Dielectric Engineering to Suppress Cell-to-Cell Programming Voltage Interference in 3D NAND Flash Memory

In contrast to conventional 2-dimensional (2D) NAND flash memory, in 3D NAND flash memory, cell-to-cell interference stemming from parasitic capacitance between the word-lines (WLs) is difficult to control because the number of WLs, achieved for better packing density, have been dramatically increased under limited height of NAND string. In this context, finding a novel approach based on dielectric engineering seems timely and applicable. This paper covers the voltage interference characteristics in 3D NAND with respect to dielectrics, then proposes an alternative cell structure to suppress such interference.

Design of vertical fisherman village in Penjaringan with sustainable development concept

Indonesia is known as an archipelago state that has more than 17,000 islands with a coastline of more than 81,000 kilometers. Therefore, the economic life of the Indonesian nation is largely centered on the coastal areas. Population growth along the coastline has resulted in fishermen choosing to live close to their source of life and building their economy there. Rapid population growth, and the scarcity of available residential land resulted in fishermen building denser settlements, expanding towards the sea and ultimately giving the impression of slums along the coast. It is felt that vertical settlements (flats) will provide solutions to problems in the conditions of these slum settlements. The effort to rejuvenate the fishing village in Penjaringan Village is the topic of this research with the limited vertical settlement approach, which takes into account: behavior patterns, habits, activities and daily needs of fishermen. A vertical development with a limited height is also seen as fulfilling the concept of sustainable development, where all fishing activities can be accommodated on a narrow area of land and do not sacrifice too much open land which is already small in the coastal area. In addition, fishermen’s life and cooperation between them can be facilitated by carrying out a compact upward design. This is one solution that will differentiate this fishing village from other settlements. This development is declared successful if all the goals that have been set together can be achieved and bring benefits to the group of residents.

Technique of neo-pharynx reconstruction with supra-clavicular artery island flap in a case of pharyngeal stricture

<p class="abstract">Pharyngeal stenosis frequently occurs after laryngectomy or laryngo-pharyngectomy, more commonly in patients complicated with a post-operative pharyngo-cutaneous fistula. Oral feeding becomes challenging, restricted to liquids. In such cases, dilatations can be futile if there is a complete stricture necessiating surgery. We present a case of 72 -year-old man who underwent total laryngectomy with partial pharyngectomy with pectoral major myocutaneous flap reconstruction for second primary of hypopharyngeal T3N0M0, after primary laryngeal T1N0M0 treated with RT presented with nearly 4 cm pharyngeal stricture causing him absolute dysphagia. Multiple dilations failed to create adequate passage, pharyngeal stricture was then excised, and a neopharynx was constructed with supraclavicular artery island flap. The outcome was uneventful with restoration of normal pharyngeal permeability and swallowing by 12^th post-operative day. Post-operative follow-up after 8 months remained satisfactory. Resection of limited height pharyngeal stenosis can be successfully performed as end-to-end anastomosis whereas reconstruction of a long segment pharyngeal stricture utilizing a loco-regional flap gives satisfactory outcome.</p>

A Comparative Analysis of Aerosol Optical Coefficients and Their Associated Errors Retrieved from Pure-Rotational and Vibro-Rotational Raman Lidar Signals

This paper aims to quantify the improvement obtained with a purely rotational Raman (PRR) channel over a vibro-rotational Raman (VRR) channel, used in an aerosol lidar with elastic and Raman channels, in terms of signal-to-noise ratio (SNR), effective vertical resolution, and absolute and relative uncertainties associated to the retrieved aerosol optical (extinction and backscatter) coefficients. Measurements were made with the European Aerosol Research Lidar Network/Universitat Politècnica de Catalunya (EARLINET/UPC) multi-wavelength lidar system enabling a PRR channel at 353.9 nm, together with an already existing VRR (386.7 nm) and an elastic (354.7 nm) channels. Inversions were performed with the EARLINET Single Calculus Chain (SCC). When using PRR instead of VRR, the measurements show a gain in SNR of a factor 2.8 and about 7.6 for 3-h nighttime and daytime measurements, respectively. For 3-h nighttime (daytime) measurements the effective vertical resolution is reduced by 17% (20%), the absolute uncertainty (associated to the extinction) is divided by 2 (10) and the relative uncertainty is divided by 3 (7). During daytime, VRR extinction coefficient is retrieved in a limited height range (<2.2 km) preventing the SCC from finding a suitable calibration range in the search height range. So the advantage of using PRR instead of VRR is particularly evidenced in daytime conditions. For nighttime measurements, decreasing the time resolution from 3 to 1 h has nearly no effect on the relative performances of PRR vs. VRR.

Determination of Planetary Boundary Layer height with Lidar Signals Using Maximum Limited Height Initialization and Range Restriction (MLHI-RR)

The planetary boundary layer height (PBLH) is a vital parameter to characterize the surface convection, which determines the diffusion of air pollutants. The accurate inversion of PBLH is extremely important for the study of aerosol concentrations, in order to predict air quality and provide weather forecast. Aerosol lidar, a powerful remote sensing instrument for detecting the characteristics of atmospheric temporal and spatial evolution, can continuously retrieve the planetary boundary layer (PBL) and obtain high resolution measurements. However, multi-layer conditions, including one or more layers of aerosol, or cloud above the PBL, can seriously interfere the accuracy of PBLH determined by lidar. A new technique of maximum limited height initialization and range restriction (MLHI-RR) is proposed to eliminate the impact of multi-layer conditions on PBLH determination. Four widely used methods for deriving PBLH are utilized, in addition to the MLHI-RR constraint. Comparisons demonstrate that the proposed technique can determine the PBLH in multi-layer conditions with higher accuracy. The proposed technique requires no affiliate information besides lidar signals, which provide a convenient method for PBLH determination under complicated conditions.

Two new endemic species of Monstera (Araceae: Monsteroideae: Monstereae) from Golfito in southern Costa Rica

Monstera croatii M.Cedeño & A.Hay and M. gambensis M.Cedeño & M.A.Blanco (Araceae: Monsteroideae: Monstereae) are newly described and illustrated from cantón Golfito in the Pacific lowlands of southern Costa Rica. Notes are provided on how they can be differentiated from similar species. Monstera croatii is unique in the genus because it reaches its adult vegetative morphology while growing as a terrestrial plant on the forest floor, and climbs only to a very limited height before flowering. Monstera gambensis is one of the smallest species in the genus.

A Comparative Study on the Perception of Dental Esthetics of Laypersons and Dental Students

Introduction: Esthetic dentistry aims to create a harmonious smile that is well integrated with the facial architecture of the patient. A good understanding of the patient’s esthetic perception is important when designing a smile.Materials and methods: 106 subjects, 51 patients 54 dental students took part in the study. Each subject was asked to evaluate 10 pictures showing frontal aspect of real cases. They were asked to rate the aesthetics of the clinical cases on a scale from 1 to 5. An open question was associated with each picture, where the subjects were asked to describe what they like and what they do not like about the picture.Results and discussions: The overall mean esthetic rating of dental students was 2,68, while the laypersons’ rating was 2,98. Crowded teeth are more often criticized by patients, while dental students consider that slight crowding give a more natural appearance and individualize the teeth. The presence of diastema is observed by dental students even when it is discrete. The discrepancy between maxillary and mandibular dental midline is more easily observed by dental students. Discolored teeth lead to low aesthetic scores for both groups of subjects. Dental students gave lower esthetic scores to restorations with uniform colour, while laypersons appreciate white restorations. The limited height of papillae is considered unattractive by dental students, while laypersons hardly notice this aspect.Conclusions: This study showed several differences in the aesthetic perception of dental students and laypersons. Students were generally more critical and gave lower scores than laypersons. They also observed and criticized more aspects regarding the smile.

Learning (from) Deep Hierarchical Structure among Features

Data features usually can be organized in a hierarchical structure to reflect the relations among them. Most of previous studies that utilize the hierarchical structure to help improve the performance of supervised learning tasks can only handle the structure of a limited height such as 2. In this paper, we propose a Deep Hierarchical Structure (DHS) method to handle the hierarchical structure of an arbitrary height with a convex objective function. The DHS method relies on the exponents of the edge weights in the hierarchical structure but the exponents need to be given by users or set to be identical by default, which may be suboptimal. Based on the DHS method, we propose a variant to learn the exponents from data. Moreover, we consider a case where even the hierarchical structure is not available. Based on the DHS method, we propose a Learning Deep Hierarchical Structure (LDHS) method which can learn the hierarchical structure via a generalized fused-Lasso regularizer and a proposed sequential constraint. All the optimization problems are solved by proximal methods where each subproblem has an efficient solution. Experiments on synthetic and real-world datasets show the effectiveness of the proposed methods.

February 2017 extreme Saharan dust outbreak in the Iberian Peninsula: from lidar-derived optical properties to evaluation of forecast models

An unprecedented extreme Saharan dust event was registered in winter time from 20 to 23 February 2017 over the Iberian Peninsula (IP). We report on aerosol optical properties observed under this extreme dust outbreak through remote sensing (active and passive) techniques. For that, EARLINET (European Aerosol Research LIdar NETwork) lidar and AERONET (AErosol RObotic NETwork) Sun-photometer Cimel CE 318 measurements are used. The sites considered are: Barcelona (41.38º N, 2.17º E), Burjassot (39.51º N, 0.42º W), Cabo da Roca (38.78º N, 9.50º W), Évora (38.57º N, 7.91º W), Granada (37.16º N, 3.61º W) and Madrid (40.45º N, 3.72º W). In general, large aerosol optical depths (AOD) and low Ångström exponents (AE) are observed. An AOD of 2.0 at 675 nm is reached in several stations. Maximum values of AOD675 of 2.5 are registered in Évora. During and around the peak of AOD675, AEs close to 0 are measured. With regard to vertically-resolved aerosol optical properties, particle backscatter coefficients as high as 1.5∙10−5 m−1 sr−1 at 355 nm are recorded at every lidar stations. Mean lidar ratios are found in the range 40–55 sr at 355 nm and 34–61 sr at 532 nm during the event inside the dust layer. Mean particle and volume depolarization ratios are found to be very consistent between lidar stations. They range 0.19–0.31 and 0.12–0.26 respectively. The optical properties are also found very stable with height in the dust layer. Another remarkable aspect of the event is the limited height of the dust transport which is found between the ground and 5 km. Our vertically-resolved aerosol properties are also used to estimate the performances of two dust models, namely BSC-DREAM8b and NMMB/BSC-Dust, in order to evaluate their forecast skills in such intense dust outbreaks. We found that forecasts provided by the NMMB/BSC-Dust show a better agreement with observations than the ones from BSC-DREAM8b. The BSC-DREAM8b forecasts (24 h) present a large underestimation during the event. No clear degradation of the prognostics is appreciated in 24, 48, 72 h except for the Barcelona station.