Covalent networks through on-surface chemistry in ultra-high vacuum: state-of-the-art and recent developments

2011 ◽  
Vol 13 (32) ◽  
pp. 14283 ◽  
Author(s):  
Grégory Franc ◽  
André Gourdon
1990 ◽  
Vol 43 (5) ◽  
pp. 583
Author(s):  
GL Price

Recent developments in the growth of semiconductor thin films are reviewed. The emphasis is on growth by molecular beam epitaxy (MBE). Results obtained by reflection high energy electron diffraction (RHEED) are employed to describe the different kinds of growth processes and the types of materials which can be constructed. MBE is routinely capable of heterostructure growth to atomic precision with a wide range of materials including III-V, IV, II-VI semiconductors, metals, ceramics such as high Tc materials and organics. As the growth proceeds in ultra high vacuum, MBE can take advantage of surface science techniques such as Auger, RHEED and SIMS. RHEED is the essential in-situ probe since the final crystal quality is strongly dependent on the surface reconstruction during growth. RHEED can also be used to calibrate the growth rate, monitor growth kinetics, and distinguish between various growth modes. A major new area is lattice mismatched growth where attempts are being made to construct heterostructures between materials of different lattice constants such as GaAs on Si. Also described are the new techniques of migration enhanced epitaxy and tilted superlattice growth. Finally some comments are given On the means of preparing large area, thin samples for analysis by other techniques from MBE grown films using capping, etching and liftoff.


2014 ◽  
Vol 18 (2) ◽  
pp. 63 ◽  
Author(s):  
Tatjana Pešić-Brđanin ◽  
Branko L. Dokić

Semiconductor industry is currently facing with thefact that conventional submicron CMOS technology isapproaching the end of their capabilities, at least when it comes toscaling the dimensions of the components. Therefore, muchattention is paid to device technology that use new technologicalstructures and new channel materials. Modern technologicalprocesses, which mainly include ultra high vacuum chemicalvapor deposition, molecular beam epitaxy and metal-organicmolecular vapor deposition, enable the obtaining of ultrathin,crystallographically almost perfect, strained layers of high purity.In this review paper we analyze the role that such layers have inmodern CMOS technologies. It’s given an overview of thecharacteristics of both strain techniques, global and local, withspecial emphasis on performance of NMOS biaxial strain andPMOS uniaxial strain. Due to the improved transport propertiesof strained layers, especially high mobility of charge carriers, theemphasis is on mechanisms to increase the charge mobility ofstrained silicon and germanium, in light of recent developments inCMOS technology.


2013 ◽  
Vol 1533 ◽  
Author(s):  
Marie-Isabelle Baraton

ABSTRACTAmongst the list of the measurands specific to nanoparticles, size and shape definitely matter but surface chemistry is also often cited. While it is now largely recognized that surface composition, structure and reactivity are perhaps the dominant parameters controlling properties of nanoparticles, surface chemistry is one of the key characteristics of nanoparticles which is seldom or inappropriately evaluated, as it has been identified by international organizations (such as ISO, BIPM or CEN). The usual techniques for surface analysis of materials often require ultra-high vacuum (UHV) conditions and are hardly applicable to nanoparticles. Moreover, because the surface chemical composition and reactivity are dependent on the environmental conditions, the results obtained under UHV cannot be extrapolated to nanoparticles in ambient atmosphere or dispersed in liquids.After an analysis of the stakes and challenges in the surface characterization of nanoparticles and a very brief overview of the usual techniques for surface studies, this paper presents the performance of Fourier transform infrared (FTIR) spectroscopy to investigate surface chemical composition, surface reactivity and surface functionalization of nanoparticles. As illustrating examples, the results of the FTIR surface analysis of different kinds of ceramic nanoparticles are discussed with regard to several fields of applications.


2008 ◽  
Vol 125 (3-4) ◽  
pp. 236-242 ◽  
Author(s):  
J. Goering ◽  
U. Burghaus ◽  
B. W. Arey ◽  
O. Eidelman ◽  
A. Zak ◽  
...  

2020 ◽  
Vol 635 ◽  
pp. A199 ◽  
Author(s):  
K.-J. Chuang ◽  
G. Fedoseev ◽  
D. Qasim ◽  
S. Ioppolo ◽  
C. Jäger ◽  
...  

Context. Complex organic molecules (COMs) have been identified toward high- and low-mass protostars as well as molecular clouds, suggesting that these interstellar species originate from the early stage(s) of starformation. The reaction pathways resulting in COMs described by the formula C2HnO, such as acetaldehyde (CH3CHO), vinyl alcohol (CH2CHOH), ketene (CH2CO), and ethanol (CH3CH2OH), are still under debate. Several of these species have been detected in both translucent and dense clouds, where chemical processes are dominated by (ground-state) atom and radical surface reactions. Therefore, efficient formation pathways are needed to account for their appearance well before the so-called catastrophic CO freeze-out stage starts. Aims. In this work, we investigate the laboratory possible solid-state reactions that involve simple hydrocarbons and OH-radicals along with H2O ice under translucent cloud conditions (1 ≤ AV ≤ 5 and nH ~ 103 cm−3). We focus on the interactions of C2H2 with H-atoms and OH-radicals, which are produced along the H2O formation sequence on grain surfaces at 10 K. Methods. Ultra-high vacuum experiments were performed to study the surface chemistry observed during C2H2 + O2 + H codeposition, where O2 was used for the in situ generation of OH-radicals. These C2H2 experiments were extended by a set of similar experiments involving acetaldehyde (CH3CHO) – an abundant product of C2H2 + O2 + H codeposition. Reflection absorption infrared spectroscopy was applied to in situ monitor the initial and newly formed species. After that, a temperature-programmed desorption experiment combined with a quadrupole mass spectrometer was used as a complementary analytical tool. The IR and QMS spectral assignments were further confirmed in isotope labeling experiments using 18O2. Results. The investigated 10 K surface chemistry of C2H2 with H-atoms and OH-radicals not only results in semi and fully saturated hydrocarbons, such as ethylene (C2H4) and ethane (C2H6), but it also leads to the formation of COMs, such as vinyl alcohol, acetaldehyde, ketene, ethanol, and possibly acetic acid. It is concluded that OH-radical addition reactions to C2H2, acting as a molecular backbone, followed by isomerization (i.e., keto-enol tautomerization) via an intermolecular pathway and successive hydrogenation provides so far an experimentally unreported solid-state route for the formation of these species without the need of energetic input. The kinetics of acetaldehyde reacting with impacting H-atoms leading to ketene and ethanol is found to have a preference for the saturated product. The astronomical relevance of the reaction network introduced here is discussed.


1993 ◽  
Vol 334 ◽  
Author(s):  
Wen-Shryang Liu ◽  
Gregory B. Aupp

AbstractTemperature programmed desorption (TPD) studies in ultra high vacuum revealed that diethyltellurium (DETe) and dimethylcadmium (DMCd) adsorb weakly on clean Si(100) and desorb upon heating without decomposing. These precursors adsorb both weakly and strongly on CdTe(111)A, with DMCd exhibiting the stronger interaction with the surface than DETe. Dimethylcadmium partially decomposes to produce Cd adatoms; a large fraction of the excess Cd atoms desorb upon heating. In contrast, DETe desorbs without decomposing, suggesting that the rate limiting step in CdTe MOCVD on CdTe(111)A is surface decomposition of the tellurium alkyl.


2018 ◽  
Vol 617 ◽  
pp. A87 ◽  
Author(s):  
K.-J. Chuang ◽  
G. Fedoseev ◽  
D. Qasim ◽  
S. Ioppolo ◽  
E. F. van Dishoeck ◽  
...  

Context. In dense clouds, hydrogenation reactions on icy dust grains are key in the formation of molecules, like formaldehyde, methanol, and complex organic molecules (COMs). These species form through the sequential hydrogenation of CO ice. Although molecular hydrogen (H2) abundances can be four orders of magnitude higher than those of free H-atoms in dense clouds, H2 surface chemistry has been largely ignored; several laboratory studies show that H2 does not actively participate in “non-energetic” ice chemistry because of the high activation energies required. Aims. For the example of CO ice hydrogenation, we experimentally investigated the potential role of H2 molecules on the surface chemistry when energetic processing (i.e., UV photolysis) is involved. We test whether additional hydrogenation pathways become available upon UV irradiation of a CO:H2 ice mixture and whether this reaction mechanism also applies to other chemical systems. Methods. Ultra-high vacuum (UHV) experiments were performed at 8–20 K. A pre-deposited solid mixture of CO:H2 was irradiated with UV-photons. Reflection absorption infrared spectroscopy (RAIRS) was used as an in situ diagnostic tool. Single reaction steps and possible isotopic effects were studied by comparing results from CO:H2 and CO:D2 ice mixtures. Results. After UV-irradiation of a CO:H2 ice mixture, two photon-induced products, HCO and H2CO, are unambiguously detected. The proposed reaction mechanism involves electronically excited CO in the following reaction steps: CO + hν→CO*, CO* + H2→HCO + H where newly formed H-atoms are then available for further hydrogenation reactions. The HCO formation yields have a strong temperature dependence for the investigated regime, which is most likely linked to the H2 sticking coefficient. Moreover, the derived formation cross section reflects a cumulative reaction rate that mainly determined by both the H-atom diffusion rate and initial concentration of H2 at 8–20 K and that is largely determined by the H2 sticking coefficient. Finally, the astronomical relevance of this photo-induced reaction channel is discussed.


Sign in / Sign up

Export Citation Format

Share Document