scholarly journals Automated Electrochemical Selenenylations

Synthesis ◽  
2020 ◽  
Vol 52 (12) ◽  
pp. 1751-1761 ◽  
Author(s):  
Thomas Wirth ◽  
Nasser Amri

Integrated electrochemical reactors in automated flow systems were utilised for selenenylation reactions. The automation allowed multiple electrochemical reactions of a programmed sequence to be performed in a fully autonomous way. Many functionalised selenenylated­ products were synthesised in short reaction times in good to high yields.

Synlett ◽  
2020 ◽  
Vol 31 (19) ◽  
pp. 1894-1898
Author(s):  
Thomas Wirth ◽  
Nasser Amri

Integrated electrochemical reactors in automated flow systems have been utilised for chalcogenophosphite formations. Multiple electrochemical reactions can be performed using a programmed sequence in a fully autonomous way. Differently functionalised chalcogenophosphites have been efficiently synthesised in short reaction times.


2019 ◽  
Vol 16 (6) ◽  
pp. 913-920 ◽  
Author(s):  
Israel Bonilla-Landa ◽  
Emizael López-Hernández ◽  
Felipe Barrera-Méndez ◽  
Nadia C. Salas ◽  
José L. Olivares-Romero

Background: Hafnium(IV) tetrachloride efficiently catalyzes the protection of a variety of aldehydes and ketones, including benzophenone, acetophenone, and cyclohexanone, to the corresponding dimethyl acetals and 1,3-dioxolanes, under microwave heating. Substrates possessing acid-labile protecting groups (TBDPS and Boc) chemoselectively generated the corresponding acetal/ketal in excellent yields. Aim and Objective: In this study. the selective protection of aldehydes and ketones using a Hafnium(IV) chloride, which is a novel catalyst, under microwave heating was observed. Hence, it is imperative to find suitable conditions to promote the protection reaction in high yields and short reaction times. This study was undertaken not only to find a novel catalyst but also to perform the reaction with substrates bearing acid-labile protecting groups, and study the more challenging ketones as benzophenone. Materials and Methods: Using a microwave synthesis reactor Monowave 400 of Anton Paar, the protection reaction was performed on a raging temperature of 100°C ±1, a pressure of 2.9 bar, and an electric power of 50 W. More than 40 substrates have been screened and protected, not only the aldehydes were protected in high yields but also the more challenging ketones such as benzophenone were protected. All the products were purified by simple flash column chromatography, using silica gel and hexanes/ethyl acetate (90:10) as eluents. Finally, the protected substrates were characterized by NMR 1H, 13C and APCI-HRMS-QTOF. Results: Preliminary screening allowed us to find that 5 mol % of the catalyst is enough to furnish the protected aldehyde or ketone in up to 99% yield. Also it was found that substrates with a variety of substitutions on the aromatic ring (aldehyde or ketone), that include electron-withdrawing and electrondonating group, can be protected using this methodology in high yields. The more challenging cyclic ketones were also protected in up to 86% yield. It was found that trimethyl orthoformate is a very good additive to obtain the protected acetophenone. Finally, the protection of aldehydes with sensitive functional groups was performed. Indeed, it was found that substrates bearing acid labile groups such as Boc and TBDPS, chemoselectively generated the corresponding acetal/ketal compound while keeping the protective groups intact in up to 73% yield. Conclusion: Hafnium(IV) chloride as a catalyst provides a simple, highly efficient, and general chemoselective methodology for the protection of a variety of structurally diverse aldehydes and ketones. The major advantages offered by this method are: high yields, low catalyst loading, air-stability, and non-toxicity.


2021 ◽  
Vol 76 (2) ◽  
pp. 85-90
Author(s):  
Abdolkarim Zare ◽  
Manije Dianat

Abstract A highly efficient and green protocol for the synthesis of pyrimido[4,5-b]quinolines has been described. The one-pot multicomponent reaction of dimedone with arylaldehydes and 6-amino-1,3-dimethyluracil in the presence of N,N-diethyl-N-sulfoethanaminium chloride ([Et3N–SO3H][Cl]) as an ionic liquid (IL) catalyst under solvent-free conditions afforded the mentioned compounds in high yields and short reaction times. Our protocol is superior to many of the reported protocols in terms of two or more of these factors: the reaction times, yields, conditions (solvent-free versus usage of organic solvents), temperature and catalyst amount.


2021 ◽  
Vol 3 (6) ◽  
Author(s):  
Kobra Nikoofar ◽  
Fatemeh Shahriyari

AbstractA simple, straightforward, and ultrasound-promoted method for the preparation of some highly functionalized tetrahydropyridines reported via pseudo five-component reaction of (hetero)aromatic aldehydes, different anilines, and alkyl acetoacetates in the presence of [N-CH2CO2H-3-pic]+HSO4−, as a novel ionic liquid, in green aqueous medium. The IL was synthesized utilizing simple and easily-handled substrates and characterized by FT-IR, 1H NMR, 13C NMR, GC-MASS, FESEM, EDX, and TGA/DTG techniques. The procedure contains some highlighted aspects which are: (a) performing the MCR in the presence of aqua and sonic waves, as two main important and environmentally benign indexes in green and economic chemistry, (b) high yields of products within short reaction times, (c) convenient work-up procedure, (d) preparing the new IL via simple substrates and procedure.


BMC Chemistry ◽  
2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Arefeh Dehghani Tafti ◽  
Bi Bi Fatemeh Mirjalili ◽  
Abdolhamid Bamoniri ◽  
Naeimeh Salehi

AbstractNano-eggshell/Ti(IV) as a novel naturally based catalyst was prepared, characterized and applied for the synthesis of dihydropyrano[2,3-c]pyrazole derivatives. The characterization of nano-eggshell/Ti(IV) was performed using Fourier Transform Infrared spectroscopy, X-ray Diffraction, Field Emission Scanning Electron Microscopy, Energy-Dispersive X-ray Spectroscopy, and Thermo Gravimetric Analysis. Dihydropyrano[2,3-c]pyrazoles were synthesized in the presence of nano-eggshell/Ti(IV) via a four component reaction of aldehydes, ethyl acetoacetate, malononitrile and hydrazine hydrate at room temperature under solvent free conditions. The principal affairs of this procedure are mild condition, short reaction times, easy work-up, high yields, reusability of the catalyst and the absence of toxic organic solvents.


2021 ◽  
Vol 18 ◽  
Author(s):  
Abolfazl Olyaei ◽  
Zahra Ghahremany ◽  
Madieh Sadeghpour

: A green and efficient protocol was developed for the one-pot three-component synthesis of novel 2-(4-hydroxy-2-oxo-2H-chromen-3-yl)-2-(arylamino)-1H-indene-1,3(2H)-dione derivatives by the reaction of 4-hydroxycoumarin, ninhydrin and aromatic amines in the presence of guanidine hydrochloride as an organocatalyst under solvent-free conditions. The present approach offers several advantages such as low cost, simple work-up, short reaction times, chromatography-free purification, high yields and greener conditions.


2002 ◽  
Vol 4 (4) ◽  
pp. 281-295 ◽  
Author(s):  
Jose González-García ◽  
Angel Frías-Ferrer ◽  
Vicente Montiel ◽  
Antonio Aldaz ◽  
Juan A. Conesa

This paper analyses the hydrodynamic behaviour of electrochemical reactors by simulating stimulus–response experiments. The experiments were performed with a simple experimental arrangement to generate data (Residence Time Distribution (RTD) curves) from electrolytic conductivity measurements. The multiparametric model proposed and the Matlab program developed allow the study of electrochemical reactors using three-dimensional electrodes, providing values of characteristic parameters of the materials, such as porosity and compressibility. The study of the reactor also permits modelling of the electrochemical reactions that will be produced inside it.


2021 ◽  
Author(s):  
Mojgan Zendehdel ◽  
Fatemeh Tavakoli

Abstract A new class of catalyst has been prepared with sulfunic acid functionalized HY zeolite (HY-N-SO3H) and characterized by FESEM, TEM, FTIR, TGA, XRD and BET. The result show that the catalyst has the micro-meso structure without ordering in the mesophase. Then, two sets of organic reaction were examined to consider of catalytic activity. The micro-meso structure HY-N-SO3H was used as an acidic catalyst to synthesis of coumarins via Pechmann reaction and facile transformation of amines to formamides under solvent free condition. This catalyst was compared with NaY-N-SO3H and MCM-N-SO3H and pure porous material to consider of the effect of acidity and kind and size of porous in the catalyst. The significant advantages of HY-N-SO3H respect to other catalyst are short reaction times, high yields, pure products, mild conditions and easy workup. In addition, we report an original and environmentally friendly solvent-free procedures which reusability of catalyst makes this method nearly green and environmental friendly.


2010 ◽  
Vol 8 (1) ◽  
pp. 12-18 ◽  
Author(s):  
Kiran Shelke ◽  
Suryakant Sapkal ◽  
Kirti Niralwad ◽  
Bapurao Shingate ◽  
Murlidhar Shingare

AbstractA green, mild and efficient method for Knoevenagel condensation of 3-formylchromone/2-chlroquinoline-3-carbaldehyde with active methylene compounds such as Meldrum’s acid/ethyl cyanoacetate using biosupported cellulose sulphuric acid (CSA) in the solid-state by grinding under solvent-free condition has been developed. This method provides several advantages including environmental friendliness, shor t reaction times, high yields and a simple work-up procedure. Moreover, the CSA was successfully reused for four cycles without significant loss of activity.


Catalysts ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 208 ◽  
Author(s):  
Valerio De Vitis ◽  
Federica Dall’Oglio ◽  
Francesca Tentori ◽  
Martina Contente ◽  
Diego Romano ◽  
...  

Enantiomerically enriched 2-hydroxymethylalkanoic acids were prepared by oxidative desymmetrisation of achiral 1,3-diols using immobilized cells of Acetobacter aceti in water at 28 °C. The biotransformations were first performed in batch mode with cells immobilized in dry alginate, furnishing the desired products with high molar conversion and reaction times ranging from 2 to 6 h. The biocatalytic process was intensified using a multiphasic flow reactor, where a segmented gas–liquid flow regime was applied for achieving an efficient O2-liquid transfer; the continuous flow systems allowed for high yields and high biocatalyst productivity.


Sign in / Sign up

Export Citation Format

Share Document