Electrospun carbon nanofibers surface-grown with carbon nanotubes and polyaniline for use as high-performance electrode materials of supercapacitors

RSC Advances ◽  
2014 ◽  
Vol 4 (45) ◽  
pp. 23622-23629 ◽  
Author(s):  
Zhengping Zhou ◽  
Xiang-Fa Wu ◽  
Haoqing Hou
Keyword(s):  
Carbon Nanotubes ◽  
Electrochemical Performance ◽  
Carbon Nanofibers ◽  
Electrode Material ◽  
High Performance ◽  
Electrode Materials

This paper reports the synthesis and electrochemical performance of carbon nanofibers (CNFs) surface-grown with carbon nanotubes (CNTs) and nanostructured polyaniline (PANI) films, i.e., PANI/CNT/CNF, for use as a high-performance electrode material of pseudosupercapacitors.

scholarly journals Development of 3D-Printed MWCNTs/AC/BNNTs Ternary Composite Electrode Material with High-Capacitance Performance

2021 ◽  
Vol 11 (6) ◽  
pp. 2636
Author(s):  
Asrar Alam ◽  
Ghuzanfar Saeed ◽  
Seong Min Hong ◽  
Sooman Lim
Keyword(s):  
Electrochemical Performance ◽  
Current Density ◽  
Electrode Material ◽  
High Performance ◽  
Composite Electrode ◽  
Electrode Materials ◽  
Potential Candidate ◽  
Ternary Composite ◽  
Capacitance Performance ◽  
Capacitive Properties

Activated carbon (AC) and multiwalled carbon nanotubes (MWCNTs) have been extensively investigated in recent decades as electrical double-layer capacitor (EDLC) electrode materials for supercapacitors, owing to their superior capacitive properties and cycling stability performance. However, in the modern electronics industry, ternary electrode materials have been designed to develop high-performance and efficient energy storage devices. EDLC-based ternary materials are of great importance, where all the present components participate both individually and as a multicomponent electrode system to promote high-electrochemical performance electrode materials. In this study, we have incorporated an optimized content of boron nitride nanotube (BNNT) powder into a binary material composed of AC and MWCNTs to enhance their electrochemical performance using a pneumatic printer. The printed MWCNTs/AC/BNNTs ternary composite electrode material has shown a maximum specific capacitance of 262 F g−1 at a minimum current density of 1 A g−1, with a capacitance retention of 49.61% at a maximum current density of 10 A g−1. These results demonstrate that the printable MWCNTs/AC/BNNTs ternary composite electrode material is a potential candidate for the development of high-performance supercapacitors.

3D hierarchical porous N-doped carbon quantum dots/vanadium nitride hybrid microflowers as a superior electrode material toward high-performance asymmetric capacitive deionization

2021 ◽  
Author(s):  
Jingxuan Zhao ◽  
Zhibo Zhao ◽  
Yang Sun ◽  
Xiangdong Ma ◽  
Meidan Ye ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Electrode Material ◽  
High Performance ◽  
Carbon Nanomaterials ◽  
Electrode Materials ◽  
Carbon Quantum Dots ◽  
Vanadium Nitride ◽  
Capacitive Deionization ◽  
Hierarchical Porous

Taking into account of time-confusing preparation processing and unsatisfied desalination capacity of carbon nanomaterials, exploring efficient electrode materials remains a great challenge for practical capacitive deionization (CDI) application. In this...

Synergistic effect of carbon nanotubes and graphitic carbon nitride on the enhanced supercapacitor performance of cobalt diselenide-based composites

2021 ◽  
Author(s):  
Mingjie Li ◽  
Xuan Zheng ◽  
Xiang Li ◽  
Youjun Yu ◽  
Jinlong Jiang
Keyword(s):  
Carbon Nanotubes ◽  
Transition Metal ◽  
Synergistic Effect ◽  
Hydrothermal Method ◽  
High Performance ◽  
Carbon Nitride ◽  
Electrode Materials ◽  
One Dimensional ◽  
Supercapacitor Performance ◽  
Metal Selenides

Recently, transition metal selenides have been investigated extensively as promising electrode materials for high-performance supercapacitors. Herein, the multi-component CoSe2/CNTs@g-C3N4 composites are prepared using a two-step hydrothermal method by incorporating one-dimensional...

scholarly journals Fabrication of Hierarchical NiMoO4/NiMoO4 Nanoflowers on Highly Conductive Flexible Nickel Foam Substrate as a Capacitive Electrode Material for Supercapacitors with Enhanced Electrochemical Performance

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1143 ◽  
Author(s):  
Anil Yedluri ◽  
Tarugu Anitha ◽  
Hee-Je Kim
Keyword(s):  
Energy Density ◽  
Electrochemical Performance ◽  
Specific Capacitance ◽  
Electrode Material ◽  
High Performance ◽  
Nickel Foam ◽  
High Specific Capacitance ◽  
High Energy ◽  
High Energy Density ◽  
Charge Discharge

Hierarchical NiMoO4/NiMoO4 nanoflowers were fabricated on highly conductive flexible nickel foam (NF) substrates using a facile hydrothermal method to achieve rapid charge-discharge ability, high energy density, long cycling lifespan, and higher flexibility for high-performance supercapacitor electrode materials. The synthesized composite electrode material, NF/NiMoO4/NiMoO4 with a nanoball-like NF/NiMoO4 structure on a NiMoO4 surface over a NF substrate, formed a three-dimensional interconnected porous network for high-performance electrodes. The novel NF/NiMoO4/NiMoO4 nanoflowers not only enhanced the large surface area and increased the electrochemical activity, but also provided an enhanced rapid ion diffusion path and reduced the charge transfer resistance of the entire electrode effectively. The NF/NiMoO4/NiMoO4 composite exhibited significantly improved supercapacitor performance in terms of a sustained cycling life, high specific capacitance, rapid charge-discharge capability, high energy density, and good rate capability. Electrochemical analysis of the NF/NiMoO4/NiMoO4 nanoflowers fabricated on the NF substrate revealed ultra-high electrochemical performance with a high specific capacitance of 2121 F g−1 at 12 mA g−1 in a 3 M KOH electrolyte and 98.7% capacitance retention after 3000 cycles at 14 mA g−1. This performance was superior to the NF/NiMoO4 nanoball electrode (1672 F g−1 at 12 mA g−1 and capacitance retention 93.4% cycles). Most importantly, the SC (NF/NiMoO4/NiMoO4) device displayed a maximum energy density of 47.13 W h kg−1, which was significantly higher than that of NF/NiMoO4 (37.1 W h kg−1). Overall, the NF/NiMoO4/NiMoO4 composite is a suitable material for supercapacitor applications.

scholarly journals Investigation on the Mass Distribution and Chemical Compositions of Various Ionic Liquids-Extracted Coal Fragments and Their Effects on the Electrochemical Performance of Coal-Derived Carbon Nanofibers (CCNFs)

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 664
Author(s):  
Shuai Tan ◽  
Theodore John Kraus ◽  
Mitchell Ross Helling ◽  
Rudolph Kurtzer Mignon ◽  
Franco Basile ◽  
...  
Keyword(s):  
Ionic Liquids ◽  
Electrochemical Performance ◽  
Carbon Nanofibers ◽  
Mass Distribution ◽  
Electrode Materials ◽  
Gas Chromatography Mass Spectrometry ◽  
Electrochemical Performances ◽  
Diffusion Resistance ◽  
Chemical Compositions ◽  
Holistic Understanding

Coal-derived carbon nanofibers (CCNFs) have been recently found to be a promising and low-cost electrode material for high-performance supercapacitors. However, the knowledge gap still exists between holistic understanding of coal precursors derived from different solvents and resulting CCNFs’ properties, prohibiting further optimization of their electrochemical performance. In this paper, assisted by laser desorption/ionization (LDI) and gas chromatography–mass spectrometry (GC–MS) technologies, a systematic study was performed to holistically characterize mass distribution and chemical composition of coal precursors derived from various ionic liquids (ILs) as extractants. Sequentially, X-ray photoelectron spectroscopy (XPS) revealed that the differences in chemical properties of various coal products significantly affected the surface oxygen concentrations and certain species distributions on the CCNFs, which, in turn, determined the electrochemical performances of CCNFs as electrode materials. We report that the CCNF that was produced by an oxygen-rich coal fragment from C6mimCl ionic liquid extraction showed the highest concentrations of quinone and ester groups on the surface. Consequentially, C6mimCl-CCNF achieved the highest specific capacitance and lowest ion diffusion resistance. Finally, a symmetric carbon/carbon supercapacitor fabricated with such CCNF as electrode delivered an energy density of 21.1 Wh/kg at the power density of 0.6 kW/kg, which is comparable to commercial active carbon supercapacitors.

Self-assembly synthesis of nitrogen-doped mesoporous carbons used as high-performance electrode materials in lithium-ion batteries and supercapacitors

2017 ◽  
Vol 41 (21) ◽  
pp. 12901-12909 ◽  
Author(s):  
Chunfeng Shao ◽  
Ziqiang Wang ◽  
Errui Wang ◽  
Shujun Qiu ◽  
Hailiang Chu ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Lithium Ion Batteries ◽  
Self Assembly ◽  
High Performance ◽  
Electrode Materials ◽  
Lithium Ion ◽  
Mesoporous Carbons ◽  
Nitrogen Doped ◽  
First Time ◽  
Enhanced Electrochemical Performance

Guanine was, for the first time, used as a nitrogen source during the synthesis of nitrogen-doped porous carbons (NMCs) with enhanced electrochemical performance.

Highly ordered nanoscale phosphomolybdate-grafted polyaniline/metal hybrid layered structures prepared via secondary sputtering phenomenon as high-performance pseudocapacitor electrodes

2021 ◽  
Author(s):  
Eun Seop Yoon ◽  
Bong Gill Choi ◽  
Hwan-Jin Jeon
Keyword(s):  
Electron Transfer ◽  
Aspect Ratio ◽  
Electrochemical Performance ◽  
High Aspect Ratio ◽  
High Performance ◽  
Electrode Materials ◽  
Rate Capability ◽  
High Specific Capacitance ◽  
High Rate ◽  
Large Area

Abstract The development of energy storage electrode materials is important for enhancing the electrochemical performance of supercapacitors. Despite extensive research on improving electrochemical performance with polymer-based materials, electrode materials with micro/nanostructures are needed for fast and efficient ion and electron transfer. In this work, highly ordered phosphomolybdate (PMoO)-grafted polyaniline (PMoO-PAI) deposited onto Au hole-cylinder nanopillar arrays is developed for high-performance pseudocapacitors. The three-dimensional nanostructured arrays are easily fabricated by secondary sputtering lithography, which has recently gained attention and features a high resolution of 10 nm, a high aspect ratio greater than 20, excellent uniformity/accuracy/precision, and compatibility with large area substrates. These 10nm scale Au nanostructures with a high aspect ratio of ~30 on Au substrates facilitate efficient ion and electron transfer. The resultant PMoO-PAI electrode exhibits outstanding electrochemical performance, including a high specific capacitance of 114 mF/cm2, a high-rate capability of 88%, and excellent long-term stability.

Synthesis of High-Performance Hard Carbon from Waste Coffee Ground as Sodium Ion Battery Anode Material: A Review

2021 ◽  
Vol 1044 ◽  
pp. 25-39
Author(s):  
Hafid Khusyaeri ◽  
Dewi Pratiwi ◽  
Haris Ade Kurniawan ◽  
Anisa Raditya Nurohmah ◽  
Cornelius Satria Yudha ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Electrode Material ◽  
High Performance ◽  
Production Costs ◽  
Sodium Ion ◽  
Carbon Anode ◽  
Sodium Ion Battery ◽  
Sodium Ion Batteries ◽  
Hard Carbon ◽  
Coffee Grounds

The battery is a storage medium for electrical energy for electronic devices developed effectively and efficiently. Sodium ion battery provide large-scale energy storage systems attributed to the natural existence of the sodium element on earth. The relatively inexpensive production costs and abundant sodium resources in nature make sodium ion batteries attractive to research. Currently, sodium ion batteries electrochemical performance is still less than lithium-ion batteries. The electrochemical performance of a sodium ion battery depends on the type of electrode material used in the manufacture of the batteries.. The main problem is to find a suitable electrode material with a high specific capacity and is stable. It is a struggle to increase the performance of sodium ion batteries. This literature study studied how to prepare high-performance sodium battery anodes through salt doping. The doping method is chosen to increase conductivity and electron transfer. Besides, this method still takes into account the factors of production costs and safety. The abundant coffee waste biomass in Indonesia was chosen as a precursor to preparing a sodium ion battery hard carbon anode to overcome environmental problems and increase the economic value of coffee grounds waste. Utilization of coffee grounds waste as hard carbon is an innovative solution to the accumulation of biomass waste and supports environmentally friendly renewable energy sources in Indonesia.

Sign in / Sign up

Export Citation Format

Share Document