scholarly journals Validation of numerical methods for flow patterns modeling based on comparison with the results of laboratory experiments using visualization methods

2019 ◽  
Vol 213 ◽  
pp. 02072
Author(s):  
Daniil Sergeev ◽  
Alexander Kandaurov ◽  
Olga Ermakova ◽  
Anatoly Suvorov

A series of laboratory and numerical experiments were carried out to study the structure of the turbulent flow over a rectangular obstacle for high Reynolds number. The results of numerical simulation performed within ANSYS CFX were verified on data obtained in the wind tunnel of IAP RAS by visualization methods including Particle Image Velocimetry. It was found that the airflow over the obstacle can be conditionally divided into main several regions: the region of the initiation of the detachment and formation shielding zone, the region of the maximum vertical separation and vortex development and the region of flow reattachment. Comparison of numerical calculations with the results of experiments showed that the physical processes of the airflow around model objects can be optimally modeled in a three-dimensional setting using the Detached Eddy turbulence model (DES) with central numerical differentiation scheme and allowed to select optimal parameters of calculation grid.

2020 ◽  
Vol 307 ◽  
pp. 01006
Author(s):  
Benahmed Lamia ◽  
Aliane Khaled ◽  
Z. Sari Hassoun

In this work we study the influence of the inclined shape of the lover and downstream edge of a rectangular obstacle. We analyze the dimensions of the recirculation zones, the velocity field, the kinetic energy and the pressure. A three-dimensional study was conducted using the ansys cfx calculation code. The turbulence model k-ԑ is used to model turbulence, and the governing equations are resolved by the finite volume method.


2021 ◽  
Vol 3 ◽  
Author(s):  
H. You ◽  
M. Muste ◽  
D. Kim ◽  
S. Baranya

Non-intrusive technologies for the in-situ measurement of river morphological features are increasingly popular in the scientific and practice communities due to their efficient and productive data acquisition. While the measurement of suspended load with optical and acoustic technologies is currently an active area of research, the measurement of bedform dynamics has not experienced similar progress. We have successfully demonstrated through laboratory experiments that, by combining acoustic mapping with image velocimetry concepts, we can characterize the planar dynamics of the bedform migration. The technique, labeled Acoustic Mapping Velocimetry (AMV), is currently transferred to field conditions using multiple-beam echo-sounders (MBES) for producing acoustic maps. During this transfer, new questions emerged because, in field conditions, many of the morphologic features targeted by AMV measurements are not a priori known. Moreover, the image velocimetry processing can be approached with several alternatives, each of them characterized by strength and limitations. This paper assembles guidelines for establishing optimal parameters for the acquisition of the acoustic maps based on analytical considerations, and for selecting essential features of the processing for image velocimetry. We test these guidelines using MBES data acquired in the Mississippi River.


2016 ◽  
Author(s):  
Riley R. Schutt ◽  
C. H. K. Williamson

In small sailboats, the bodyweight of the sailor is proportionately large enough to induce significant unsteady dynamics of the boat and sail. Sailors use a variety of techniques to create sail dynamics which can provide an increment in thrust, increasing the boatspeed. In this study, we experimentally investigate the unsteady aerodynamics associated with two such techniques, “upwind leech flicking" and “downwind S-turns". We employ a two-part approach. First, on-the-water experiments are carried out using a Laser class sailboat sailed by Olympic and world championship level sailors. Data collected from an on-board GPS, IMU, anemometer, and camera array is used to generate characteristic motions of the boat and sail relative to the apparent wind. Second, laboratory experiments using the characteristic motion of the sail are run in a computer-controlled 3 degree-of-freedom (X, Y, and θ) towing tank. We use water as the working fluid. Rather than directly experiment with three-dimensional sail shapes, we represent the primary effects of the sail dynamics using rapidly prototyped two-dimensional flexible sail geometries. Shapes are based on extruded draft stripes from the upper third of the sail. The laboratory experiments approximately match the key non-dimensional parameters of the on-the-water sailing conditions, including the reduced frequency and heave-to-chord ratio. Particle Image Velocimetry and force measurements are used to analyze the flow field and thrust generated by the model sail during the dynamic motions. On-the-water testing shows that the characteristic sail motion in leech flicking is a combination of periodic heave caused by the actions of the sailor and a passive twisting of the sail due to rig flexibility. The heaving sail motions are due to rotation (roll) of the rig around the longitudinal axis of the hull. This is at an angle to the apparent wind, resulting in heave that has components both perpendicular and parallel to the oncoming wind flow. This is distinct from classical aerodynamic studies with heave purely perpendicular to the incoming flow. In laboratory experiments, the characteristic flicking motion is applied to a NACA 0012 airfoil and a 2D sail, both angled at 15 deg to the flow. Lift increases and drag decreases, leading to an overall increase in resultant driving force of the boat. The beneficial effect of this dynamic motion becomes greater as the apparent wind angle increases. In the case of leech flicking, the experiments show that the formation of vortex pairs is fundamental to the augmented thrust due to heaving. The presence of S-turns, whereby the sailor changes the boats direction simultaneous with rolling the boat, generally in the downwind direction, is also associated with vortex formation and pairing, which will be described at the conference. During downwind S-turns, large amplitude heaving motions are paired with substantial rotations of the sail caused by both adjustments of the main sheet and changes in heading. Increased velocity made good downwind is measured from the on-the-water experiments, and is associated with an increase of thrust during characteristic dynamics of the airfoil or sail shape in the laboratory.


2016 ◽  
Vol 13 (116) ◽  
pp. 20160068 ◽  
Author(s):  
Gen Li ◽  
Ulrike K. Müller ◽  
Johan L. van Leeuwen ◽  
Hao Liu

Larvae of bony fish swim in the intermediate Reynolds number ( Re ) regime, using body- and caudal-fin undulation to propel themselves. They share a median fin fold that transforms into separate median fins as they grow into juveniles. The fin fold was suggested to be an adaption for locomotion in the intermediate Reynolds regime, but its fluid-dynamic role is still enigmatic. Using three-dimensional fluid-dynamic computations, we quantified the swimming trajectory from body-shape changes during cyclic swimming of larval fish. We predicted unsteady vortices around the upper and lower edges of the fin fold, and identified similar vortices around real larvae with particle image velocimetry. We show that thrust contributions on the body peak adjacent to the upper and lower edges of the fin fold where large left–right pressure differences occur in concert with the periodical generation and shedding of edge vortices. The fin fold enhances effective flow separation and drag-based thrust. Along the body, net thrust is generated in multiple zones posterior to the centre of mass. Counterfactual simulations exploring the effect of having a fin fold across a range of Reynolds numbers show that the fin fold helps larvae achieve high swimming speeds, yet requires high power. We conclude that propulsion in larval fish partly relies on unsteady high-intensity vortices along the upper and lower edges of the fin fold, providing a functional explanation for the omnipresence of the fin fold in bony-fish larvae.


Author(s):  
Y Wu ◽  
X Zhu ◽  
Z Du

A developed plate stator model with and without trailing edge blowing (TEB) is studied using experimental methods. Wake characteristics of flow over the stator in the three-dimensional wake regimes are studied using hot-wire anemometry (HWA) and particle image velocimetry (PIV) techniques. First, the mean velocity profiles have been measured in the wake of the stator using HWA. Four wake characteristics have been obtained through momentum thickness judgments: pure wake, weak wake, momentumless wake, and jet. These velocity profiles show some differences in momentum deficit for the four cases. Then, the velocity spectra of the pure wake and momentumless wake obtained through the HWA measurements showed that TEB can eliminate the shedding vortex of the stator. Characteristic length scales based on the wake turbulent intensity profiles showed that the momentumless wake can reduce the wake width and depth. PIV measurement is carried out to measure the flow field of the four wakes. Finally, the application of TEB approaching momentumless wake status is used on an industrial ventilation low-pressure axial fan to assess noise reduction. The results show that TEB can make the outlet of the stator uniform, reduce velocity fluctuation, destroy the vorticity structure downstream of the stator, and reduce interaction noise level of the stator and rotor.


2008 ◽  
Vol 615 ◽  
pp. 371-399 ◽  
Author(s):  
S. DONG

We report three-dimensional direct numerical simulations of the turbulent flow between counter-rotating concentric cylinders with a radius ratio 0.5. The inner- and outer-cylinder Reynolds numbers have the same magnitude, which ranges from 500 to 4000 in the simulations. We show that with the increase of Reynolds number, the prevailing structures in the flow are azimuthal vortices with scales much smaller than the cylinder gap. At high Reynolds numbers, while the instantaneous small-scale vortices permeate the entire domain, the large-scale Taylor vortex motions manifested by the time-averaged field do not penetrate a layer of fluid near the outer cylinder. Comparisons between the standard Taylor–Couette system (rotating inner cylinder, fixed outer cylinder) and the counter-rotating system demonstrate the profound effects of the Coriolis force on the mean flow and other statistical quantities. The dynamical and statistical features of the flow have been investigated in detail.


2014 ◽  
Vol 543-547 ◽  
pp. 434-440
Author(s):  
Qiang Liu ◽  
Wei Xie ◽  
Wen Yang Duan ◽  
Chang Hong Hu

Based on fully structured grids parallel numerical simulations of flow around a cylinder under different Reynolds number are carried out. Two-dimensional and three-dimensional models are established at the same time under specific Reynolds number, and further analyze of three-dimensional flow characteristics as well as the generated influence to overall physical quantities are presented. In order to explore efficient high Reynolds number turbulence models, a comparative research of the LES model without wall functions and the Spalart-Allmaras turbulence model is carried out. In order to improve the computational efficiency, a domain decomposition parallel computing strategy is used, and a calculation strategy that results of coarse grid was assigned to fine grid as initial field value by 3D linear interpolation is presented. Simulation results show that: Drag coefficient and Strouhal number have very good consistency with the experimental data, which verifies the correctness of the calculation method; Even if at low Reynolds number (200≤Re≤300), using a three-dimensional model is still necessary; While in the high Reynolds number stage, compared to LES model without wall functions, Spalart-Allmaras model is more applicable and more efficient.


2000 ◽  
Author(s):  
Joseph M. Bauer ◽  
David J. Beebe

Abstract A technique for determining the three dimensional motions of hydrogel structures in microchannels is introduced. In developing this technique, we have adapted microscopic particle image velocimetry (μPIV), a method for measuring velocity fields in microfluidic devices. The motions of 1 μm fluorescent seed particles that are incorporated into a hydrogel microstructure (200 μm tall × 400 μm diameter) are tracked over several expansion cycles using microscopy. Combining measurements taken in different planes produces a three-dimensional representation of the motions present during volume changes can be reconstructed. By providing cross sections of the local deformation rates in hydrogel microstructures, this technique allows for the optimization of device designs as well as providing a better understanding of the processes by which hydrogels change volume under mechanical constraints.


Sign in / Sign up

Export Citation Format

Share Document