scholarly journals Lightweight geopolymer composites as structural elements with improved insulation capacity

2018 ◽  
Vol 149 ◽  
pp. 01042 ◽  
Author(s):  
Glikeria Kakali ◽  
Dimitris Kioupis ◽  
Aggeliki Skaropoulou ◽  
Sotiris Tsivilis
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Lightweight Concrete ◽  
Construction Materials ◽  
Expanded Polystyrene ◽  
Structural Elements ◽  
Cement Mortars ◽  
Mechanical Strengths ◽  
Geopolymer Composites ◽  
Excellent Stability

This study concerns the development of lightweight fly ash based geopolymers which can be applied as alternatives to the traditional lightweight concrete. Different kinds of expanded polystyrene were used as lightweight agents. The results showed that lightweight geopolymers were successfully prepared, exhibiting compressive strength and density in the range 7.70 – 29.57 MPa and 0.97 – 1.57 g/cm3, respectively. The product containing 3% w/w of commercial expanded polystyrene possesses low thermal conductivity (0.16 W/mK) combined with sufficient mechanical strengths (11 MPa), excellent stability and fire resistance while its water absorption is comparable to that of conventional construction materials (cement mortars, concrete).

scholarly journals Predicting Performance of Lightweight Concrete with Granulated Expanded Glass and Ash Aggregate by Means of Using Artificial Neural Networks

Materials ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 2002 ◽  
Author(s):  
Marzena Kurpinska ◽  
Leszek Kułak
Keyword(s):  
Thermal Conductivity ◽  
Neural Networks ◽  
Compressive Strength ◽  
Artificial Neural Networks ◽  
Lightweight Concrete ◽  
Construction Materials ◽  
Test Methods ◽  
Predicting Performance ◽  
Artificial Neural ◽  
Reduction Of Co2

Lightweight concrete (LWC) is a group of cement composites of the defined physical, mechanical, and chemical performance. The methods of designing the composition of LWC with the assumed density and compressive strength are used most commonly. The purpose of using LWC is the reduction of the structure’s weight, as well as the reduction of thermal conductivity index. The highest possible strength, durability and low thermal conductivity of construction materials are important factors and reasons for this field’s development, which lies largely in modification of materials’ composition. Higher requirements for construction materials are related to activities aiming at environment protection. The purpose of the restrictions is the reduction of energy consumption and, as a result, the reduction of CO2 emission. To limit the scope of time-consuming and often high-cost laboratory works necessary to calibrate models used in the test methods, it is possible to apply Artificial Neural Networks (ANN) to predict any of the concrete properties. The aim of this study is to demonstrate the applicability of this tool for solving the problems, related to establishing the relation between the choice of type and quantity of lightweight aggregates and the porosity, bulk density and compressive strength of LWC. For the tests porous lightweight Granulated Expanded Glass Aggregate (GEGA) and Granulated Ash Aggregate (GAA) have been used.

Lightweight Concrete Precast Panels for the Improvement of Thermal Insulation of Housing with Expanded Polystyrene Beads

2021 ◽  
Vol 1033 ◽  
pp. 163-171
Author(s):  
Alexandra Reto ◽  
Renzo Sanabria ◽  
José Rodriguez ◽  
Alexandra Hinostroza
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Insulation ◽  
Lightweight Concrete ◽  
Linear Trend ◽  
Precast Concrete ◽  
Expanded Polystyrene ◽  
Dry Density ◽  
Conventional Concrete ◽  
Polystyrene Beads

The precast concrete elements in the construction of buildings are increasingly used due to their better quality control, constructive speed, reduction of the number of workers and less waste of resources compared to conventional construction; for wall applications, to these advantages, the design to ensure thermal comfort requires the improvement of the low thermal insulation of conventional concrete panels. The use of materials with lower thermal conductivity such as Expanded PolyStyrene Beads (EPSB) in lightweight concrete for the construction of precast panels in housing, contributes to improve thermal insulation and the saving operational energy during its operation phase, because the aggregate has a small size, low density and thermal conductivity; applied in higher volumes in concrete, reduces indoor heat loss in cold climates and indoor heat gain in warm climates in housing. The purpose of this research is to study the behavior of lightweight concrete with EPSB for 16%, 26% and 36% addition and evaluate the air-dry density, compressive strength, thermal conductivity, relationship between air-dry density with compressive strength and thermal conductivity. The results indicate that the higher the percentage of EPSB the air-dry density, compressive strength and thermal conductivity decrease; the relationships between air-dry density with compressive strength and thermal conductivity follow a linear trend and are similar.

Incorporation of Iraqi Rocks in the Production of Eco-Friendly Cement Mortar

2020 ◽  
Vol 38 (10A) ◽  
pp. 1522-1530
Author(s):  
Rawnaq S. Mahdi ◽  
Aseel B. AL-Zubidi ◽  
Hassan N. Hashim
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Compressive Strength ◽  
Water Absorption ◽  
Structural Properties ◽  
Mechanical Milling ◽  
Cement Mortar ◽  
Cement Mortars

This work reports on the incorporation of Flint and Kaolin rocks powders in the cement mortar in an attempt to improve its mechanical properties and produce an eco-friendly mortar. Flint and Kaolin powders are prepared by dry mechanical milling. The two powders are added separately to the mortars substituting cement partially. The two powders are found to improve the mechanical properties of the mortars. Hardness and compressive strength are found to increase with the increase of powders constituents in the cement mortars. In addition, the two powders affect water absorption and thermal conductivity of the mortar specimens which are desirable for construction applications. Kaolin is found to have a greater effect on the mechanical properties, water absorption, and thermal conductivity of the mortars than Flint. This behavior is discussed and analyzed based on the compositional and structural properties of the rocks powders.

Effects of Loading Percentage of Polyurethane in Lightweight Concrete

2013 ◽  
Vol 357-360 ◽  
pp. 1082-1085 ◽  
Author(s):  
Kamarul Aini Mohd Sari ◽  
Sohif Mat ◽  
Khairiah Haji Badri ◽  
Muhammad Fauzi Mohd Zain
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Lightweight Concrete ◽  
Palm Kernel ◽  
Physical And Mechanical Properties ◽  
Concrete Mixture ◽  
Experimental Program ◽  
Polymer Concrete ◽  
Optimum Level ◽  
Methylene Diphenyl Diisocyanate

An experimental program was performed to obtain the density, compressive strength, and thermal conductivity of palm-based lightweight concrete. Palm-based polyurethane (PU) particles were used as lightweight aggregates in creating concrete systems. Concrete systems contain palm kernel oil-based polyol (PKO-p) reacted with 2,4-methylene diphenyl diisocyanate (MDI). In this study, polymer concrete was improved to achieve the optimum level of PU with the lowest possible density. The PU particles in the concrete mixture comprised of 1% to 5% w/w with density of less than 1800 kg/m3. The PU particles were 5 mm in size. The ratio of PKO-p to MDI was set at 1:1 and the loading of the concrete mixture was set at 3% w/w to produce lightweight concrete. The resulting concrete has excellent compressive strength (17.5 MPa) and thermal conductivity (0.24 W/mK). Results show that the PU particle dosage has the most significant effect on the physical and mechanical properties of concrete.

Comparative Measurements of the Thermal Properties of Solid Materials on a New Device and Using a New Non-Stationary Method

2016 ◽  
Vol 366 ◽  
pp. 63-72 ◽  
Author(s):  
Milena Kušnerová ◽  
Lukáš Gola ◽  
Jan Valíček ◽  
Vojtěch Václavík ◽  
Marta Harničárová ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Thermal Insulation ◽  
Lightweight Concrete ◽  
Residential Buildings ◽  
Concrete Strength ◽  
Construction Materials ◽  
New Device ◽  
Measurement Results ◽  
Temperature Dependences ◽  
Material Coefficient

The aim of the publication is the comparative measurements of changes in temperature of the significant material coefficient - thermal conductivity for newly developed construction materials (lightweight concrete). The aim is met by using a newly proposed method and a newly developed device by the approximation modelling of the temperature dependence of the thermal conductivity coefficient of the new composites and also the interpretation of measurement results in the context of optimally desired characteristics of thermal insulation concrete. Construction materials for residential buildings should have good thermal insulation properties, i.e. relatively low coefficients of thermal conductivity. With regard to the relatively most important property of concrete – strength, however, the reduction in thermal conductivity of concrete is limited. Thermal conductivity of concrete can be reduced very effectively by increasing its porosity; on the other hand, by increasing the porosity, the strength of concrete is significantly reduced. The publication, therefore, compares the results of temperature dependences of thermal conductivity for three newly designed concretes, namely in the context of their compressive strength.

Prediction of compressive strength and elastic modulus of expanded polystyrene lightweight concrete

2015 ◽  
Vol 67 (17) ◽  
pp. 954-962 ◽  
Author(s):  
Yi Xu ◽  
Linhua Jiang ◽  
Jinxia Xu ◽  
Hongqiang Chu ◽  
Yang Li
Keyword(s):  
Compressive Strength ◽  
Elastic Modulus ◽  
Lightweight Concrete ◽  
Expanded Polystyrene

scholarly journals Production of lightweight Geopolymer concrete using artificial local lightweight aggregate

2018 ◽  
Vol 162 ◽  
pp. 02024
Author(s):  
Waleed Abbas ◽  
Wasan Khalil ◽  
Ibtesam Nasser
Keyword(s):  
Thermal Conductivity ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Lightweight Concrete ◽  
Lightweight Aggregate ◽  
Experimental Tests ◽  
Pulse Velocity ◽  
Dry Density ◽  
Geopolymer Concrete

Due to the rapid depletion of natural resources, the use of waste materials and by-products from different industries of building construction has been gaining increased attention. Geopolymer concrete based on Pozzolana is a new material that does not need the presence of Portland cement as a binder. The main focus of this research is to produce lightweight geopolymer concrete (LWGPC) using artificial coarse lightweight aggregate which produced from locally available bentonite clays. In this investigation, the binder is low calcium fly ash (FA) and the alkali activator is sodium hydroxide and sodium silicate in different molarities. The experimental tests including workability, fresh density, also, the compressive strength, splitting tensile strength, flexural strength, water absorption and ultrasonic pulse velocity at the age of 7, 28 and 56 days were studied. The oven dry density and thermal conductivity at 28 days age are investigated. The results show that it is possible to produce high strength lightweight geopolymer concrete successfully used as insulated structural lightweight concrete. The 28-day compressive strength, tensile strength, flexural strength, dry density, and thermal conductivity of the produced LWGPC are 35.8 MPa, 2.6MPa, 5.5 MPa, 1835kg/m3, and 0.9567 W/ (m. K), respectively.

scholarly journals THE EFFECT OF EXPANDED GLASS AND POLYSTYRENE WASTE ON THE PROPERTIES OF LIGHTWEIGHT AGGREGATE CONCRETE

2016 ◽  
Vol 8 (1) ◽  
pp. 31-40 ◽  
Author(s):  
Jurga Šeputytė-Jucikė ◽  
Marijonas Sinica
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Conductivity Coefficient ◽  
Lightweight Aggregate ◽  
Expanded Polystyrene ◽  
Partial Replacement ◽  
Lightweight Aggregate Concrete ◽  
Aggregate Concrete ◽  
Low Thermal Conductivity ◽  
Polystyrene Waste

The main objective of this study is to create a lightweight aggregate concrete (LWAC) with a low thermal conductivity coefficient using expanded glass (EG) aggregate, produced from waste glass or crushed expanded polystyrene waste, obtained by crushing waste packing tare of household appliances. Research related to the effects of the amount of Portland cement (PC) as well as EG aggregates and crushed expanded polystyrene waste on physical (density, thermal conductivity coefficient, water absorption and capillary coefficient) and mechanical (compressive strength) properties of LWAC samples are provided. Insulating LWAC based on a small amount of PC and lightweight EG aggregates and crushed expanded polystyrene waste, with especially low thermal conductivity coefficient values (from 0.070 to 0.098 W/ (m·K)) has been developed. A strong relationship between thermal conductivity coefficient and density of LWAC samples was obtained. The density of LWAC samples depending on the amount of PC ranged between 225 and 335 kg/m3. A partial replacement of EG aggregate by crushed expanded polystyrene waste, results in relative density decrease of LWAC samples. In LWAC samples the increased amount of PC results in increased compressive strength.

scholarly journals Novel Core-Shell Non-Sintered Lightweight Aggregate Concrete for Better Properties in Wallboard

2021 ◽  
Author(s):  
Chaoming PANG ◽  
Xinxin MENG ◽  
Chunpeng ZHANG ◽  
Jinlong PAN
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Insulation ◽  
Lightweight Concrete ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Dry Density ◽  
Core Shell ◽  
Aggregate Concrete ◽  
The Core

Abstract Shrinkage of foam concrete can easily cause cracking and thus makes it difficult for a manufacturer to maintain quality. The density of lightweight aggregate concrete is too high to meet specifications for lightweight and thermal insulation for wallboard. Two types of concrete with dry density in the range 1000–1200 kg/m3 for use in wallboard were designed and prepared using foam and lightweight aggregate. The properties of porous lightweight aggregate concrete with core-shell non-sintered lightweight aggregate were compared with sintered lightweight aggregate concrete along with several dimensions. The two aggregates were similar in particle size, density, and strength. The effects of each aggregate on the workability, compressive strength, dry shrinkage, and thermal conductivity of the lightweight concrete were analyzed and compared. Pore structures were determined by mercury intrusion porosimetry and X-ray computed tomography. Compressive strength ranged from 7.8 to 11.8 MPa, and thermal conductivity coefficients ranged from 0.193 to 0.219 W/m/K for both types of concrete. The results showed that the core-shell non-sintered lightweight aggregate bonded better with the paste matrix at the interface transition zone and had a better pore structure than the sintered lightweight aggregate concrete. Slump flow of the core-shell non-sintered lightweight aggregate concrete was about 20% greater than that of the sintered lightweight aggregate concrete, 28d compressive strength was about 10% greater, drying shrinkage was about 10% less, and thermal conductivity was less. Porous lightweight aggregate concrete using core-shell non-sintered lightweight aggregate performs well when used in wallboard because of its low density, high thermal insulation, and improved strength.

Sign in / Sign up

Export Citation Format

Share Document