scholarly journals Development of cost-effective enclosing structures with high heat transfer resistance

2021 ◽  
Vol 258 ◽  
pp. 09040
Author(s):  
Alexandr Meneiliuk ◽  
Stanislav Kyryliuk ◽  
Larisa Cherepashchuk
Keyword(s):  
Heat Transfer ◽  
Comparative Analysis ◽  
Building Materials ◽  
Cost Effective ◽  
Weight Coefficient ◽  
High Heat ◽  
Final Decision ◽  
Transfer Resistance ◽  
High Heat Transfer ◽  
Design Solutions

Considered is the solution to the problem of choosing an economical option for the construction of low-rise buildings and the creation of new economical design solutions with high thermal performance. The well-known technologies of building construction are analyzed using qualitative, quantitative and comparative analysis. Quantitative indicators were selected, such as wall thickness, weight of 1 m2 of wall, resistance to heat transfer, area of premises, cost, durability, tendency to shrinkage. As qualitative indicators used: seasonality of the use of solutions, resistance to the formation of mold, decay and destruction, especially the delivery of building materials. The method of multi-criteria analysis was also applied to determine the most effective technology. Calculated the cost of various types of design solutions based on economic calculated simulations. The technological solutions were assessed by quantitative criteria on a ten-point scale, where the minimum and maximum values were assigned points 1 and 10, respectively. Graphic modeling of the compared construction options was carried out and the corresponding diagrams were built. Added “weight” coefficient of criteria for the final decision on the choice of the optimal technology for the construction of buildings. The most effective constructive solution was selected based on the results of a comparative analysis, taking into account the “weight” coefficient.

Influence of tip clearance and cavity depth on heat transfer in a cutback squealer tip

2020 ◽  
pp. 095441002096469
Author(s):  
Weijie Wang ◽  
Shaopeng Lu ◽  
Hongmei Jiang ◽  
Qiusheng Deng ◽  
Jinfang Teng ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Suction Side ◽  
High Heat ◽  
Tip Clearance ◽  
Tip Leakage Flow ◽  
Trailing Edge ◽  
Cavity Depth ◽  
High Heat Transfer ◽  
Blade Tip ◽  
High Heat Transfer Coefficient

Numerical simulations are conducted to present the aerothermal performance of a turbine blade tip with cutback squealer rim. Two different tip clearance heights (0.5%, 1.0% of the blade span) and three different cavity depths (2.0%, 3.0%, and 6.0% of the blade span) are investigated. The results show that a high heat transfer coefficient (HTC) strip on the cavity floor appears near the suction side. It extends with the increase of tip clearance height and moves towards the suction side with the increase of cavity depth. The cutback region near the trailing edge has a high HTC value due to the flush of over-tip leakage flow. High HTC region shrinks to the trailing edge with the increase of cavity depth since there is more accumulated flow in the cavity for larger cavity depth. For small tip clearance cases, high HTC distribution appears on the pressure side rim. However, high HTC distribution is observed on suction side rim for large tip clearance height. This is mainly caused by the flow separation and reattachment on the squealer rims.

Possible Mechanisms for Thermal Conductivity Enhancement in Nanofluids

2006 ◽  
Author(s):  
Amit Gupta ◽  
Xuan Wu ◽  
Ranganathan Kumar
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Brownian Motion ◽  
Brownian Dynamics ◽  
Lattice Vibration ◽  
Experimental Studies ◽  
High Heat ◽  
Conductivity Enhancement ◽  
High Heat Transfer ◽  
Dynamics Simulations

This study discusses the merits of various physical mechanisms that are responsible for enhancing the heat transfer in nanofluids. Experimental studies have cemented the claim that ‘seeding’ liquids with nanoparticles can increase the thermal conductivity of the nanofluid by up to 40% for metallic and oxide nanoparticles dispersed in a base liquid. Experiments have also shown that the rise in conductivity of the nanofluid is highly dependent on the size and concentration of the nanoparticles. On the theoretical side, traditional models like Maxwell or Hamilton-Crosser models cannot explain this unusually high heat transfer. Several mechanisms have been postulated in the literature such as Brownian motion, thermal diffusion in nanoparticles and thermal interaction of nanoparticles with the surrounding fluid, the formation of an ordered liquid layer on the surface of the nanoparticle and microconvection. This study concentrates on 3 possible mechanisms: Brownian dynamics, microconvection and lattice vibration of nanoparticles in the fluid. By considering two nanofluids, copper particles dispersed in ethylene glycol, and silica in water, it is determined that translational Brownian motion of the nanoparticles, presence of an interparticle potential and the microconvection heat transfer are mechanisms that play only a smaller role in the enhancement of thermal conductivity. On the other hand, the lattice vibrations, determined by molecular dynamics simulations show a great deal of promise in increasing the thermal conductivity by as much as 23%. In a simplistic sense, the lattice vibration can be regarded as a means to simulate the phononic transport from solid to liquid at the interface.

A Photographic Study of Flow Boiling Stability on a Plain Surface With Tapered Manifold

2015 ◽  
Author(s):  
Ankit Kalani ◽  
Satish G. Kandlikar
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
High Speed ◽  
Flow Boiling ◽  
High Heat ◽  
Bubble Nucleation ◽  
High Heat Transfer ◽  
Plain Surface ◽  
High Heat Transfer Coefficient

Flow boiling in microchannels offers many advantages such as high heat transfer coefficient, higher surface area to volume ratio, low coolant inventory, uniform temperature control and compact design. The application of these flow boiling systems has been severely limited due to early critical heat flux (CHF) and flow instability. Recently, a number of studies have focused on variable flow cross-sectional area to augment the thermal performance of microchannels. In a previous work, the open microchannel with manifold (OMM) configuration was experimentally investigated to provide high heat transfer coefficient coupled with high CHF and low pressure drop. In the current work, high speed images of plain surface using tapered manifold are obtained to gain an insight into the nucleating bubble behavior. The mechanism of bubble nucleation, growth and departure are described through high speed images. Formation of dry spots for both tapered and uniform manifold geometry is also discussed.

Impact of Stefan blowing and magnetic dipole on bio-convective flow of Maxwell nanofluid over a stretching sheet

2021 ◽  
pp. 095440892110581
Author(s):  
A. Alhadhrami ◽  
Hassan A. H. Alzahrani ◽  
B. M. Prasanna ◽  
N. Madhukeshwara ◽  
K. C. Rajendraprasad ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Brownian Motion ◽  
Magnetic Dipole ◽  
Stretching Sheet ◽  
High Heat ◽  
Hard Drives ◽  
Linear System Of Equations ◽  
High Heat Transfer ◽  
Non Linear System ◽  
The Impact

The features of ferromagnetic fluids make it supportive for an extensive usage in loudspeakers, magnetic resonance imaging, computer hard drives, directing of magnetic drug and magnetic hyperthermia. Owing to all such potential applications, the current investigation is to understand the relationship between the thermal distribution, magnetic field and resulting fluid flow of Maxwell liquid over a stretching sheet. Investigation of thermal energy and concentration is carried out in the presence of thermal radiation, non-uniform heat sink/source, chemical reaction, Stefan blowing, magnetic dipole, thermophoresis and Brownian motion. Also, microorganisms are considered just to stabilize the suspended nanoparticles. Boundary layer approximation is employed during mathematical derivation. Based on a new constitutive relation, the governing equations are formulated and are reduced into a coupled non-linear system of equations using appropriate transformations. Further, these equations are solved numerically using fourth-order Runge–Kutta method with shooting technique. The impact of involved parameters is discussed and analysed graphically. Outcomes disclose that Newtonian liquid shows high heat transfer when compared to non-Newtonian (Maxwell) liquid for increased values of Brownian motion and thermophoresis parameters. Increased values of Peclet number declines the rate of gyrotactic microorganisms. Finally, an increase in Brownian and thermophoresis motion parameters declines the rate of heat transfer.

Heat Transfer Characteristics of a Flow Passage With Long Pin Fins and Improving Heat Transfer Coefficient by Adding Turbulence Promoters on a Endwall

2001 ◽  
Author(s):  
K. Takeishi ◽  
T. Nakae ◽  
K. Watanabe ◽  
M. Hirayama
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Aspect Ratio ◽  
Transfer Coefficient ◽  
High Heat ◽  
Atmospheric Conditions ◽  
Pin Fin ◽  
High Heat Transfer ◽  
Turbine Vanes ◽  
Pin Fins

Pin fins are normally used for cooling the trailing edge region of a turbine, where their aspect ratio (height H/diameter D) is characteristically low. In small turbine vanes and blades, however, pin fins may also be located in the middle region of the airfoil. In this case, the aspect ratio can be quite large, usually obtaining values greater than 4. Heat transfer tests, which are conducted under atmospheric conditions for the cooling design of turbine vanes and blades, may overestimate the heat transfer coefficient of the pin-finned flow channel for such long pin fins. The fin efficiency of a long pin fin is almost unity in a low heat transfer situation as it would be encountered under atmospheric conditions, but can be considerably lower under high heat transfer conditions and for pin fins made of low thermal conductivity material. A series of tests with corresponding heat transfer models has been conducted in order to clarify the heat transfer characteristics of the long pin-finned flow channel. It is assumed that heat transfer coefficients can be predicted by the linear combination of two heat transfer equations, which were separately developed for the pin fin surface and for tubes in crossflow. To confirm the suggested combined equations, experiments have been carried out, in which the aspect ratio and the thermal conductivity of the pin were the test parameters. To maintain a high heat transfer coefficient for a long pin fin under high-pressure conditions, the heat transfer was augmented by adding a turbulence promoter on the pin-finned endwall surface. A corresponding equation that describes this situation has been developed. The predicted and measured values showed good agreement. In this paper, a comprehensive study on the heat transfer of a long pin-fin array will be presented.

Heat Transfer Behavior of Silica Nanoparticles in Pool Boiling Experiment

2008 ◽  
Vol 130 (4) ◽  
Author(s):  
Denitsa Milanova ◽  
Ranganathan Kumar
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Chemical Composition ◽  
Particle Deposition ◽  
Ph Value ◽  
Pool Boiling ◽  
High Heat ◽  
Boiling Regime ◽  
High Heat Transfer ◽  
The Wire

The heat transfer characteristics of silica (SiO2) nanofluids at 0.5vol% concentration and particle sizes of 10nm and 20nm in pool boiling with a suspended heating Nichrome wire have been analyzed. The influence of acidity on heat transfer has been studied. The pH value of the nanosuspensions is important from the point of view that it determines the stability of the particles and their mutual interactions toward the suspended heated wire. When there is no particle deposition on the wire, the nanofluid increases critical heat flux (CHF) by about 50% within the uncertainty limits regardless of pH of the base fluid or particle size. The extent of oxidation on the wire impacts CHF, and is influenced by the chemical composition of nanofluids in buffer solutions. The boiling regime is further extended to higher heat flux when there is agglomeration on the wire. This agglomeration allows high heat transfer through interagglomerate pores, resulting in a nearly threefold increase in burnout heat flux. This deposition occurs for the charged 10nm silica particle. The chemical composition, oxidation, and packing of the particles within the deposition on the wire are shown to be the reasons for the extension of the boiling regime and the net enhancement of the burnout heat flux.

Experimental study on a R134a loop heat pipe with high heat transfer capacity

2021 ◽  
Author(s):  
Changwu Xiong ◽  
Lizhan Bai ◽  
Hechao Li ◽  
Yuandong Guo ◽  
Yating Yu ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Heat Pipe ◽  
High Heat ◽  
Loop Heat Pipe ◽  
High Heat Transfer ◽  
Heat Transfer Capacity
Sign in / Sign up

Export Citation Format

Share Document