scholarly journals Stretchable self-tuning MRI receive coils based on liquid metal technology (LiquiTune)

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Elizaveta Motovilova ◽  
Ek Tsoon Tan ◽  
Victor Taracila ◽  
Jana M. Vincent ◽  
Thomas Grafendorfer ◽  
...  
Keyword(s):  
Liquid Metal ◽  
Signal To Noise Ratio ◽  
Patient Comfort ◽  
Diagnostic Image Quality ◽  
Diagnostic Image ◽  
Radiofrequency Coil ◽  
Offset Distance ◽  
Wide Range ◽  
Comparable Control ◽  
Self Tuning

AbstractMagnetic resonance imaging systems rely on signal detection via radiofrequency coil arrays which, ideally, need to provide both bendability and form-fitting stretchability to conform to the imaging volume. However, most commercial coils are rigid and of fixed size with a substantial mean offset distance of the coil from the anatomy, which compromises the spatial resolution and diagnostic image quality as well as patient comfort. Here, we propose a soft and stretchable receive coil concept based on liquid metal and ultra-stretchable polymer that conforms closely to a desired anatomy. Moreover, its smart geometry provides a self-tuning mechanism to maintain a stable resonance frequency over a wide range of elongation levels. Theoretical analysis and numerical simulations were experimentally confirmed and demonstrated that the proposed coil withstood the unwanted frequency detuning typically observed with other stretchable coils (0.4% for the proposed coil as compared to 4% for a comparable control coil). Moreover, the signal-to-noise ratio of the proposed coil increased by more than 60% as compared to a typical, rigid, commercial coil.

scholarly journals Enhancing Patient Experience With Internet Protocol Addressable Digital LED Lighting in Imaging Environments: A Phase I Study (Preprint)

2018 ◽  
Author(s):  
Melanie U Knopp ◽  
Katherine Binzel ◽  
Chadwick L Wright ◽  
Jun Zhang ◽  
Michael V Knopp
Keyword(s):  
Image Quality ◽  
Patient Experience ◽  
Patient Comfort ◽  
Patient Specific ◽  
Diagnostic Image Quality ◽  
Imaging Studies ◽  
Diagnostic Image ◽  
Clinical Imaging ◽  
Ambient Lighting ◽  
Led Lights

BACKGROUND Conventional approaches to improve the quality of clinical patient imaging studies focus predominantly on updating or replacing imaging equipment; however, it is often not considered that patients can also highly influence the diagnostic quality of clinical imaging studies. Patient-specific artifacts can limit the diagnostic image quality, especially when patients are uncomfortable, anxious, or agitated. Imaging facility or environmental conditions can also influence the patient’s comfort and willingness to participate in diagnostic imaging studies, especially when performed in visually unesthetic, anxiety-inducing, and technology-intensive imaging centers. When given the opportunity to change a single aspect of the environmental or imaging facility experience, patients feel much more in control of the otherwise unfamiliar and uncomfortable setting. Incorporating commercial, easily adaptable, ambient lighting products within clinical imaging environments allows patients to individually customize their environment for a more personalized and comfortable experience. OBJECTIVE The aim of this pilot study was to use a customizable colored light-emitting diode (LED) lighting system within a clinical imaging environment and demonstrate the feasibility and initial findings of enabling healthy subjects to customize the ambient lighting and color. Improving the patient experience within clinical imaging environments with patient-preferred ambient lighting and color may improve overall patient comfort, compliance, and participation in the imaging study and indirectly contribute to improving diagnostic image quality. METHODS We installed consumer-based internet protocol addressable LED lights using the ZigBee standard in different PET/CT scan rooms within a clinical imaging environment. We recruited healthy volunteers (n=35) to generate pilot data in order to develop a subsequent clinical trial. The visual perception assessment procedure utilized questionnaires with preprogrammed light/color settings and further assessed how subjects preferred ambient light and color within a clinical imaging setting. RESULTS Technical implementation using programmable LED lights was performed without any hardware or electrical modifications to the existing clinical imaging environment. Subject testing revealed substantial variabilities in color perception; however, clear trends in subject color preference were noted. In terms of the color hue of the imaging environment, 43% (15/35) found blue and 31% (11/35) found yellow to be the most relaxing. Conversely, 69% (24/35) found red, 17% (6/35) found yellow, and 11% (4/35) found green to be the least relaxing. CONCLUSIONS With the majority of subjects indicating that colored lighting within a clinical imaging environment would contribute to an improved patient experience, we predict that enabling patients to customize environmental factors like lighting and color to individual preferences will improve patient comfort and patient satisfaction. Improved patient comfort in clinical imaging environments may also help to minimize patient-specific imaging artifacts that can otherwise limit diagnostic image quality. CLINICALTRIAL ClinicalTrials.gov NCT03456895; https://clinicaltrials.gov/ct2/show/NCT03456895

scholarly journals Enhancing Patient Experience With Internet Protocol Addressable Digital Light-Emitting Diode Lighting in Imaging Environments: A Phase I Study

10.2196/11839 ◽  
2020 ◽  
Vol 22 (6) ◽  
pp. e11839
Author(s):  
Melanie U Knopp ◽  
Katherine Binzel ◽  
Chadwick L Wright ◽  
Jun Zhang ◽  
Michael V Knopp
Keyword(s):  
Image Quality ◽  
Patient Experience ◽  
Light Emitting Diode ◽  
Patient Comfort ◽  
Patient Specific ◽  
Diagnostic Image Quality ◽  
Imaging Studies ◽  
Diagnostic Image ◽  
Clinical Imaging ◽  
Ambient Lighting

Background Conventional approaches to improve the quality of clinical patient imaging studies focus predominantly on updating or replacing imaging equipment; however, it is often not considered that patients can also highly influence the diagnostic quality of clinical imaging studies. Patient-specific artifacts can limit the diagnostic image quality, especially when patients are uncomfortable, anxious, or agitated. Imaging facility or environmental conditions can also influence the patient’s comfort and willingness to participate in diagnostic imaging studies, especially when performed in visually unesthetic, anxiety-inducing, and technology-intensive imaging centers. When given the opportunity to change a single aspect of the environmental or imaging facility experience, patients feel much more in control of the otherwise unfamiliar and uncomfortable setting. Incorporating commercial, easily adaptable, ambient lighting products within clinical imaging environments allows patients to individually customize their environment for a more personalized and comfortable experience. Objective The aim of this pilot study was to use a customizable colored light-emitting diode (LED) lighting system within a clinical imaging environment and demonstrate the feasibility and initial findings of enabling healthy subjects to customize the ambient lighting and color. Improving the patient experience within clinical imaging environments with patient-preferred ambient lighting and color may improve overall patient comfort, compliance, and participation in the imaging study and indirectly contribute to improving diagnostic image quality. Methods We installed consumer-based internet protocol addressable LED lights using the ZigBee standard in different imaging rooms within a clinical imaging environment. We recruited healthy volunteers (n=35) to generate pilot data in order to develop a subsequent clinical trial. The visual perception assessment procedure utilized questionnaires with preprogrammed light/color settings and further assessed how subjects preferred ambient light and color within a clinical imaging setting. Results Technical implementation using programmable LED lights was performed without any hardware or electrical modifications to the existing clinical imaging environment. Subject testing revealed substantial variabilities in color perception; however, clear trends in subject color preference were noted. In terms of the color hue of the imaging environment, 43% (15/35) found blue and 31% (11/35) found yellow to be the most relaxing. Conversely, 69% (24/35) found red, 17% (6/35) found yellow, and 11% (4/35) found green to be the least relaxing. Conclusions With the majority of subjects indicating that colored lighting within a clinical imaging environment would contribute to an improved patient experience, we predict that enabling patients to customize environmental factors like lighting and color to individual preferences will improve patient comfort and patient satisfaction. Improved patient comfort in clinical imaging environments may also help to minimize patient-specific imaging artifacts that can otherwise limit diagnostic image quality. Trial Registration ClinicalTrials.gov NCT03456895; https://clinicaltrials.gov/ct2/show/NCT03456895

scholarly journals Detectivity optimization to detect of ultraweak light fluxes with an EM-CCD as binary photon counter array

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ibtissame Khaoua ◽  
Guillaume Graciani ◽  
Andrey Kim ◽  
François Amblard
Keyword(s):  
Dynamic Range ◽  
Signal To Noise Ratio ◽  
Photon Counting ◽  
Detection Methods ◽  
Strong Nonlinearity ◽  
Wide Range ◽  
Depth Analysis ◽  
Spatially Extended ◽  
Extended Sources ◽  
Photon Counting Mode

AbstractFor a wide range of purposes, one faces the challenge to detect light from extremely faint and spatially extended sources. In such cases, detector noises dominate over the photon noise of the source, and quantum detectors in photon counting mode are generally the best option. Here, we combine a statistical model with an in-depth analysis of detector noises and calibration experiments, and we show that visible light can be detected with an electron-multiplying charge-coupled devices (EM-CCD) with a signal-to-noise ratio (SNR) of 3 for fluxes less than $$30\,{\text{photon}}\,{\text{s}}^{ - 1} \,{\text{cm}}^{ - 2}$$ 30 photon s - 1 cm - 2 . For green photons, this corresponds to 12 aW $${\text{cm}}^{ - 2}$$ cm - 2 ≈ $$9{ } \times 10^{ - 11}$$ 9 × 10 - 11 lux, i.e. 15 orders of magnitude less than typical daylight. The strong nonlinearity of the SNR with the sampling time leads to a dynamic range of detection of 4 orders of magnitude. To detect possibly varying light fluxes, we operate in conditions of maximal detectivity $${\mathcal{D}}$$ D rather than maximal SNR. Given the quantum efficiency $$QE\left( \lambda \right)$$ Q E λ of the detector, we find $${ \mathcal{D}} = 0.015\,{\text{photon}}^{ - 1} \,{\text{s}}^{1/2} \,{\text{cm}}$$ D = 0.015 photon - 1 s 1 / 2 cm , and a non-negligible sensitivity to blackbody radiation for T > 50 °C. This work should help design highly sensitive luminescence detection methods and develop experiments to explore dynamic phenomena involving ultra-weak luminescence in biology, chemistry, and material sciences.

Modal frequencies of bridges from GNSS (GPS) monitoring data: Experimental, statistical evidence

2021 ◽  
Vol 17 (1-2) ◽  
pp. 3-14
Author(s):  
Stathis C. Stiros ◽  
F. Moschas ◽  
P. Triantafyllidis
Keyword(s):  
Signal To Noise Ratio ◽  
Vertical Axis ◽  
Bridge Monitoring ◽  
Low Snr ◽  
True Value ◽  
Gps Satellites ◽  
Wide Range ◽  
Spectral Peaks ◽  
Monitoring Survey ◽  
True Frequency

GNSS technology (known especially for GPS satellites) for measurement of deflections has proved very efficient and useful in bridge structural monitoring, even for short stiff bridges, especially after the advent of 100 Hz GNSS sensors. Mode computation from dynamic deflections has been proposed as one of the applications of this technology. Apart from formal modal analyses with GNSS input, and from spectral analysis of controlled free attenuating oscillations, it has been argued that simple spectra of deflections can define more than one modal frequencies. To test this scenario, we analyzed 21 controlled excitation events from a certain bridge monitoring survey, focusing on lateral and vertical deflections, recorded both by GNSS and an accelerometer. These events contain a transient and a following oscillation, and they are preceded and followed by intervals of quiescence and ambient vibrations. Spectra for each event, for the lateral and the vertical axis of the bridge, and for and each instrument (GNSS, accelerometer) were computed, normalized to their maximum value, and printed one over the other, in order to produce a single composite spectrum for each of the four sets. In these four sets, there was also marked the true value of modal frequency, derived from free attenuating oscillations. It was found that for high SNR (signal-to-noise ratio) deflections, spectral peaks in both acceleration and displacement spectra differ by up to 0.3 Hz from the true value. For low SNR, defections spectra do not match the true frequency, but acceleration spectra provide a low-precision estimate of the true frequency. This is because various excitation effects (traffic, wind etc.) contribute with numerous peaks in a wide range of frequencies. Reliable estimates of modal frequencies can hence be derived from deflections spectra only if excitation frequencies (mostly traffic and wind) can be filtered along with most measurement noise, on the basis of additional data.

Minimizing table time in patients with claustrophobia using focused ferumoxytol-enhanced MR angiography (f-FEMRA): a feasibility study

2021 ◽  
Vol 94 (1125) ◽  
pp. 20210430
Author(s):  
Puja Shahrouki ◽  
Kim-Lien Nguyen ◽  
John M. Moriarty ◽  
Adam N. Plotnik ◽  
Takegawa Yoshida ◽  
...  
Keyword(s):  
Image Quality ◽  
Mr Angiography ◽  
Signal To Noise Ratio ◽  
Diagnostic Image Quality ◽  
Diagnostic Confidence ◽  
Motion Artefact ◽  
Scan Time ◽  
Wilcoxon Rank Sum Test ◽  
Significant Difference ◽  
Noise Ratio

Objectives: To assess the feasibility of a rapid, focused ferumoxytol-enhanced MR angiography (f-FEMRA) protocol in patients with claustrophobia. Methods: In this retrospective study, 13 patients with claustrophobia expressed reluctance to undergo conventional MR angiography, but agreed to a trial of up to 10 min in the scanner bore and underwent f-FEMRA. Thirteen matched control patients who underwent gadolinium-enhanced MR angiography (GEMRA) were identified for comparison of diagnostic image quality. For f-FEMRA, the time from localizer image acquisition to completion of the angiographic acquisition was measured. Two radiologists independently scored images on both f-FEMRA and GEMRA for arterial and venous image quality, motion artefact and diagnostic confidence using a 5-point scale, five being best. Signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) in the aorta and IVC were measured. The Wilcoxon rank-sum test, one-way ANOVA with Tukey correction and two-tailed t tests were utilized for statistical analyses. Results: All scans were diagnostic and assessed with high confidence (scores ≥ 4). Average scan time for f-FEMRA was 6.27 min (range 3.56 to 10.12 min), with no significant difference between f-FEMRA and GEMRA in diagnostic confidence (4.86 ± 0.24 vs 4.69 ± 0.25, p = 0.13), arterial image quality (4.62 ± 0.57 vs 4.65 ± 0.49, p = 0.78) and motion artefact score (4.58 ± 0.49 vs 4.58 ± 0.28, p > 0.99). f-FEMRA scored significantly better for venous image quality than GEMRA (4.62 ± 0.42 vs 4.19 ± 0.56, p = 0.04). CNR in the IVC was significantly higher for steady-state f-FEMRA than GEMRA regardless of the enhancement phase (p < 0.05). Conclusions: Comprehensive vascular MR imaging of the thorax, abdomen and pelvis can be completed in as little as 5 min within the magnet bore using f-FEMRA, facilitating acceptance by patients with claustrophobia and streamlining workflow. Advances in knowledge: A focused approach to vascular imaging with ferumoxytol can be performed in patients with claustrophobia, limiting time in the magnet bore to 10 min or less, while acquiring fully diagnostic images of the thorax, abdomen and pelvis.

scholarly journals Methods of Power Line Interference Elimination in EMG Signal

2019 ◽  
Vol 40 ◽  
pp. 64-70
Author(s):  
Martina Ladrova ◽  
Radek Martinek ◽  
Jan Nedoma ◽  
Marcel Fajkus
Keyword(s):  
Signal To Noise Ratio ◽  
Notch Filter ◽  
Correlation Coefficients ◽  
Power Line ◽  
Shape Distortion ◽  
Emg Signal ◽  
Wide Range ◽  
Interference Elimination ◽  
Power Line Interference ◽  
Line Interference

Electromyogram (EMG) recordings are often corrupted by the wide range of artifacts, which one of them is power line interference (PLI). The study focuses on some of the well-known signal processing approaches used to eliminate or attenuate PLI from EMG signal. The results are compared using signal-to-noise ratio (SNR), correlation coefficients and Bland-Altman analysis for each tested method: notch filter, adaptive noise canceller (ANC) and wavelet transform (WT). Thus, the power of the remaining noise and shape of the output signal are analysed. The results show that the ANC method gives the best output SNR and lowest shape distortion compared to the other methods.

scholarly journals Improvement of SAXS Lab Equipment by Using Scatterless Apertures

2014 ◽  
Vol 70 (a1) ◽  
pp. C1330-C1330
Author(s):  
Joerg Wiesmann ◽  
Andreas Kleine ◽  
Christopher Umland ◽  
André Beerlink ◽  
Juergen Graf ◽  
...  
Keyword(s):  
Signal To Noise Ratio ◽  
Experimental Setup ◽  
High Flux ◽  
Signal To Noise ◽  
Minimum Diameter ◽  
X Ray ◽  
X Ray Scattering ◽  
Wide Range ◽  
Beam Stop ◽  
Synchrotron Beamlines

Parasitic scattering caused by apertures is a well-known problem in X-ray analytics, which forces users and manufacturers to adapt their experimental setup to this unwanted phenomenon. Increased measurement times due to lower photon fluxes, a lower resolution caused by an enlarged beam stop, a larger beam defining pinhole-to-sample distance due to the integration of an antiscatter guard and generally a lower signal-to-noise ratio leads to a loss in data quality. In this presentation we will explain how the lately developed scatterless pinholes called SCATEX overcome the aforementioned problems. SCATEX pinholes are either made of Germanium or of Tantalum and momentarily have a minimum diameter of 30µm. Thus, these novel apertures are applicable to a wide range of different applications and X-ray energies. We will show measurements which were performed either at home-lab small angle X-ray scattering (SAXS) systems such as the NANOSTAR of Bruker AXS or at synchrotron beamlines. At the PTB four-crystal monochromator beamline at BESSY II data was collected for a comparison of conventional pinholes, scatterless Germanium slit systems and SCATEX pinholes. At the Nanofocus Endstation P03 beamline at PETRA III we compared the performance of our SCATEX apertures with conventional Tungsten slit systems under high flux density conditions.

Sign in / Sign up

Export Citation Format

Share Document