scholarly journals Multi-criteria analysis of ten single family houses regarding environmental impacts

2020 ◽  
Vol 310 ◽  
pp. 00065
Author(s):  
Andrea Moňoková ◽  
Silvia Vilčeková
Keyword(s):  
Life Cycle ◽  
Environmental Impacts ◽  
Reduction Rate ◽  
Mineral Wool ◽  
Expanded Polystyrene ◽  
Building Structures ◽  
Single Family ◽  
Abiotic Depletion Potential ◽  
Abiotic Depletion ◽  
Depletion Potential

This study presents a life cycle assessment (LCA) of ten single family houses located in Eastern Slovakia with the aim to compare them in terms of the materials and technologies used. The main goal is to investigate and emphasize the reduction rate of environmental impact resulting from using green materials and technologies. Environmental impacts are determined by using eToolLCD software. Life cycle impact assessment (LCIA) categories of global warming, ozone depletion, acidification, eutrophication and photochemical ozone creation potential, as well as abiotic depletion potential - elements, abiotic depletion potential - fossil fuels, use of renewable primary energy resources, net use of fresh water, components for reuse and materials for recycling are determined within the cradle-to-grave boundary. Assessed family houses are built as a combination of conventional materials such as aerated concrete blocks, expanded polystyrene (EPS), extruded polystyrene (XPS) and roofing mineral wool and natural materials such as wood, cellulose, clay, straw and extensive vegetation roofs. Multi-criteria decision analysis points out that material optimization of building structures as well as the application of green technologies can ensure a considerable reduction of environmental impacts.

Sustainable Construction - Environmental Impacts Assessment of Architectural Elements and Building Services

2020 ◽  
Vol 47 ◽  
pp. 77-83 ◽  
Author(s):  
Andrea Moňoková ◽  
Silvia Vilčeková
Keyword(s):  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Building Materials ◽  
Sustainable Construction ◽  
Building Structures ◽  
Single Family ◽  
Architectural Elements ◽  
Ozone Formation Potential ◽  
Environmental Technologies

Increasing concerns about negative environmental impacts of building structures call for higher demands on the design of environmental friendly buildings. This article is aimed at assessing the overall environmental impact of buildings throughout its life cycle as well as on environmental impact of all building materials and building services for single-family homes. This analysis examines the role of utilized green environmental technologies for the following selected impact categories: GWP - global warming potential, EP - eutrophication potential, AP - acidification potential POCP and photochemical ozone formation potential expressed in kg CO2eq, PO43-eq, SO2eq and ethylene within the “Cradle to gate with options” boundary. The LCA assessment methodology and eToolLCD software have been used to model the effects of houses’ life cycle.

Life Cycle Assessment of Metallic Copper Produced by the Pyrometallurgical Technology of China

2015 ◽  
Vol 814 ◽  
pp. 559-563 ◽  
Author(s):  
Hong Tao Wang ◽  
Yu Liu ◽  
Xian Zheng Gong ◽  
Zhi Hong Wang ◽  
Feng Gao ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Copper Production ◽  
Copper Smelting ◽  
Environmental Load ◽  
Copper Ore ◽  
Abiotic Depletion Potential ◽  
Abiotic Depletion ◽  
Depletion Potential

With the rapid development of industry in China, China has become the largest producer of refined copper as well as the largest consumer of copper in the world. In order to provide the support for decreasing the environmental impact of the copper pyrometallurgy of China, the life cycle assessment methodology was carried out in this study to identify and analyze the typical processes’ environmental load of refined copper production from ‘cradle-to-gate’ perspective. The results showed that the most serious environmental impact of copper pyrometallurgy was abiotic depletion potential and human toxicity. The abiotic depletion potential mainly comes from the copper ore mining, for this reason, increasing the use of renewable copper is an effective means to alleviate environmental load of our country copper pyrometallurgy industry. Meanwhile, reducing the direct and indirect discharge of poisonous and harmful elements (e.g. heavy metals) from the copper ore mining stage and the copper smelting process could decrease the human health damage efficiently.

The Application of the Life-Cycle Assessment in the Building Sector: An Italian Case Study

2017 ◽  
Vol 1 (1) ◽  
pp. 91-108
Author(s):  
Maurizio Cellura ◽  
Francesco Guarino ◽  
Sonia Longo
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Building Materials ◽  
Life Cycle Thinking ◽  
Single Family ◽  
Building Sector ◽  
Life Cycle Assessment Methodology ◽  
Use Of Resources ◽  
Whole Life Cycle

The building sector is one of the most relevant in terms of generation of wealth and occupation, but it is also responsible for significant consumption of natural resources and the generation of environmental impacts, mainly greenhouse gas emissions. In order to improve the eco profile of buildings during their life-cycle, the reduction of the use of resources and the minimization of environmental impacts have become, in the last years, some of the main objectives to achieve in the design of sustainable buildings. The application of the life-cycle thinking approach, looking at the whole life cycle of buildings, is of paramount importance for a real decarbonization and reduction of the environmental impacts of the building sector. This paper presents an application of the life-cycle assessment methodology for assessing the energy and environmental life-cycle impacts of a single-family house located in the Mediterranean area in order to identify the building components and life-cycle steps that are responsible of the higher burdens. The assessment showed that the largest impacts are located in the use stage; energy for heating is significant but not dominant, while the contribution of electricity utilized for households and other equipment resulted very relevant. High environmental impacts are also due to manufacture and transport of building materials and components.

scholarly journals Comparative Life Cycle Assessment of Marine Insulation Materials

2021 ◽  
Vol 9 (10) ◽  
pp. 1099
Author(s):  
Hayoung Jang ◽  
Yoonwon Jang ◽  
Byongug Jeong ◽  
Nak-Kyun Cho
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Polyurethane Foam ◽  
Mineral Wool ◽  
Expanded Polystyrene ◽  
Environmental Indicators ◽  
Human Toxicity ◽  
Insulation Materials ◽  
Marine Vessels

This study aimed to reduce the holistic environmental impacts of insulation materials proposed for the accommodation of a marine cargo ship, and suggest the optimal option for cleaner ship production, using life cycle assessment. With a commercial bulk carrier as a case ship, three major insulations were assessed, which were wool-based material (mineral wool or glass wool), expanded polystyrene, and polyurethane foam. The analysis was scoped based on ‘from cradle to grave’, while focusing on the following five representative environmental indicators: global warming potential100years, acidification potential, eutrophication potential, ozone depletion potential, and human toxicity potential. The assessment was performed in the platform of the GaBi software. The results showed that polyurethane foam would have the greatest impacts, especially in regard to global warming, eutrophication, and human toxicity. On the other hand, expanded polystyrene and wool-based material showed better environmental performance than polyurethane foam. For example, wool-based insulation was found, in terms of GWP and HTP, to produce 2.1 × 104 kg CO2-eq and 760.1 kg DCB-eq, respectively, and expanded polystyrene had similar results with respect to GWP, AP, and EP as 2.1 × 104 kg CO2-eq, 23.3 kg SO2-eq, and 2.7 kg Phosphate-eq, respectively. In fact, the research findings point out the shortcomings of current design practices in selecting insulation materials for marine vessels, while providing meaningful insights into the importance of the selection of appropriate insulation materials for marine vessels for cleaner shipping. Therefore, it is believed that this paper will make a sound contribution to enhancing future design practice and regulatory frameworks in response to environmental issues in the marine industry.

scholarly journals Comparing construction technologies of single family housing with regard of minimizing embodied energy and embodied carbon

2018 ◽  
Vol 49 ◽  
pp. 00126 ◽  
Author(s):  
Arkadiusz Węglarz ◽  
Michał Pierzchalski
Keyword(s):  
Life Cycle ◽  
Assessment Method ◽  
Mineral Wool ◽  
Embodied Energy ◽  
Single Family ◽  
Cumulative Energy ◽  
Wooden Frame ◽  
Embodied Carbon ◽  
Building Information ◽  
Method Of Evaluation

This article concerns the Life Cycle Assessment method of evaluation and the ways in which it can be applied as a tool facilitating the design of buildings to reduce embodied energy and embodied carbon. Three variants of a building were examined with the same functional ground plan and usable floor area of 142.6 m2. Each variant of the building was designed using different construction technologies: bricklaying technology utilizing autoclaved aerated concrete popular in Poland, wooden frame insulated with mineral wool, and the Straw-bale technology. Using digital models (Building Information Model) the building’s energy characteristics was simulated and the embodied energy and embodied carbon of the production stage (also called cradle-to-gate) were calculated. The performed calculations were used to compare the cumulative energy and embodied carbon of each variant for a 40 year long life cycle.

scholarly journals Life Cycle Assessment of Mortars Produced Partially Replacing Cement by Treated Mining Residues

2021 ◽  
Vol 11 (17) ◽  
pp. 7947
Author(s):  
Joana Almeida ◽  
Paulina Faria ◽  
Alexandra Branco Ribeiro ◽  
António Santos Silva
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Ozone Depletion ◽  
Chemical Properties ◽  
Management Options ◽  
Photochemical Ozone ◽  
Mining Residues ◽  
Abiotic Depletion

The use of secondary mining resources to replace conventional constituents in mortars production has proved the effectiveness to preserve the quality of mechanical, physical, and chemical properties. However, minimal research has been performed to quantify the environmental impacts of mortars with mining residues. In the present work, a life cycle assessment of 10 mortars was carried out. A reference mortar (100% of cement binder) and mortars with cement substitutions in 10, 25, and 50% by raw, electrodialytic treated, and electrodialytic plus thermal treated mining residues were analysed. The impacts were studied in six environmental categories: (1) abiotic depletion; (2) global warming; (3) ozone depletion; (4) photochemical ozone creation; (5) acidification; and (6) eutrophication potentials. The results demonstrated that mortars formulated with raw mining residues may decrease the environmental impacts, namely in global warming potential (55.1 kg CO2 eq./t modified mortar). Considering the treatments applied to mining residues, the major mitigations were reported in photochemical ozone creation (−99%), ozone depletion (−76 to −98%), and acidification potential (−90 to −94%), mainly due to the disposal impacts avoided in comparison to the reference mortar. Analysing all mortars’ constituents and their management options, products with electrodialytic treated mining residues showed higher influence in ozone depletion (18 to 52%). Coupling a thermal procedure, mining residues contributed for 99% of the abiotic depletion potential of mortars.

scholarly journals A Comparative Life Cycle Assessment (LCA) of Gasoline Blending with Different Oxygenates in India

2021 ◽  
Vol 20 (5) ◽  
Author(s):  
Sushil M. Chaudhari ◽  
Rohit B. Meshram
Keyword(s):  
Life Cycle ◽  
Toxicity Potential ◽  
Ethanol Addition ◽  
Acidification Potential ◽  
Human Toxicity Potential ◽  
Abiotic Depletion Potential ◽  
Cradle To Gate ◽  
Potential Impact ◽  
Natural Gas Reforming ◽  
Depletion Potential

This paper includes a cradle-to-gate life cycle impact evaluation of gasoline blends in India. The potential environmental impacts of gasoline blends with three major components, i.e., methanol, ethanol, and n-butanol are assessed. The production of methanol from the natural gas reforming process, ethanol from hydrogenation with nitric acid, and n-butanol from the oxo process are considered in the current study. The results show that the gasoline blending with methanol has the lowest impact (11 categories) and is nearly constant from 5 to 15%. For gasoline with ethanol as an additive, the global warming potential, ozone depletion potential, and abiotic depletion potential rise with increasing ethanol addition. Meanwhile, increasing ethanol addition reduces the acidification potential and terrestric ecotoxicity potential impact of gasoline blends. Similarly, gasoline with n-butanol as an additive has higher acidification potential, eutrophication potential, human toxicity potential, terrestric ecotoxicity potential, marine aquatic ecotoxicity potential, and photochemical ozone creation potential compared to methanol and ethanol.

scholarly journals Life Cycle Analysis of Single Family Houses and Effects of Green Technologies on Environment

Proceedings ◽  
2019 ◽  
Vol 16 (1) ◽  
pp. 19 ◽  
Author(s):  
Andrea Moňoková ◽  
Silvia Vilčeková ◽  
Iveta Selecká
Keyword(s):  
Life Cycle ◽  
Negative Impact ◽  
Reduction Rate ◽  
Design And Technology ◽  
Impact Categories ◽  
Single Family ◽  
Product Phase ◽  
Green Technologies ◽  
Silicate Mineral ◽  
Positive Effects

Construction and using of buildings for many years produce long-lasting impacts on human health and the environment. Life cycle assessment (LCA) is the rapidly evolving science of clarifying these impacts in terms of their quality, severity, and duration. LCA of three selected new family houses located in Eastern Slovakia is performed with the aim to compare them in terms of built-in materials as well as used technologies. The main goal of the analysis is to investigate and underline the foreseeable reduction rate of environmental impacts resulting from applied green materials and green technologies. LCA impact categories of global warming potential (GWP), ozone depletion potential (ODP), acidification potential (AP), eutrophication potential (EP), and photochemical ozone creation potential (POCP) are selected for this analysis. Investigated family houses are built from conventional materials, such as aerated concrete blocks, reinforced concrete, thermal insulation of silicate mineral slabs, and roofing mineral wool, as well as natural materials, such as clay, straw, wood, cellulose, and vegetation roofs. Product phase contributes greatly to the GWP for houses built of conventional materials. AP, EP, ODP, and POCP impact categories are considerable also in the product phase. Even an operational energy phase contributes a large share of the negative impact on the environment. Adoption of green design and technology in buildings, which can mitigate negative impacts on the environment, has been recognized as a key step towards global sustainable development. The main goal of this article is to make the case that green buildings are important for reducing negative effects on the environment and resources, while simultaneously enhancing positive effects throughout the building life cycle.

Sign in / Sign up

Export Citation Format

Share Document