scholarly journals Morphological Analysis of Bone Deformities of the Distal Femur in Toy Poodles with Medial Patellar Luxation

2021 ◽  
Author(s):  
Shinji Yasukawa ◽  
Kazuya Edamura ◽  
Koji Tanegashima ◽  
Mamiko Seki ◽  
Kazushi Asano ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Distal Femur ◽  
Anterior Part ◽  
Femoral Condyle ◽  
Posterior Part ◽  
Lateral Condyle ◽  
Trochlear Groove ◽  
Sulcus Angle ◽  
Condylar Morphology ◽  
Bone Deformities

Abstract Objective The aim of this study was to evaluate the bone deformities of the distal femur of Toy Poodles with medial patellar luxation (MPL) using computed tomography. Methods Computed tomography data from 37 stifles of Toy Poodles (16 normal, 10 grade 2 MPL and 11 grade 4 MPL) were analysed. For trochlear morphology, sulcus angle, medial or lateral trochlear inclination and trochlear angle were compared. For condylar morphology, distance between the apex of the medial or lateral trochlear ridge and the most caudal point of the medial or lateral femoral condyle (MC or LC), the length of the cranial/middle (anterior) part (MC(a) or LC(a')) and caudal (posterior) part (MC(p) or LC(p')) of distal femur and medial or lateral condyle width (MCW or LCW) were measured, and the ratios of medial-to-lateral condyles and anterior–posterior parts were compared. Results Sulcus angle was significantly higher, and medial trochlear inclination was significantly lower in grade 4 MPL group than other groups. Lateral trochlear inclination was not significantly different among 3 groups. Trochlear angles at proximal trochlear groove were significantly lower in grade 4 MPL group than other groups. MC/LC, MC(a)/LC(a'), MC(a)/MC(p), and LC(a')/LC(p') were significantly lower in grade 4 MPL group than other groups; however, there were no significant differences in MC(p)/LC(p') and MCW/LCW among three groups. Conclusion Hypoplasia of the cranial and middle rather than caudal compartment of the distal femur was the primary morphological abnormality in Toy Poodles with grade 4 MPL.

Local Differences in Mineral Content in Vertebral Trabecular Bone Measured by Dual-Energy Computed Tomography

1989 ◽  
Vol 30 (4) ◽  
pp. 369-371 ◽  
Author(s):  
J. Nepper-Rasmussen ◽  
L. Mosekilde
Keyword(s):  
Computed Tomography ◽  
Central Region ◽  
Mineral Content ◽  
Anterior Part ◽  
Posterior Part ◽  
Region Of Interest ◽  
Calcium Content ◽  
Dual Energy ◽  
Dual Energy Ct ◽  
Vertebral Bodies

Twelve lumbar vertebral bodies from cadavers were examined with dual-energy CT, to measure the calcium content in a big central region of interest (ROI). In each of five vertebrae the calcium content was also measured in six small ROI. After completed scanning, six small cylinders were drilled out from each vertebra, and the ash-density of each cylinder was measured. The dual-energy CT measurements correlated well with the ash-density. Both ash-density and dual-energy CT showed a significantly higher mineral content in the posterior part of the vertebrae than in the anterior part, and this difference might be responsible for problems encountered with the reproducibility of dual-energy CT.

How Do Axial Scan Orientation Deviations Affect the Measurements of Knee Anatomical Parameters Associated with Patellofemoral Instability? A Simulated Computed Tomography Study

2017 ◽  
Vol 31 (05) ◽  
pp. 425-432 ◽  
Author(s):  
Ran Xiong ◽  
Cheng Chen ◽  
Li Yin ◽  
Xiaoyuan Gong ◽  
Jiangming Luo ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cruciate Ligament ◽  
Patellofemoral Instability ◽  
Ct Scanning ◽  
Tibial Tubercle ◽  
Trochlear Groove ◽  
Patellar Tilt ◽  
Sulcus Angle ◽  
Scan Data ◽  
Anatomical Parameters

AbstractThe purpose of this study was to detect the correlation between axial scan orientation discrepancy and the knee anatomical parameters associated with patellofemoral instability during computed tomography (CT) scanning. CT scan data of 16 knees from 16 healthy subjects were retrieved. The reslicing processes were performed to simulate different axial scan orientations generated due to leg adduction/abduction during CT scanning. Eight parameters (tibial tubercle to trochlear groove [TT-TG], tibial tubercle to posterior cruciate ligament [TT-PCL], patellar tilt, lateral trochlear inclination, sulcus angle, trochlear depth, trochlear facet asymmetry, and trochlear condyle asymmetry) of five angles (neutral zero, 4/8 degrees of adduction and 4/8 degrees abduction) were quantified. All eight parameters showed varying degrees of deviations to the different axial scan orientations. TT-TG, patellar tilt, lateral trochlear inclination, and trochlear condyle asymmetry were relatively sensitive to axial scan orientation changes, whereas TT-PCL, sulcus angle, trochlear depth, and trochlear facet asymmetry were relatively insensitive. Although the sensitivities are various, surgeons should be aware of this situation and make necessary corrections.

Distal femoral morphological dysplasia is correlated with increased femoral torsion in patients with trochlear dysplasia and patellar instability

2020 ◽  
Vol 102-B (7) ◽  
pp. 868-873
Author(s):  
Guangmin Yang ◽  
Yike Dai ◽  
Conglei Dong ◽  
Huijun Kang ◽  
Jinghui Niu ◽  
...  
Keyword(s):  
Patellar Instability ◽  
Trochlear Dysplasia ◽  
Femoral Condyle ◽  
Pearson Correlation ◽  
Femoral Anteversion ◽  
Lateral Condyle ◽  
Anteversion Angle ◽  
Medial Condyle ◽  
Femoral Torsion ◽  
Condylar Morphology

Aims The purpose of this study was to explore the correlation between femoral torsion and morphology of the distal femoral condyle in patients with trochlear dysplasia and lateral patellar instability. Methods A total of 90 patients (64 female, 26 male; mean age 22.1 years (SD 7.2)) with lateral patellar dislocation and trochlear dysplasia who were awaiting surgical treatment between January 2015 and June 2019 were retrospectively analyzed. All patients underwent CT scans of the lower limb to assess the femoral torsion and morphology of the distal femur. The femoral torsion at various levels was assessed using the a) femoral anteversion angle (FAA), b) proximal and distal anteversion angle, c) angle of the proximal femoral axis-anatomical epicondylar axis (PFA-AEA), and d) angle of the AEA–posterior condylar line (AEA-PCL). Representative measurements of distal condylar length were taken and parameters using the ratios of the bianterior condyle, biposterior condyle, bicondyle, anterolateral condyle, and anteromedial condyle were calculated and correlated with reference to the AEA, using the Pearson Correlation coefficient. Results The femoral torsion had a strong correlation with distal condylar morphology. The FAA was significantly correlated with the ratio of the bianterior condyle (r = 0.355; p = 0.009), the AEA-PCL angle (r = 0.340; p = 0.001) and the ratio of the anterolateral condyle and lateral condyle (ALC-LC) (r = 0.309; p = 0.014). The PFA-AEA angle was also significantly correlated with the ratio of the bianterior condyle (r = 0.319; p = 0.008), the AEA-PCL angle (r = 0.231; p = 0.031), and the ratio of ALC-LC (r = 0.261; p = 0.034). In addition, the bianterior condyle ratio showed a significant correlation with the biposterior condyle ratio (r = -0.324; p = 0.027) and the AEA-PCL angle (r = 0.342; p = 0.021). Conclusion Increased femoral torsion correlated with a prominent anterolateral condyle and a shorter posterolateral condyle compared with the medial condyle. The deformities of the anterior and posterior condyles are combined deformities rather than being isolated and individual deformities in patients with trochlear dysplasia and patella instability. Cite this article: Bone Joint J 2020;102-B(7):868–873.

Differences in Trochlear Morphology from Native Using a Femoral Component Interfaced with an Anatomical Patellar Prosthesis in Kinematic Alignment and Mechanical Alignment

2020 ◽  
Author(s):  
Maury L. Hull ◽  
Stephen M. Howell
Keyword(s):  
Computed Tomography ◽  
Total Knee Arthroplasty ◽  
Femoral Component ◽  
Three Dimensional ◽  
Kinematic Alignment ◽  
Trochlear Groove ◽  
Mechanical Alignment ◽  
Arc Length ◽  
Sulcus Angle ◽  
Total Knee

AbstractPatellofemoral complications following total knee arthroplasty can be traced in part to alignment of the femoral component. Kinematic alignment (KA) and mechanical alignment (MA) use the same femoral component but align the component differently. Our objective was to determine differences in trochlear morphology from native for a femoral component interfaced with an anatomical patellar prosthesis in KA and MA. Ten three-dimensional femur-cartilage models were created by combining computed tomography and laser scans of native human cadaveric femurs free of skeletal abnormalities. The femoral component was positioned using KA and MA. Measurements of the prosthetic and native trochlea were made along the arc length of the native trochlear groove and differences from native were computed for the medial-lateral and radial locations of the groove and sulcus angle. Mean medial-lateral locations of the prosthetic groove were within 1.5 and 3.5 mm of native for KA and MA, respectively. Mean radial locations of the prosthetic groove were as large as 5 mm less than native for KA and differences were greater for MA. Sulcus angles of the prosthetic trochlea were 10 degrees steeper proximally, and 10 degrees flatter distally than native for both KA and MA. Largest differences from native occurred for radial locations and sulcus angles for both KA and MA. The consistency of these results with those of other fundamentally different designs which use a modified dome (i.e., sombrero hat) patellar prosthesis highlights the need to reassess the design of the prosthetic trochlea on the part of multiple manufacturers worldwide.

A Novel Concept for Surgical Management of a Traumatic Comminuted Cricoid Fracture

2021 ◽  
pp. 014556132110405
Author(s):  
Tsuyoshi Morisaki ◽  
Takahiro Fukuhara ◽  
Hiroaki Ehara ◽  
Hideyuki Kataoka ◽  
Satoshi Koyama ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Surgical Treatment ◽  
Anterior Part ◽  
Posterior Part ◽  
Internal Diameter ◽  
Computed Tomography Scan ◽  
Correct Position ◽  
Respiratory Discomfort ◽  
Novel Concept ◽  
Tomography Scan

The cricoid plays 2 key roles: phonation and maintenance of the airway frame, both of which are lost in cases of comminuted cricoid fractures. The management of these 2 functions becomes a challenge in planning surgical treatment. We report the treatment course in a case of traumatic comminuted cricoid fracture that was resolved with good airway and phonatory functions. A 25-year-old man fell down the stairs and complained of respiratory discomfort and hoarseness of voice. A computed tomography scan showed comminuted cricoid fracture; therefore, surgery was performed to restore the patient’s airway and phonation functions. We found that the airway was maintained by the anterior part and that the phonation depended on the posterior part of the cricoid. This novel concept helped clarify the treatment goal in this case of comminuted cricoid fractures. Furthermore, it is important that the anterior part of the cricoid is reconstructed with sufficient internal diameter, while the posterior part of the cricoid is reconstructed in the correct position.

Fine structure of the rectal papillae of the oriental fruuit fly, Dacus dorsalis Hendel (Tephritidae, Diptera Insecta)

1990 ◽  
Vol 48 (3) ◽  
pp. 498-499
Author(s):  
Len Wen-Yung ◽  
Mei-Jung Lin
Keyword(s):  
Fine Structure ◽  
Cell Membrane ◽  
Intercellular Space ◽  
Anterior Part ◽  
Apical Cell ◽  
Posterior Part ◽  
Apical Cell Membrane ◽  
Dacus Dorsalis ◽  
Radial Cell ◽  
Circular Base

Four cone-shaped rectal papillae locate at the anterior part of the rectum in Dacus dorsalis fly. The circular base of the papilla protrudes into the haemolymph (Fig. 1,2) and the rest cone-shaped tip (Fig. 2) inserts in the rectal lumen. The base is surrounded with the cuticle (Fig. 5). The internal structure of the rectal papilla (Fig. 3) comprises of the cortex with the columnar epithelial cells and a rod-shaped medulla. Between them, there is the infundibular space and many trabeculae connect each other. Several tracheae insert into the papilla through the top of the medulla, then run into the cortical epithelium and locate in the intercellular space. The intercellular sinuses distribute in the posterior part of the rectal papilla.The cortex of the base divides into about thirty segments. Between segments there is a radial cell (Fig. 4). Under the cuticle, the apical cell membrane of the cortical epithelium is folded into a regular border of leaflets (Fig. 5).

scholarly journals The genus Gennadas (Benthesicymidae: Decapoda): morphology of copulatory characters, phylogeny and coevolution of genital structures

2017 ◽  
Vol 4 (12) ◽  
pp. 171288 ◽  
Author(s):  
Alexander L. Vereshchaka ◽  
Anastasia A. Lunina ◽  
Jørgen Olesen
Keyword(s):  
New Species ◽  
Anterior Part ◽  
Phylogenetic Analyses ◽  
Posterior Part ◽  
Key To Species ◽  
Internal Part ◽  
Species Groups ◽  
Aristaeomorpha Foliacea ◽  
External Part ◽  
Scanning Electron

Species within Gennadas differ from each other largely only in male (petasma) and female (thelycum) copulatory characters, which were restudied in scanning electron microscopy and used as a basis for phylogenetic analyses. Twenty-six petasma characters and 49 thelycum characters were identified. All 16 recognized species of Gennadas and Aristaeomorpha foliacea (outgroup) were included as terminals. Four robust monophyletic clades were retrieved, described and diagnosed as new species groups. The thelycum characters had greater impact on tree topology and supported deeper nodes than did the petasma characters. We hypothesize that features of the thelycum evolved first followed by aspects of the petasma. Relatively more conservative characters include parts of the sternites of the thelycum and of the petasma, while the scuti and protuberances on the thelycum and the shape and subdivisions of the petasma lobes are evolutionarily plastic. We identified two groups of copulatory characters, which are likely coupled functionally and interlinked evolutionarily: (i) the external part of the petasma and the posterior part of the thelycum and (ii) the internal part of the petasma and anterior part of the thelycum. We reconstruct possible mating position during copulation for each of the new species groups presented here. We also present an updated key to genera of Benthesicymidae and key to species of Gennadas .

scholarly journals Evaluation of the Effect of the Sulcus Angle and Lateral to Medial Facet Ratio of the Patellar Groove on Patella Tracking in Aging Subjects with Stable Knee Joint

2018 ◽  
Vol 2018 ◽  
pp. 1-5
Author(s):  
Jianghui Qin ◽  
Dongyang Chen ◽  
Zhihong Xu ◽  
Dongquan Shi ◽  
Jin Dai ◽  
...  
Keyword(s):  
Lower Limb ◽  
Lateral Displacement ◽  
Three Dimensional ◽  
Trochlear Groove ◽  
Patellar Tilt ◽  
Sulcus Angle ◽  
Lateral Tilt ◽  
Computed Tomography Images ◽  
Three Dimensional Models ◽  
Patella Tracking

Purpose.To determine whether the sulcus angle and the lateral to medial facet ratio correlate with patella lateral displacement and tilt in patients without patella instability.Methods.Computed tomography images of the lower limb of 64 patients without known arthropathy were collected. Three-dimensional models of the lower limb with a unified coordinate system were rebuilt by using Mimics software. The sulcus angle, lateral to medial facet ratio, lateral trochlear inclination of the patellar groove, tibial tuberosity-trochlear groove (TT-TG) distance, bisect offset index, and lateral tilt of the patella were measured. Pearson’s correlation test was used to determine the relationship between the aforementioned parameters.Results.Data from 51 patients were analyzed. The sulcus angle was negatively correlated with lateral tilt inclination (p<0.001,r=0.8406) and positively correlated with the bisect offset index (p=0.003,r=0.634) and patellar tilt (p=0.03,r=0.551); the lateral to medial facet ratio was positively correlated with TT-TG distance (p=0.003,r=0.643) and bisect offset index (p=0.026,r=0.559).Conclusion.The sulcus angle and lateral to medial facet ratio of the patellar groove can influence patella tracking in patients with stable knee joints.

Interacting functions of snail, twist and huckebein during the early development of germ layers in Drosophila

Development ◽  
1994 ◽  
Vol 120 (5) ◽  
pp. 1137-1150 ◽  
Author(s):  
R. Reuter ◽  
M. Leptin
Keyword(s):  
Transcription Factors ◽  
Digestive Tract ◽  
Early Development ◽  
Target Genes ◽  
Anterior Part ◽  
Posterior Part ◽  
Germ Layers ◽  
Mesoderm Development ◽  
Ventral Furrow

Two zygotic genes, snail (sna) and twist (twi), are required for mesoderm development, which begins with the formation of the ventral furrow. Both twi and sna are expressed ventrally in the blastoderm, encode transcription factors and promote the invagination of the ventral furrow by activating or repressing appropriate target genes. However, sna and twi alone do not define the position of the ventral furrow, since they are also expressed in ventral cells that do not invaginate. We show that huckebein (hkb) sets the anterior and the posterior borders of the ventral furrow, but acts by different modes of regulation. In the posterior part of the blastoderm, hkb represses the expression of sna in the endodermal primordium (which we suggest to be adjacent to the mesodermal primordium). In the anterior part, hkb antagonizes the activation of target genes by twi and sna. Here, bicoid permits the co-expression of hkb, sna and twi, which are all required for the development of the anterior digestive tract. We suggest that mesodermal fate is determined where sna and twi but not hkb are expressed. Anteriorly hkb together with sna determines endodermal fate, and hkb together with sna and twi are required for foregut development.

Sign in / Sign up

Export Citation Format

Share Document