scholarly journals An Analytical Continuous Upper Bound Limit Analysis of Pore Water Effect on the Tail Stability of Underwater Shield Tunnels during Construction

2020 ◽  
Vol 143 ◽  
pp. 01015
Author(s):  
Wenjie Song ◽  
Yanyong Xiang
Keyword(s):  
Pore Water ◽  
Upper Bound ◽  
Limit Analysis ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Ground Surface ◽  
Support Pressure ◽  
Tunnel Support ◽  
Transverse Stability ◽  
Upper Bound Limit Analysis

An analytical continuous upper bound limit analysis is developed to analyse the effects of seepage on the transverse stability of underwater shield tunnels. The approach is based on an analytical continuous upper bound limit analysis method for cohesive-frictional soils. It employs the complex variables solution of the displacement field due to tunnel deformation and movement, and the analytical solution of the pore water pressure field for steady state seepage due to pore water influx at the tunnel perimeter. The most critical slip line position and the minimum required tunnel support pressure are determined by using a particle swarm optimization scheme for various generic situations. The method is verified via finite element simulation and comparison with the solution from using rigid block upper bound limit analysis. The parametric analysis revealed among other things that both the infimum of the necessary tunnel support pressure and the most critical plastic zone increase when the hydraulic head at the ground surface increases, but decrease when the tunnel influx increases due to the fact that pore water pressure at the tunnel perimeter decreases with the tunnel influx.

scholarly journals Three-Dimensional Upper Bound Limit Analysis on the Collapse of Shallow Soil Tunnels considering Roof Stratification and Pore Water Pressure

2019 ◽  
Vol 2019 ◽  
pp. 1-15 ◽  
Author(s):  
Hong-Tao Wang ◽  
Ping Liu ◽  
Chi Liu ◽  
Xin Zhang ◽  
Yong Yang ◽  
...  
Keyword(s):  
Pore Water ◽  
Upper Bound ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Nonlinear Coefficient ◽  
Soil Layer ◽  
Three Dimensional ◽  
Support Pressure ◽  
Flow Rule ◽  
Soil Cohesion

Based on the plastic upper bound theorem, a three-dimensional kinematically admissible velocity field is constructed for the collapse of the soil masses above a shallow tunnel. In this field, this paper considers the influences of the roof stratification, pore water pressure, ground overload, and support pressure. This study deduced the upper bound solutions of the weight of the collapsed soil masses and the corresponding collapse surfaces by utilizing the nonlinear failure criterion, associated flow rule, and variation principle. Furthermore, we verified the validity of the proposed method in this paper by comparing this research with the existing work and numerical simulation results. This study obtains the influence laws of varying parameters on the area and weight of the collapsed soil masses. The results reveal that the area and weight of the collapsed soil masses increase with increasing support pressure and soil cohesion, but decrease with increasing thickness of the upper soil layer, nonlinear coefficient, pore water pressure, and ground overload. Among them, the roof stratification, pore water pressure, soil cohesion, and nonlinear coefficient have a significant influence on tunnel collapse, which should be given special consideration in engineering design.

Downslope movements at shallow depths related to cyclic pore-pressure changes

1993 ◽  
Vol 30 (3) ◽  
pp. 464-475 ◽  
Author(s):  
K.D. Eigenbrod
Keyword(s):  
Pore Water ◽  
Slip Surface ◽  
Pore Water Pressure ◽  
Limit Equilibrium ◽  
Water Pressure ◽  
Ground Surface ◽  
Soil Mass ◽  
Passive Resistance ◽  
Pressure Changes ◽  
Timber Piles

Slow, shallow ground movements in a slope near Yellowknife caused excessive tilting of timber piles that supported an engineering structure. To avoid damage to the structure, the pile foundations had to be replaced by rigid concrete piers that were designed to resist the forces of the moving soil mass. Downhill movements were rather slow and, during an initial inspection, were indicated only by soil that was pushed up against a series of piles on their uphill sides, while gaps had formed on their downhill sides. No open cracks or bulging was observed on the slope. A stability analysis indicated that the slope was not in a state of limit equilibrium. To obtain a better understanding of the creep movements in the slope and their effect on the rigid concrete piers, extensive instrumentation was carried out after the construction of the piers. This included slope indicators, piezometers, thermistors, and total-pressure cells against one of the concrete piers. In addition, a triaxial testing program was undertaken in which the effect of cyclic pore-water pressure changes on the long-term deformations of the shallow clay layer was investigated. From the data collected in the field and laboratory, it could be concluded that (i) tilting of the original timber piles was caused by downslope movements related to cyclic pore-water increases; (ii) the lateral soil movements increased almost linearly with depth from 2 m below the ground surface, with no indication of a slip surface; and (iii) the pressures exerted by the moving soil mass against the rigid concrete piers within the soil mass were equal to the passive resistance activated within the moving soil mass. Key words : soil creep, slope movements, soil pressures, pore-water pressures, freezing pressures, permafrost, cyclic loading.

scholarly journals Numerical Evaluation of The Nonlinear Behavior of Soil-Pile Interaction Under The Effect of Coupled Static-Dynamic Loads

2021 ◽  
Author(s):  
Duaa Al-Jeznawi ◽  
ISMACAHYADI Mohamed Jais ◽  
Bushra S. Albusoda
Keyword(s):  
Pore Water ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Three Dimensional ◽  
Ground Surface ◽  
Frictional Resistance ◽  
Saturated Soil ◽  
Shaking Table ◽  
Physical Models ◽  
Soil Layers

Abstract Liquefaction of saturated soil layers is one of the most common causes of structural failure during earthquakes. Liquefaction occurs as a result of increasing pore water pressure, whereby the rise in water pressure occurs due to unexpected change in stress state under short-term loading, i.e., shaking during an earthquake. Thus, general failure occurs when the soil softens and eliminates its stiffness against the uplift pressure from the stability of the subsurface structure. In this case, the condition of soil strata is considered undrained because there is not enough time for the excess pore water pressure to dissipate when a sudden load is applied. To represent the non-linear characteristics of saturated sand under seismic motions in Kobe and Ali Algharbi earthquakes, the computational model was simulated using the UBCSAND model. The current study was carried out by adopting three-dimensional-based finite element models that were evaluated by shaking table tests of a single pile model erected in the saturated soil layers. The experimental data were utilized to estimate the liquefaction and seismicity of soil deposits. According to the results obtained from the physical models and simulations, this proposed model accurately simulates the liquefaction phenomenon and soil-pile response. However, there are some differences between the experiment and the computational analyses. Nonetheless, the results showed good agreement with the general trend in terms of deformation, acceleration, and liquefaction ratio. Moreover, the displacement of liquefied soil around the pile was captured by the directions of vectors generated by numerical analysis, which resembled a worldwide circular flow pattern. The results revealed that during the dynamic excitation, increased pore water pressure and subsequent liquefaction caused a significant reduction in pile frictional resistance. Despite this, positive frictional resistance was noticed through the loose sand layer (near the ground surface) until the soil softened completely. It is worth mentioning that the pile exhibited excessive settlement which may attribute to the considerable reduction, in the end, bearing forces which in turn mobilizing extra end resistance.

Investigation of field-installation effects of horizontal twin-jet grouting in Shanghai soft soil deposits

2013 ◽  
Vol 50 (3) ◽  
pp. 288-297 ◽  
Author(s):  
Zhi-Feng Wang ◽  
Shui-Long Shen ◽  
Chu-Eu Ho ◽  
Yong-Hyun Kim
Keyword(s):  
Pore Water ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Soft Soil ◽  
Ground Surface ◽  
Prediction Methods ◽  
Jet Grouting ◽  
Soil Deposits ◽  
Lateral Displacements ◽  
Surface Heave

This paper presents a case study of an investigation into the responses of the surrounding ground to the horizontal twin-jet grouting method (HTJGM) in soft soil deposits of Shanghai. During the field test, the variation of pore-water pressure, lateral earth pressure, lateral displacements of the subsurface soils, and ground surface heave induced by the installation of five horizontal jet-grouted columns were monitored. The monitoring results indicate that the excess pore-water pressure reached 4 to 6 times the undrained shear strength of the soils, while maximum lateral displacements and ground surface heave were up to 80 and 17 mm, respectively. The influence range due to the installation of jet-grouted columns was between 15 and 20 times the nominal column radius. The development of prediction methods for lateral displacements and ground surface heave induced by the HTJGM installation process are presented and discussed. Results from the investigation suggest that the proposed prediction methods can be used to provide reasonable estimates of ground response and influence range of horizontal jet grouting.

scholarly journals Upper Bound Solution for the Face Stability of Shield Tunnel below the Water Table

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Xilin Lu ◽  
Haoran Wang ◽  
Maosong Huang
Keyword(s):  
Upper Bound ◽  
Limit Analysis ◽  
Fe Simulation ◽  
Shield Tunnel ◽  
Support Pressure ◽  
Seepage Force ◽  
Tunnel Face ◽  
Face Stability ◽  
The Face ◽  
Upper Bound Limit Analysis

By FE simulation with Mohr-Coulomb perfect elastoplasticity model, the relationship between the support pressure and displacement of the shield tunnel face was obtained. According to the plastic strain distribution at collapse state, an appropriate failure mechanism was proposed for upper bound limit analysis, and the formula to calculate the limit support pressure was deduced. The limit support pressure was rearranged to be the summation of soil cohesionc, surcharge loadq, and soil gravityγmultiplied by their corresponding coefficientsNc,Nq, andNγ, and parametric studies were carried out on these coefficients. In order to consider the influence of seepage on the face stability, the pore water pressure distribution and the seepage force on the tunnel face were obtained by FE simulation. After adding the power of seepage force into the equation of the upper bound limit analysis, the total limit support pressure for stabilizing the tunnel face under seepage condition was obtained. The total limit support pressure was shown to increase almost linearly with the water table.

scholarly journals A Numerical Investigation of the Deformation Mechanism of a Large Metro Station Foundation Pit under the Influence of Hydromechanical Processes

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Yan Wang ◽  
Yongjun Zhang ◽  
Mingfei Li ◽  
Yi Qi ◽  
Tianhui Ma
Keyword(s):  
Pore Water ◽  
Heavy Rainfall ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Ground Surface ◽  
Horizontal Displacement ◽  
Horizontal Distance ◽  
Foundation Pit ◽  
Metro Station ◽  
Ground Conditions

Considering the unique conditions of deep and large subway foundation pit excavation affected by heavy rainfall in soil-rock composite strata, this paper employs finite element numerical simulation methods to study foundation pit instability under the influence of heavy rainfall. According to the hydraulic coupling conditions caused by rainfall, a fluid-solid coupling numerical model for a deep and large subway foundation pit in soil-rock composite strata is established in this paper. By selecting the Anshan road station of Qingdao subway line 4 as the engineering background, various parameters related to foundation pit excavation affected by heavy rainfall at different excavation depths were analyzed. The study found that after the foundation pit was excavated, the surrounding pore water pressure decreased and the pore water pressure near the ground surface increased rapidly due to rainfall. As the horizontal distance from the foundation pit increased, the pore water pressure at the same depth also increased. The excavation of the foundation pit caused uplift of the bottom of the pit. After rainfall, the uplift value decreased compared with that before rainfall. With increasing excavation depth, the decreased value of the bottom uplift decreased and then increased. The rainfall caused the horizontal displacement of the pit walls on both sides of the pit to increase. When the excavation depth was 10 m, the horizontal displacements on both sides of the pit were equivalent. When the excavation depth was 20 m, the horizontal displacement was concentrated in the first 10 m; when the excavation depths were 30 m and 40 m, the horizontal displacement was concentrated in the first 13 m. This finding shows that when the foundation pit was affected by rainfall, the sidewall collapsed at a distance of 13 meters from the ground. As the excavation depth increased, the depth of excavation instability was closer to the bottom of the pit. The research in this paper can provide a reference for the construction of deep and large foundation pits in similar composite ground conditions that are affected by rainfall.

Three-dimensional numerical investigations of groundwater responses in an unsaturated slope subjected to various rainfall patterns

2001 ◽  
Vol 38 (5) ◽  
pp. 1049-1062 ◽  
Author(s):  
C WW Ng ◽  
B Wang ◽  
Y K Tung
Keyword(s):  
Pore Water ◽  
Short Duration ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Three Dimensional ◽  
Ground Surface ◽  
Rainfall Pattern ◽  
Initial Water ◽  
Pore Water Pressures ◽  
Rainfall Patterns

Three-dimensional (3D) numerical analyses were conducted to investigate groundwater responses in an initially unsaturated cut slope at Lai Ping Road in Hong Kong subjected to rainfalls with various patterns, durations, and return periods. Initial and boundary conditions were established from field monitoring data. The computed results show that rainfall pattern has a significant influence on pore-water pressures in soil layers near the ground surface but its influence gradually diminishes with depth. Rainfall with an advanced storm pattern of 24 h duration was found to be the most critical because it results in the highest pore-water pressure in the slope. At a given depth, the influence of rainfall pattern on pore-water pressures depends on the initial groundwater conditions: the higher the initial water table, the smaller the influence of rainfall pattern on pore-water pressures. Under a given rainfall duration, the rise of pore-water pressure at the study site is significant only when the return period increases from 10 years to 100 years, but not from 100 years to 1000 years. Short-duration, intense rainfall causes larger variations in pore-water pressure at shallow depths, whereas long-duration rainfall has a greater influence on groundwater in deep soils because of the generally greater amount of rainfall. For prolonged rainfalls, the difference in pore-water pressure distribution resulting from different rainfall patterns is less significant than that from short-duration, intense rainfalls.Key words: Lai Ping Road, rainfall patterns, pore-water pressure distributions, suction, unsaturated slope.

The Effects of Seismic Pore Water Pressure on Ground Surface Motion

1994 ◽  
Vol 10 (2) ◽  
pp. 403-438 ◽  
Author(s):  
George(Bebe)T. Zorapapel ◽  
Mladen Vucetic
Keyword(s):  
Pore Water ◽  
Fourier Transforms ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Ground Surface ◽  
Surface Motion ◽  
Surface Displacements ◽  
Acceleration Time Histories ◽  
Pore Water Pressures ◽  
Time Histories

The effects of the gradual buildup of seismic pore water pressures and associated degradation of stiffness on the ground surface motion are examined for shallow saturated liquefiable deposits. Ground surface displacements and accelerations, the Fourier Transforms of the acceleration-time histories and layer gain factors are analyzed. The analysis is based on the ground surface and sub-surface accelerations and pore water pressures recorded at sites that either fully liquefied or built up considerable pore water pressures during strong earthquakes. The analysis shows that: (i) the seismic pore water pressures within the deposit and the ground surface motion are intimately related, (ii) relatively small seismic excess pore water pressures can cause a considerable lengthening of the predominant period of the ground surface motion, and (iii) these phenomena may lead to a limited maximum ground surface acceleration of approximately 0.2g, and a considerable increase of maximum ground displacements.

Sign in / Sign up

Export Citation Format

Share Document