scholarly journals Evaluation of Mandibular First Molars’ Axial Inclination and Alveolar Morphology in Different Facial Patterns: A CBCT Study

2020 ◽  
Vol 14 (02) ◽  
pp. 250-259 ◽  
Author(s):  
Marcos Cezar Ferreira ◽  
Karina Maria Salvatore de Freitas ◽  
Francyle Simões Herrera-Sanches ◽  
Patrícia Bittencourt dos Santos ◽  
Daniela Garib ◽  
...  
Keyword(s):  
The Other ◽  
Cone Beam ◽  
Bone Morphology ◽  
Mandibular Molar ◽  
Significant Difference ◽  
Mandibular Body ◽  
Facial Pattern ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

Abstract Objective The purpose of this study was to evaluate and compare the axial inclination of the mandibular first molars and their respective bone morphology among individuals with different facial patterns. Materials and Methods The sample comprised the cone beam computed tomographies (CBCTs) of 58 subjects divided into three groups according to the facial patterns: 18 brachyfacial (Group 1), with a mean age of 21.58 years; 23 mesofacial (Group 2), with a mean age of 19.14 years; and 17 dolichofacial subjects (Group 3), with a mean age of 19.09 years. Eight variables were evaluated on CBCT scans of each subject: buccal and lingual mandibular height, cervical and middle mandibular width, inclination of mandibular body, inclination of the mandibular molar buccal surface, molar width, molar angulation and tooth/bone angle. Intergroup comparisons were performed with one-way analysis of variance followed by Tukey tests. Results Buccal mandibular height presented statistically significant difference in the three facial patterns. Lingual mandibular height and mandibular inclination showed to be statistically and significantly smaller in brachyfacial subjects than in the other two groups. Mandibular width presented a statistically significant difference between brachyfacial and mesofacial groups. Negative correlations could be observed between the facial pattern and the buccal and lingual mandibular heights and inclination of the mandibular body. Conclusion Buccal mandibular height was significantly and progressively larger in brachyfacial, mesofacial, and dolichofacial subjects. Lingual mandibular height was significantly smaller in brachyfacial than in mesofacial and dolichofacial subjects. Mandibular width was significantly thicker in brachyfacial than in mesofacial subjects. Brachyfacial subjects had smaller mandibular inclination than mesofacial and dolichofacial subjects.

scholarly journals In Vitro Microbiological Analysis of Bacterial Seal at the Implant-Abutment Interface Using Two Morse Taper Implant Models

2014 ◽  
Vol 25 (1) ◽  
pp. 48-53 ◽  
Author(s):  
Deceles Cristina Costa Alves ◽  
Paulo Sérgio Perri de Carvalho ◽  
Elizabeth Ferreira Martinez
Keyword(s):  
Brain Heart Infusion ◽  
The Other ◽  
Microbiological Analysis ◽  
Torque Wrench ◽  
Significant Difference ◽  
Implant Abutment ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

The objective of this study was to evaluate the bacterial seal at the implant-abutment interface using two morse taper implant models, by means of an in vitro microbiological analysis. For that were used 15 implants with mini-abutments tightened by friction, no screws (Group 1); and 30 implants with screw-tightened abutments, of which 15 received 20 N.cm of closing torque (Group 2) and the other 15 received 30 N.cm (Group 3). Microbiological analysis was carried out using colonies of Escherichia coli transported directly from a culture dish to the prosthetic component. Friction implants (Group 1) were activated by tapping and a torque wrench was used for screw-tightened implants (Groups 2 and 3). Each abutment/implant set was immersed in test tubes containing 5 mL of brain-heart infusion broth and incubated at 37 °C for 14 days, observed daily for the presence of contamination. A statistically significant difference was observed regarding the number of contaminated implants. There was greater contamination in Group 2 implants (p<0.05), with no statistically significant difference between the other groups (Group 1 = 20% and Group 3 = 0%). It was concluded that there was no significant difference in in vitro bacterial sealing between implants with mini-abutments tightened by friction without screws and implants with screw-tightened abutments with 30 N.cm of closing torque. The difference in closing torque altered the in vitro sealing ability of the tested abutments, with a greater contamination for components that received a closing torque of 20 N.cm.

scholarly journals Comparison of perioperative parameters in one-handed rotational phacoemulsification versus conventional phacoemulsification and femtosecond laser-assisted cataract surgery

2021 ◽  
Vol 14 (12) ◽  
pp. 1868-1875
Author(s):  
Samuele Gigliola ◽  
◽  
Alfredo Niro ◽  
Carmela Palmisano ◽  
Pasquale Puzo ◽  
...  
Keyword(s):  
Endothelial Cell ◽  
Femtosecond Laser ◽  
Cataract Surgery ◽  
The Other ◽  
Dissipated Energy ◽  
Surgical Time ◽  
Significant Difference ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

AIM: To compare perioperative parameters of one-handed rotational phacoemulsification technique (one-handed phaco-roll) with each of other two techniques, “Divide et Conquer” and femtosecond laser-assisted cataract surgery (FLACS) METHODS: In this retrospective and comparative cohort study, eyes with uncomplicated cataract (nuclear density grade 2 to 3) treated routinely with one-handed phaco-roll (n=23; Group 1) or “Divide et Conquer” (n=23; Group 2) or FLACS (n=23; Group 3) were enrolled. Intraoperative parameters including effective phaco-time (EPt), ultrasound time (USt), aspiration time, surgical time, phacoemulsification (phaco)-power, balanced salt solution (BSS) use, cumulative dissipated energy (CDE) were recorded and compared. Clinical outcomes including best corrected visual acuity (BCVA), corneal endothelial cell density (ECD), endothelial cell loss (ECL), central corneal thickness (CCT) and central macular thickness (CMT), were assessed and compared pre-operatively and at 1mo after surgery. RESULTS: Aspiration and surgical time, and BSS used were lower in Group 1 (P<0.01) than other groups. EPt, phaco-power and CDE were lower in Group 1 (P<0.05) than Group 2 but not significantly different from Group 3. In Group 1, USt was lower (P<0.05) than Group 2 but higher (P<0.05) than Group 3. BCVA improved in all groups without significant difference between Group 1 and the other ones. No significant differences regarding all post-operative morphologic outcomes (ECD, ECL, CCT, CMT) were reported. No clinical complications occurred. CONCLUSION: One-handed phaco-roll seems to be less time-consuming than “Divide et Conquer” and FLACS and less energy-consuming than “Divide et Conquer”. Furthermore, one-handed phaco-roll seems to have an equal safety profile compared to the other two techniques.

The Penetration of Ofloxacin into Human Aqueous Humor Given by Various Routes

1998 ◽  
Vol 8 (1) ◽  
pp. 33-36 ◽  
Author(s):  
S. Hanioglu-Kargi ◽  
N. Basci ◽  
H. Soysal ◽  
A. Bozkurt ◽  
E. Gürsel ◽  
...  
Keyword(s):  
Aqueous Humor ◽  
Bacterial Infections ◽  
High Performance ◽  
Cataract Extraction ◽  
The Other ◽  
Group 4 ◽  
Significant Difference ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

This study was designed to measure the concentration of ofloxacin in aqueous humor after topical, oral and intravenous administration in 50 patients undergoing cataract extraction. In Group 1, ofloxacin 0.3% eyedrops were topically instilled ten times and the aqueous humor concentration was 2.73 ± 0.88 μg/ml. In Group 2, ofloxacin 0.3% eyedrops were topically instilled six times and the aqueous humor concentration was 0.84 ± 0.61 μg/ml. Aqueous humor concentration 12 hours after 200 mg oral dose in Group 3, was 0.38 ± 0.12 μg/ml. In Group 4, patients were given ofloxacin as a single intravenous 200 mg dose and the aqueous humor concentration 2 hours after the end of infusion was 0.45 ± 0.11 μg/ml. Concentrations were determined by high performance liquid chromatography (HPLC) with fluorescence detection. There was a significant difference between Group 1 and the other groups, but not between Group 2 and Groups 3, 4. It was concluded that ofloxacin penetrates the corneal and the blood-aqueous barriers and can achieve good aqueous levels when given topically and systematically. Ofloxacin can be applied topically for external bacterial infections such as conjunctivitis and keratitis. Systematically administered ofloxacin reached higher levels than the MIC for some bacteria which cause endophthalmitis.

In-vivo evaluation of the effect of cyanoacrylate on prosthetic vascular graft infection – does cyanoacrylate increase the severity of infection?

VASA ◽  
2020 ◽  
Vol 49 (4) ◽  
pp. 281-284
Author(s):  
Atıf Yolgosteren ◽  
Gencehan Kumtepe ◽  
Melda Payaslioglu ◽  
Cuneyt Ozakin
Keyword(s):  
Vascular Graft ◽  
Graft Infection ◽  
Vascular Graft Infection ◽  
Group 4 ◽  
Significant Difference ◽  
Group 3 ◽  
Group 2 ◽  
Prosthetic Vascular Graft Infection ◽  
Group 1

Summary. Background: Prosthetic vascular graft infection (PVGI) is a complication with high mortality. Cyanoacrylate (CA) is an adhesive which has been used in a number of surgical procedures. In this in-vivo study, we aimed to evaluate the relationship between PVGI and CA. Materials and methods: Thirty-two rats were equally divided into four groups. Pouch was formed on back of rats until deep fascia. In group 1, vascular graft with polyethyleneterephthalate (PET) was placed into pouch. In group 2, MRSA strain with a density of 1 ml 0.5 MacFarland was injected into pouch. In group 3, 1 cm 2 vascular graft with PET piece was placed into pouch and MRSA strain with a density of 1 ml 0.5 MacFarland was injected. In group 4, 1 cm 2 vascular graft with PET piece impregnated with N-butyl cyanoacrylate-based adhesive was placed and MRSA strain with a density of 1 ml 0.5 MacFarland was injected. All rats were scarified in 96th hour, culture samples were taken where intervention was performed and were evaluated microbiologically. Bacteria reproducing in each group were numerically evaluated based on colony-forming unit (CFU/ml) and compared by taking their average. Results: MRSA reproduction of 0 CFU/ml in group 1, of 1410 CFU/ml in group 2, of 180 200 CFU/ml in group 3 and of 625 300 CFU/ml in group 4 was present. A statistically significant difference was present between group 1 and group 4 (p < 0.01), between group 2 and group 4 (p < 0.01), between group 3 and group 4 (p < 0.05). In terms of reproduction, no statistically significant difference was found in group 1, group 2, group 3 in themselves. Conclusions: We observed that the rate of infection increased in the cyanoacyrylate group where cyanoacrylate was used. We think that surgeon should be more careful in using CA in vascular surgery.

scholarly journals Isometric Handgrip Exercise Training Improves Spirometric Parameters and Pulmonary Capacity

2021 ◽  
Vol 28 (3) ◽  
pp. 328-338
Author(s):  
Ogbutor Udoji Godsday ◽  
Nwangwa Eze Kingsley ◽  
Nwogueze Bartholomew Chukwuebuka ◽  
Chukwuemeka Ephraim ◽  
Ezunu Emmanuel ◽  
...  
Keyword(s):  
Pulmonary Function ◽  
Isometric Exercise ◽  
Handgrip Exercise ◽  
Isometric Handgrip ◽  
Post Exercise ◽  
Significant Difference ◽  
Isometric Handgrip Exercise ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

Decline in normal physiological pulmonary function has been attributed to premorbid conditions such as prehypertension. Research evidence suggests that physical activity reduces age-related decline in pulmonary function and improves the efficiency of the lungs in prehypertensive patients. However, there is a scarcity of data evidence relating to isometric exercise and pulmonary function. Furthermore, the interrelationship between the intensity and duration of isometric exercise and pulmonary function in these patients is still uncertain. Therefore, this study was undertaken to investigate the effect of isometric handgrip exercise on pulmonary function capacity in adults with prehypertension. To determine the effectiveness of isometric handgrip exercise on pulmonary function capacity in adults with prehypertension. A quasi experiment using a pre- and post-exercise method was carried out in two out-patients hospital settings. The sample comprised 192 sedentary pre-hypertensive subjects, aged between 30–50 years, that were randomly distributed into three groups of 64 participants each. The subjects performed, for 24 consecutive days, an isometric handgrip exercise at 30% Maximum Voluntary Contraction (M.V.C.). At the end of the 24 days, group one (GP1) discontinued, while group two (GP2) continued the exercise protocol for another 24 consecutive days and group three (GP3) continued with the exercise protocol for another 24 consecutive days but at 50% M.V.C. Determinants of lung function (outcomes) were Forced Expiratory Volume in 1 s (FEV1), Forced Vital Capacity (FVC), FEV1/FVC Ratio and Peak Expiratory Flow Rate (PEFR). The study shows that there was no statistically significant difference in the pre- and post-exercise outcomes for FEV1, FVC, FEV1/FVC Ratio and PEFR after 24 days for group 1. In group 2, there was a statistically significant difference in the FVC [(mean = 0.12 ± 0.12), (p = 0.002)], FEV1 [(mean = 0.15 ± 0.17), (p = 0.003)] and PEF [(mean = 0.85 ± 0.35), (p = 0.001)] after 48 days. In group 3, there was a statistically significant difference (p = 0.001) in all the outcomes assessed after 48 days. There was a between groups difference in favour of group 2 compared with group 1 for outcomes of FEV1 [(mean = 0.142 ± 0.68), (p = 0.005)] and PEF [(mean = 0.83 ± 0.19), (p = 0.0031)]. There was statistically significant difference in favour of group 3 compared to group 2, by increasing the exercise intensity from 30% to 50% M.V.C., for outcomes of FVC [mean change = 0.10 ± 0.052), (p = 0.005)], FEV1/FVC [mean change = 3.18 ± 0.75), (p = 0.017)] and PEF [(mean change = 0.86 ± 0.35), (p = 0.001)] after 48 days. Isometric handgrip exercise (after 48 days at 30% to 50% M.V.C.) improves outcomes of pulmonary function capacity in adults with prehypertension. Meanwhile, duration and/or increase in intensity of the isometric effort significantly contributed to the affects attained.

scholarly journals Effects of posterior tibial slope on the mid-term results of medial unicompartmental knee arthroplasty

Arthroplasty ◽  
2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Zhijie Chen ◽  
Kaizhe Chen ◽  
Yufei Yan ◽  
Jianmin Feng ◽  
Yi Wang ◽  
...  
Keyword(s):  
Knee Flexion ◽  
Tibial Slope ◽  
Posterior Tibial ◽  
Significant Difference ◽  
Medial Unicompartmental Knee Arthroplasty ◽  
Group 3 ◽  
Group 2 ◽  
Postoperative Knee ◽  
Group 1

Abstract Objective To evaluate the effect of medial posterior tibial slope (PTS) on mid-term postoperative range of motion (ROM) and functional improvement of the knee after medial unicompartmental knee arthroplasty (UKA). Methods Medical records of 113 patients who had undergone 124 medial UKAs between April 2009 through April 2014 were reviewed retrospectively. The mean follow-up lasted 7.6 years (range, 6.2–11.2 years). Collected were demographic data, including gender, age, height, weight of the patients. Anteroposterior (AP) and lateral knee radiographs of the operated knees were available in all patients. The knee function was evaluated during office follow-up or hospital stay. Meanwhile, postoperative PTS, ROM, maximal knee flexion and Hospital for Special Surgery (HSS) knee score (pre−/postoperative) of the operated side were measured and assessed. According to the size of the PTS, patients were divided into 3 groups: group 1 (<4°), group 2 (4° ~ 7°) and group 3 (>7°). The association between PTS and the knee function was investigated. Results In our cohort, the average PTS was 2.7° ± 0.6° in group 1, 5.6° ± 0.9° in group 2 and 8.7° ± 1.2° in group 3. Pairwise comparisons showed significant differences among them (p < 0.01). The average maximal flexion range of postoperative knees in each group was 112.4° ± 5.6°, 116.4° ± 7.2°, and 117.5° ± 6.1°, respectively, with significant difference found between group 1 and group 2 (p < 0.05), and between group 1 and group 3 (p < 0.05). However, the gender, age, and body mass index (BMI) did not differ between three groups and there was no significant difference between groups in terms of pre−/postoperative HSS scores or postoperative knee ROM. Conclusion A mid-term follow-up showed that an appropriate PTS (4° ~ 7°) can help improve the postoperative flexion of knee. On the other hand, too small a PTS could lead to limited postoperative knee flexion. Therefore, the PTS less than 4° should be avoided during medial UKA.

The Relationship between Serum Ferritin Levels and 5-Year All-Cause Mortality in Hemodialysis Patients

2021 ◽  
pp. 1-7
Author(s):  
Emre Erdem ◽  
Ahmet Karatas ◽  
Tevfik Ecder
Keyword(s):  
Serum Ferritin ◽  
Hemodialysis Patients ◽  
Rank Test ◽  
Significant Difference ◽  
All Cause Mortality ◽  
Group 3 ◽  
Group 2 ◽  
The Relationship ◽  
Group 1

<b><i>Introduction:</i></b> The effect of high serum ferritin levels on long-term mortality in hemodialysis patients is unknown. The relationship between serum ferritin levels and 5-year all-cause mortality in hemodialysis patients was investigated in this study. <b><i>Methods:</i></b> A total of 173 prevalent hemodialysis patients were included in this study. The patients were followed for up to 5 years and divided into 3 groups according to time-averaged serum ferritin levels (group 1: serum ferritin &#x3c;800 ng/mL, group 2: serum ferritin 800–1,500 ng/mL, and group 3: serum ferritin &#x3e;1,500 ng/mL). Along with the serum ferritin levels, other clinical and laboratory variables that may affect mortality were also included in the Cox proportional-hazards regression analysis. <b><i>Results:</i></b> Eighty-one (47%) patients died during the 5-year follow-up period. The median follow-up time was 38 (17.5–60) months. The 5-year survival rates of groups 1, 2, and 3 were 44, 64, and 27%, respectively. In group 3, the survival was lower than in groups 1 and 2 (log-rank test, <i>p</i> = 0.002). In group 1, the mortality was significantly lower than in group 3 (HR [95% CI]: 0.16 [0.05–0.49]; <i>p</i> = 0.001). In group 2, the mortality was also lower than in group 3 (HR [95% CI]: 0.32 [0.12–0.88]; <i>p</i> = 0.026). No significant difference in mortality between groups 1 and 2 was found (HR [95% CI]: 0.49 [0.23–1.04]; <i>p</i> = 0.063). <b><i>Conclusion:</i></b> Time-averaged serum ferritin levels &#x3e;1,500 ng/mL in hemodialysis patients are associated with an increased 5-year all-cause mortality risk.

scholarly journals Different lead locations guided by fluoroscopy and ECG parameters and their effect on patients functional status

2019 ◽  
Vol 71 (1) ◽  
Author(s):  
Mohamed MesbahTahaHassanin ◽  
Ahmad ShafieAmmar ◽  
Radwa M. Abdullah ◽  
Mohammad Hassan Khedr
Keyword(s):  
Functional Capacity ◽  
Systolic Function ◽  
Left Ventricular ◽  
Left Ventricular Dyssynchrony ◽  
Qrs Complex ◽  
Significant Difference ◽  
Septal Pacing ◽  
Group 3 ◽  
Group 2 ◽  
Group 1

Abstract Background Right ventricular apical pacing with the resultant left ventricular dyssynchrony often leads to depressed systolic function and heart failure. This study aimed at investigating the relation between various septal locations guided by ECG and fluoroscopy and the intermediate term functional capacity of the patients. Results Fifty patients who received a single lead pacemaker with assumed > 90% pacemaker dependency. Patients were randomized according to RV pacing site RV into group 1 “high septum” (n = 15), group 2 “mid septum” (n = 25), and group 3 “low septum” (n = 10) using QRS vector and duration as well as fluoroscopic parameters. Their clinical status was assessed 6 months after device implementation using 6-min walk test (6MWT). The study showed that paced QRS complex duration itself has no significant difference between the different septal pacing locations (P-value 0.675), although its combination with the paced QRS complex vector can signify the optimal pacing site and 6MWT showed a significant difference among the groups in favor of group 1; group 1 (413.3 ± 148.5), group 2 (359.8 ± 124.6), and group 3 (276.0 ± 98.5) P value 0.04. Conclusion There was a significant difference found between the three septal pacing sites concerning the patient functional capacity with superiority of high septal location. By contrast, different septal sites showed no significant difference of the paced QRS complex duration. To optimize the pacing site in the septum, assessment of the paced QRS vector in leads I and III is of a great benefit especially when combined with paced QRS complex duration assessment.

scholarly journals Fracture resistance of immature teeth filled with mineral trioxide aggregate, bioaggregate, and biodentine

2016 ◽  
Vol 10 (02) ◽  
pp. 220-224 ◽  
Author(s):  
Emre Bayram ◽  
Huda Melike Bayram
Keyword(s):  
Fracture Resistance ◽  
Mineral Trioxide Aggregate ◽  
Mean Values ◽  
Root Canals ◽  
Immature Teeth ◽  
Significant Difference ◽  
Group 3 ◽  
Group 2 ◽  
Post Hoc ◽  
Group 1

ABSTRACT Objective: The purpose of this study was to evaluate fracture resistance of teeth with immature apices treated with coronal placement of mineral trioxide aggregate (MTA), bioaggregate (BA), and Biodentine. Materials and Methods: Forty-one freshly extracted, single-rooted human premolar teeth were used for the study. At first, the root length was standardized to 9 mm. The crown-down technique was used for the preparation of the root canals using the rotary ProTaper system (Dentsply Maillefer, Ballaigues, Switzerland) of F3 (30). Peeso reamer no. 6 was stepped out from the apex to simulate an incompletely formed root. The prepared roots were randomly assigned to one control (n = 5) and three experimental (n = 12) groups, as described below. Group 1: White MTA (Angelus, Londrina, Brazil) was prepared as per the manufacturer's instructions and compacted into the root canal using MAP system (Dentsply Maillefer, Ballaigues, Switzerland) and condensed by pluggers (Angelus, Londrina, Brazil). Group 2: The canals were filled with DiaRoot-BA (DiaDent Group International, Canada). Group 3: Biodentine (Septodont, Saint Maur des Fosses, France) solution was mixed with the capsule powder and condensed using pluggers. Instron was used to determine the maximum horizontal load to fracture the tooth, placing the tip 3 mm incisal to the cementoenamel junction. Mean values of the fracture strength were compared by ANOVA followed by a post hoc test. P < 0.05 was considered statistically significant. Results: No significant difference was observed among the MTA, BA, and biodentine experimental groups. Conclusion: All the three materials tested, may be used as effective strengthening agents for immature teeth.

scholarly journals Filling of extraction sockets with autogenous bone in cats

2012 ◽  
Vol 27 (1) ◽  
pp. 82-87 ◽  
Author(s):  
Adelina Maria da Silva ◽  
Wilson Machado de Souza ◽  
Nair Trevizan Machado de Souza ◽  
Marion Burkhardt de Koivisto ◽  
Patrícia de Athayde Barnabé ◽  
...  
Keyword(s):  
Cortical Bone ◽  
Iliac Crest ◽  
Autogenous Bone ◽  
Canine Tooth ◽  
Extraction Socket ◽  
Significant Difference ◽  
Group 3 ◽  
Mandibular Canine ◽  
Group 2 ◽  
Group 1

PURPOSE: To evaluate bone healing in the extraction socket of the feline mandibular canine tooth after grafting. METHODS: Eighteen adult cats were submitted to unilateral extraction of mandibular canine tooth and divided into three groups. In group 1 (n=6), control, the extraction socket was left empty. In group 2 (n=6), the extraction socket was filled with autogenous cancelous bone from the iliac crest and in group 3 (n=6), with cortical bone chips from the iliac crest. Cats were euthanized at 6 weeks postoperative. RESULTS: Immediate postoperative radiographs in dorsoventral view showed a radiolucent area at the extraction wound. A decreased radiolucency was observed on the radiographs taken at 6 weeks postoperative. Histological examination showed formation of woven bone within the extraction socket. The percentage of newly formed bone within the extraction socket, measured by the histometry, showed no statistically significant difference among the values of the three groups (Kruskal-Wallis'test p>0.05) (group 1: 52.54 ± 15.46, group 2: 50.51 ± 5.01, group 3: 51.85 ± 9.52). CONCLUSION: The bone regeneration observed in the extraction sockets filled with autogenous cancellous bone or autogenous cortical bone chips was similar to that observed in the control sites, given an observation period of 6 weeks after extraction of the mandibular canine tooth.

Sign in / Sign up

Export Citation Format

Share Document