Design and Evaluation of Chronomodulated Drug Delivery of Tramadol Hydrochloride

Drug Research ◽  
2017 ◽  
Vol 68 (03) ◽  
pp. 174-180 ◽  
Author(s):  
Thota Alekya ◽  
Dudhipala Narendar ◽  
Donthi Mahipal ◽  
Narala Arjun ◽  
Banala Nagaraj
Keyword(s):  
Rheumatoid Arthritis ◽  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Phosphate Buffer ◽  
Lag Time ◽  
Physical Parameters ◽  
Tramadol Hydrochloride ◽  
Eudragit S100

AbstractRheumatoid arthritis is an auto immune disease which requires chronotherapy as it occurs during early morning. Tramadol hydrochloride (TH) is an analgesic drug, used to treat rheumatoid arthritis. The aim of the present investigation was to develop chronomodulated drug delivery system of tramadol hydrochloride such that it releases the drug early in the morning, during which the symptoms of rheumatoid arthritis worsen. To develop chronomodulated drug delivery system of TH, initially core tablets of TH were prepared using three different supradisintegrants followed by coating with pH dependent polymer of Eudragit S100. The prepared core tablets are evaluated for physical parameters and an optimal system was identified. Further, coating composition of Eudragit S100 was optimized and coating tablets of TH was prepared. The prepared coated tablets were evaluated for weight variation, hardness, drug content and in vitro release studies in 0.1N HCl, pH 6.8 phosphate buffer and pH 7.4 phosphate buffer. Formulation with 7.5% of coating solution (ES2) had shown a significant drug release after a lag time of 3 h (in pH 6.8 medium), 6 h (in pH 6.8 medium) and 8 h (in pH 7.4 medium), respectively. DSC studies revealed that no interaction between core and coated materials with drug was observed. Thus, chronomodulated drug delivery system of TH was formulated and assuming that if a tablet is administered around 9 pm to 10 pm, the drug release starts after a lag time of 6 h i. e., around 3am to 4 am.

Formulation and Evaluation of Modified Pulsincap as Pulsatile Drug Delivery System for Treatment of Rheumatoid Arthritis

2016 ◽  
Vol 9 (5) ◽  
pp. 3476-3487
Author(s):  
Chavda D Hiral ◽  
Sonpal N Rakshit ◽  
Paresh Prajapati A ◽  
Madhabhai M Patel
Keyword(s):  
Rheumatoid Arthritis ◽  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Phosphate Buffer ◽  
Lag Time ◽  
Contour Plot ◽  
Independent Variables ◽  
Pulsatile Drug Delivery

The aim of the present study was to design and evaluate a modified pulsincap pulsatile drug delivery system of etodolac for treatment of rheumatoid arthritis. Capsule body was made water insoluble by cross linking with formaldehyde vapour. It was filled with drug, osmogen NaCl and super disintegrant sodium starch glycolate to expel the drug after predetermined lag time. A hydro gel plug made of HPMC K4M was placed in the capsule body to achieve desired drug release after lag time for chronotherapy of rheumatoid arthritis. Untreated cap was then fitted to the treated body was sealed. Entire unit was coated with 5% Eudragit S-100 to prevent variable gastric emptying. A 32 full factorial design was used for optimization in which concentration ratio of NaCl and SSG (X1), and the weight of hydrogel plug (X2) were selected as independent variables while lag time and t90% were taken as dependent variables. FTIR and DSC studies confirmed drug excipient compatibility. Developed formulation was evaluated for in-vitro drug release in pH 1.2, phosphate buffer pH 6.8 and phosphate buffer pH 7.4. Statistical analysis confirmed the significance of selected independent variables. Response surface plot and contour plot indicate augmentation of the line toward the weight of hydrogel plug factor indicating greater significance. Formulation with highest desirability containing 34.4 mg of SSG, 137.6 mg of NaCl and 48 mg of HPMC K4M plug was selected as an optimized formulation as it provided the desired lag time of 6 hours and t90% of about 477 mins. Accelerated stability study performed on optimized formulation suggested stable and viable formulation. A stable, efficient formulation modified pulsincap of Etodolac as a pulsatile drug delivery system was developed with proposed increased patient compliance and improved dosage form efficiency.

Development and Evaluation of Floating Pulsatile Drug Delivery System Using Meloxicam

2017 ◽  
Vol 7 (04) ◽  
Author(s):  
ShirishaG. Suddala ◽  
S. K. Sahoo ◽  
M. R. Yamsani
Keyword(s):  
Rheumatoid Arthritis ◽  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Lag Time ◽  
Oral Dosage ◽  
Lag Phase ◽  
Pulsatile Drug Delivery

Objective: The objective of this research work was to develop and evaluate the floating– pulsatile drug delivery system (FPDDS) of meloxicam intended for Chrono pharmacotherapy of rheumatoid arthritis. Methods: The system consisting of drug containing core, coated with hydrophilic erodible polymer, which is responsible for a lag phase for pulsatile release, top cover buoyant layer was prepared with HPMC K4M and sodium bicarbonate, provides buoyancy to increase retention of the oral dosage form in the stomach. Meloxicam is a COX-2 inhibitor used to treat joint diseases such as osteoarthritis and rheumatoid arthritis. For rheumatoid arthritis Chrono pharmacotherapy has been recommended to ensure that the highest blood levels of the drug coincide with peak pain and stiffness. Result and discussion: The prepared tablets were characterized and found to exhibit satisfactory physico-chemical characteristics. Hence, the main objective of present work is to formulate FPDDS of meloxicam in order to achieve drug release after pre-determined lag phase. Developed formulations were evaluated for in vitro drug release studies, water uptake and erosion studies, floating behaviour and in vivo radiology studies. Results showed that a certain lag time before drug release which was due to the erosion of the hydrophilic erodible polymer. The lag time clearly depends on the type and amount of hydrophilic polymer which was applied on the inner cores. Floating time and floating lag time was controlled by quantity and composition of buoyant layer. In vivo radiology studies point out the capability of the system of longer residence time of the tablets in the gastric region and releasing the drug after a programmed lag time. Conclusion: The optimized formulation of the developed system provided a lag phase while showing the gastroretension followed by pulsatile drug release that would be beneficial for chronotherapy of rheumatoid arthritis and osteoarthritis.

Formulation and Evaluation of Gastro Retentive Drug Delivery System for Ofloxacin

2009 ◽  
Vol 2 (1) ◽  
pp. 428-434
Author(s):  
Dumpeti Janardhan ◽  
Sreekanth Joginapally ◽  
Bharat V. ◽  
Rama Subramaniyan P.
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Sodium Bicarbonate ◽  
Drug Delivery System ◽  
Delivery System ◽  
Release Kinetics ◽  
Methyl Cellulose ◽  
Alkaline Media ◽  
In Vitro Dissolution ◽  
Physical Parameters

The purpose of this investigation was to prepare a gastroretentive drug delivery system of Ofloxacin. Ofloxacin is a fluoroquinolone antibacterial which acts by inhibiting the topoisomerase enzyme which is essential in the reproduction of the bacterial DNA. It is highly soluble in acidic media and precipitates in alkaline media thereby losing its solubility. Hence, a gastroretentive system was developed to enhance the bioavailability by retaining it in the acidic environment of the stomach. Different formulations were formulated using various concentrations of hydroxy propyl methyl cellulose, sodium carboxy methyl cellulose, sodium bicarbonate and citric acid. The formulations were evaluated for quality control tests and all the physical parameters evaluated are within the acceptable limits of Indian Pharmacopoeia. All the formulations were subjected to in-vitro dissolution studies and compared with the marketed formulation. The floating lag time was below 15 seconds for all the formulations except F1 and F2. The floating duration was found to be more than 24 hours in all except F1, F2 and F10. Formulations F7 and F8 were used to study the effect of sodium bicarbonate and formulations F9 and F10 for the effect of hardness on the drug release. Drug release kinetics was studied for prepared formulations and optimized formulation F5 was found to follow zero order kinetics with r2 =0.993. The statistical analysis of the parameters of dissolution data obtained before and after storage for 3 months at 25°C/ 60%RH and 40°C/75%RH showed no significant change indicating the two dissolution profiles were similar.

Study of pH-Responsive and Polyethylene Glycol-Modified Doxorubicin-Loaded Mesoporous Silica Nanoparticles for Drug Delivery

2020 ◽  
Vol 20 (10) ◽  
pp. 5997-6006
Author(s):  
Yujie Qin ◽  
Xiaoqian Shan ◽  
Yu Han ◽  
Hang Jin ◽  
Ying Gao
Keyword(s):  
Drug Delivery ◽  
Polyethylene Glycol ◽  
Drug Release ◽  
Mesoporous Silica ◽  
Drug Delivery System ◽  
Delivery System ◽  
Phosphate Buffer ◽  
Drug Loading ◽  
Phosphate Buffer Solution ◽  
Tumor Cell Death

Tumor-targeted drug delivery systems represent challenging and widely investigated strategies to enhance cancer chemotherapy. In this study, we introduce a novel high-hydrophilic mesoporous silica nanoparticle system with a pH-sensitive drug release. The resultant composite nanoparticles appear as spheres of uniform size (450±25 nm) with a porous structure, which enables a high drug-loading ratio. Through modification of chitosan and polyethylene glycol monomethyl ether, the modified mesoporous silica was non-toxic to normal cells, but effective at inducing tumor cell death. With regard to the characteristics of drug release, the modified mesoporous silica clearly displayed a pH-stimulated release of the model drug doxorubicin hydrochloride in an acidic phosphate buffer solution (pH 4.0 and 6.0). The release was much greater than that observed in neutral or alkaline phosphate buffer solutions (pH 7.3 and 8.0). Furthermore, the release behavior was in accordance with the Higuchi model, indicating that this modified mesoporous silica drug delivery system can exhibit controlled release. The above results imply that the modified mesoporous silica is an effective drug delivery system for cancer therapy.

scholarly journals NOVEL FLOATING AGENT SACCHAROMYCES BOULARDII FORMULATION BASED FLOATING DRUG DELIVERY SYSTEM

2021 ◽  
pp. 223-229
Author(s):  
SUVARNA CHITTAM ◽  
ASHOK BHOSALE
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Calcium Hydroxide ◽  
Drug Delivery System ◽  
Delivery System ◽  
Lag Time ◽  
Saccharomyces Boulardii ◽  
Floating Drug Delivery ◽  
Floating Tablet ◽  
Floating Drug Delivery System

Objective: The objective is to design and optimize a floating tablet of furosemide using a novel floating agent Saccharomyces boulardii. Methods: In this study floating tablet based on principle of combination of floating and swelling prepared by direct compression technique. Saccharomyces boulardii probiotics preparation is used as a floating agent due to its bloating property i.e. production of CO2 gas and hydrophilic polymer HPMC E LV 15 used as swellable polymer. Furosemide is a BCS class IV drug selected as model drug which shows pH dependent solubility and permeability and it is better absorbed from the gastric region, hence to improve dissolution and residence at absorption site of such drug, floating drug delivery system is needed. Calcium hydroxide used as pH modifier which increase rate of dissolution of furosemide and also maintain integrity of tablet matrix. Formulation designed and developed using central composite design response surface methodology technique, so as to explore the effect of formulation variables such as amount of Saccharomyces boulardii preparation and calcium hydroxide on floating lag time and % drug release after 12h. Results: The numerical and graphical optimization technique were used to choose the optimal formulation. Floating lag time was found to be 12.6 min and 88.18% drug release for the optimized formulation. In vivo buoyancy studies depicted that formulation stay more then 6h in stomach. Conclusion: Study indicate that Saccharomyces boulardii is a promising floating agent, and the formulation containing this novel floating agent is suitable for gastro retention and it increases bioavailability of furosemide.

scholarly journals Formulation and Development of Gastroretentive Drug Delivery System of Efavirenz

2019 ◽  
Vol 11 (05) ◽  
Author(s):  
Monica RP Rao ◽  
Pooja B. Karanjkar
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Solid Dispersion ◽  
In Vitro Release ◽  
Lag Time ◽  
Intrinsic Dissolution ◽  
Drug Content

Efavirenz, a non-nucleotide reverse transcriptase inhibitor is an important drug for treating patients with Human Immunodeficiency Virus infections. It belongs to BCS class II have low solubility and poor intrinsic dissolution rate. It is highly basic (pKa 10.2) which makes it suitable candidate for floating dosage form for continuous delivery in stomach.The study was aimed to improve the solubility by solid dispersion technique.Saturation solubility study and drug content were evaluated for solid dispersion preparation. Saturation solubility shows 8 fold increases in 0.1 N HCL compared to plain drug and drug content was found to be between 95%-102%. Further effervescent floating gastroretentive drug delivery system was prepared by 32 full factorial design with independent variables i.e., concentration of HPMC K100 as matrix forming agent and citric acid as gas generating agent. Lag time, floating time, percent drug release were studied as responses. The optimized batch exhibited floating lag time of 40 sec and the in vitro release studies showed 89.5% drug release in 9 h and tablet remained floating for greater than 8 h. The study thus demonstrated that solubility is increased by solid dispersion technique and floating delivery systems may increase solubility and bioavailability of Efavirenz.

scholarly journals FORMULATION AND EVALUATION OF PULSATILE DRUG DELIVERY SYSTEM OF SALBUTAMOL SULFATE FOR THE CHRONOTHERAPY OF ASTHMA

2018 ◽  
Vol 11 (9) ◽  
pp. 305
Author(s):  
Chiranjibi Adhikari ◽  
Gururaj S Kulkarni ◽  
Shivakumar Swamy
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Lag Time ◽  
Release Profile ◽  
Salbutamol Sulfate ◽  
Pulsatile Drug Delivery ◽  
Core Tablet

Objective: The main objective of the present study was to design and evaluate a time-controlled single unit oral pulsatile drug delivery system containing salbutamol sulfate for the prevention of nocturnal asthma attacks.Methods: Drug containing core tablets (C1-C10) with different composition of superdisintegrants such as sodium starch glycolate, croscarmellose sodium, and crospovidone were prepared by direct compression technique. The fast disintegrating core tablet formulation was selected, and press-coated tablets (P1-P11) were prepared with different compositions of hydrophobic and hydrophilic polymers: Ethylcellulose-20 (EC-20), hydroxypropyl methylcellulose K4M, and low substituted hydroxypropyl cellulose (L-HPC LH11). The coating polymers were selected and quantified based on in vitro lag time and drug release profile in simulated gastric and intestinal fluids.Results: Formulation C10 with 7.5% crospovidone showed least disintegrating time, i.e., 0.31 min and was selected as the best immediate release core tablet. The press-coated tablet formulation P11 having 360 mg barrier layer of EC-20 and L-HPC LH11 in ratio 14:1 over the core tablet C10 showed rapid and complete drug release nearly after 6 h lag time. Accelerated stability studies of the optimized formulation P11 indicated no significant difference in release profile after a period of 6 months.Conclusion: The in vitro dissolution study showed that lag time before drug release was highly affected by the coating level and nature of coating polymer used. Time-controlled pulsatile release tablets can be prepared using press-coating techniques.

scholarly journals Formulation and In vitro Characterization of Hydrochlorothiazide Gastroretentive Floating Drug Delivery System

2016 ◽  
Vol 14 (2) ◽  
pp. 163-170
Author(s):  
Md Asif Hasan ◽  
Sabiha Sultana ◽  
Sabiha Sultana ◽  
Md Masud Kaisar Bhuiyan ◽  
Md Selim Reza ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Lag Time ◽  
Content Uniformity ◽  
Floating Drug Delivery ◽  
Study Results ◽  
Floating Drug Delivery System

The purpose of the study was to develop and optimize floating bioadhesive gastroretentive drug delivery system (GRDDS) exhibiting a unique combination of floatation and bioadhesion to prolong residence in the stomach, using hydrochlorothiazide (HCTZ) as a model drug. Formulated matrix tablets were prepared by direct compression method with two different rate controlling polymer HPMC K4M and Carbopol 971. The formulated tablets were evaluated for physical characterization, floating lag time, swelling index and drug content uniformity. The drug release study was carried out in 0.1N HCl as the medium (pH 1.2) for 8 hours using USP type II dissolution apparatus and investigated the effects of polymers on the drug release profile. In vitro buoyancy study results found to be 10–33 sec and >8 h, floating lag time and total floating time respectively. Simulated drug release pattern in different kinetic models of Korsmeyer-Peppas release suggests that the mechanism controlling of the drug release from all formulations was the anomalous non-Fickian or anomalous release. Polymer with lower viscosity (HMPC K4M) was found to be beneficial than higher viscosity polymer (Carbopol 971) in improving the release properties of gastric floating drug delivery system. Incorporation of Carbopol in formulation also helped in maintaining buoyancy of system with desirable drug release. Further study is necessary in case of in vitro- in vivo relationship, but this study will ready to lend a hand to future scientists working in this field to successfully exploit the potential of this drug delivery system for the advantage of mankind.Dhaka Univ. J. Pharm. Sci. 14(2): 163-170, 2015 (December)

scholarly journals Sustain Release Formulation and Evaluation of Ofloxacin Floating Delivery System

2014 ◽  
Vol 31 ◽  
pp. 69-83
Author(s):  
Anand J. Patel ◽  
Deep R. Naik ◽  
Jignesh P. Raval
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Fickian Diffusion ◽  
Physical Parameters ◽  
Release Mechanisms ◽  
Floating Drug Delivery ◽  
Floating Drug Delivery System

Floating tablets has been accepted as a process to achieve controlled drug delivery by prolonging the residence time of the dosage form at the site of absorption, thereby improving and enhancing the bioavailability of drug. The objective of present study outlines the development and characterization the floating drug delivery system of Ofloxacin to enhance its bioavailability and therapeutic efficacy, using different grades of polymer along with effervescent agent sodium bicarbonate and citric acid. Ofloxacin is a synthetic chemotherapeutic second-generation antibiotic of the fluoroquinolone class. Different tablet formulations were formulated by wet granulation technique and were evaluated for physical parameters like Tablet Thickness, Hardness, % Friability, Weight variation, Content uniformity, In vitro buoyancy, Swelling index, In vitro dissolution study and drug release mechanisms. As the concentration of the polymer in the formulations increased the release of drug decreased. Hence it was considered as suitable candidate for formulation as floating drug delivery system. Different kinetic models were applied to drug release data in order to evaluate release mechanisms and kinetics. The optimized formula F4 showed better sustained drug release with good floating properties and fitted best to be Korsmeyer-Peppas model with R2 value of 0.9575. As the n value for the Korsmeyer- Peppas model was found be more than 0.5 it follows Non-Fickian diffusion mechanism. FTIR result showed that there is no drug excipients interaction.

scholarly journals FORMULATION AND EVALUATION OF GASTRORETENTIVE FLOATING TABLETS OF LAFUTIDINE

2018 ◽  
Vol 8 (5) ◽  
pp. 393-399
Author(s):  
Ramdas T. Dolas ◽  
Shalindra Sharma ◽  
Madhuraj Sharma
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Active Agent ◽  
Lag Time ◽  
In Vitro Dissolution ◽  
Wet Granulation ◽  
Floating Tablets

The purpose of this research was to develop a novel gastroretentive drug delivery system based on wet granulation technique for sustained delivery of active agent. Quick GI transit could result in incomplete drug release from the drug delivery system above the absorption zone leading to decreased efficacy of the administered dose and thus less patient compliance. Gastroretentive floating tablets, which was designed to provide the desired sustained and complete release of drug for prolonged period of time. Gastroretentive floating tablets of lafutidine were prepared by wet granulation technique using different concentrations of Gum Kondagagu, Gum olibanum and Locust bean Gum. The optimized formulation (LF14) exhibited 99.54% drug release in 12 hrs, while the buoyancy lag time was 33 sec. In-vitro drug release kinetics was found to follow both the Zero order and the possible mechanism of lafutidine release from the optimized formulation might be attributed to super case II transport mechanism. The Optimized formulation (LF14) showed no significant change in physical appearance, drug content, floating lag time, in vitro dissolution studies after 75%±5% RH at 40±20C relative humidity for 6 months. Keyword: Wet granulation, Floating lag Time, Gastroretentive, Lafutidine

Sign in / Sign up

Export Citation Format

Share Document