Comprehending the effect of MMoO4 (M = Co, Ni) nanoflakes on improving the electrochemical performance of NiO electrodes

2015 ◽  
Vol 44 (48) ◽  
pp. 21131-21140 ◽  
Author(s):  
Lei An ◽  
Wenyao Li ◽  
Yunjiu Cao ◽  
Kaibing Xu ◽  
Rujia Zou ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Specific Capacitance ◽  
High Specific Capacitance ◽  
Cycling Stability ◽  
Nanosheet Array ◽  
Array Electrode

The hierarchical heterostructures of a NiO@MMoO4 (M = Co, Ni) nanosheet array electrode demonstrated remarkable electrochemical performance with a high specific capacitance and predominant cycling stability.

N-doped porous carbon derived from walnut shells with enhanced electrochemical performance for supercapacitor

2019 ◽  
Vol 12 (03) ◽  
pp. 1950042 ◽  
Author(s):  
Yunfeng Wang ◽  
Honghui Jiang ◽  
Shewen Ye ◽  
Jiaming Zhou ◽  
Jiahao Chen ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Specific Capacitance ◽  
Porous Carbon ◽  
Low Cost ◽  
High Specific Capacitance ◽  
Cycling Stability ◽  
Electrochemical Performances ◽  
Walnut Shells ◽  
Electrochemical Cycling ◽  
Elemental Doping

As the low-cost, natural multi-component for elemental doping and environment-friendly characteristics, biomass-derived porous carbon for energy storage attracts intense attention. Herein, walnut shells-based porous carbon has been obtained through carbonization, hydrothermal and activation treatment. The corresponding porous carbon owns superior electrochemical performances with specific capacitance reaching up to 462[Formula: see text]F[Formula: see text]g[Formula: see text] at 1[Formula: see text]A[Formula: see text]g[Formula: see text], and shows excellent cycling stability (5000 cycles, [Formula: see text]94.2% of capacitance retention at 10[Formula: see text]A[Formula: see text]g[Formula: see text]). Moreover, the symmetry supercapacitor achieves high specific capacitance (197[Formula: see text]F[Formula: see text]g[Formula: see text] at 1[Formula: see text]A[Formula: see text]g[Formula: see text]), relevant electrochemical cycling stability (5000 cycles, 89.2% of capacitance retention at 5[Formula: see text]A[Formula: see text]g[Formula: see text]) and high power/energy density (42.8[Formula: see text]W[Formula: see text]h[Formula: see text]kg[Formula: see text] at 1249[Formula: see text]W[Formula: see text]kg[Formula: see text]). Therefore, the facile synthesis approach and superb electrochemical performance ensure that the walnut shells-derived porous carbon is a promising electrode material candidate for supercapacitors.

A hierarchical NiO/NiMn-layered double hydroxide nanosheet array on Ni foam for high performance supercapacitors

2017 ◽  
Vol 46 (23) ◽  
pp. 7388-7391 ◽  
Author(s):  
Peng-Fei Liu ◽  
Jiao-Jiao Zhou ◽  
Guo-Chang Li ◽  
Meng-Ke Wu ◽  
Kai Tao ◽  
...  
Keyword(s):  
Specific Capacitance ◽  
Layered Double Hydroxide ◽  
High Performance ◽  
High Specific Capacitance ◽  
Cycling Stability ◽  
Ni Foam ◽  
Nanosheet Array ◽  
Double Hydroxide ◽  
Good Cycling Stability

A hierarchical NiO/NiMn-LDH nanosheet array on Ni foam was preparedviaa facile two-step approach and exhibited a high specific capacitance (937 F g−1at 0.5 A g−1) and good cycling stability (91% retention after 1000 cycles at 5 A g−1).

Mechanism analysis of the capacitance contributions and ultralong cycling-stability of the isomorphous MnO2@MnO2 core/shell nanostructures for supercapacitors

2015 ◽  
Vol 3 (11) ◽  
pp. 6168-6176 ◽  
Author(s):  
Jiajia Shao ◽  
Xiying Zhou ◽  
Qian Liu ◽  
Rujia Zou ◽  
Wenyao Li ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Specific Capacitance ◽  
Hydrothermal Process ◽  
High Specific Capacitance ◽  
Cycling Stability ◽  
Core Shell ◽  
Mechanism Analysis ◽  
Shell Nanostructures ◽  
Excellent Cycling Stability ◽  
Facile Hydrothermal Process

The isomorphous MnO2@MnO2 core/shell nanostructures synthesized through a facile hydrothermal process showed remarkable electrochemical performance, i.e., a high specific capacitance with excellent cycling stability.

scholarly journals Advanced binder-free electrodes based on CoMn2O4@Co3O4 core/shell nanostructures for high-performance supercapacitors

RSC Advances ◽  
2018 ◽  
Vol 8 (55) ◽  
pp. 31594-31602 ◽  
Author(s):  
Xiaobo Chen ◽  
Xiao Liu ◽  
Yongxu Liu ◽  
Yameng Zhu ◽  
Guoce Zhuang ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Specific Capacitance ◽  
High Performance ◽  
High Specific Capacitance ◽  
Cycling Stability ◽  
Core Shell ◽  
Ni Foam ◽  
Asymmetric Supercapacitors ◽  
Shell Nanostructures ◽  
Binder Free

CoMn2O4@Co3O4 core/shell arrays on Ni foam exhibit outstanding electrochemical performance for asymmetric supercapacitors with respect to high specific capacitance and high cycling stability.

Poly(aniline-co-pyrrole)-coated Ni-doped manganese dioxide as electrode materials for supercapacitors

2020 ◽  
Vol 13 (02) ◽  
pp. 2051007
Author(s):  
Jie Dong ◽  
Qinghao Yang ◽  
Qiuli Zhao ◽  
Zhenzhong Hou ◽  
Yue Zhou ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Manganese Dioxide ◽  
Specific Capacitance ◽  
Electrode Materials ◽  
High Specific Capacitance ◽  
Cycle Stability ◽  
Mass Ratio ◽  
Scan Rate ◽  
Poly Aniline ◽  
Inorganic And Organic

Electrode materials with a high specific capacitance, outstanding reversibility and excellent cycle stability are constantly pursued for supercapacitors. In this paper, we present an approach to improve the electrochemical performance by combining the advantages of both inorganic and organic. Ni-MnO2/PANi-co-PPy composites are synthesized, with the copolymer of aniline/pyrrole being coated on the surface of Ni-doped manganese dioxide nanospheres. The inorganic–organic composite enables a substantial increase in its specific capacitance and cycle stability. When the mass ratio of Ni-MnO2 to aniline and pyrrole mixed monomer is 1:5, the composite delivers high specific capacitance of 445.49[Formula: see text]F/g at a scan rate of 2[Formula: see text]mV/s and excellent cycle stability of 61.65% retention after 5000 cycles. The results indicate that the Ni-MnO2/PANi-co-PPy composites are promising electrode materials for future supercapacitors application.

scholarly journals Fabrication of Hierarchical NiMoO4/NiMoO4 Nanoflowers on Highly Conductive Flexible Nickel Foam Substrate as a Capacitive Electrode Material for Supercapacitors with Enhanced Electrochemical Performance

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1143 ◽  
Author(s):  
Anil Yedluri ◽  
Tarugu Anitha ◽  
Hee-Je Kim
Keyword(s):  
Energy Density ◽  
Electrochemical Performance ◽  
Specific Capacitance ◽  
Electrode Material ◽  
High Performance ◽  
Nickel Foam ◽  
High Specific Capacitance ◽  
High Energy ◽  
High Energy Density ◽  
Charge Discharge

Hierarchical NiMoO4/NiMoO4 nanoflowers were fabricated on highly conductive flexible nickel foam (NF) substrates using a facile hydrothermal method to achieve rapid charge-discharge ability, high energy density, long cycling lifespan, and higher flexibility for high-performance supercapacitor electrode materials. The synthesized composite electrode material, NF/NiMoO4/NiMoO4 with a nanoball-like NF/NiMoO4 structure on a NiMoO4 surface over a NF substrate, formed a three-dimensional interconnected porous network for high-performance electrodes. The novel NF/NiMoO4/NiMoO4 nanoflowers not only enhanced the large surface area and increased the electrochemical activity, but also provided an enhanced rapid ion diffusion path and reduced the charge transfer resistance of the entire electrode effectively. The NF/NiMoO4/NiMoO4 composite exhibited significantly improved supercapacitor performance in terms of a sustained cycling life, high specific capacitance, rapid charge-discharge capability, high energy density, and good rate capability. Electrochemical analysis of the NF/NiMoO4/NiMoO4 nanoflowers fabricated on the NF substrate revealed ultra-high electrochemical performance with a high specific capacitance of 2121 F g−1 at 12 mA g−1 in a 3 M KOH electrolyte and 98.7% capacitance retention after 3000 cycles at 14 mA g−1. This performance was superior to the NF/NiMoO4 nanoball electrode (1672 F g−1 at 12 mA g−1 and capacitance retention 93.4% cycles). Most importantly, the SC (NF/NiMoO4/NiMoO4) device displayed a maximum energy density of 47.13 W h kg−1, which was significantly higher than that of NF/NiMoO4 (37.1 W h kg−1). Overall, the NF/NiMoO4/NiMoO4 composite is a suitable material for supercapacitor applications.

Fabrication of nickel-foam-supported layered zinc–cobalt hydroxide nanoflakes for high electrochemical performance in supercapacitors

2014 ◽  
Vol 50 (76) ◽  
pp. 11188-11191 ◽  
Author(s):  
Peng Yuan ◽  
Ning Zhang ◽  
Dan Zhang ◽  
Tao Liu ◽  
Limiao Chen ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Specific Capacitance ◽  
Electrode Materials ◽  
Solvothermal Method ◽  
Nickel Foam ◽  
Cycling Stability ◽  
Cobalt Hydroxide ◽  
Facile Solvothermal Method

Nickel foam supported Zn–Co hydroxide nanoflakes were fabricated by a facile solvothermal method, which exhibited excellent specific capacitance and remarkable cycling stability as electrode materials in supercapacitors.

scholarly journals Electrochemical Performance of Aluminum Doped Ni1−xAlxCo2O4 Hierarchical Nanostructure: Experimental and Theoretical Study

Processes ◽  
2021 ◽  
Vol 9 (10) ◽  
pp. 1750
Author(s):  
Deepa Guragain ◽  
Romakanta Bhattarai ◽  
Jonghyun Choi ◽  
Wang Lin ◽  
Ram Krishna Gupta ◽  
...  
Keyword(s):  
Energy Density ◽  
Electrochemical Performance ◽  
Band Gap ◽  
Specific Capacitance ◽  
Surface Area ◽  
Power Density ◽  
High Power ◽  
Energy Band ◽  
High Specific Capacitance ◽  
High Power Density

For electrochemical supercapacitors, nickel cobaltite (NiCo2O4) has emerged as a new energy storage material. The electrocapacitive performance of metal oxides is significantly influenced by their morphology and electrical characteristics. The synthesis route can modulate the morphological structure, while their energy band gaps and defects can vary the electrical properties. In addition to modifying the energy band gap, doping can improve crystal stability and refine grain size, providing much-needed surface area for high specific capacitance. This study evaluates the electrochemical performance of aluminum-doped Ni1−xAlxCo2O4 (0 ≤ x ≤ 0.8) compounds. The Ni1−xAlxCo2O4 samples were synthesized through a hydrothermal method by varying the Al to Ni molar ratio. The physical, morphological, and electrochemical properties of Ni1−xAlxCo2O4 are observed to vary with Al3+ content. A morphological change from urchin-like spheres to nanoplate-like structures with a concomitant increase in the surface area, reaching up to 189 m2/g for x = 0.8, was observed with increasing Al3+ content in Ni1−xAlxCo2O4. The electrochemical performance of Ni1−xAlxCo2O4 as an electrode was assessed in a 3M KOH solution. The high specific capacitance of 512 F/g at a 2 mV/s scan rate, 268 F/g at a current density of 0.5 A/g, and energy density of 12.4 Wh/kg was observed for the x = 0.0 sample, which was reduced upon further Al3+ substitution. The as-synthesized Ni1−xAlxCo2O4 electrode exhibited a maximum energy density of 12.4 W h kg−1 with an outstanding high-power density of approximately 6316.6 W h kg−1 for x = 0.0 and an energy density of 8.7 W h kg−1 with an outstanding high-power density of approximately 6670.9 W h kg−1 for x = 0.6. The capacitance retention of 97% and 108.52% and the Coulombic efficiency of 100% and 99.24% were observed for x = 0.0 and x = 0.8, respectively. First-principles density functional theory (DFT) calculations show that the band-gap energy of Ni1−xAlxCo2O4 remained largely invariant with the Al3+ substitution for low Al3+ content. Although the capacitance performance is reduced upon Al3+ doping, overall, the Al3+ doped Ni1−xAlxCo2O4 displayed good energy, powder density, and retention performance. Thus, Al3+ could be a cost-effective alternative in replacing Ni with the performance trade off.

Ultrathin Nanosheets-Assembled Nickel-Based Metal-Organic Framework Microflowers for Supercapacitor Application

2022 ◽  
Author(s):  
Chong-Huan Wang ◽  
Da-Wei Zhang ◽  
Shude Liu ◽  
Yusuke Yamauchi ◽  
Fei-Bao Zhang ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Specific Capacitance ◽  
Electrode Material ◽  
Metal Organic Framework ◽  
Rate Capability ◽  
High Specific Capacitance ◽  
Supercapacitor Application ◽  
Ultrathin Nanosheets ◽  
Metal Organic ◽  
Organic Framework

Herein, we propose a solvent-assisted approach for preparing Ni-MOF microflowers with high specific capacitance and excellent rate capability as an electrode material for supercapacitors. Such high electrochemical performance is attributed...

Controllable synthesis of 3D hierarchical bismuth compounds with good electrochemical performance for advanced energy storage devices

RSC Advances ◽  
2015 ◽  
Vol 5 (64) ◽  
pp. 51773-51778 ◽  
Author(s):  
Jinfeng Sun ◽  
Jinqing Wang ◽  
Zhangpeng Li ◽  
Zhigang Yang ◽  
Shengrong Yang
Keyword(s):  
Energy Storage ◽  
Electrochemical Performance ◽  
Specific Capacitance ◽  
Rate Capability ◽  
High Specific Capacitance ◽  
Controllable Synthesis ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Bismuth Compounds

3D hierarchical bismuth (Bi)-based compounds with controllable sizes and morphologies exhibit high specific capacitance and superior rate capability.

Sign in / Sign up

Export Citation Format

Share Document