scholarly journals Mathematical modeling of palatal suture pattern formation: morphological differences between sagittal and palatal sutures

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Nobuhide Shibusawa ◽  
Yoshie Endo ◽  
Naoki Morimoto ◽  
Ichiro Takahashi ◽  
Takashi Miura
Keyword(s):  
Pattern Formation ◽  
Morphological Characteristics ◽  
Growth Speed ◽  
Sagittal Suture ◽  
Bone Differentiation ◽  
Neonatal Stage ◽  
Growth Center ◽  
The Difference ◽  
Morphological Differences ◽  
Dental Crowding

AbstractThe median palatal suture serves as a growth center for the maxilla; inadequate growth at this site causes malocclusion and dental crowding. However, the pattern formation mechanism of palatal sutures is poorly understood compared with that of calvarial sutures such as the sagittal suture. In the present study, therefore, we compared the morphological characteristics of sagittal and palatal sutures in human bone specimens. We found that palatal suture width was narrower than sagittal suture width, and the interdigitation amplitude of the palatal suture was lower than that of the sagittal suture. These tendencies were also observed in the neonatal stage. However, such differences were not observed in other animals such as chimpanzees and mice. We also used a mathematical model to reproduce the differences between palatal and sagittal sutures. After an extensive parameter search, we found two conditions that could generate the difference in interdigitation amplitude and suture width: bone differentiation threshold $$v_c$$ v c and growth speed c. We discuss possible biological interpretations of the observed pattern difference and its cause.

Inheritance of Some Morphological Characteristics of Parental Lines in Mustard-Rape Hybrid

2020 ◽  
pp. 23-30
Keyword(s):  
First Generation ◽  
Agronomic Traits ◽  
Morphological Characteristics ◽  
Morphological Characters ◽  
Hybrid Plant ◽  
Distant Hybridization ◽  
Degree Of Dominance ◽  
Whole Plant ◽  
Row Width ◽  
The Difference

Distant hybridization is known to play an important role in expanding the gene pool of any crop. It is believed that the combination of different genomes in one nucleus, as a rule, is accompanied by the phenomenon of “genomic shock”, resulting in a variety of genetic and epigenetic changes. This provides a wealth of material for the selection of genotypes adapted to different environmental conditions. Interspecific hybrids in different combinations were obtained in the genus Brassica, however, until now, interest in distant hybridization in this genus has not died out, since such important crops as rapeseed and mustard demand an improvement of many important agronomic traits. The aim of this work was to study the degree of manifestation of morphological characters of a leaf, flower, and plant as a whole in the hybrid obtained by crossing of brown mustard of the variety Slavyanka and a collection specimen of spring rape. Seeds were sown in the spring of 2019 in a field with 30 cm row width. During the flowering period a number of morphological characters of a flower, leaf, and the whole plant were analyzed. Each parameter was evaluated with 10 plants. The degree of dominance in first-generation hybrid was calculated by the formula of Beil, Atkins (1965). The dominance coefficients were not determined in the case when the difference between the parental samples was insignificant. Differences between parental samples were determined by Student t-test. The level of heterosis was calculated according to the formula of Rasul et al (2002). In a mustard-rapeseed hybrid, the size of the leaves of the lower row was inherited by the type of rapeseed, which had larger leaves than mustard. The height of the hybrid plant was inherited by the type of mustard (hp = 1.32, Ht = 4.89%), and intermediate inheritance was observed for the length of the internodes (hp = -0.48). The size of the flower petals and sepals was inherited by the type of rapeseed, and significant heterosis was observed for the length of the pistil (Ht = 33.57%). The data obtained are of interest for understanding the interaction of genes of different genomes in the genus Brassica.

scholarly journals Reading the bed morphology of a mountain stream: a geomorphometric study on high-resolution topographic data

2010 ◽  
Vol 14 (2) ◽  
pp. 393-405 ◽  
Author(s):  
S. Trevisani ◽  
M. Cavalli ◽  
L. Marchi
Keyword(s):  
High Resolution ◽  
Ad Hoc ◽  
Flow Direction ◽  
Spatial Scales ◽  
Mountain Stream ◽  
Topographic Data ◽  
The Difference ◽  
Morphological Differences ◽  
High Level ◽  
Local Anomalies

Abstract. High-resolution topographic data expand the potential of quantitative analysis of the earth surface, improving the interpretation of geomorphic processes. In particular, the morphologies of the channel beds of mountain streams, which are characterised by strong spatial variability, can be analysed much more effectively with this type of data. In this study, we analysed the aerial LiDAR topographic data of a headwater stream, the Rio Cordon (watershed area: 5 km2), located in the Dolomites (north-eastern Italy). The morphology of the channel bed of Rio Cordon is characterised by alternating step pools, cascades, and rapids with steps. We analysed the streambed morphology by means of ad hoc developed morphometric indices, capable of highlighting morphological features at a high level of spatial resolution. To perform the analysis and the data interpolation, we carried out a channel-oriented coordinate transformation. In the new coordinate system, the calculation of morphometric indices in directions along and transverse to the flow direction is straightforward. Three geomorphometric indices were developed and applied as follows: a slope index computed on the whole width of the channel bed, directional variograms computed along the flow direction and perpendicular to it, and local anomalies, calculated as the difference between directional variograms at different spatial scales. Directional variograms in the flow direction and local anomalies have proven to be effective at recognising morphologic units, such as steps, pools and clusters of large boulders. At the spatial scale of channel reaches, these indices have demonstrated a satisfactory capability to outline patterns associated with boulder cascades and rapids with steps, whereas they did not clearly differentiate between morphologies with less marked morphological differences, such as step pools and cascades.

scholarly journals INVESTIGATION ON PRE-TREATMENT PROCESS IN MICROCRYSTALLINE CELLULOSE (MCC) FROM OIL PALM EMPTY FRUIT BUNCH (EFB)

2018 ◽  
Vol 3 (1) ◽  
pp. 87-96
Author(s):  
Muhammad Arif Fahmi Supian ◽  
Khairatun Najwa Mohd Amin ◽  
Saidatul Shima Jamari ◽  
Shahril Mohamad
Keyword(s):  
Microcrystalline Cellulose ◽  
Morphological Characteristics ◽  
Alkaline Treatment ◽  
Empty Fruit Bunch ◽  
Characteristic Peak ◽  
Reinforcing Agent ◽  
Good Potential ◽  
The Mean ◽  
The Difference ◽  
Pre Treatment

In this study, microcrystalline cellulose (MCC) was extracted from empty fruit bunch (EFB) with alkaline treatment, bleaching and acid hydrolysis treatment and its properties were compared with commercial MCC. Two conditions were optimized in this study which are fiber consistency and sodium hydroxide (NaOH) concentration in alkaline pretreatment. The obtained optimum consistency and alkaline concentration are 5% and 20%respectively. The physicochemical and morphological characteristics, elemental composition and size distribution of the obtained alpha cellulose and MCC were analyzed in this work. Fourier transform infrared spectroscopy (FTIR) analysis provided clear evidence that the characteristic peak of lignin and hemicellulose were absent in the spectrum of the alpha cellulose and MCC. The difference in surface morphology and aggregation between alpha cellulose, MCC and commercialized MCC were observed by scanning electron microscopy (SEM). The mean length of approximately 251.3 μm, 41.4 μm and 138.6 μm were measured for alpha cellulose, MCC and commercialized MCC respectively. Thus, the isolated MCC from EFB has a good potential to be utilized as reinforcing agent in green composites and may be a precursor for future roselle derived nanocellulose, and thus a promising subject in nanocomposite research.

The difference of morphological characteristics and population structure in PAO and DPAOgranular sludges

2019 ◽  
Vol 76 ◽  
pp. 388-402 ◽  
Author(s):  
Geumhee Yun ◽  
Hansaem Lee ◽  
Yongsuk Hong ◽  
Sungpyo Kim ◽  
Glen T. Daigger ◽  
...  
Keyword(s):  
Population Structure ◽  
Morphological Characteristics ◽  
The Difference

Ficophagus (Nematoda: Aphelenchoididae) from sycones of Ficus subgenus Urostigma, sections Malvanthera and Urostigma, in eastern Australia

Nematology ◽  
2020 ◽  
Vol 22 (6) ◽  
pp. 627-653
Author(s):  
Kerrie A. Davies ◽  
Faerlie Bartholomaeus ◽  
Dong Mei Li ◽  
Zeng Qi Zhao ◽  
Weimin Ye ◽  
...  
Keyword(s):  
New South ◽  
Morphological Characteristics ◽  
Tail Length ◽  
Female Tail ◽  
South Wales ◽  
Eastern Australia ◽  
Two New Species ◽  
Morphological Differences ◽  
Tail Tip ◽  
Molecular Sequencing

Summary Ficophagus from collecting trips in eastern Australia, made over 15 years, are summarised and show that species of the genus occurred widely in sycones of Ficus, subgenus Urostigma, section Malvanthera. Two new species (based on morphological differences and molecular sequencing) are described: Ficophagus elizabethae sp. n. from Ficus macrophylla, F. rubiginosa and F. obliqua, and Ficophagus richardi sp. n. from Ficus obliqua; and a morphospecies, Ficophagus Morphospecies malandicus from Ficus obliqua. Ficophagus elizabethae sp. n. is characterised by having the excretory pore (EP) opening from the level of the junction of the conus and shaft of the stylet to that of the knobs, a relatively long procorpus (1.0-2.5 times length of stylet), female tail with an obliquely truncate tail with a hyaline area and a finely to broadly rounded tip which may be mucronate; post-vulval uterine sac (PUS) ca one vulval body diam. (VBD) in length; rose-thorn-shaped spicule with distinct rostrum and prominent condylus; and genital papillae arranged as largest pair adcloacal, second pair posterior to mid-tail length, and third small pair near tail tip; and was collected from Sydney in New South Wales, to Bundaberg in Queensland (QLD). Ficophagus richardi sp. n. is characterised by having the EP opening at the level of the junction of the stylet shaft and conus, a labial cap which is raised around the opening for the stylet; procorpus 0.8-1.7 times length of the stylet, PUS <1 VBD in length, long uterus, and female tail with a V-shaped hyaline area at the bluntly rounded tip; rose-thorn-shaped spicule with a small rostrum and prominent condylus, three pairs genital papillae, first and largest on anterior cloacal lip, second at 70% of tail length measured from cloacal aperture, and third near tip, and was collected from Ban Ban Springs in the south to the Bundaberg region in the mid-north of QLD. In addition, in the absence of pertinent molecular sequences, a morphospecies is described. Ficophagus Morphospecies malandicus is characterised by having the EP opening anterior to the junction of the stylet conus and shaft, procorpus 0.9-2 times length of stylet, a short PUS usually <1 VBD long, short uterus, rose-thorn-shaped spicule with a raised condylus and prominent rostrum, and three pairs of subventral papillae on the tail (one adcloacal, one posterior to mid-tail and one near tail tip); and was collected from the Atherton Tableland, QLD. A table comparing morphological characteristics is provided to help with identification of Ficophagus nematodes from figs of the section Malvanthera in eastern Australia.

Confirmation of Aedes koreicus (Diptera: Culicidae) in Belgium and description of morphological differences between Korean and Belgian specimens validated by molecular identification

Zootaxa ◽  
2012 ◽  
Vol 3191 (1) ◽  
pp. 21 ◽  
Author(s):  
VEERLE VERSTEIRT ◽  
JAMES E. PECOR ◽  
DINA M. FONSECA ◽  
MARC COOSEMANS ◽  
WIM VAN BORTEL
Keyword(s):  
Korean Peninsula ◽  
Morphological Characteristics ◽  
Rapid Identification ◽  
Molecular Evidence ◽  
Island Population ◽  
Morphological Comparison ◽  
Aedes Koreicus ◽  
Island Populations ◽  
Molecular Comparison ◽  
Morphological Differences

In 2008, specimens resembling Aedes (Finlaya) koreicus (Edwards) (also Ochlerotatus koreicus or Hulecoeteomyia kore-ica) were found in Belgium during a national mosquito survey (MODIRISK). Small but consistent differences were, how-ever, observed between the specimens described from Peninsula Korea and those found in Belgian. To achieve the correctidentification a detailed morphological comparison was made between the Belgian specimens and reference material fromKorean mainland and island populations housed at the Smithsonian Institution (Walter Reed Biosystematics Unit (WR-BU), Washington, USA). The identification was furthermore supported by molecular evidence based on the ND4 region(mtDNA) of available Korean and Belgian mosquito specimens. Morphological and molecular comparison confirmed theinitial identification of Aedes koreicus. Based on morphological characteristics, the species collected in Belgium mostlikely originated from Jeju-do, an island south of the Korean Peninsula. The observed dissimilarities between Korean andBelgian specimens resembled a number of morphological differences mentioned previously between female adults col-lected on the Korean Peninsula and Jeju-do. This is the first report of Aedes koreicus outside its natural distribution range.A correct and rapid identification of new invading and spreading vector species is crucial for the implementation of effec-tive control measurements. Hence a correct and easy accessible description of all possible variations of species arrivingin new areas is highly recommended. Therefore, a comparative morphological study on the Smithsonian material of thespecies from Korean mainland, island population and from Belgium is given, pictures of the main aberrant characteristicsand scanning electron microscope images of all stages of the species are included and molecular confirmation of the identification based on the mtDNA ND4 region is provided.

Origin, extinction and ancient DNA of a new fossil insular viper: molecular clues of overseas immigration

2020 ◽  
Author(s):  
Enric Torres-Roig ◽  
Kieren J Mitchell ◽  
Josep Antoni Alcover ◽  
Fernando Martínez-Freiría ◽  
Salvador Bailón ◽  
...  
Keyword(s):  
Complete Mitochondrial Genome ◽  
Morphological Characteristics ◽  
Western Mediterranean ◽  
Balearic Islands ◽  
Mediterranean Islands ◽  
North East ◽  
Iberian Population ◽  
Morphological Differences ◽  
A New Species ◽  
Insular Population

Abstract Viperinae is a subfamily of viperid snakes whose fossil record in the Mediterranean islands is, until now, restricted to 12 palaeontological deposits on seven islands. Revision of the material excavated 30 years ago from the Middle/Late Pleistocene–Holocene deposit of Es Pouàs [Eivissa (= Ibiza), Balearic Islands, western Mediterranean] revealed about 6000 bones of a small-sized viper across different stratigraphic levels. Its morphological characteristics are different enough to known species of Vipera to warrant the description of a new species, but the nearly complete mitochondrial genome obtained from this snake based on a sample dated to 16 130 ± 45 bp, suggested it belonged to a new insular population of Lataste’s viper (Vipera latastei), Vipera latastei ebusitana subsp. nov. Phylogenetic analysis indicates that the dispersal of the ancestors of V. l. ebusitana to Eivissa, most probably from a north-east Iberian population, occurred via overwater colonization &lt; 1.5 Mya, well after the Messinian Salinity Crisis (5.97–5.32 Mya) when land bridges allowed terrestrial colonization of the Balearic Islands by mainland faunas. The morphological differences between V. l. ebusitana and the Iberian populations suggest that it is a new dwarf taxon resulting from insular evolutionary processes, becoming extinct shortly after the first human arrival to this island about 4000 years ago.

scholarly journals Crude Oil Degrading Fingerprint and the Overexpression of Oxidase and Invasive Genes for n-hexadecane and Crude Oil Degradation in the Acinetobacter pittii H9-3 Strain

2019 ◽  
Vol 16 (2) ◽  
pp. 188 ◽  
Author(s):  
Yang Wang ◽  
Qiuyu Wang ◽  
Limei Liu
Keyword(s):  
Crude Oil ◽  
Carbon Sources ◽  
Morphological Characteristics ◽  
Oil Degradation ◽  
16S Rdna Sequence Analysis ◽  
Degrading Bacterium ◽  
Branched Alkanes ◽  
Crude Oil Degradation ◽  
Acinetobacter Pittii ◽  
The Difference

A crude oil-degrading bacterium named strain H9-3 was isolated from crude oil contaminated soil in the Northeastern area of China. Based on its morphological characteristics and 16S rDNA sequence analysis, strain H9-3 is affiliated to Acinetobacter pittii in the group of Gammaproteobacteria. The strain was efficient in removing 36.8% of the initial 10 g·L - 1 of crude oil within 21 days. GC-MS was performed and a preference was shown for n-C10, n-C11, i-C14, i-C17, i-C34, n-C12, n-C13, n-C14, n-C27, n-C32 and i-C13, over n-C16, n-C18–C22, n-C24–n-C31, and n-C36. This can be regarded as the specific fingerprint for crude oil degradation by strain H9-3 of Acinetobacter pittii. In addition to crude oil, it was shown that soybean oil and phenols can be utilized as carbon sources by strain H9-3. It was also shown that aniline and α -naphthol cannot be utilized for growth, but they can be tolerated by strain H9-3. Methylbenzene was neither utilized nor tolerated by strain H9-3. Although n-hexadecane was not preferentially consumed by strain H9-3, during culture with crude oil, it could be utilized for growth when it is the sole carbon source. The degradation of some branched alkanes (i-C14, i-C17 and i-C34) and the preferential degradation of crude oil over phenols could be used as a reference for distinguishing A. pittii from A. calcoaceticus. The difference in gene expression was very significant and was induced by diverse carbon sources, as shown in the qRT-PCR results. The oxidation and adhesion events occurred at high frequency during alkane degration by Acinetobacter pittii strain H9-3 cells.

Eucheumatopsis sanibelensis sp. nov. from the Gulf coast of Florida, USA

Phytotaxa ◽  
2020 ◽  
Vol 440 (3) ◽  
pp. 215-224 ◽  
Author(s):  
ELIAS S. PETERSON ◽  
CRAIG W. SCHNEIDER ◽  
GARY W. SAUNDERS
Keyword(s):  
Gulf Coast ◽  
Sequence Data ◽  
Algal Species ◽  
Morphological Characteristics ◽  
Caribbean Sea ◽  
Lsu Rdna ◽  
Eastern Gulf Of Mexico ◽  
Single Location ◽  
Red Algal ◽  
Morphological Differences

Based upon COI-5P, LSU rDNA and rbcL sequence data, as well as its morphological characteristics, a new red algal species, Eucheumatopsis sanibelensis E.S.Peterson, C.W.Schneider et G.W.Saunders sp. nov., was discovered on the Gulf coast of Florida, USA and shown to be distinct from the generitype E. isiformis with a type locality in the eastern Caribbean Sea. The new more attenuate taxon from Sanibel Island represents only the second species in this newly described genus, a genus recently segregated from Eucheuma based upon significant molecular and morphological differences. The two species have overlapping geographic distributions in the eastern Gulf of Mexico, but thus far E. sanibelensis is only known from a single location.

Two new species in the genus Phoxokalliapseudes Drumm & Heard, 2011 (Crustacea: Tanaidacea: Kalliapseudidae) from the southwestern and southern coasts of Korea

Zootaxa ◽  
2017 ◽  
Vol 4231 (3) ◽  
pp. 341 ◽  
Author(s):  
JIN HEE WI ◽  
CHANG-KEUN KANG ◽  
HO YOUNG SOH
Keyword(s):  
New Species ◽  
Developmental Stages ◽  
Size Range ◽  
Morphological Characteristics ◽  
Width Ratio ◽  
Fixed Size ◽  
Type Specimens ◽  
Two New Species ◽  
Comprehensive Comparison ◽  
Morphological Differences

Two new species of Phoxokalliapseudes from the southwestern and southern coasts of Korea are described. Phoxokalliapseudes aculeatus n. sp. is distinguished by the two robust spiniform setae on the ventral margin of the cheliped basis, pereonites 2–6 each with a hyposphaenium and small spinules, and the setiferous lobe on the mandibles with different numbers of serrated spiniform setae in the female and male (five and six, respectively). Phoxokalliapseudes cinctus n. sp. can be distinguished by the propodus of the male cheliped with the largest length to width ratio (2.5: 1) of the genus, and the fixed finger with small denticles on the cutting edge and near the insertion of the dactylus. The female has the largest dactylus to propodus length ratio of pereopod 6 in the genus. Only four species of Phoxokalliapseudes have been described or redescribed previously, of which some exhibit morphological differences with the type specimens, possibly indicating additional new species. To minimize identification difficulties caused by morphometric variations in developmental stages, the morphological characteristics of the new species are described in detail for a fixed size range and compared to different-sized individuals. Additionally, a comprehensive comparison of the new Phoxokalliapseudes species with the other known species is provided and discussed. 

Sign in / Sign up

Export Citation Format

Share Document