scholarly journals Application of 3D Design Technology in the Construction of 220KV Miluoxi Substation

2021 ◽  
Vol 248 ◽  
pp. 02051
Author(s):  
Jiang Wen ◽  
Yang Jin Hu ◽  
Zhai Wei ◽  
Xu Guangbing ◽  
Xiang Xinxin ◽  
...  
Keyword(s):  
Mobile Application ◽  
Three Dimensional ◽  
Social Benefits ◽  
Construction Simulation ◽  
Scene Modeling ◽  
Economic Management ◽  
3D Design ◽  
Design Technology ◽  
Technology Application ◽  
Real Scene

In this paper, through the application of 3D design technology in the construction of 220kV Miluoxi substation, the main aspects of the application of 3D design technology in the construction are summarized, including inter discipline verification, collision inspection, real scene modeling, equipment 3D installation details, 4D construction simulation, VR technology application and mobile application solutions. This paper also summarizes the economic, management and social benefits of three-dimensional application, which can be used as a reference for the following projects.

scholarly journals Fast Industrial Product Design Method and its Application Based on 3D CAD System

2020 ◽  
Vol 18 (S3) ◽  
pp. 118-128
Author(s):  
Fei Liu
Keyword(s):  
Product Development ◽  
Product Design ◽  
Design Process ◽  
Market Competition ◽  
Three Dimensional ◽  
Manufacturing Companies ◽  
Design Environment ◽  
3D Design ◽  
Design Technology ◽  
Product Design Process

With the rapid development of science and technology and the emergence of new technologies, the speed of product upgrading has accelerated, and the life cycle has been significantly shortened, leading to increasingly fierce market competition. Through the analysis of the enterprise product development process, combined with CAD-based product rapid design technology and parametric design technology, this paper proposes a product configuration editor based on three-dimensional software with a visual interface, and combines it with the PDM system. A software system that can be applied to actual product development is formed. Finally, the feasibility of a vehicle steering gear product design process is proved in practice. The research of this article mainly has the following two aspects of academic significance: this article describes the process of product development and design by enterprises under the mass customization production mode. After analyzing the application of CAD technology in the product design process, we studied how to use advanced design knowledge to combine specific three-dimensional CAD software for rapid product design, which can guide manufacturing companies to better carry out product design work. It is proposed to improve and perfect the initial configuration results of products in a specific three-dimensional design environment, and it can communicate with data management systems such as PDM. The configuration results can be edited and modified in the 3D design environment, and when specific parts need to be modified and designed, the parametric module embedded in the 3D design software can be used to design directly, avoiding multiple heterogeneous systems switching back and forth between, shorten the development cycle. In addition, for enterprises, the research in this article is also of great application significance.

Research on Mesh Optimization of the Finite Element Calculation about Three-Dimensional Foundation Pit

2012 ◽  
Vol 487 ◽  
pp. 855-859
Author(s):  
Shi Lun Feng ◽  
Yu Ming Zhou ◽  
Pu Lin Li ◽  
Jun Li ◽  
Zhi Yong Li ◽  
...  
Keyword(s):  
Finite Element ◽  
Complex Geometry ◽  
Three Dimensional ◽  
Mesh Optimization ◽  
Design Calculation ◽  
Foundation Pit ◽  
3D Design ◽  
Finite Element Software ◽  
Core Language ◽  
Grid Division

Abaqus finite element software can implement three-dimensional excavation design calculation, so authors used Python of Abaqus core language made the 3D design of foundation pit supporting program come ture and also did intensive study of mesh optimization during the process. Authors also did intensive comparison and analysis about grid division of the complex geometry foundation pit, through a regularization partion about a variety of special-shaped pit, we made the automatic division about the structural grid of all kinds of shapes foundation pit successful. On this basis, we achieved better calculation effects of the model. The article will introduce problems about optimization of grid in procedure.

scholarly journals Multimedia Teaching Platform for Urban Planning Utilizing 3D Technology

2018 ◽  
Vol 13 (04) ◽  
pp. 187 ◽  
Author(s):  
Xuhui Wang ◽  
Quan Zhang ◽  
Yanyi Chen ◽  
Shihao Liang
Keyword(s):  
High Speed ◽  
Three Dimensional ◽  
Practical Significance ◽  
Master Plan ◽  
3D Technology ◽  
Technology Application ◽  
Teaching Platform ◽  
Multimedia Teaching ◽  
Effect Difference ◽  
Urban Rural

In recent years, 3D technology based on computer and internet has achieved high-speed development. People have realized direct and stereo observation of realistic world. Three-dimensional and visualized characteristics of the technology fit well with the teaching objective of college architecture specialized courses. Thus, 3D model has profound practical significance for its application in urban green space system and urban rural overall planning. With “urban-rural master plan” as experimental course, through design of “urban-rural master plan” multimedia teaching platform based on 3D technology and practice of the teaching platform in course teaching, this article has applied control experiment method and statistical method to make comparative analysis on the teaching effect difference of multimedia teaching platform based on 3D technology application in “urban-rural master plan” as experimental course so as to provide theoretical and data support for 3D technology application in “urban-rural master plan” and other college architecture major courses.

scholarly journals Application of temporary reinforcement technology in insufficient construction of the understructure bearing capacity of viaduct

2019 ◽  
Vol 136 ◽  
pp. 04080
Author(s):  
Guohui Cao ◽  
Reqiang Liu ◽  
Jing Liu ◽  
Xiang Gao ◽  
Peng Wang
Keyword(s):  
Bearing Capacity ◽  
Three Dimensional ◽  
Social Benefits ◽  
Construction Technology ◽  
Project Cost ◽  
Special Cases ◽  
Project Construction ◽  
Lower Structure ◽  
Traditional Construction

The complex three-dimensional traffic construction often occur when the lower structure cannot bear the construction load and other special cases, indicating the need for temporary reinforcement of the lower structure. In this paper, combined with a project construction example, various temporary reinforcement technologies are adopted to solve the insufficient bearing capacity during understructure construction, which poses a serious danger, to ensure synchronous construction of the understructure and viaduct. Compared with the traditional construction technology, the temporary reinforcement technology proposed in this paper features the advantages of saving project cost and time and has achieved better economic and social benefits.

Facilitating 3D Virtual World Learning Environments Creation by Non-Technical End Users through Template-Based Virtual World Instantiation

2013 ◽  
Vol 4 (1) ◽  
pp. 32-48 ◽  
Author(s):  
Chang Liu ◽  
Ying Zhong ◽  
Sertac Ozercan ◽  
Qing Zhu
Keyword(s):  
Learning Environments ◽  
Virtual Worlds ◽  
Virtual World ◽  
Three Dimensional ◽  
End Users ◽  
Preliminary Evaluation ◽  
3D Design ◽  
Domain Specific ◽  
Functional Learning ◽  
Preliminary Experimental Data

This paper presents a template-based solution to overcome technical barriers non-technical computer end users face when developing functional learning environments in three-dimensional virtual worlds (3DVW). iVirtualWorld, a prototype of a platform-independent 3DVW creation tool that implements the proposed solution, facilitates 3DVW learning environment creation through semantics-based abstract 3DVW representation and template-based 3DVW instantiation. iVirtualWorld provides a wizard to guide the 3DVW creation process, and hide low-level programming and 3D design details through higher-level abstracts supported by pre-defined templates. Preliminary evaluation of the effectiveness of iVirtualWorld showed positive results. The contribution of this study is threefold: 1) It provides a paradigm for investigating and developing 3DVW building tools from end users’ perspective; 2) It develops a prototype of a 3DVW building tool, which gives educators a framework to easily create educational virtual worlds using domain-specific concepts; 3) It conducts empirical research and collected preliminary experimental data for evaluation.

scholarly journals Separate and Simultaneous Adjustment of Light Qualities in a Real Scene

i-Perception ◽  
2017 ◽  
Vol 8 (1) ◽  
pp. 204166951668608 ◽  
Author(s):  
Ling Xia ◽  
Sylvia C. Pont ◽  
Ingrid Heynderick
Keyword(s):  
Light Intensity ◽  
Statistical Difference ◽  
Light Field ◽  
Three Dimensional ◽  
Lighting Design ◽  
Illumination Direction ◽  
3D Texture ◽  
Real Scene ◽  
Simultaneous Adjustment ◽  
Rough Sphere

Humans are able to estimate light field properties in a scene in that they have expectations of the objects’ appearance inside it. Previously, we probed such expectations in a real scene by asking whether a “probe object” fitted a real scene with regard to its lighting. But how well are observers able to interactively adjust the light properties on a “probe object” to its surrounding real scene? Image ambiguities can result in perceptual interactions between light properties. Such interactions formed a major problem for the “readability” of the illumination direction and diffuseness on a matte smooth spherical probe. We found that light direction and diffuseness judgments using a rough sphere as probe were slightly more accurate than when using a smooth sphere, due to the three-dimensional (3D) texture. We here extended the previous work by testing independent and simultaneous (i.e., the light field properties separated one by one or blended together) adjustments of light intensity, direction, and diffuseness using a rough probe. Independently inferred light intensities were close to the veridical values, and the simultaneously inferred light intensity interacted somewhat with the light direction and diffuseness. The independently inferred light directions showed no statistical difference with the simultaneously inferred directions. The light diffuseness inferences correlated with but contracted around medium veridical values. In summary, observers were able to adjust the basic light properties through both independent and simultaneous adjustments. The light intensity, direction, and diffuseness are well “readable” from our rough probe. Our method allows “tuning the light” (adjustment of its spatial distribution) in interfaces for lighting design or perception research.

Adapting and Adopting 3D Design Technology to Cruise Ships

2013 ◽  
Author(s):  
M Polini ◽  
◽  
Y Limon Duparcmeur ◽  
P Lemoine ◽  
◽  
...  
Keyword(s):  
3D Design ◽  
Design Technology ◽  
Cruise Ships

Integration of Safety Knowledge into Three-Dimensional Model Design and Construction Plan from the Perspective of Project Executors in Petrochemical Industry

2021 ◽  
Vol 11 (2) ◽  
pp. 185-192
Author(s):  
I-Jyh Wen ◽  
Chien Wei Liang
Keyword(s):  
Petrochemical Industry ◽  
Three Dimensional ◽  
3D Models ◽  
Model Design ◽  
Three Dimensional Model ◽  
3D Design ◽  
Safety And Health ◽  
Job Safety ◽  
Safety Knowledge ◽  
Design And Construction

In petrochemical industry, the execution of construction involves three main issues, namely, design planning, construction, and job safety. Three-dimensional (3D) models are increasingly applied to design and construction. However, the improper concept of 3D design has bred potential unsatisfactory behaviors and the lack of vigilance among workers. Besides, many employees are not fully aware of the safety in 3D design and construction planning. Therefore, our goal is to improve the safety and health of construction workers through design practices in the upstream of the construction phase, and verify the applicability of the combination of 3D models and safety knowledge. Specifically, a questionnaire survey was carried out among 124 employees in the construction-related fields of the petrochemical industry. The collected data were processed, and statically analyzed on SPSS. The results show that safety knowledge was acceptable in 3D model design from the perspective of project executors, and the integration of safety knowledge into the design helps to improve the safety environment of the construction site.

Sign in / Sign up

Export Citation Format

Share Document