scholarly journals Simulations of Depth-Averaged Streamwise Velocity of Meandering Compound Channel using TELEMAC Modules

2018 ◽  
Vol 65 ◽  
pp. 07001
Author(s):  
Abdul Haslim Abdul Shukor Lim ◽  
Zulhilmi Ismai ◽  
Mohamad Hidayat Jama ◽  
Md. Ridzuan Makhtar
Keyword(s):  
Stokes Equations ◽  
Computing Time ◽  
Streamwise Velocity ◽  
Main Channel ◽  
Navier Stokes ◽  
Relative Depth ◽  
Compound Channel ◽  
Navier Stokes Equations ◽  
Numerical Tools ◽  
Good Agreement

Capabilities of numerical tools to simulate fluid problems significantly depend on its methods to solve for the Navier-Stokes equations. Different dimensional computing tools using the same horizontal meshes were used to simulate flow conditions inside non- and vegetation meandering compound channel. Both tools give good agreement for simulations of depth-averaged streamwise velocity inside the main channel, but its capabilities vary significantly for simulations on floodplains. Lower relative depth recorded a higher percentage of errors than flow with higher relative depth. Vegetation along the main channel increased the flows complexity especially in the area near the vegetation thus reducing the simulation capabilities of the computing tools. Simulations work by TELEMAC-3D significantly better in the areas with highly dimensional and turbulence conditions. TELEMAC-2D is still useful because of its simplicity and lower computing time and resources required.

Simulation of Unsteady Flow Around a Cylinder

2015 ◽  
Vol 3 (2) ◽  
pp. 28-49
Author(s):  
Ridha Alwan Ahmed
Keyword(s):  
Stokes Equations ◽  
Lift Coefficient ◽  
Reynolds Numbers ◽  
Mean Value ◽  
Navier Stokes ◽  
Cylinder Surface ◽  
Navier Stokes Equations ◽  
Flow Around A Cylinder ◽  
Numerical Grid ◽  
Good Agreement

       In this paper, the phenomena of vortex shedding from the circular cylinder surface has been studied at several Reynolds Numbers (40≤Re≤ 300).The 2D, unsteady, incompressible, Laminar flow, continuity and Navier Stokes equations have been solved numerically by using CFD Package FLUENT. In this package PISO algorithm is used in the pressure-velocity coupling.        The numerical grid is generated by using Gambit program. The velocity and pressure fields are obtained upstream and downstream of the cylinder at each time and it is also calculated the mean value of drag coefficient and value of lift coefficient .The results showed that the flow is strongly unsteady and unsymmetrical at Re>60. The results have been compared with the available experiments and a good agreement has been found between them

Numerical Modeling of Evolution of Boundary Between Incompressible Gas and Liquid in Two-Dimensional Region

2006 ◽  
Vol 4 ◽  
pp. 224-236
Author(s):  
A.S. Topolnikov
Keyword(s):  
Numerical Modeling ◽  
Interphase Boundary ◽  
Incompressible Liquid ◽  
Stokes Equations ◽  
Numerical Code ◽  
Navier Stokes ◽  
Two Phase ◽  
Navier Stokes Equations ◽  
Incompressible Media ◽  
Good Agreement

The paper is devoted to numerical modeling of Navier–Stokes equations for incompressible media in the case, when there exist gas and liquid inside the rectangular calculation region, which are separated by interphase boundary. The set of equations for incompressible liquid accounting for viscous, gravitational and surface (capillary) forces is solved by finite-difference scheme on the spaced grid, for description of interphase boundary the ideology of Level Set Method is used. By developed numerical code the set of hydrodynamic problems is solved, which describe the motion of two-phase incompressible media with interphase boundary. As a result of numerical simulation the solutions are obtained, which are in good agreement with existing analytical and experimental solutions.

On the Flow Fields of Inertial Impactors

1974 ◽  
Vol 96 (4) ◽  
pp. 394-400 ◽  
Author(s):  
V. A. Marple ◽  
B. Y. H. Liu ◽  
K. T. Whitby
Keyword(s):  
Flow Field ◽  
Stokes Equations ◽  
Relaxation Method ◽  
Water Model ◽  
Navier Stokes ◽  
Visualization Technique ◽  
Navier Stokes Equations ◽  
Theoretical Results ◽  
Plate Distance ◽  
Good Agreement

The flow field in an inertial impactor was studied experimentally with a water model by means of a flow visualization technique. The influence of such parameters as Reynolds number and jet-to-plate distance on the flow field was determined. The Navier-Stokes equations describing the laminar flow field in the impactor were solved numerically by means of a finite difference relaxation method. The theoretical results were found to be in good agreement with the empirical observations made with the water model.

Shape Optimization of Forward-Curved-Blade Centrifugal Fan with Navier-Stokes Analysis

2004 ◽  
Vol 126 (5) ◽  
pp. 735-742 ◽  
Author(s):  
Kwang-Yong Kim ◽  
Seoung-Jin Seo
Keyword(s):  
Response Surface ◽  
Stokes Equations ◽  
Computing Time ◽  
Relative Size ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Centrifugal Fan ◽  
Navier Stokes Equations ◽  
Design Variables ◽  
Curved Blade

In this paper, the response surface method using a three-dimensional Navier-Stokes analysis to optimize the shape of a forward-curved-blade centrifugal fan is described. For the numerical analysis, Reynolds-averaged Navier-Stokes equations with the standard k-ε turbulence model are discretized with finite volume approximations. The SIMPLEC algorithm is used as a velocity–pressure correction procedure. In order to reduce the huge computing time due to a large number of blades in forward-curved-blade centrifugal fan, the flow inside of the fan is regarded as steady flow by introducing the impeller force models. Four design variables, i.e., location of cutoff, radius of cutoff, expansion angle of scroll, and width of impeller, were selected to optimize the shapes of scroll and blades. Data points for response evaluations were selected by D-optimal design, and a linear programming method was used for the optimization on the response surface. As a main result of the optimization, the efficiency was successfully improved. Effects of the relative size of the inactive zone at the exit of impeller and momentum fluxes of the flow in scroll on efficiency were further discussed. It was found that the optimization process provides a reliable design of this kind of fan with reasonable computing time.

Numerical Prediction of Turbulent Wakes Behind a Square Cylinder

1998 ◽  
Vol 14 (1) ◽  
pp. 23-29
Author(s):  
Robert R. Hwang ◽  
Sheng-Yuh Jaw
Keyword(s):  
Stokes Equations ◽  
Numerical Study ◽  
Navier Stokes ◽  
Wall Region ◽  
Square Cylinder ◽  
Mean Velocity ◽  
Navier Stokes Equations ◽  
Turbulent Vortex Shedding ◽  
Model Equations ◽  
Good Agreement

ABSTRACTThis paper presents a numerical study on turbulent vortex shedding flows past a square cylinder. The 2D unsteady periodic shedding motion was resolved in the calculation and the superimposed turbulent fluctuations were simulated with a second-order Reynolds-stress closure model. The calculations were carried out by solving numerically the fully elliptic ensemble-averaged Navier-Stokes equations coupled with the turbulence model equations together with the two-layer approach in the treatment of the near-wall region. The performance of the computations was evaluated by comparing the numerical results with data from available experiments. Results indicate that the present study gives good agreement in the shedding frequency and mean drag as well as in some phase profiles of the mean velocity.

Numerical Modelling of Circulation in Lake Sperillen, Norway

2000 ◽  
Vol 31 (1) ◽  
pp. 57-72 ◽  
Author(s):  
N. R. B. Olsen ◽  
D. K. Lysne
Keyword(s):  
Numerical Model ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Field Measurements ◽  
Navier Stokes ◽  
Water Current ◽  
Simple Method ◽  
Vertical Temperature Profile ◽  
Navier Stokes Equations ◽  
Good Agreement

A three-dimensional numerical model was used to model water circulation and spatial variation of temperature in Lake Sperillen in Norway. A winter situation was simulated, with thermal stratification and ice cover. The numerical model solved the Navier-Stokes equations on a 3D unstructured non-orthogonal grid with hexahedral cells. The SIMPLE method was used for the pressure coupling and the k-ε model was used to model turbulence, with a modification for density stratification due to the vertical temperature profile. The results were compared with field measurements of the temperature in the lake, indicating the location of the water current. Reasonably good agreement was found.

Numerical Investigation of Unsteady Incompressible 3D Turbulent Flow and Torque Transmission in Fluid Couplings

1994 ◽  
Author(s):  
L. Bal ◽  
A. Kost ◽  
M. Fiebig ◽  
N. K. Mitra
Keyword(s):  
Stokes Equations ◽  
Navier Stokes ◽  
Flow Structures ◽  
Optimized Design ◽  
Navier Stokes Equations ◽  
Reference Flow ◽  
Torque Transmission ◽  
Adequate Understanding ◽  
Volume Method ◽  
Good Agreement

The adequate understanding of the flow structure in fluid couplings is necessary for the optimized design of such devices. Up to now, empiricism plays an important role in design. Detailed studies of the unsteady 3D flow and torque transmission in fluid couplings were rarely carried out. In this paper the unsteady Reynolds time-averaged Navier-Stokes equations coupled with the k-ε model have been solved by a finite-volume method. The calculations were done by using boundary-fitted grids with non-staggered variable arrangement for a rotating frame of reference. Flow structures in fluid couplings were obtained. The results give insights into the physical process of torque transmission. A comparsion of the calculated torque transimission with the experimental measurements in the literature shows good agreement for low slip.

Numerical Modeling of Flow Over a Dam Spillway

2006 ◽  
Author(s):  
Iraj Saeedpanah ◽  
M. Shayanfar ◽  
E. Jabbari ◽  
Mohammad Haji Mohammadi
Keyword(s):  
Free Surface ◽  
Stokes Equations ◽  
Iterative Solution ◽  
Free Surface Flows ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Continuity Equations ◽  
Water Jets ◽  
Pressure Fields ◽  
Good Agreement

Free surface flows are frequently encountered in hydraulic engineering problems including water jets, weirs and around gates. An iterative solution to the incompressible two-dimensional vertical steady Navier-Stokes equations, comprising momentum and continuity equations, is used to solve for the priori unknown free surface, the velocity and the pressure fields. The entire water body is covered by a unstructured finite element grid which is locally refined. The dynamic boundary condition is imposed for the free surface where the pressure vanishes. This procedure is done continuously until the normal velocities components vanish. To overcome numerical errors and oscillations encountering in convection terms, the SUPG (streamline upwinding Petrov-Galerkin) method is applied. The solution method is tested for different discharges onto a standard spillway geometries. The results shows good agreement with available experimental data.

scholarly journals Characteristics of a CW HF chemical laser calculated from a simplified two-dimensional model

1986 ◽  
Vol 4 (2) ◽  
pp. 167-181 ◽  
Author(s):  
Zhou Xuehua ◽  
Chen Liyin ◽  
Chen Haitao
Keyword(s):  
Stokes Equations ◽  
Computing Time ◽  
Navier Stokes ◽  
Small Signal Gain ◽  
Small Signal ◽  
Two Dimensional ◽  
Gas Temperature ◽  
Navier Stokes Equations ◽  
Chemical Laser ◽  
Signal Gain

A two-dimensional simplified model of an HF chemical laser is introduced. Using an implicit finite difference scheme, the solution of two adjacent parallel streams with diffusion mixing and chemical reaction is generated. A contour of the mixing and reaction boundary is obtained without presupposition. The distribution of the HF(u) concentrations, gas temperature and the optical small signal gain (αu, J) on the flowing plane (X, Y) are presented. Compared with the solution solved directly from a set of Navier–Stokes equations, the results of these two methods agree with each other qualitatively. The influences of the different velocity, temperature (T0) and composition of the two streams on the small signal gain after the nozzle exit are investigated. It is interesting that for larger J with a fixed u, the peaks of αu, J—T0 profiles move towards higher T0. The computing method is simple and only a short computing time is needed.

Some numerical experiments on developing laminar flow in circular-sectioned bends

1985 ◽  
Vol 154 ◽  
pp. 357-375 ◽  
Author(s):  
J. A. C. Humphrey ◽  
H. Iacovides ◽  
B. E. Launder
Keyword(s):  
Shear Stress ◽  
Laminar Flow ◽  
Numerical Solutions ◽  
Stokes Equations ◽  
Inviscid Flow ◽  
Streamwise Velocity ◽  
Navier Stokes ◽  
Dean Number ◽  
Navier Stokes Equations ◽  
Numerical Predictions

The paper reports numerical solutions to a semi-elliptic truncation of the Navier–Stokes equations for the case of developing laminar flow in circular-sectioned bends over a range of Dean numbers. The ratios of bend radius to pipe radius are 7:1 and 20:1, corresponding with the configurations examined experimentally by Talbot and his co-workers in recent years. The semi-elliptic treatment facilitates a much finer grid than has been possible in earlier studies. Numerical accuracy has been further improved by assuming radial equilibrium over a thin sublayer immediately adjacent to the wall and by re-formulating the boundary conditions at the pipe centre.Streamwise velocity profiles at Dean numbers of 183 and 565 are in excellent agreement with laser-Doppler measurements by Agrawal, Talbot & Gong (1978). Good, albeit less complete, accord is found with the secondary velocities, though the differences that exist may be mainly due to the difficulty of making these measurements. The paper provides new information on the behaviour of the streamwise shear stress around the inner line of symmetry. Upstream of the point of minimum shear stress, our numerical predictions display a progressive shift towards the result of Stewartson, Cebici & Chang (1980) as the Dean number is successively raised. Downstream of the minimum, however, in contrast with the monotonic approach to an asymptotic level reported by Stewartson, the numerical solutions display a damped oscillatory behaviour reminiscent of those from Hawthorne's (1951) inviscid-flow calculations. The amplitude of the oscillation grows as the Dean number is raised.

Sign in / Sign up

Export Citation Format

Share Document