scholarly journals Accurate measurement of specific tensile strength of carbon nanotube fibers with hierarchical structures by vibroscopic method

RSC Advances ◽  
2017 ◽  
Vol 7 (14) ◽  
pp. 8575-8580 ◽  
Author(s):  
Junbeom Park ◽  
Sung-Hyun Lee ◽  
Jaegeun Lee ◽  
Dong-Myeong Lee ◽  
Hayoung Yu ◽  
...  

Since carbon nanotube (CNT) fibers have a hierarchical structure, the specific strength of CNT fibers can be estimated to be much higher than its real value when the linear density of the fiber is measured using the vibroscopic method.

Author(s):  
Taehoon Kim ◽  
Jongseon Shin ◽  
Kyunbae Lee ◽  
Yeonsu Jung ◽  
Sang Bok Lee ◽  
...  

Carbon ◽  
2018 ◽  
Vol 136 ◽  
pp. 409-416 ◽  
Author(s):  
Hyunjung Cho ◽  
Haemin Lee ◽  
Eugene Oh ◽  
Sung-Hyun Lee ◽  
Junbeom Park ◽  
...  

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2170 ◽  
Author(s):  
Hyunjung Cho ◽  
Jinwoo Lee ◽  
Haemin Lee ◽  
Sung-Hyun Lee ◽  
Junbeom Park ◽  
...  

To increase the strength of carbon nanotube (CNT) fibers (CNTFs), the mean size of voids between bundles of CNTs was reduced by wet-pressing, and the CNTs were cross-linked. Separate and simultaneous physical (roller pressing) and chemical methods (cross-linking) were tested to confirm each method’s effects on the CNTF strength. By reducing the fraction of pores, roller pressing decreased the cross-sectional area from 160 μm2 to 66 μm2 and increased the average load-at-break from 2.83 ± 0.25 cN to 4.41 ± 0.16 cN. Simultaneous injection of crosslinker and roller pressing augmented the cross-linking effect by increasing the infiltration of the crosslinker solution into the CNTF, so the specific strength increased from 0.40 ± 0.05 N/tex to 0.67 ± 0.04 N/tex. To increase the strength by cross-linking, it was necessary that the size of the pores inside the CNTF were reduced, and the infiltration of the solution was increased. These results suggest that combined physical and chemical treatment is effective to increase the strength of CNTFs.


2012 ◽  
Vol 101 (13) ◽  
pp. 131905 ◽  
Author(s):  
Gengzhi Sun ◽  
John H. L. Pang ◽  
Jinyuan Zhou ◽  
Yani Zhang ◽  
Zhaoyao Zhan ◽  
...  

2014 ◽  
Vol 971-973 ◽  
pp. 157-160 ◽  
Author(s):  
A Ying Zhang

Carbon nanotube is one of the strongest materials in nature. Carbon nanotubes (CNTs) are the strongest and stiffest materials yet discovered in terms of tensile strength and elastic modulus respectively. This strength results from the covalent sp2bonds formed between the individual carbon atoms. A multi-walled carbon nanotube was tested to have a tensile strength of 63 gigapascals (GPa). Further studies revealed that individual CNT shells have strengths of up to ~100 GPa, which is in agreement with quantum/atomistic models. Since carbon nanotubes have a low density for a solid of 1.3 to 1.4 g/cm3, its specific strength of up to 48,000 kN·m·kg-1is the best of known materials, compared to high-carbon steel’s 154 kN·m·kg-1.


Nanoscale ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 4585-4590 ◽  
Author(s):  
Chao Zhang ◽  
Yanhui Song ◽  
Huichao Zhang ◽  
Bo Lv ◽  
Jian Qiao ◽  
...  

Mechanical properties of tensile strength and Young's modulus of CNT fibers were obtained at temperatures from −196 °C to 2400 °C.


RSC Advances ◽  
2016 ◽  
Vol 6 (99) ◽  
pp. 97012-97017 ◽  
Author(s):  
Gu Hou ◽  
Gang Wang ◽  
Ya Deng ◽  
Jian Zhang ◽  
Jean Pierre Nshimiyimana ◽  
...  

A SWNTs cylindrical fiber is fabricated with diamond wire drawing dies and the SWNT ribbon-like fiber is obtained by pressure treatment. The tensile strength and Young's modulus of ribbon-like fibers can be enhanced with a maximum factor about 55.


Author(s):  
E. Baer

The most advanced macromolecular materials are found in plants and animals, and certainly the connective tissues in mammals are amongst the most advanced macromolecular composites known to mankind. The efficient use of collagen, a fibrous protein, in the design of both soft and hard connective tissues is worthy of comment. Very crudely, in bone collagen serves as a highly efficient binder for the inorganic hydroxyappatite which stiffens the structure. The interactions between the organic fiber of collagen and the inorganic material seem to occur at the nano (scale) level of organization. Epitatic crystallization of the inorganic phase on the fibers has been reported to give a highly anisotropic, stress responsive, structure. Soft connective tissues also have sophisticated oriented hierarchical structures. The collagen fibers are “glued” together by a highly hydrated gel-like proteoglycan matrix. One of the simplest structures of this type is tendon which functions primarily in uniaxial tension as a reinforced elastomeric cable between muscle and bone.


2019 ◽  
Author(s):  
Michiru Makuuchi

Symbolic behaviours such as language, music, drawing, dance, etc. are unique to humans and are found universally in every culture on earth1. These behaviours operate in different cognitive domains, but they are commonly characterised as linear sequences of symbols2,3. One of the most prominent features of language is hierarchical structure4, which is also found in music5,6 and mathematics7. Current research attempts to address whether hierarchical structure exists in drawing. When we draw complex objects, such as a face, we draw part by part in a hierarchical manner guided by visual semantic knowledge8. More specifically, we predicted how hierarchical structure emerges in drawing as follows. Although the drawing order of the constituent parts composing the target object is different amongst individuals, some parts will be drawn in succession consistently, thereby forming chunks. These chunks of parts would then be further integrated with other chunks into superordinate chunks, while showing differential affinity amongst chunks. The integration of chunks to an even higher chunk level repeats until finally reaching the full object. We analysed the order of drawing strokes of twenty-two complex objects by twenty-five young healthy adult participants with a cluster analysis9 and demonstrated reasonable hierarchical structures. The results suggest that drawing involves a linear production of symbols with a hierarchical structure. From an evolutionary point of view, we argue that ancient engravings and paintings manifest Homo sapiens’ capability for hierarchical symbolic cognition.


Alloy Digest ◽  
1978 ◽  
Vol 27 (5) ◽  

Abstract CORONA 5 is a titanium alloy developed for applications in fracture-controlled aircraft components. Plane strain fracture toughnesses of 110,000 to 150,000 psi sq.rt. in. (120 to 165 MPa sq.rt. m) have been produced in this alloy at 135,00 psi (930 MPa) tensile strength through a variety of different process histories. The specific strength (strength/density ratio) is superior to that of the Ti-6A1-4V alloy. Resistance to fatigue crack propagation and resistance to chloride-stress-corrosion cracking are comparable to those of Ti-6A1-4V. This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-70. Producer or source: Crucible Steel Company of America, Titanium Division.


Sign in / Sign up

Export Citation Format

Share Document