study, we use a multi-scale aerosol-climate model that treats aerosols and clouds across multiple scales to study aerosol indirect effects. This multi-scale aerosol-climate model is an extension of a multi-scale modeling framework (MMF) model that embeds a cloud-resolving model (CRM) within each grid cell of a GCM. The extension allows the explicit simulation of aerosol/cloud interactions in both stratiform and convective clouds on the global scale in a computationally feasible way. Simulated model fields, including liquid water path (LWP), ice water path, cloud fraction, shortwave and longwave cloud forcing, precipitation, water vapor, and cloud droplet number concentration are in agreement with observations. The new model performs quantitatively similar to the previous version of the MMF model in terms of simulated cloud fraction and precipitation. The simulated change in shortwave cloud forcing from anthropogenic aerosols is −0.77 W m−2, which is less than half of that in the host GCM (NCAR CAM5) (−1.79 W m−2) and is also at the low end of the estimates of most other conventional global aerosol-climate models. The smaller forcing in the MMF model is attributed to its smaller increase in LWP from preindustrial conditions (PI) to present day (PD): 3.9% in the MMF, compared with 15.6% increase in LWP in large-scale clouds in CAM5. The much smaller increase in LWP in the MMF is caused by a much smaller response in LWP to a given perturbation in cloud condensation nuclei (CCN) concentrations from PI to PD in the MMF (about one-third of that in CAM5), and, to a lesser extent, by a smaller relative increase in CCN concentrations from PI to PD in the MMF (about 26% smaller than that in CAM5). The smaller relative increase in CCN concentrations in the MMF is caused in part by a smaller increase in aerosol lifetime from PI to PD in the MMF, a positive feedback in aerosol indirect effects induced by cloud lifetime effects. The smaller response in LWP to anthropogenic aerosols in the MMF model is consistent with observations and with high resolution model studies, which may indicate that aerosol indirect effects simulated in conventional global climate models are overestimated and point to the need to use global high resolution models, such as MMF models or global CRMs, to study aerosol indirect effects. The simulated total anthropogenic aerosol effect in the MMF is −1.05 W m−2, which is close to the Murphy et al. (2009) inverse estimate of −1.1 ± 0.4 W m−2 (1σ) based on the examination of the Earth's energy balance. Further improvements in the representation of ice nucleation and low clouds are needed.

scholarly journals Sensitivity studies of different aerosol indirect effects in mixed-phase clouds

2009 ◽  
Vol 9 (22) ◽  
pp. 8917-8934 ◽  
Author(s):  
U. Lohmann ◽  
C. Hoose
Keyword(s):  
Climate Model ◽  
Global Climate ◽  
Global Climate Model ◽  
Mixed Phase ◽  
Anthropogenic Aerosols ◽  
Anthropogenic Aerosol ◽  
Activation Effect ◽  
Aerosol Effect ◽  
Sensitivity Studies ◽  
Mixed Phase Clouds

Abstract. Aerosols affect the climate system by changing cloud characteristics. Using the global climate model ECHAM5-HAM, we investigate different aerosol effects on mixed-phase clouds: The glaciation effect, which refers to a more frequent glaciation due to anthropogenic aerosols, versus the de-activation effect, which suggests that ice nuclei become less effective because of an anthropogenic sulfate coating. The glaciation effect can partly offset the indirect aerosol effect on warm clouds and thus causes the total anthropogenic aerosol effect to be smaller. It is investigated by varying the parameterization for the Bergeron-Findeisen process and the threshold coating thickness of sulfate (SO4-crit), which is required to convert an externally mixed aerosol particle into an internally mixed particle. Differences in the net radiation at the top-of-the-atmosphere due to anthropogenic aerosols between the different sensitivity studies amount up to 0.5 W m−2. This suggests that the investigated mixed-phase processes have a major effect on the total anthropogenic aerosol effect.

scholarly journals Climate model studies of sulphate aerosols and clouds

1997 ◽  
Vol 352 (1350) ◽  
pp. 221-229 ◽  
Author(s):  
A. Jones ◽  
A. Slingo
Keyword(s):  
Indirect Effect ◽  
Climate Model ◽  
Number Concentration ◽  
Sea Salt ◽  
Sulphate Aerosol ◽  
Model Studies ◽  
Naturally Occurring ◽  
Sulphate Aerosols ◽  
Hadley Centre ◽  
Atmospheric Concentrations

It is generally believed that increases in the atmospheric concentrations of greenhouse gases as a result of man's activities are leading to global warming. It is also believed that the same activities lead to increasing concentrations of sulphate aerosol, which act to cool the climate system and ameliorate the warming. The sulphate cooling may be separated into the direct effect in cloud–free regions and the indirect effect in cloudy regions. This paper summarizes recent work at the Hadley Centre on the indirect effect. Results from two versions of the hadley Centre Climate Model are shown, using various parameterizations linking the amountof sulphate aerosol and the number concentration of droplets in water clouds. These results illustrate the considerable uncertainties in estimating the indirect effect. It is shown that other naturally occurring components of the aerosol population, in particular sea salt, may be important in reducing the magnitude of the indirect effect.

scholarly journals Significant impact of forcing uncertainty in a large ensemble of climate model simulations

2021 ◽  
Vol 118 (23) ◽  
pp. e2016549118
Author(s):  
John C. Fyfe ◽  
Viatcheslav V. Kharin ◽  
Benjamin D. Santer ◽  
Jason N. S. Cole ◽  
Nathan P. Gillett
Keyword(s):  
Climate Model ◽  
Surface Air Temperature ◽  
System Model ◽  
Earth System ◽  
Anthropogenic Aerosol ◽  
Model Simulations ◽  
Early 21St Century ◽  
Aerosol Forcing ◽  
Climate Model Simulations ◽  
Global Surface

Forcing due to solar and volcanic variability, on the natural side, and greenhouse gas and aerosol emissions, on the anthropogenic side, are the main inputs to climate models. Reliable climate model simulations of past and future climate change depend crucially upon them. Here we analyze large ensembles of simulations using a comprehensive Earth System Model to quantify uncertainties in global climate change attributable to differences in prescribed forcings. The different forcings considered here are those used in the two most recent phases of the Coupled Model Intercomparison Project (CMIP), namely CMIP5 and CMIP6. We show significant differences in simulated global surface air temperature due to volcanic aerosol forcing in the second half of the 19th century and in the early 21st century. The latter arise from small-to-moderate eruptions incorporated in CMIP6 simulations but not in CMIP5 simulations. We also find significant differences in global surface air temperature and Arctic sea ice area due to anthropogenic aerosol forcing in the second half of the 20th century and early 21st century. These differences are as large as those obtained in different versions of an Earth System Model employing identical forcings. In simulations from 2015 to 2100, we find significant differences in the rates of projected global warming arising from CMIP5 and CMIP6 concentration pathways that differ slightly but are equivalent in terms of their nominal radiative forcing levels in 2100. Our results highlight the influence of assumptions about natural and anthropogenic aerosol loadings on carbon budgets, the likelihood of meeting Paris targets, and the equivalence of future forcing scenarios.

scholarly journals Technical Note: On the use of nudging for aerosol-climate model intercomparison studies

2014 ◽  
Vol 14 (7) ◽  
pp. 10311-10343 ◽  
Author(s):  
K. Zhang ◽  
H. Wan ◽  
X. Liu ◽  
S. J. Ghan ◽  
G. J. Kooperman ◽  
...  
Keyword(s):  
Large Scale ◽  
Climate Models ◽  
Climate Model ◽  
Cloud Amount ◽  
Temperature Fields ◽  
Specific Humidity ◽  
Radiation Budget ◽  
Anthropogenic Aerosols ◽  
Anthropogenic Aerosol ◽  
The Impact

Abstract. Nudging is an assimilation technique widely used in the development and evaluation of climate models. Constraining the simulated wind and temperature fields using global weather reanalysis facilitates more straightforward comparison between simulation and observation, and reduces uncertainties associated with natural variabilities of the large-scale circulation. On the other hand, the forcing introduced by nudging can be strong enough to change the basic characteristics of the model climate. In the paper we show that for the Community Atmosphere Model version 5, due to the systematic temperature bias in the standard model and the sensitivity of simulated ice formation to anthropogenic aerosol concentration, nudging towards reanalysis results in substantial reductions in the ice cloud amount and the impact of anthropogenic aerosols on longwave cloud forcing. In order to reduce discrepancies between the nudged and unconstrained simulations and meanwhile take the advantages of nudging, two alternative experimentation methods are evaluated. The first one constrains only the horizontal winds. The second method nudges both winds and temperature, but replaces the long-term climatology of the reanalysis by that of the model. Results show that both methods lead to substantially improved agreement with the free-running model in terms of the top-of-atmosphere radiation budget and cloud ice amount. The wind-only nudging is more convenient to apply, and provides higher correlations of the wind fields, geopotential height and specific humidity between simulation and reanalysis. This suggests nudging the horizontal winds but not temperature is a good strategy for the investigation of aerosol indirect effects through ice clouds, since it provides well-constrained meteorology without strongly perturbing the model's mean climate.

Sign in / Sign up

Export Citation Format

Share Document