scholarly journals High-throughput in-focus differential interference contrast imaging of three-dimensional orientations of single gold nanorods coated with a mesoporous silica shell

RSC Advances ◽  
2020 ◽  
Vol 10 (50) ◽  
pp. 29868-29872
Author(s):  
Geun Wan Kim ◽  
Seokyoung Yoon ◽  
Jung Heon Lee ◽  
Ji Won Ha

Spherical AuNRs@mSiO2 have randomly oriented AuNR cores in 3D space, which could be resolved on the same focal plane by interference-based DIC microscopy.

2021 ◽  
Vol 7 (6) ◽  
pp. eabe3902
Author(s):  
Martin Rieu ◽  
Thibault Vieille ◽  
Gaël Radou ◽  
Raphaël Jeanneret ◽  
Nadia Ruiz-Gutierrez ◽  
...  

While crucial for force spectroscopists and microbiologists, three-dimensional (3D) particle tracking suffers from either poor precision, complex calibration, or the need of expensive hardware, preventing its massive adoption. We introduce a new technique, based on a simple piece of cardboard inserted in the objective focal plane, that enables simple 3D tracking of dilute microparticles while offering subnanometer frame-to-frame precision in all directions. Its linearity alleviates calibration procedures, while the interferometric pattern enhances precision. We illustrate its utility in single-molecule force spectroscopy and single-algae motility analysis. As with any technique based on back focal plane engineering, it may be directly embedded in a commercial objective, providing a means to convert any preexisting optical setup in a 3D tracking system. Thanks to its precision, its simplicity, and its versatility, we envision that the technique has the potential to enhance the spreading of high-precision and high-throughput 3D tracking.


Small ◽  
2015 ◽  
Vol 11 (19) ◽  
pp. 2323-2332 ◽  
Author(s):  
Ji Liu ◽  
Christophe Detrembleur ◽  
Marie-Claire De Pauw-Gillet ◽  
Stéphane Mornet ◽  
Christine Jérôme ◽  
...  

2000 ◽  
Vol 39 (02) ◽  
pp. 105-109 ◽  
Author(s):  
F. Lanni ◽  
T. Kanade ◽  
F. Kagalwala

Abstract:Differential Interference Contrast (DIC) microscopy is a powerful visualization tool used to study live biological cells. Its use, however, has been limited to qualitative observations. The inherent non-linear relation between the object properties and the image intensity makes quantitative analysis difficult. As a first step towards measuring optical properties of objects from DIC images, we develop a model for the image formation process using methods consistent with energy conservation laws. We verify our model by comparing real image data of manufactured specimens to simulated images of virtual objects. As the next step, we plan to use this model to reconstruct the three-dimensional properties of unknown specimens.


2013 ◽  
Vol 19 (S4) ◽  
pp. 17-18
Author(s):  
E. Azevedo ◽  
M.F. Caeiro ◽  
M. Barata

Marine fungi occur either in Open Ocean or in the intertidal zone of sandy beaches, salt marshes and mangroves, where their hosts and substrates are found. The development of morphological adaptations like appendages and sheaths of the spores are vital to the settlement and attachment to substrate surfaces, floatation and dispersion on seawater. The morphological features of these appendages and sheaths of spores also have an important role in the identification of marine fungi. Differential interference contrast (DIC) microscopy is an essential tool for the observation of these mucilaginous structures in marine fungi spores and was therefore applied to marine mycota from surveys along the Portuguese coast.Since 1991 Portuguese marine fungi have been studied and characterized based on morphological identifications. The studied environments included salt marshes, sandy beaches and marinas. On these environments different substrates were collected such as plants and baits of Spartina maritima, different categories of drift substrates and Fagus sylvatica and Pinus pinaster baits. These substrates, which had been exposed to different conditions of permanent and temporary submersion, were subjected to an initial examination under the stereoscope microscope in order to detect fruit bodies and spores of marine fungi. These structures were then observed in order to achieve the taxonomic identifications of these fungi, based on dichotomous keys for marine fungi.To observe and characterize the wide variety of appendages and mucilaginous sheaths of the ascospores, basidiospores and conidia often invisible in the bright field of the light microscope, the use of DIC microscopy was implemented, because three-dimensional images are produced, highlighting them. The identified fungi were microphotographed with a Leica Wild MPS 52 with Fujichrome RTP- 135, 64T Tungsten.The studies carried out with substrates subjected to conditions of permanent submersion highlighted the dominance of Ascomycota with unitunicate asci. The unitunicate asci are thin - walled, persistent or early deliquescing, favoring ascospores release on marine environmental conditions (fig 1a, 1b and 1c). On the other hand, Ascomycota with bitunicate asci, were mainly detected on temporary submersion conditions. These fungi presented asci with active spore discharge and mucilaginous sheaths that contributed to substrate attachment (fig. 2a and 2b). Ascospores and conidia presented morphological diversity on their appendages, which has particular importance on their success in marine environment (figs. 3, 4, 5, and 6).Marine Mycologists are in agreement that the best technique to observe the appendages and sheaths of spores, often invisible in the bright-field microscope is the use of differential interference or phase contrast microscopy. DIC microscopy was then applied to the observation of Portuguese marine fungi enabling to thoroughly characterize the structures essential to their morphological identifications.


2015 ◽  
Vol 2015 (13) ◽  
pp. 2277-2284 ◽  
Author(s):  
Ting Zhang ◽  
Zeyang Ding ◽  
Huiming Lin ◽  
Liru Cui ◽  
Chunyu Yang ◽  
...  

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1338
Author(s):  
Adrián Fernández-Lodeiro ◽  
Jamila Djafari ◽  
Javier Fernández-Lodeiro ◽  
Maria Paula Duarte ◽  
Elisabete Muchagato Mauricio ◽  
...  

In this work, the successful preparation and characterization of gold nanorods (AuNRs) coated with a mesoporous silica shell (AuNRs@Simes) was achieved. Conjugation with methylene blue (MB) as a model drug using ultrasound-stimulated loading has been explored for further application in light-mediated antibacterial studies. Lyophilization of this conjugated nanosystem was analyzed using trehalose (TRH) as a cryogenic protector. The obtained stable dry formulation shows potent antimicrobial activity against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria after a simple post-treatment irradiation method with a red laser during a short time period.


RSC Advances ◽  
2021 ◽  
Vol 11 (61) ◽  
pp. 38632-38637
Author(s):  
Geun Wan Kim ◽  
In-Seob Han ◽  
Ji Won Ha

We presented polarization-dependent, periodic DIC images and intensities of single AuNRs@mSiO2 at their LSPR wavelength and investigated their use as multifunctional orientation probes in biological environments.


2015 ◽  
Vol 9 (1) ◽  
pp. 170-174 ◽  
Author(s):  
Xiaoling Zhang ◽  
Qingduan Meng ◽  
Liwen Zhang

The square checkerboard buckling deformation appearing in indium antimonide infrared focal-plane arrays (InSb IRFPAs) subjected to the thermal shock tests, results in the fracturing of the InSb chip, which restricts its final yield. In light of the proposed three-dimensional modeling, we proposed the method of thinning a silicon readout integrated circuit (ROIC) to level the uneven top surface of InSb IRFPAs. Simulation results show that when the silicon ROIC is thinned from 300 μm to 20 μm, the maximal displacement in the InSb IRFPAs linearly decreases from 7.115 μm to 0.670 μm in the upward direction, and also decreases linearly from 14.013 μm to 1.612 μm in the downward direction. Once the thickness of the silicon ROIC is less than 50 μm, the square checkerboard buckling deformation distribution presenting in the thicker InSb IRFPAs disappears, and the top surface of the InSb IRFPAs becomes flat. All these findings imply that the thickness of the silicon ROIC determines the degree of deformation in the InSb IRFPAs under a thermal shock test, that the method of thinning a silicon ROIC is suitable for decreasing the fracture probability of the InSb chip, and that this approach improves the reliability of InSb IRFPAs.


Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 444
Author(s):  
Guoning Si ◽  
Liangying Sun ◽  
Zhuo Zhang ◽  
Xuping Zhang

This paper presents the design, fabrication, and testing of a novel three-dimensional (3D) three-fingered electrothermal microgripper with multiple degrees of freedom (multi DOFs). Each finger of the microgripper is composed of a V-shaped electrothermal actuator providing one DOF, and a 3D U-shaped electrothermal actuator offering two DOFs in the plane perpendicular to the movement of the V-shaped actuator. As a result, each finger possesses 3D mobilities with three DOFs. Each beam of the actuators is heated externally with the polyimide film. The durability of the polyimide film is tested under different voltages. The static and dynamic properties of the finger are also tested. Experiments show that not only can the microgripper pick and place microobjects, such as micro balls and even highly deformable zebrafish embryos, but can also rotate them in 3D space.


Sign in / Sign up

Export Citation Format

Share Document