scholarly journals Triangle mesh skeletonization using non-deterministic voxel thinning and graph spectrum segmentation

2021 ◽  
Vol 336 ◽  
pp. 02030
Author(s):  
Santiago Moreno-Avendano ◽  
Daniel Mejia-Parra ◽  
Oscar Ruiz-Salguero

In the context of shape processing, the estimation of the medial axis is relevant for the simplification and re-parameterization of 3D bodies. The currently used methods are based on (1) General fields, (2) Geometric methods and (3) voxel-based thinning. They present shortcomings such as (1) overrepresentation and non-smoothness of the medial axis due to high frequency nodes and (2) biased-skeletons due to skewed thinning. To partially overcome these limitations, this article presents a non-deterministic algorithm for the estimation of the 1D skeleton of triangular B-Reps or voxel-based body representations. Our method articulates (1) a novel randomized thinning algorithm that avoids possible skewings in the final skeletonization, (2) spectral-based segmentation that eliminates short dead-end branches, and (3) a maximal excursion method for reduction of high frequencies. The test results show that the randomized order in the removal of the instantaneous skin of the solid region eliminates bias of the skeleton, thus respecting features of the initial solid. An Alpha Shape-based inversion of the skeleton encoding results in triangular boundary Representations of the original body, which present reasonable quality for fast non-minute scenes. Future work is needed to (a) tune the spectral filtering of high frequencies off the basic skeleton and (b) extend the algorithm to solid regions whose skeletons mix 1D and 2D entities.

2017 ◽  
Vol 21 (23) ◽  
pp. 1-188 ◽  
Author(s):  
Karoline Freeman ◽  
Hema Mistry ◽  
Alexander Tsertsvadze ◽  
Pam Royle ◽  
Noel McCarthy ◽  
...  

Background Gastroenteritis is a common, transient disorder usually caused by infection and characterised by the acute onset of diarrhoea. Multiplex gastrointestinal pathogen panel (GPP) tests simultaneously identify common bacterial, viral and parasitic pathogens using molecular testing. By providing test results more rapidly than conventional testing methods, GPP tests might positively influence the treatment and management of patients presenting in hospital or in the community. Objective To systematically review the evidence for GPP tests [xTAG® (Luminex, Toronto, ON, Canada), FilmArray (BioFire Diagnostics, Salt Lake City, UT, USA) and Faecal Pathogens B (AusDiagnostics, Beaconsfield, NSW, Australia)] and to develop a de novo economic model to compare the cost-effectiveness of GPP tests with conventional testing in England and Wales. Data sources Multiple electronic databases including MEDLINE, EMBASE, Web of Science and the Cochrane Database were searched from inception to January 2016 (with supplementary searches of other online resources). Review methods Eligible studies included patients with acute diarrhoea; comparing GPP tests with standard microbiology techniques; and patient, management, test accuracy or cost-effectiveness outcomes. Quality assessment of eligible studies used tailored Quality Assessment of Diagnostic Accuracy Studies-2, Consolidated Health Economic Evaluation Reporting Standards and Philips checklists. The meta-analysis included positive and negative agreement estimated for each pathogen. A de novo decision tree model compared patients managed with GPP testing or comparable coverage with patients managed using conventional tests, within the Public Health England pathway. Economic models included hospital and community management of patients with suspected gastroenteritis. The model estimated costs (in 2014/15 prices) and quality-adjusted life-year losses from a NHS and Personal Social Services perspective. Results Twenty-three studies informed the review of clinical evidence (17 xTAG, four FilmArray, two xTAG and FilmArray, 0 Faecal Pathogens B). No study provided an adequate reference standard with which to compare the test accuracy of GPP with conventional tests. A meta-analysis (of 10 studies) found considerable heterogeneity; however, GPP testing produces a greater number of pathogen-positive findings than conventional testing. It is unclear whether or not these additional ‘positives’ are clinically important. The review identified no robust evidence to inform consequent clinical management of patients. There is considerable uncertainty about the cost-effectiveness of GPP panels used to test for suspected infectious gastroenteritis in hospital and community settings. Uncertainties in the model include length of stay, assumptions about false-positive findings and the costs of tests. Although there is potential for cost-effectiveness in both settings, key modelling assumptions need to be verified and model findings remain tentative. Limitations No test–treat trials were retrieved. The economic model reflects one pattern of care, which will vary across the NHS. Conclusions The systematic review and cost-effectiveness model identify uncertainties about the adoption of GPP tests within the NHS. GPP testing will generally correctly identify pathogens identified by conventional testing; however, these tests also generate considerable additional positive results of uncertain clinical importance. Future work An independent reference standard may not exist to evaluate alternative approaches to testing. A test–treat trial might ascertain whether or not additional GPP ‘positives’ are clinically important or result in overdiagnoses, whether or not earlier diagnosis leads to earlier discharge in patients and what the health consequences of earlier intervention are. Future work might also consider the public health impact of different testing treatments, as test results form the basis for public health surveillance. Study registration This study is registered as PROSPERO CRD2016033320. Funding The National Institute for Health Research Health Technology Assessment programme.


2021 ◽  
Vol 16 (1) ◽  
pp. 1-9
Author(s):  
Ruan Evangelista Formigoni ◽  
Ricardo Santos Ferreira ◽  
José Augusto M. Nacif

CMOS technology is reaching power, thermal, and physical limits at an alarming pace. As a response, post-silicon research investigates alternative technologies to perform computation. Field-Coupled Nanocomputing (FCN) presents low power dissipation, high frequencies, and room temperature operation. Nevertheless, FCN imposes several challenges in the development of efficient and scalable CAD tools. The placement and routing step is especially tricky in FCN compared to CMOS because of synchronization issues inherent to these technologies, such as path balancing and reconvergent paths. In this work, we survey the state-of-art of placement and routing algorithms for FCN. We describe the most recent FCN placement and routing algorithms, highlighting their limitations and, finally, presenting future work directions.


2021 ◽  
Author(s):  
Shital Desai ◽  
Alethea Blackler ◽  
Vesna Popovic

Interfaces for children have continued to evolve in terms of complexity, with toys ranging from traditional tangible interfaces to apps with digital interfaces and hybrid toys with mixed physical and digital interfaces. However, there is limited research done to investigate their potential for intuitive use. This research study compares a tangible toy and an equivalent toy in the digital world (app) for intuitive use. Non-parametric Mann-Whitney U test results showed that the tangible toy was more intuitive than the intangible counterpart. Tangible systems are less complex to use and they require less time to encode and retrieve associated knowledge to use them intuitively. They are associated with low domain transfer distance and easily discoverable features. Intangible interfaces, on the other hand, require greater complexity and time to encode and retrieve associated experiential knowledge. Intangibles are associated with larger domain transfer distance and undiscoverable features which affects their intuitive use. Design implications and future work are discussed, emphasising the need for investigating aspects that make tangible systems intuitive to use. Keywords: Intuitive Interaction; Tangibles; Intangibles; Sensorimotor


1966 ◽  
Vol 1 (10) ◽  
pp. 63 ◽  
Author(s):  
Wilbur Marks

A mobile breakwater concept based upon a perforated front wall and solid back wall is presented. The principles of energy dissipation by the system is discussed as well as the potential role of such a device within the framework of practical application. Model test results, comparing the perforated breakwater's response to waves with that of a caisson-type breakwater, are discussed. It is shown that the perforated breakwater experiences less force on the structure when it is fixed to the bottom and less force on the mooring lines when afloat than the caisson-type. However, the perforated breakwater is not more effective in reducing waves, for the conditions tested. Visual observations show that scouring is prevalent when the caisson-type is fixed to the bottom; there is no evidence of scouring with the perforated breakwater. Recommendations are made for future work.


Author(s):  
Takehiko Eguchi ◽  
Yohei Asai ◽  
Kazuhide Ichikawa ◽  
Miki Takada

In this paper, contributions of airborne and structure-borne vibrations to head positioning error of a HDD at high frequencies up to 10 kHz were investigated. The L8 array test was conducted with four two-level factors about vibration isolation between fans and HDDs: A) Removing bracket, B) Attaching foam on backplane, C) Filling foam in the next column, and D) Filling foam in the upper and lower slots. The test results showed there were less interaction between airborne and structure-borne vibration. Then, we set a model of fan vibration transmission and the model parameters were determined so that errors between the estimated and measured values were minimized. As the results, it was confirmed that about 80% of the power of PES was caused by the airborne vibration at the normal case.


Author(s):  
L. M. Rudd ◽  
C. G. Barnes ◽  
D. A. Kelly

This paper outlines relevant aspects of the operation of thrust cones and describes salient features of an unexpected form of failure encountered in small-scale thrust cone simulation tests. Interpretation of the thrust cone simulation test results in the light of related twin-disc tests at the relevant low slide-roll ratio leads to two conclusions. Rather than scuffing, the limiting surface failure mechanism in small-scale thrust cone tests was general plastic deformation with cold pressure welding promoted by the lack of support at the cone edges and the prolate epicycloidal path followed by the contact. The limiting surface failure mechanism in full-scale thrust cone bearings, which have markedly lower curvature and higher rolling speed than used in small-scale simulation tests, was predicted to be scuffing delayed to relatively severe operating conditions by prior running-in. Further development of the insights gained from the related twin-disc work results in two recommendations. Future work should be directed to assessing the surface modification that follows transition from EHL to mixed lubrication and redefining the conditions in which transition to micro-EHL occurs in order to quantify the potential enhancement of scuffing resistance offered by controlled running-in. It should also concentrate on evaluating the combined effects of microgeometry conducive to lubricant film formation and material properties resistant to weld formation in order to obviate the difficulty of assigning a representative value to the operating friction coefficient that is common to a number of proposed failure criteria.


Author(s):  
Haritha Malladi ◽  
Meron Asnake ◽  
Andrew LaCroix ◽  
Cassie Castorena

Asphalt emulsions are used extensively in tack coats and preservation surface treatments. The current specifications for asphalt emulsion residue recovery in AASHTO PP 72 are based on low-temperature evaporative drying. The shortest residue recovery procedure included in AASHTO PP 72 requires 6 h of conditioning in an oven to dry an emulsion. The ability to recover emulsion residues efficiently is of great interest given the ongoing efforts to develop emulsion performance-graded specifications based on residual binder properties. In this study, a rapid, vacuum drying technology was evaluated for asphalt emulsion residue recovery. The procedure enables the recovery of sufficient residual binder for dynamic shear rheometer (DSR) testing within 20–40 min. Five emulsions of different classifications were evaluated using both the vacuum drying procedure and the AASHTO PP 72 procedures. The vacuum drying procedure leads to similar water loss to the AASHTO PP 72 procedures. Based on the temperature-frequency sweep and multiple stress creep and recovery (MSCR) test results, the vacuum-dried residues are softer and more viscous than residues recovered using the AASHTO PP 72 procedures. Fourier transform infrared spectroscopy (FTIR) was performed to identify if oxidation levels could explain the observed in rheological trends. However, the results suggest no clear trend in the oxidation levels of residues recovered using AASHTO PP 72 compared with the rapid vacuum procedure. Future work is necessary to infer which method best reflects residual binders placed in the field.


2021 ◽  
Author(s):  
D. Dobrilovic ◽  
M. Mazalica ◽  
G. Gecin

Considering the growing appliance of wireless technologies in the Internet of Things and Wireless Sensor Networks the question of their coexistence and interoperability becomes extremely important. Wi-Fi and ZigBee technologies already have a long-lasting presence in the market as well as deployment in many systems. Because of their numerous appliances, it is extremely important to measure the impact of one technology on another. This paper has presented the approach of using open-source hardware and software for measuring the interference effects of Wi-Fi to ZigBee. The testing platform is built on Arduino microcontroller boards. This paper describes the experiment, the experimental platform, methodology, and tools used for collecting and analyzing data, as well as the experience gained during the experiments, and its influence on future work. The results presented in this paper give a clear insight into how the IEEE 802.11 networks influence the throughput of IEEE 802.15.4 networks when operating in similar frequencies. According to presented test results, Wi-Fi at distances of about 12m can affect the ZigBee throughput when the central frequency difference is 7 MHz or lower.


2019 ◽  
Author(s):  
Catriona I. Wootton ◽  
Mong K. Sodaly ◽  
Somxay X. Billamay ◽  
John S.C. English ◽  
Mayxay Mayfong

AbstractBackgroundDermatological services in Laos, South East Asia are limited mainly to the capital and patch testing is currently not available, so no data exists regarding the common cutaneous allergens in this population.ObjectivesThe aim of this study was to document common allergens in paediatric patients with atopic dermatitis attending the allergy clinic in the capital, Vientiane.Patients/Materials/MethodsFifty paediatric patients with atopic dermatitis were patch tested using TRUE Test® panels 1 to 3 (35 allergens). Readings were taken at Days 2 and 4.ResultsTwenty-six positive patch tests were recorded on Day 4 in 15 children (30%). The most common allergens were: gold (18%), nickel (10%), formaldehyde (6%) and p-Phenylenediamine (6%). Other positive allergens were potassium dichromate (2%), cobalt dichloride (2%), Bronopol (2%), paraben mix (2%), fragrance mix 1 (2%) and neomycin (2%). The majority of the patients with positive reactions were female.ConclusionsThis study represents the first documented patch test results in the Lao population. It is hoped that these findings will help clinicians to advise the families of children with atopic dermatitis on common allergens to avoid and inform future work on contact dermatitis in this population.


Sign in / Sign up

Export Citation Format

Share Document