scholarly journals Influence of friction stir process parameters on surface quality of aluminum alloy A2017

2017 ◽  
Vol 94 ◽  
pp. 02006 ◽  
Author(s):  
Cecile Langlade ◽  
Adriana Roman ◽  
Daniel Schlegel ◽  
Eric Gete ◽  
Patrice Noel ◽  
...  
Keyword(s):  
Aluminum Alloy ◽  
Surface Quality ◽  
Process Parameters ◽  
Friction Stir Process ◽  
Friction Stir

scholarly journals Experimental Analysis and Optimization to Maximize Ultimate Tensile Strength and Ultimate Elongation of Friction Stir Welded AA6082 Aluminum Alloy

Metals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 69
Author(s):  
Michela Simoncini ◽  
Antonio Costa ◽  
Sergio Fichera ◽  
Archimede Forcellese
Keyword(s):  
Tensile Strength ◽  
Aluminum Alloy ◽  
Ultimate Tensile Strength ◽  
Process Parameters ◽  
Experimental Tests ◽  
Welding Parameters ◽  
Friction Stir ◽  
Ultimate Elongation ◽  
Welding Processes

Friction stir welding (FSW) is a well-established welding technique, which allows joining abutting surfaces by generating heating through a rotating and translating tool specifically shaped. Differently from the conventional techniques, continuous welding processes can be executed by FSW, thus supporting the economy of scales objectives. This paper deals with the selection of the optimal process parameters for the FSW of the AA6082 aluminum alloy. Three welding parameters, namely tool plunging, rotational speed and welding speed, have been handled as independent variables for developing two mathematical models by means of a non-linear regression-based approach, with the aim of predicting both ultimate tensile strength and ultimate elongation of the welded joints. A set of additional experimental tests has been used to validate the mentioned metamodels and finally three different metaheuristic algorithms have been implemented for selecting the best process parameters able to maximize the aforementioned mechanical properties. A comparison analysis based on further experimental tests confirmed the accuracy of the predicting metamodels and the quality of solutions yielded by the proposed optimization approaches.

scholarly journals Study on the Influence of Surface Temperature Field of Aluminum Alloy Etched by Laser Water Jet Composite Machining

Materials ◽  
2020 ◽  
Vol 13 (14) ◽  
pp. 3206
Author(s):  
Xuehui Chen ◽  
Xin Xu ◽  
Wei Liu ◽  
Lei Huang ◽  
Hao Li ◽  
...  
Keyword(s):  
Aluminum Alloy ◽  
Temperature Field ◽  
Surface Temperature ◽  
Process Parameters ◽  
Water Jet ◽  
Laser Machining ◽  
Material Surface ◽  
Laser Etching ◽  
Surface Temperature Field

This paper studies the compound effect of liquid medium and laser on the workpiece and analyses the law of material surface temperature change during the processing. Taking 7075-T6 aluminum alloy as the research object, the surface temperature field of aluminum alloy processed using water-jet-assisted laser machining under different process parameters was simulated using finite element software. In addition, the temperature field of the material surface was detected in real-time using the self-built water-jet-assisted laser machining temperature field detection system, and the processing results were observed and verified using an optical microscope, scanning electron microscope, and energy spectrum analyzer. The results show that when the water jet inflow angle is 45°, the heat-affected area of the material surface is the smallest, and the cooling effect of the temperature field of the material surface is better. Considering the liquidus melting point of 7075 aluminum alloys, it is concluded that the processing effect is better when the water jet velocity is 14 m·s−1, the laser power is 100 W, and the laser scanning speed is 1.2 mm·s−1. At this time, the quality of the tank is relatively good, there are no cracks in the bottom of the tank, and there is less slag accumulation. Compared with anhydrous laser etching, water-jet-assisted laser etching can reduce the problems of micro-cracks, molten slag, and the formation of a recast layer in laser etching and improve the quality of the workpiece, and the composition of the bottom slag does not change. This study provides theoretical guidance and application support for the selection and optimization of process parameters for water-jet-assisted laser etching of aluminum alloy and further enriches the heat transfer mechanism of multi-field coupling in the process of water-jet-assisted laser machining.

scholarly journals Effect of process parameters on longitudinal weld seam quality of aluminum alloy profile for an automobile fuel tank protector

2020 ◽  
Vol 50 ◽  
pp. 159-167
Author(s):  
Wenlin Chen ◽  
Chen Xu ◽  
Penglin Pan ◽  
Xiangming Ruan ◽  
Hongxuan Ji
Keyword(s):  
Aluminum Alloy ◽  
Process Parameters ◽  
Weld Seam ◽  
Fuel Tank ◽  
Longitudinal Weld Seam

The mechanism of process parameters influencing the AlSi10Mg side surface quality fabricated via laser powder bed fusion

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Shimin Dai ◽  
Hailong Liao ◽  
Haihong Zhu ◽  
Xiaoyan Zeng
Keyword(s):  
Surface Roughness ◽  
Surface Quality ◽  
Process Parameters ◽  
Laser Power ◽  
Side Surface ◽  
Laser Powder Bed Fusion ◽  
Scanning Velocity ◽  
Content Type ◽  
Powder Bed

Purpose For the laser powder bed fusion (L-PBF) technology, the side surface quality is essentially important for industrial applicated parts, such as the inner flow parts. Contour is generally adopted at the parts’ outline to enhance the side surface quality. However, the side surface roughness (Ra) is still larger than 10 microns even with contour in previous studies. The purpose of this paper is to study the influence of contour process parameters, laser power and scanning velocity on the side surface quality of the AlSi10Mg sample. Design/methodology/approach Using L-PBF technology to manufacture AlSi10Mg samples under different contour process parameters, use a laser confocal microscope to capture the surface information of the samples, and obtain the surface roughness Ra and the maximum surface height Rz of each sample after analysis and processing. Findings The results show that the side surface roughness decreases with the increase of the laser power at the fixed scanning velocity of 1,000 mm/s, the side surface roughness Ra stays within the error range as the contour velocity increases. It is found that the Ra increases with the scanning velocity increasing and the greater the laser power with the greater Ra increases when the laser power of contour process parameters is 300 W, 350 W and 400 W. The Rz maintain growth with the contour scanning velocity increasing at constant laser power. The continuous uniform contour covers the pores in the molten pool of the sample edge and thus increase the density of the sample. Two mechanisms named “Active adhesion” and “Passive adhesion” cause sticky powder. Originality/value Formation of a uniform and even contour track is key to obtain the good side surface quality. The side surface quality is determined by the uniformity and stability of the contour track when the layer thickness is fixed. These research results can provide helpful guidance to improve the surface quality of L-PBF manufactured parts.

Ultraschallüberlagertes Trennschleifen von Faserverbundwerkstoffen*/Ultrasound abrasive cutting of fiber composites - Survey on the potential and mode of action

2016 ◽  
Vol 106 (01-02) ◽  
pp. 39-43
Author(s):  
Y. Babenko ◽  
T. Mayer ◽  
A. Gebhardt
Keyword(s):  
Surface Quality ◽  
Process Parameters ◽  
Mode Of Action ◽  
Fiber Composites ◽  
Cutting Process ◽  
Force Analysis ◽  
Abrasive Cutting

Dieser Fachartikel befasst sich mit der Untersuchung des Potentials der Ultraschallüberlagerung beim Trennschleifen moderner Faserverbundwerkstoffe. Es wurde eine Zerspankraftanalyse des Trennschleifprozesses am CFK-Werkstück mit variierenden Prozessparametern durchgeführt. Zudem wurden die Oberflächenqualitäten der Schnittkanten betrachtet.   The presented study describes the investigation of the potential of ultrasound abrasive cutting of modern fiber composites. A force analysis of the abrasive cutting process of CFRP was conducted, while the process parameters were varied. In addition, the surface quality of the machined workpieces was observed.

Effect of material properties and process parameters on quality of friction stir forming

2021 ◽  
Vol 70 ◽  
pp. 553-559
Author(s):  
Francesco Gagliardi ◽  
Mahsa Navidirad ◽  
Giuseppina Ambrogio ◽  
Wojciech Z. Misiolek
Keyword(s):  
Process Parameters ◽  
Material Properties ◽  
Friction Stir
Sign in / Sign up

Export Citation Format

Share Document