scholarly journals Considerations on Acoustic Mapping Velocimetry (AMV) Application for in-situ Measurement of Bedform Dynamics

2021 ◽  
Vol 3 ◽  
Author(s):  
H. You ◽  
M. Muste ◽  
D. Kim ◽  
S. Baranya
Keyword(s):  
Mississippi River ◽  
Laboratory Experiments ◽  
A Priori ◽  
Suspended Load ◽  
Field Conditions ◽  
Optimal Parameters ◽  
Image Velocimetry ◽  
Acoustic Technologies ◽  
Acoustic Mapping

Non-intrusive technologies for the in-situ measurement of river morphological features are increasingly popular in the scientific and practice communities due to their efficient and productive data acquisition. While the measurement of suspended load with optical and acoustic technologies is currently an active area of research, the measurement of bedform dynamics has not experienced similar progress. We have successfully demonstrated through laboratory experiments that, by combining acoustic mapping with image velocimetry concepts, we can characterize the planar dynamics of the bedform migration. The technique, labeled Acoustic Mapping Velocimetry (AMV), is currently transferred to field conditions using multiple-beam echo-sounders (MBES) for producing acoustic maps. During this transfer, new questions emerged because, in field conditions, many of the morphologic features targeted by AMV measurements are not a priori known. Moreover, the image velocimetry processing can be approached with several alternatives, each of them characterized by strength and limitations. This paper assembles guidelines for establishing optimal parameters for the acquisition of the acoustic maps based on analytical considerations, and for selecting essential features of the processing for image velocimetry. We test these guidelines using MBES data acquired in the Mississippi River.

scholarly journals Validation of numerical methods for flow patterns modeling based on comparison with the results of laboratory experiments using visualization methods

2019 ◽  
Vol 213 ◽  
pp. 02072
Author(s):  
Daniil Sergeev ◽  
Alexander Kandaurov ◽  
Olga Ermakova ◽  
Anatoly Suvorov
Keyword(s):  
Laboratory Experiments ◽  
Three Dimensional ◽  
Numerical Differentiation ◽  
Optimal Parameters ◽  
Physical Processes ◽  
Ansys Cfx ◽  
Image Velocimetry ◽  
Rectangular Obstacle ◽  
High Reynolds ◽  
Calculation Grid

A series of laboratory and numerical experiments were carried out to study the structure of the turbulent flow over a rectangular obstacle for high Reynolds number. The results of numerical simulation performed within ANSYS CFX were verified on data obtained in the wind tunnel of IAP RAS by visualization methods including Particle Image Velocimetry. It was found that the airflow over the obstacle can be conditionally divided into main several regions: the region of the initiation of the detachment and formation shielding zone, the region of the maximum vertical separation and vortex development and the region of flow reattachment. Comparison of numerical calculations with the results of experiments showed that the physical processes of the airflow around model objects can be optimally modeled in a three-dimensional setting using the Detached Eddy turbulence model (DES) with central numerical differentiation scheme and allowed to select optimal parameters of calculation grid.

scholarly journals Listener-Position and Orientation Dependency of Auditory Perception in an Enclosed Space: Elicitation of Salient Attributes

2021 ◽  
Vol 11 (4) ◽  
pp. 1570
Author(s):  
Bogdan Ioan Băcilă ◽  
Hyunkook Lee
Keyword(s):  
Auditory Perception ◽  
Laboratory Experiments ◽  
Head Orientation ◽  
Repertory Grid Technique ◽  
Apparent Source ◽  
Grid Technique ◽  
Subjective Study ◽  
Enclosed Space ◽  
Orientation Dependency

This paper presents a subjective study conducted on the perception of auditory attributes depending on listener position and head orientation in an enclosed space. Two elicitation experiments were carried out using the repertory grid technique—in-situ and laboratory experiments—which aimed to identify perceptual attributes among 10 different combinations of the listener’s positions and head orientations in a concert hall. It was found that, between the in-situ and laboratory experiments, the listening positions and head orientations were clustered identically. Ten salient perceptual attributes were identified from the data obtained from the laboratory experiment. Whilst these included conventional attributes such as ASW (apparent source width) and LEV (listener envelopment), new attributes such as PRL (perceived reverb loudness), ARW (apparent reverb width) and Reverb Direction were identified, and they are hypothesised to be sub-attributes of LEV (listener envelopment). Timbral characteristics such as Reverb Brightness and Echo Brightness were also identified as salient attributes, which are considered to potentially contribute to the overall perceived clarity.

scholarly journals Natural dimethyl sulfide gradients would lead marine predators to higher prey biomass

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Kylie Owen ◽  
Kentaro Saeki ◽  
Joseph D. Warren ◽  
Alessandro Bocconcelli ◽  
David N. Wiley ◽  
...  
Keyword(s):  
Laboratory Experiments ◽  
Dimethyl Sulfide ◽  
Zooplankton Biomass ◽  
Foraging Success ◽  
Spatially Correlated ◽  
Prey Biomass ◽  
Marine Predators ◽  
Predator Foraging ◽  
The Impact

AbstractFinding prey is essential to survival, with marine predators hypothesised to track chemicals such as dimethyl sulfide (DMS) while foraging. Many predators are attracted to artificially released DMS, and laboratory experiments have shown that zooplankton grazing on phytoplankton accelerates DMS release. However, whether natural DMS concentrations are useful for predators and correlated to areas of high prey biomass remains a fundamental knowledge gap. Here, we used concurrent hydroacoustic surveys and in situ DMS measurements to present evidence that zooplankton biomass is spatially correlated to natural DMS concentration in air and seawater. Using agent simulations, we also show that following gradients of DMS would lead zooplankton predators to areas of higher prey biomass than swimming randomly. Further understanding of the conditions and scales over which these gradients occur, and how they are used by predators, is essential to predicting the impact of future changes in the ocean on predator foraging success.

scholarly journals Assessment of the Accuracy of a Multi-Beam LED Scanner Sensor for Measuring Olive Canopies

Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4406 ◽  
Author(s):  
Rafael Sola-Guirado ◽  
Sergio Bayano-Tejero ◽  
Antonio Rodríguez-Lizana ◽  
Jesús Gil-Ribes ◽  
Antonio Miranda-Fuentes
Keyword(s):  
Laboratory Test ◽  
Real Time ◽  
Relative Error ◽  
Laser Scanner ◽  
Field Tests ◽  
High Accuracy ◽  
Field Conditions ◽  
Canopy Trees ◽  
Canopy Volume

Canopy characterization has become important when trying to optimize any kind of agricultural operation in high-growing crops, such as olive. Many sensors and techniques have reported satisfactory results in these approaches and in this work a 2D laser scanner was explored for measuring canopy trees in real-time conditions. The sensor was tested in both laboratory and field conditions to check its accuracy, its cone width, and its ability to characterize olive canopies in situ. The sensor was mounted on a mast and tested in laboratory conditions to check: (i) its accuracy at different measurement distances; (ii) its measurement cone width with different reflectivity targets; and (iii) the influence of the target’s density on its accuracy. The field tests involved both isolated and hedgerow orchards, in which the measurements were taken manually and with the sensor. The canopy volume was estimated with a methodology consisting of revolving or extruding the canopy contour. The sensor showed high accuracy in the laboratory test, except for the measurements performed at 1.0 m distance, with 60 mm error (6%). Otherwise, error remained below 20 mm (1% relative error). The cone width depended on the target reflectivity. The accuracy decreased with the target density.

scholarly journals A guided approach for subtomogram averaging of challenging macromolecular assemblies

2020 ◽  
Author(s):  
Danielle Grotjahn ◽  
Saikat Chowdhury ◽  
Gabriel C. Lander
Keyword(s):  
Electron Tomography ◽  
A Priori ◽  
Three Dimensional ◽  
Structural Heterogeneity ◽  
Dimensional Structure ◽  
Diverse Range ◽  
Macromolecular Assemblies ◽  
Cryo Electron Tomography ◽  
Subtomogram Averaging

AbstractCryo-electron tomography is a powerful biophysical technique enabling three-dimensional visualization of complex biological systems. Macromolecular targets of interest identified within cryo-tomograms can be computationally extracted, aligned, and averaged to produce a better-resolved structure through a process called subtomogram averaging (STA). However, accurate alignment of macromolecular machines that exhibit extreme structural heterogeneity and conformational flexibility remains a significant challenge with conventional STA approaches. To expand the applicability of STA to a broader range of pleomorphic complexes, we developed a user-guided, focused refinement approach that can be incorporated into the standard STA workflow to facilitate the robust alignment of particularly challenging samples. We demonstrate that it is possible to align visually recognizable portions of multi-subunit complexes by providing a priori information regarding their relative orientations within cryo-tomograms, and describe how this strategy was applied to successfully elucidate the first three-dimensional structure of the dynein-dynactin motor protein complex bound to microtubules. Our approach expands the application of STA for solving a more diverse range of heterogeneous biological structures, and establishes a conceptual framework for the development of automated strategies to deconvolve the complexity of crowded cellular environments and improve in situ structure determination technologies.

scholarly journals U–Pb geochronology of epidote by LA–ICP–MS as a tool for dating hydrothermal-vein formation

2020 ◽  
Author(s):  
Veronica Peverelli ◽  
Tanya Ewing ◽  
Daniela Rubatto ◽  
Martin Wille ◽  
Alfons Berger ◽  
...  
Keyword(s):  
Inductively Coupled Plasma ◽  
A Priori ◽  
Swiss Alps ◽  
Hydrothermal Vein ◽  
Isotopic Compositions ◽  
Vein Formation ◽  
Icp Ms ◽  
Wide Range ◽  
Primary Reference

Abstract. Monoclinic epidote is a low-µ (µ = 283U / 204Pb) mineral occurring in a variety of geological environments, participating in many metamorphic reactions and stable throughout a wide range of pressure–temperature conditions. Despite containing fair amounts of U, its use as a U–Pb geochronometer has been hindered by the commonly high contents of initial Pb with isotopic compositions that cannot be assumed a priori. We present U–Pb geochronology of hydrothermal-vein epidote spanning a wide range of Pb (3.9–190 µg g−1), Th (0.009–38 µg g−1) and U (2.6–530 µg g−1) contents and with µ values between 7–510 from the Albula area (eastern Swiss Alps), from the Grimsel area (central Swiss Alps) and from the Heyuan fault (Guangdong province, China). The investigated epidote samples show appreciable fractions of initial Pb that vary to different extents. A protocol has been developed for in situ U–Pb dating of epidote by spot-analysis laser ablation inductively coupled plasma mass spectrometry (LA–ICP–MS) with a magmatic allanite as primary reference material. The suitability of the protocol and the reliability of the measured isotopic ratios have been ascertained by independent measurements of 238U / 206Pb and 207Pb / 206Pb ratios respectively by quadrupole and multicollector ICP–MS applied to epidote micro-separates digested and diluted in acids. For age calculation, we used the Tera–Wasserburg (207Pb / 206Pb–238U / 206Pb) diagram, which does not require corrections for initial Pb and provides the initial 207Pb / 206Pb ratio if all intra-sample analyses are co-genetic. Petrographic and microstructural data indicate that the calculated ages date the crystallization of vein epidote from a hydrothermal fluid and that the U–Pb system was not reset to younger ages by later events. Vein epidote from the Albula area formed in the Paleocene (62.7 ± 3.0 Ma) and is related to Alpine greenschist-facies metamorphism. The Miocene (19.1 ± 4.0 Ma and 16.9 ± 3.7 Ma) epidote veins from the Grimsel area formed during the Handegg phase (22–17 Ma) of the Alpine evolution of the Aar Massif. Identical initial 207Pb / 206Pb ratios reveal homogeneity in Pb isotopic compositions of the fluid across ca. 200 m. Vein epidote from the Heyuan fault is Cretaceous in age (108.1 ± 8.4 Ma) and formed during the early movements of the fault. In situ U–Pb analyses of epidote returned reliable ages of otherwise undatable epidote-quartz veins. The Tera–Wasserburg approach has proven pivotal for in situ U–Pb dating of epidote and the decisive aspect for low age uncertainties is the variability in intra-sample initial Pb fractions.

Analysis of the World's First Polymer Injectivity Test in a Carbonate Reservoir Under Extreme Harsh Conditions in ADNOC's Reservoirs

2021 ◽  
Author(s):  
Juan Manuel Leon ◽  
Shehadeh K. Masalmeh ◽  
Siqing Xu ◽  
Ali M. AlSumaiti ◽  
Ahmed A. BinAmro ◽  
...  
Keyword(s):  
High Temperature ◽  
Laboratory Experiments ◽  
High Salinity ◽  
Laboratory Data ◽  
Injection Pressure ◽  
Carbonate Reservoir ◽  
Experimental Program ◽  
Full Field ◽  
Harsh Conditions

Abstract Assessing polymer injectivity for EOR field applications is highly important and challenging. An excessive injectivity reduction during and after polymer injection may potentially affect the well integrity and recovery efficiency and consequently, injection strategy and the economics of the polymer projects. Moreover, well conditions such as skin, completion configuration, and injection water quality can significantly impact polymer injectivity. Additionally, the presence of fractures or micro-fractures may govern injection pressure. In contrast, historic field applications have shown that polymer injectivity is in general better than expected from simulations or laboratory data. In the laboratory experiments, the polymer injectivity has been evaluated by injection of significant amounts of pore volumes of polymer at relevant well-injection rates. In addition, several experiments were performed to measure the complex in-situ rheology expected to dominate the flow near the wellbore This paper presents the analysis of the the world's first polymer injectivity test (PIT) conducted in a high temperature and high salinity (HTHS) carbonate reservoir in Abu Dhabi as part of a comprehensive de-risking program for a new polymer-based EOR scheme proposed by ADNOC for these challenging carbonate reservoirs (see Masalmeh et. al., 2014). The de-risking program includes an extensive laboratory experimental program and field injectivity test to ensure that the identified polymer can be injected and propagated in the target formation before multi-well pilot and full-field implementation stages. Experimental laboratory data and the field injectivity test results are presented in earlier publications (Masalmeh et. al., 2019; Rachapudi et. al., 2020) and references therein. This PIT is the world's first polymer injectivity test in a carbonate reservoir under such harsh conditions of high salinity, high content of divalent ions and high temperature. In addition, the polymer used during the test has never been field-tested before. Therefore, the results of the PIT interpretation will help to de-risk the suitable polymer for the future inter-well pilot for the new proposed EOR Polymer-based scheme and it is a game-changer to unlock several opportunities for different Chemical EOR applications on full-field scale in other reservoirs with similar characteristics. A single well radial simulation model was built to integrate the surveillance data during PIT and the extensive laboratory experiments. Morever, multiple Pressure Fall Off Tests (PFOs) during the same periods were analyzed and intergaretd in the model.The study assessed the effect of polymer viscosity on mobility reduction, evaluated the polymer bank propagation, investigated the effect of the skin build-up, residual resistance factor (RRF) and shear effects on the well injectivity. Additionally, a comprehensive assisted history match method and robust simulation sensitivity analysis was implemented, thousands of sensitivity simulation runs were performed to capture several possible injection scenarios and validate laboratory parameters. The simulation study confirmed that the PIT could be interpreted using the laboratory-measured polymer parameters such as polymer bulk viscosity, in-situ rheology, RRF and adsorption.

Sign in / Sign up

Export Citation Format

Share Document