scholarly journals High precision positioning system for autopilot based on multi-sensor fusion

2021 ◽  
Vol 257 ◽  
pp. 02061
Author(s):  
Haoru Luo ◽  
Kechun Liu
Keyword(s):  
Real Time ◽  
Sensor Fusion ◽  
High Precision ◽  
Autonomous Vehicles ◽  
Autonomous Vehicle ◽  
Positioning System ◽  
Signal Loss ◽  
Automatic Driving ◽  
Core Technology ◽  
Positioning Method

For autonomous vehicles, autonomous positioning is a core technology in their development. A good positioning system not only helps them efficiently complete autonomous operations, but also improves safety performance. At present, the use of global positioning system (GPS) is a more mainstream positioning method, but in indoor, serious shelter and other environments, GPS signal loss will lead to positioning failure. In order to solve this problem, this paper proposes a method of mapping before positioning, and designs a set of high precision real-time positioning system by combining the technology of multi-sensor fusion. The designed system was carried on a Wuling sightseeing bus, and the mapping and positioning tests were carried out in the Nanhu Campus of Wuhan University of Technology, the East Campus of Mafangshan Campus and the underground garage where GPS signals were lost. The test results show that the system can realize the high precision real-time positioning function of the autonomous vehicle. Therefore, the in-depth study and implementation of this system is of great significance to the promotion and application of the automatic driving industry.

scholarly journals Real-Time Hybrid Multi-Sensor Fusion Framework for Perception in Autonomous Vehicles

Sensors ◽  
2019 ◽  
Vol 19 (20) ◽  
pp. 4357 ◽  
Author(s):  
Babak Shahian Jahromi ◽  
Theja Tulabandhula ◽  
Sabri Cetin
Keyword(s):  
Real Time ◽  
Sensor Fusion ◽  
Autonomous Vehicles ◽  
Autonomous Vehicle ◽  
Obstacle Detection ◽  
Sensor Data ◽  
Detection Accuracy ◽  
System Solution ◽  
Environment Perception ◽  
Fusion Framework

There are many sensor fusion frameworks proposed in the literature using different sensors and fusion methods combinations and configurations. More focus has been on improving the accuracy performance; however, the implementation feasibility of these frameworks in an autonomous vehicle is less explored. Some fusion architectures can perform very well in lab conditions using powerful computational resources; however, in real-world applications, they cannot be implemented in an embedded edge computer due to their high cost and computational need. We propose a new hybrid multi-sensor fusion pipeline configuration that performs environment perception for autonomous vehicles such as road segmentation, obstacle detection, and tracking. This fusion framework uses a proposed encoder-decoder based Fully Convolutional Neural Network (FCNx) and a traditional Extended Kalman Filter (EKF) nonlinear state estimator method. It also uses a configuration of camera, LiDAR, and radar sensors that are best suited for each fusion method. The goal of this hybrid framework is to provide a cost-effective, lightweight, modular, and robust (in case of a sensor failure) fusion system solution. It uses FCNx algorithm that improve road detection accuracy compared to benchmark models while maintaining real-time efficiency that can be used in an autonomous vehicle embedded computer. Tested on over 3K road scenes, our fusion algorithm shows better performance in various environment scenarios compared to baseline benchmark networks. Moreover, the algorithm is implemented in a vehicle and tested using actual sensor data collected from a vehicle, performing real-time environment perception.

High-precision roll attitude estimation of decoupled canards relative to the projectile body using bipolar hall-effect sensors

2021 ◽  
pp. 1-9
Author(s):  
Tingting Yin ◽  
Zhong Yang ◽  
Youlong Wu ◽  
Fangxiu Jia
Keyword(s):  
Hall Effect ◽  
Real Time ◽  
High Precision ◽  
Solution Method ◽  
Estimation Method ◽  
Estimation Algorithm ◽  
Attitude Estimation ◽  
Fuzzy Algorithms ◽  
Positioning Method ◽  
Hall Effect Sensors

The high-precision roll attitude estimation of the decoupled canards relative to the projectile body based on the bipolar hall-effect sensors is proposed. Firstly, the basis engineering positioning method based on the edge detection is introduced. Secondly, the simplified dynamic relative roll model is established where the feature parameters are identified by fuzzy algorithms, while the high-precision real-time relative roll attitude estimation algorithm is proposed. Finally, the trajectory simulations and grounded experiments have been conducted to evaluate the advantages of the proposed method. The positioning error is compared with the engineering solution method, and it is proved that the proposed estimation method has the advantages of the high accuracy and good real-time performance.

scholarly journals Computer vision based obstacle detection and target tracking for autonomous vehicles

2021 ◽  
Vol 336 ◽  
pp. 07004
Author(s):  
Ruoyu Fang ◽  
Cheng Cai
Keyword(s):  
Neural Network ◽  
Computer Vision ◽  
Deep Learning ◽  
Target Tracking ◽  
Real Time ◽  
Autonomous Vehicles ◽  
Autonomous Vehicle ◽  
Obstacle Detection ◽  
Pid Algorithm ◽  
Deep Learning Neural Network

Obstacle detection and target tracking are two major issues for intelligent autonomous vehicles. This paper proposes a new scheme to achieve target tracking and real-time obstacle detection of obstacles based on computer vision. ResNet-18 deep learning neural network is utilized for obstacle detection and Yolo-v3 deep learning neural network is employed for real-time target tracking. These two trained models can be deployed on an autonomous vehicle equipped with an NVIDIA Jetson Nano motherboard. The autonomous vehicle moves to avoid obstacles and follow tracked targets by camera. Adjusting the steering and movement of the autonomous vehicle according to the PID algorithm during the movement, therefore, will help the proposed vehicle achieve stable and precise tracking.

scholarly journals Automated Testing of Ultrawideband Positioning for Autonomous Driving

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Benjamin Vedder ◽  
Bo Joel Svensson ◽  
Jonny Vinter ◽  
Magnus Jonsson
Keyword(s):  
Fault Tolerance ◽  
Real Time ◽  
Autonomous Vehicles ◽  
Fault Injection ◽  
Autonomous Driving ◽  
Automated Testing ◽  
Test Cases ◽  
Positioning System ◽  
Novel Approach ◽  
Driving Model

Autonomous vehicles need accurate and dependable positioning, and these systems need to be tested extensively. We have evaluated positioning based on ultrawideband (UWB) ranging with our self-driving model car using a highly automated approach. Random drivable trajectories were generated, while the UWB position was compared against the Real-Time Kinematic Satellite Navigation (RTK-SN) positioning system which our model car also is equipped with. Fault injection was used to study the fault tolerance of the UWB positioning system. Addressed challenges are automatically generating test cases for real-time hardware, restoring the state between tests, and maintaining safety by preventing collisions. We were able to automatically generate and carry out hundreds of experiments on the model car in real time and rerun them consistently with and without fault injection enabled. Thereby, we demonstrate one novel approach to perform automated testing on complex real-time hardware.

Low-Cost Receiver and Network Real-Time Kinematic Positioning for use in Connected and Autonomous Vehicles

2019 ◽  
Vol 72 (04) ◽  
pp. 917-930
Author(s):  
Fang-Shii Ning ◽  
Xiaolin Meng ◽  
Yi-Ting Wang
Keyword(s):  
Real Time ◽  
Autonomous Vehicles ◽  
High Performance ◽  
Low Cost ◽  
Satellite System ◽  
High Accuracy ◽  
Future Trend ◽  
Intelligent Transport System ◽  
Positioning System ◽  
Gnss Receiver

Connected and Autonomous Vehicles (CAVs) have been researched extensively for solving traffic issues and for realising the concept of an intelligent transport system. A well-developed positioning system is critical for CAVs to achieve these aims. The system should provide high accuracy, mobility, continuity, flexibility and scalability. However, high-performance equipment is too expensive for the commercial use of CAVs; therefore, the use of a low-cost Global Navigation Satellite System (GNSS) receiver to achieve real-time, high-accuracy and ubiquitous positioning performance will be a future trend. This research used RTKLIB software to develop a low-cost GNSS receiver positioning system and assessed the developed positioning system according to the requirements of CAV applications. Kinematic tests were conducted to evaluate the positioning performance of the low-cost receiver in a CAV driving environment based on the accuracy requirements of CAVs. The results showed that the low-cost receiver satisfied the “Where in Lane” accuracy level (0·5 m) and achieved a similar positioning performance in rural, interurban, urban and motorway areas.

scholarly journals SAGE: A S plit- A rchitecture Methodolo g y for E fficient End-to-End Autonomous Vehicle Control

2021 ◽  
Vol 20 (5s) ◽  
pp. 1-22
Author(s):  
Arnav Malawade ◽  
Mohanad Odema ◽  
Sebastien Lajeunesse-degroot ◽  
Mohammad Abdullah Al Faruque
Keyword(s):  
High Resolution ◽  
Real Time ◽  
Autonomous Vehicles ◽  
Autonomous Vehicle ◽  
Industry Standard ◽  
Wide Range ◽  
Energy Consuming ◽  
Time Latency ◽  
4G Lte ◽  
Hardware Platforms

Autonomous vehicles (AV) are expected to revolutionize transportation and improve road safety significantly. However, these benefits do not come without cost; AVs require large Deep-Learning (DL) models and powerful hardware platforms to operate reliably in real-time, requiring between several hundred watts to one kilowatt of power. This power consumption can dramatically reduce vehicles’ driving range and affect emissions. To address this problem, we propose SAGE: a methodology for selectively offloading the key energy-consuming modules of DL architectures to the cloud to optimize edge, energy usage while meeting real-time latency constraints. Furthermore, we leverage Head Network Distillation (HND) to introduce efficient bottlenecks within the DL architecture in order to minimize the network overhead costs of offloading with almost no degradation in the model’s performance. We evaluate SAGE using an Nvidia Jetson TX2 and an industry-standard Nvidia Drive PX2 as the AV edge, devices and demonstrate that our offloading strategy is practical for a wide range of DL models and internet connection bandwidths on 3G, 4G LTE, and WiFi technologies. Compared to edge-only computation, SAGE reduces energy consumption by an average of 36.13% , 47.07% , and 55.66% for an AV with one low-resolution camera, one high-resolution camera, and three high-resolution cameras, respectively. SAGE also reduces upload data size by up to 98.40% compared to direct camera offloading.

scholarly journals Motion Planning for Autonomous Vehicles Considering Longitudinal and Lateral Dynamics Coupling

2020 ◽  
Vol 10 (9) ◽  
pp. 3180 ◽  
Author(s):  
Dongfang Dang ◽  
Feng Gao ◽  
Qiuxia Hu
Keyword(s):  
Motion Planning ◽  
Autonomous Vehicles ◽  
Autonomous Vehicle ◽  
Dynamical Model ◽  
Planning Problem ◽  
Original Design ◽  
Automatic Driving ◽  
Wide Range ◽  
Planning Algorithm ◽  
Dynamical Coupling

Vehicles are highly coupled and multi-degree nonlinear systems. The establishment of an appropriate vehicle dynamical model is the basis of motion planning for autonomous vehicles. With the development of autonomous vehicles from L2 to L3 and beyond, the automatic driving system is required to make decisions and plans in a wide range of speeds and on bends with large curvature. In order to make precise and high-quality control maneuvers, it is important to account for the effects of dynamical coupling in these working conditions. In this paper, a new single-coupled dynamical model (SDM) is proposed to deal with the various dynamical coupling effects by identifying and simplifying the complicated one. An autonomous vehicle motion planning problem is then formulated using the nonlinear model predictive control theory (NMPC) with the SDM constraint (NMPC-SDM). We validated the NMPC-SDM with hardware-in-the-loop (HIL) experiments to evaluate improvements to control performance by comparing with the planners original design, using the kinematic and single-track models. The comparative results show the superiority of the proposed motion planning algorithm in improving the maneuverability and tracking performance.

The Study Based on LABVIEW of the Positioning Accuracy of Spinneret Microporous Fine Machine

2013 ◽  
Vol 712-715 ◽  
pp. 1347-1350
Author(s):  
Si Yu Liu ◽  
Pei Feng ◽  
Chong Chang Yang
Keyword(s):  
Pore Size ◽  
High Precision ◽  
Vital Role ◽  
Positioning System ◽  
Precision Positioning ◽  
Positioning Accuracy ◽  
Small Pore Size ◽  
Small Pore ◽  
Positioning Method

The microporous on spinneret has the characteristics of high precision, small pore size and large quantity. Spinneret microporous finishing operation is mainly used for removing the burr formed on the spinneret silk surface after micropores drilling and punching. The burrs seriously affect the quality of the spinning fibers. Micropore spinneret finishing plays a vital role in improving the quality of processing micropore. This paper introduces a system consisting of the spinneret micropore fine machine,then focuses on fine machine positioning system and proposes a high-precision positioning method of the microporous.

An improved INS/PDR/UWB integrated positioning method for indoor foot-mounted pedestrians

Sensor Review ◽  
2019 ◽  
Vol 39 (3) ◽  
pp. 318-331 ◽  
Author(s):  
Qigao Fan ◽  
Jie Jia ◽  
Peng Pan ◽  
Hai Zhang ◽  
Yan Sun
Keyword(s):  
Kalman Filter ◽  
Real Time ◽  
Navigation System ◽  
Inertial Navigation System ◽  
Integrated System ◽  
Positioning System ◽  
Adaptive Kalman Filter ◽  
Content Type ◽  
Positioning Method ◽  
Accuracy And Stability

Purpose The purpose of this paper is to relate to the real-time navigation and tracking of pedestrians in a closed environment. To restrain accumulated error of low-cost microelectromechanical system inertial navigation system and adapt to the real-time navigation of pedestrians at different speeds, the authors proposed an improved inertial navigation system (INS)/pedestrian dead reckoning (PDR)/ultra wideband (UWB) integrated positioning method for indoor foot-mounted pedestrians. Design/methodology/approach This paper proposes a self-adaptive integrated positioning algorithm that can recognize multi-gait and realize a high accurate pedestrian multi-gait indoor positioning. First, the corresponding gait method is used to detect different gaits of pedestrians at different velocities; second, the INS/PDR/UWB integrated system is used to get the positioning information. Thus, the INS/UWB integrated system is used when the pedestrian moves at normal speed; the PDR/UWB integrated system is used when the pedestrian moves at rapid speed. Finally, the adaptive Kalman filter correction method is adopted to modify system errors and improve the positioning performance of integrated system. Findings The algorithm presented in this paper improves performance of indoor pedestrian integrated positioning system from three aspects: in the view of different pedestrian gaits at different speeds, the zero velocity detection and stride frequency detection are adopted on the integrated positioning system. Further, the accuracy of inertial positioning systems can be improved; the attitude fusion filter is used to obtain the optimal quaternion and improve the accuracy of INS positioning system and PDR positioning system; because of the errors of adaptive integrated positioning system, the adaptive filter is proposed to correct errors and improve integrated positioning accuracy and stability. The adaptive filtering algorithm can effectively restrain the divergence problem caused by outliers. Compared to the KF algorithm, AKF algorithm can better improve the fault tolerance and precision of integrated positioning system. Originality/value The INS/PDR/UWB integrated system is built to track pedestrian position and attitude. Finally, an adaptive Kalman filter is used to improve the accuracy and stability of integrated positioning system.

Sign in / Sign up

Export Citation Format

Share Document