scholarly journals Leaf surface characteristics affect the deposition and distribution of droplets in rice (Oryza sativa L.)

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Guangmei Ji ◽  
Huizhe Chen ◽  
Yuping Zhang ◽  
Jing Xiang ◽  
Yaliang Wang ◽  
...  

AbstractWe studied the effects of leaf surface characteristics on canopy droplet behaviour using two rice cultivars with similar leaf shapes but significantly different leaf surface characteristics: Jia58 (glabrous rice; smooth leaf surface and no burrs) and Yongyou12 (hairy-leaved rice; rough leaf surface covered with burrs). The plants were subjected to spray tests with different spray pressures and nozzle apertures. The results showed that the deposition amount per unit leaf area was significantly higher in the Yongyou12 canopy than in the Jia58 canopy. The diameter, volume median diameter, number median diameter, and coverage of droplets were significantly higher in Yongyou12 than in Jia58, while the coverage density of droplets was significantly lower. The proportion of small droplets of Jia58 is higher than that of Yongyou12. Thus, a larger amount of large-sized droplets could retain on the leaf surface of hairy-leaved rice, and a larger number of small-sized droplets were retained on the leaf surface of glabrous rice. Smaller pressure and larger flow nozzle were conducive to the retention of the Jia58, while Yongyou12 required larger pressure and larger flow nozzles. Ultrastructural analyses revealed that the leaf surface of glabrous rice had no trichomes and more wax than hairy-leaved rice, and the critical surface tension was lower, resulting in the retention of mainly small droplets on its leaf surface and a lower deposition amount. Therefore, in order to increase the deposition of pesticide droplets on the leaf surface in production, glabrous rice should choose nozzles with smaller spray pressure and large flow rate.

Author(s):  
Guna Selvaduray ◽  
Steve Trigwell

Surface characteristics are essential in determining the biocompatibility of medical implants. Surface treatments such as mechanical polishing, electropolishing, passivation and plastic strain of AISI 316L stainless steel was found to affect the critical surface tension, with the combined electropolishing and passivation treatment resulting in the most desirable critical surface tension for biocompatibility. AES and XPS analysis showed that electropolishing results in changing the surface chemical composition significantly. There is significant Cr enrichment on the surface, compared to the bulk. The surface Cr and Fe exist as a combination of oxides and hydroxides.


2011 ◽  
Vol 347-353 ◽  
pp. 2735-2738 ◽  
Author(s):  
Guang Yu Chi ◽  
Yi Shi ◽  
Xin Chen ◽  
Jian Ma ◽  
Tai Hui Zheng

Vegetation which suffers from heavy metal stresses can cause changes of leaf color, shape and structural changes. The spectral characteristics of vegetation leaves is related to leaf thickness, leaf surface characteristics, the content of water, chlorophyll and other pigments. So the eco-physiology changes of plants can be reflected by spectral reflectance. Studies on the spectral response of vegetation to heavy metal stress can provide a theoretical basis for remote sensing monitoring of metal pollution in soils. In recent decades, there are substantial amounts of literature exploring the effects of heavy metals on vegetation spectra.


2013 ◽  
Vol 11 (1) ◽  
pp. 35-45 ◽  
Author(s):  
Aniello Cammarano ◽  
Giovanna Luca ◽  
Eugenio Amendola

AbstractFacile surface modification of polyester films was performed via chemical solutions treatment. Surface hydrolysis was carried out by means of sodium hydroxide solutions, leading to the formation of carboxylate groups. Three commercial polyester films of 100 μm in thickness were used in this work: AryLite™, Mylar™, and Teonex™, hydrolysis time being the main modification parameter. FTIR-ATR analysis, topography and contact angle (CA) measurements, surface free energy (SFE) and T-Peel adhesion tests were carried out to characterize the modified films. A quantitative estimate of the carboxylates surface coverage as a function of treatment time was obtained through a supramolecular approach, i.e. the ionic self-assembly of a tetracationic porphyrin chromophore onto the film surface. The surface free energy and critical surface tension of the hydrolyzed polyesters was evaluated by means of Zisman, Saito, Berthelot and Owens-Wendt methods. It was shown that NaOH solution treatment increases roughness, polarity and surface free energy of polymers. As a result, T-Peel strengths for modified Mylar™ and Teonex™ films were respectively 2.2 and 1.8 times higher than that for the unmodified films, whereas AryLite™ adhesion test failed.


Sign in / Sign up

Export Citation Format

Share Document