Adsorption of anti-inflammatory nimesulide by graphene materials: a combined theoretical and experimental study

2017 ◽  
Vol 19 (33) ◽  
pp. 22099-22110 ◽  
Author(s):  
I. M. Jauris ◽  
C. F. Matos ◽  
A. J. G. Zarbin ◽  
C. S. Umpierres ◽  
C. Saucier ◽  
...  

Interactions of anti-inflammatory nimesulide with different graphene material species were explored employing both ab initio calculations and a batch adsorption process.

Author(s):  
Joshua O. Ighalo ◽  
Lois T. Arowoyele ◽  
Samuel Ogunniyi ◽  
Comfort A. Adeyanju ◽  
Folasade M. Oladipo-Emmanuel ◽  
...  

Background: The presence of pollutants in polluted water is not singularized hence pollutant species are constantly in competition for active sites during the adsorption process. A key advantage of competitive adsorption studies is that it informs on the adsorbent performance in real water treatment applications. Objective: This study aims to investigate the competitive adsorption of Pb(II), Cu(II), Fe(II) and Zn(II) using elephant grass (Pennisetum purpureum) biochar and hybrid biochar from LDPE. Method: The produced biochar was characterised by Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FTIR). The effect of adsorption parameters, equilibrium isotherm modelling and parametric studies were conducted based on data from the batch adsorption experiments. Results: For both adsorbents, the removal efficiency was >99% over the domain of the entire investigation for dosage and contact time suggesting that they are very efficient for removing multiple heavy metals from aqueous media. It was observed that removal efficiency was optimal at 2 g/l dosage and contact time of 20 minutes for both adsorbent types. The Elovich isotherm and the pseudo-second order kinetic models were best-fit for the competitive adsorption process. Conclusion: The study was able to successfully reveal that biomass biochar from elephant grass and hybrid biochar from LDPE can be used as effective adsorbent material for the removal of heavy metals from aqueous media. This study bears a positive implication for environmental protection and solid waste management.


2019 ◽  
Vol 32 (1) ◽  
pp. 73-78
Author(s):  
P. Janaki ◽  
R. Sudha ◽  
T.S. Sribharathi ◽  
P. Anitha ◽  
K. Poornima ◽  
...  

The adsorption performance of sulphuric acid treated low cost adsorbent synthesized by using Citrus limettioides peel as an effective raw material for the removal of cadmium(II) from water. The batch adsorption method was carried out to optimize some parameters like contact time, pH and adsorbent dose. The nonlinear isotherm equations were used to calculate the different isotherm constant of five isotherm models namely Freundlich, Langmuir, Dubinin-Radushkevich, Redlich-Peterson and Sips. The Langmuir monolayer adsorption capacity of chemically modified Citrus limettioides peel was found to be 287.60 mg g-1. The negative values of ΔGº and ΔHº showed that the adsorption process is spontaneous and exothermic.


2002 ◽  
Vol 91 (3) ◽  
pp. 363-368 ◽  
Author(s):  
V. Van Speybroeck ◽  
M. Waroquier ◽  
Y. Martelé ◽  
E. Schacht

2017 ◽  
Vol 18 (11) ◽  
pp. 2248 ◽  
Author(s):  
Maíra Souza Lima ◽  
Mariana Oliveira Bitencourt ◽  
Allanny Furtado ◽  
Manoela Torres-Rêgo ◽  
Emerson Siqueira ◽  
...  

2020 ◽  
Vol 1 (2) ◽  
pp. 54-62
Author(s):  
Naser Al Amery ◽  
Hussein Rasool Abid ◽  
Shaobin Wang ◽  
Shaomin Liu

In this study, two improved versions of UiO-66 were successfully synthesised. Modified UiO-66 and UiO-66-Ce were characterised to confirm the integrity of the structure, the stability of functional groups on the surface and the thermal stability. Activated samples were used for removal harmful anionic dye (methyl orange) (MO) from wastewater. Batch adsorption process was relied to investigate the competition between those MOFs for removing MO from aqueous solution. Based on the results, at a higher initial concentration, the maximum MO uptake was achieved by UiO-66-Ce which was better than modified-UiO-66. They adsorbed 71.5 and 62.5 mg g-1 respectively. Langmuir and Freundlich isotherms were employed to simulate the experimental data. In addition, Pseudo first order and Pseudo second order equations were used to describe the dynamic behaviour of MO through the adsorption process. The high adsorption capacities on these adsorbents can make them promised adsorbents in industrial areas.


Author(s):  
Md. Shahin Azad ◽  
Syaza Azhari ◽  
Mohd Sukri Hassan

The utilization of biopolymer derived from Moringa oleifera bark using ZnCl2 and H2SO4 as activating agents for eliminating Methylene blue, Escherichia coli and Pseudomonas aeruginosa from producing wastewater. In this study, Methylene blue and both bacteria were effectively adsorbed by activated carbon with lowest dosage. The activated carbon was prepared from natural-by product of Moringa oleifera bark by pyrolysis in a furnace at 700°C for 1 h. The characteristics of activated carbon have been determined using Scanning Electron Microscopy (SEM), Brunauer-Emmett-Teller (BET), pHzpc (zero point charge), and FTIR spectroscopy. The obtained result were closely fitted with Freundlich isotherm model and adsorption kinetics follow the pseudo-second order model with the highest value of correlation coefficient (R2~1). Adsorption quantity was dose dependent and bacteria were maximum adsorbed using 10 mg of activated carbon as well as 25mg for methylene blue. The maximum adsorption capacity showed within 1 hour. The bacterial load was reduced by 98% for E. coli, 96% for P. aeruginosa as well as methylene blue reduced 94.2% from aqueous solution using batch adsorption methods. Adsorption process controlled by film diffusion mechanism. These result proposed that the activated carbon of Moringa oleifera can be used as a good adsorbent for the removal of Methylene blue, E. coli and P. aeruginosa.


2011 ◽  
Vol 59 (9) ◽  
pp. 3748-3757 ◽  
Author(s):  
Yang Zhong ◽  
Hong Zhu ◽  
Leon L. Shaw ◽  
R. Ramprasad

Sign in / Sign up

Export Citation Format

Share Document