scholarly journals Synthesis of Green Diesel From Waste Cooking Oil Through Hydrodeoxygenation Technology With NiMo/γ-Al2O3 Catalysts

2018 ◽  
Vol 156 ◽  
pp. 03032
Author(s):  
Heri Heriyanto ◽  
SD Murti Sumbogo ◽  
Septina Is Heriyanti ◽  
Inayatu Sholehah ◽  
Ayi Rahmawati
Keyword(s):  
Reaction Time ◽  
Batch Reactor ◽  
Waste Cooking Oil ◽  
Low Grade ◽  
Transportation Fuel ◽  
Green Diesel ◽  
Cooking Oil ◽  
Waste Cooking Oils ◽  
Cooking Oils ◽  
First Time

Hydrodeoxygenation (HDO) of waste cooking oil (WCO) and trapped grease over sulfide catalysts was examined to produce high quality transportation fuel from low-grade resources. The hydrodeoxygenation of waste cooking oils was carried out in a high pressure of 30 and 60 bar and high temperature of 300 – 400 °C in a batch reactor autoclave. NiMo/γ-Al2O3 catalyst was prepared and for the first time tested in hydroprocessing of waste cooking oil. The content of NiMo/γ-Al2O3 in each catalyst was about wCo 5 wt.%. A maximum of 77,97 % green diesel yield was achieved at nearly complete conversion of waste cooking oil using NiMo/γ-Al2O3 at temperature of 400°C, pressure 60 bar and 4 hours of reaction time. The oxygen content was decreased from 14,25 wt.% to 13,35 wt.%, at temperature of 400°C, pressure of 30 bar and 1 hour of reaction time. The Hydrodeoxygenation process was much influenced by temperature, pressure, and time.

scholarly journals Innovative applications of waste cooking oil as raw material

2019 ◽  
Vol 102 (2) ◽  
pp. 153-160 ◽  
Author(s):  
Alberto Mannu ◽  
Monica Ferro ◽  
Maria Enrica Di Pietro ◽  
Andrea Mele
Keyword(s):  
Hazardous Waste ◽  
Industrial Application ◽  
Waste Cooking Oil ◽  
Review Article ◽  
Raw Material ◽  
Cooking Oil ◽  
Waste Cooking Oils ◽  
Cooking Oils ◽  
Recycled Waste

The consideration towards waste cooking oils is changing from hazardous waste to valuable raw material for industrial application. During the last 5 years, some innovative processes based on the employment of recycled waste cooking oil have appeared in the literature. In this review article, the most recent and innovative applications of recycled waste cooking oil are reported and discussed. These include the production of bioplasticizers, the application of chemicals derived from waste cooking oils as energy vectors and the use of waste cooking oils as a solvent for pollutant agents.

scholarly journals The Production of Green Diesel Rich Pentadecane (C15) from Catalytic Hydrodeoxygenation of Waste Cooking Oil using Ni/Al2O3-ZrO2 and Ni/SiO2-ZrO2

2021 ◽  
Vol 17 (1) ◽  
pp. 135-145
Author(s):  
Momodou Salieu Sowe ◽  
Arda Rista Lestari ◽  
Eka Novitasari ◽  
Masruri Masruri ◽  
Siti Mariyah Ulfa
Keyword(s):  
Batch Reactor ◽  
Waste Cooking Oil ◽  
Gas Chromatography Mass Spectrometry ◽  
X Ray Diffraction ◽  
Fuel Processing ◽  
Green Diesel ◽  
X Ray ◽  
Cooking Oil ◽  
Isotherm Adsorption ◽  
Adsorption Desorption

Hydrodeoxygenation (HDO) is applied in fuel processing technology to convert bio-oils to green diesel with metal-based catalysts. The major challenges to this process are feedstock, catalyst preparation, and the production of oxygen-free diesel fuel. In this study, we aimed to synthesize Ni catalysts supported on silica-zirconia and alumina-zirconia binary oxides and evaluated their catalytic activity for waste cooking oil (WCO) hydrodeoxygenation to green diesel. Ni/Al2O3-ZrO2 and Ni/SiO2-ZrO2 were synthesized by wet-impregnation and hydrodeoxygenation of WCO was done using a modified batch reactor. The catalysts were characterized using X-ray diffraction (XRD), X-ray fluorescence (XRF), and scanning electron microscopy - energy dispersive X-ray spectroscopy (SEM-EDS), and N2 isotherm adsorption-desorption analysis. Gas chromatography - mass spectrometry (GC-MS) analysis showed the formation of hydrocarbon framework n-C15 generated from the use of Ni/Al2O3-ZrO2 with the selectivity of 68.97% after a 2 h reaction. Prolonged reaction into 4 h, decreased the selectivity to 58.69%. Ni/SiO2-ZrO2 catalyst at 2 h showed selectivity of 55.39% to n-C15. Conversely, it was observed that the reaction for 4 h increased selectivity to 65.13%. Overall, Ni/Al2O3-ZrO2 and Ni/SiO2-ZrO2 catalysts produced oxygen-free green diesel range (n-C14-C18) enriched with n-C15 hydrocarbon. Reaction time influenced the selectivity to n-C15 hydrocarbon. Both catalysts showed promising hydrodeoxygenation activity via the hydrodecarboxylation pathway. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

scholarly journals PENGARUH MASSA KATALIS DAN WAKTU REAKSI PADA PEMBUATAN BIODIESEL DARI LIMBAH MINYAK JELANTAH DENGAN MENGGUNAKAN KATALIS HETEROGEN K2O DARI LIMBAH KULIT KAKAO

2017 ◽  
Vol 6 (2) ◽  
pp. 24-29
Author(s):  
Jefry R Turnip ◽  
Trio F. L. Tarigan ◽  
Mersi Suriani Sinaga
Keyword(s):  
Reaction Time ◽  
Corn Oil ◽  
Waste Cooking Oil ◽  
Raw Material ◽  
National Standard ◽  
Solid Catalyst ◽  
Waste Oil ◽  
Cooking Oil ◽  
High Level ◽  
Cooking Oils

Waste cooking oil is a waste oil that comes from many types of cooking oils such as corn oil, vegetable oil, ect. The purpose of this research is to waste cooking oil as a raw material to form biodiesel with K2O as the solid catalyst from cocoa pod ash (CPA) which is calcined on temperature 650 oC within 4 hours. This oil contains a high level of Free Fatty Acid (FFA) that is 3.13%. Therefore, pretreatment should be done by using activated carbon (1% w/w) to reduce levels of FFA. The research will be observed the effect of reaction time and the mass of catalyst. The characteristics of biodiesel is analyzed according to the levels of methyl ester in biodiesel, density, and viscosity based on the Indonesian National Standard (SNI). The best conditions of biodiesel are obtained with the amount of catalyst is 6% (w/w) that is calcined at 650 °C, reaction time 180 minutes, ratio mol of alcohol : oil is 12: 1, and 65 oC reaction of temperature, resulting the purity and yield of biodiesel is 99,8% and 92,68%. The results of this research indicates that the use of waste cooking as a raw material is suitable in the manufacture of biodiesel.

Detection of Adulterated Vegetable Oils Containing Waste Cooking Oils Based on the Contents and Ratios of Cholesterol, β-Sitosterol, and Campesterol by Gas Chromatography/Mass Spectrometry

2015 ◽  
Vol 98 (6) ◽  
pp. 1645-1654 ◽  
Author(s):  
Haixiang Zhao ◽  
Yongli Wang ◽  
Xiuli Xu ◽  
Heling Ren ◽  
Li Li ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Gas Chromatography ◽  
Vegetable Oils ◽  
Waste Cooking Oil ◽  
Gas Chromatography Mass Spectrometry ◽  
Quick Method ◽  
Cooking Oil ◽  
Waste Cooking Oils ◽  
Cooking Oils

Abstract A simple and accurate authentication method for the detection of adulterated vegetable oils that contain waste cooking oil (WCO) was developed. This method is based on the determination of cholesterol, β-sitosterol, and campesterol in vegetable oils and WCO by GC/MS without any derivatization. A total of 148 samples involving 12 types of vegetable oil and WCO were analyzed. According to the results, the contents and ratios of cholesterol, β-sitosterol, and campesterol were found to be criteria for detecting vegetable oils adulterated with WCO. This method could accurately detect adulterated vegetable oils containing 5% refined WCO. The developed method has been successfully applied to multilaboratory analysis of 81 oil samples. Seventy-five samples were analyzed correctly, and only six adulterated samples could not be detected. This method could not yet be used for detection of vegetable oils adulterated with WCO that are used for frying non-animal foods. It provides a quick method for detecting adulterated edible vegetable oils containing WCO.

Intensification of waste cooking oil transformation by transesterification and esterification reactions in oscillatory baffled and microstructured reactors for biodiesel production

2014 ◽  
Vol 3 (6) ◽  
Author(s):  
Alex Mazubert ◽  
Joelle Aubin ◽  
Sébastien Elgue ◽  
Martine Poux
Keyword(s):  
Fatty Acid ◽  
Acid Methyl Ester ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Cooking Oil ◽  
Acid Methyl ◽  
Waste Cooking Oils ◽  
Microstructured Reactors ◽  
Esterification Reactions ◽  
Cooking Oils

AbstractThe transformation of waste cooking oils for fatty acid methyl ester production is investigated in two intensified technologies: microstructured Corning

scholarly journals Biodiesel Production from Waste Cooking Oil: Characterization, Modeling and Optimization

2021 ◽  
Vol 1 (1) ◽  
pp. 22-30
Author(s):  
Aditya Kolakoti ◽  
Muji Setiyo ◽  
Budi Waluyo
Keyword(s):  
Unsaturated Fatty Acids ◽  
Optimization Methods ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Fatty Acid Profiles ◽  
Modeling And Optimization ◽  
Cooking Oil ◽  
Waste Cooking Oils ◽  
Oil Characterization ◽  
Cooking Oils

In this study, waste and discarded cooking oils (WCO) of palm, sunflower, rice bran and groundnut oils are collected from local restaurants. The high viscous WCO was converted into waste cooking oil biodiesel (WCOBD) by a single-stage transesterification process. During the transesterification process, the important parameters which show a significant change in biodiesel yield are studied using the optimization tool of response surface methodology (RSM). Results reported that 91.30% biodiesel yield was achieved within L18 experiments and NaOH catalyst was identified as the most influential parameter on WCOBD yield. Artificial Intelligence (AI) based modeling was also carried out to predict biodiesel yield. From AI modeling, a predicted yield of 92.88% was achieved, which is 1.70% higher than the RSM method. These results reveal the prediction capabilities and accuracy of the chosen modeling and optimization methods. In addition, the significant fuel properties are measured and observed within the scope of ASTM standards (ASTMD6751) and fatty acid profiles from chromatography reveal the presence of high unsaturated fatty acids in WCOBD. Therefore, utilizing the waste cooking oils for biodiesel production can mitigate the global challenges of environmental and energy paucity.

scholarly journals Innovative applications of Waste Cooking Oil as Raw Material

2019 ◽  
Author(s):  
Alberto Mannu ◽  
Monica Ferro ◽  
Maria Enrica Di Pietro ◽  
Andrea Mele
Keyword(s):  
Hazardous Waste ◽  
Industrial Application ◽  
Waste Cooking Oil ◽  
Review Article ◽  
Raw Material ◽  
Present Review ◽  
Cooking Oil ◽  
Waste Cooking Oils ◽  
Cooking Oils ◽  
Recycled Waste

The consideration toward Waste Cooking Oils (WCOs) is changing from hazardous waste to valuable raw material for industrial application. During the last five years some innovative processes based on the employment of recycled WCO have appeared in the literature. In the present review article, the most recent applications of recycled Waste Cooking Oil are reported and discussed. These include the production of bio-plasticizers, the application of chemicals derived from WCOs as energy vectors, and the use of WCOs as solvent for pollutant agents.

scholarly journals Glycolipid Biosurfactant Production from Waste Cooking Oils by Yeast: Review of Substrates, Producers and Products

Fermentation ◽  
2021 ◽  
Vol 7 (3) ◽  
pp. 136
Author(s):  
Janis Liepins ◽  
Karina Balina ◽  
Raimonda Soloha ◽  
Ieva Berzina ◽  
Liva Kristiana Lukasa ◽  
...  
Keyword(s):  
Yeast Species ◽  
Waste Cooking Oil ◽  
Cooking Oil ◽  
Bulk Chemicals ◽  
Glycolipid Biosurfactant ◽  
Cost Cutting ◽  
Waste Cooking Oils ◽  
Effective Cost ◽  
Composition Properties ◽  
Cooking Oils

Biosurfactants are a microbially synthesized alternative to synthetic surfactants, one of the most important bulk chemicals. Some yeast species are proven to be exceptional biosurfactant producers, while others are emerging producers. A set of factors affects the type, amount, and properties of the biosurfactant produced, as well as the environmental impact and costs of biosurfactant’s production. Exploring waste cooking oil as a substrate for biosurfactants’ production serves as an effective cost-cutting strategy, yet it has some limitations. This review explores the existing knowledge on utilizing waste cooking oil as a feedstock to produce glycolipid biosurfactants by yeast. The review focuses specifically on the differences created by using raw cooking oil or waste cooking oil as the substrate on the ability of various yeast species to synthesize sophorolipids, rhamnolipids, mannosylerythritol lipids, and other glycolipids and the substrate’s impact on the composition, properties, and limitations in the application of biosurfactants.

Synthesis and Characterization of Heterogeneous Solid Acid Catalyst from Alstonia Scolaris Stalks for Biodiesel Production using Waste Cooking Oil

2020 ◽  
Vol 10 ◽  
Author(s):  
Charishma Venkata Sai Anne ◽  
Karthikeyan S. ◽  
Arun C.
Keyword(s):  
Reaction Time ◽  
Solid Acid ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Wood Biomass ◽  
Waste Wood ◽  
X Ray ◽  
Cooking Oil

Background: Waste biomass derived reusable heterogeneous acid based catalysts are more suitable to overcome the problems associated with homogeneous catalysts. The use of agricultural biomass as catalyst for transesterification process is more economical and it reduces the overall production cost of biodiesel. The identification of an appropriate suitable catalyst for effective transesterification will be a landmark in biofuel sector Objective: In the present investigation, waste wood biomass was used to prepare a low cost sulfonated solid acid catalyst for the production of biodiesel using waste cooking oil. Methods: The pretreated wood biomass was first calcined then sulfonated with H2SO4. The catalyst was characterized by various analyses such as, Fourier-transform infrared spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray Spectroscopy (EDS) and X-ray diffraction (XRD). The central composite design (CCD) based response surface methodology (RSM) was applied to study the influence of individual process variables such as temperature, catalyst load, methanol to oil molar ration and reaction time on biodiesel yield. Results: The obtained optimized conditions are as follows: temperature (165 ˚C), catalyst loading (1.625 wt%), methanol to oil molar ratio (15:1) and reaction time (143 min) with a maximum biodiesel yield of 95 %. The Gas chromatographymass spectrometry (GC-MS) analysis of biodiesel produced from waste cooking oil was showed that it has a mixture of both monounsaturated and saturated methyl esters. Conclusion: Thus the waste wood biomass derived heterogeneous catalyst for the transesterification process of waste cooking oil can be applied for sustainable biodiesel production by adding an additional value for the waste materials and also eliminating the disposable problem of waste oils.

Sign in / Sign up

Export Citation Format

Share Document