Plastic deformation mechanisms of ultrafine-grained copper in the temperature range of 4.2–300 K

2016 ◽  
Vol 42 (9) ◽  
pp. 825-835 ◽  
Author(s):  
N. V. Isaev ◽  
T. V. Grigorova ◽  
O. V. Mendiuk ◽  
O. A. Davydenko ◽  
S. S. Polishchuk ◽  
...  
Keyword(s):  
Plastic Deformation ◽  
Deformation Mechanisms ◽  
Temperature Range ◽  
Ultrafine Grained

Investigations on Microstructure Evolution and Deformation Behavior of Aged and Ultrafine Grained Al-Zn-Mg Alloy Subjected to Severe Plastic Deformation

2010 ◽  
Vol 667-669 ◽  
pp. 253-258
Author(s):  
Wei Ping Hu ◽  
Si Yuan Zhang ◽  
Xiao Yu He ◽  
Zhen Yang Liu ◽  
Rolf Berghammer ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Plastic Deformation ◽  
Grain Size ◽  
Severe Plastic Deformation ◽  
Microstructure Evolution ◽  
Deformation Behavior ◽  
Deformation Mechanisms ◽  
Mg Alloy ◽  
Ultrafine Grained

An aged Al-5Zn-1.6Mg alloy with fine η' precipitates was grain refined to ~100 nm grain size by severe plastic deformation (SPD). Microstructure evolution during SPD and mechanical behaviour after SPD of the alloy were characterized by electron microscopy and tensile, compression as well as nanoindentation tests. The influence of η' precipitates on microstructure and mechanical properties of ultrafine grained Al-Zn-Mg alloy is discussed with respect to their effect on dislocation configurations and deformation mechanisms during processing of the alloy.

scholarly journals Influence of Temperature and Plastic Strain on Deformation Mechanisms and Kink Band Formation in Homogenized HfNbTaTiZr

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 81
Author(s):  
Hans Chen ◽  
Theresa Hanemann ◽  
Sascha Seils ◽  
Daniel Schliephake ◽  
Aditya Srinivasan Tirunilai ◽  
...  
Keyword(s):  
Plastic Deformation ◽  
Plastic Strain ◽  
Kink Band ◽  
Deformation Mechanisms ◽  
Large Temperature ◽  
Plastic Strains ◽  
Compression Tests ◽  
Band Formation ◽  
Influence Of Temperature ◽  
Temperature Range

Due to its outstanding ductility over a large temperature range, equiatomic HfNbTaTiZr is well-suited for investigating the influence of temperature and plastic strain on deformation mechanisms in concentrated, body centered cubic solid solutions. For this purpose, compression tests in a temperature range from 77 up to 1073 K were performed and terminated at varying plastic strains for comparison of plastic deformation behavior. The microstructure and chemical homogeneity of a homogenized HfNbTaTiZr ingot were evaluated on different length scales. The compression tests reveal that test temperature significantly influences yield strength as well as work hardening behavior. Electron backscatter diffraction aids in shedding light on the acting deformation mechanisms at various temperatures and strains. It is revealed that kink band formation contributes to plastic deformation only in a certain temperature range. Additionally, the kink band misorientation angle distribution significantly differs at varying plastic strains.

In situ TEM measurement of activation volume in ultrafine grained gold

Nanoscale ◽  
2020 ◽  
Vol 12 (13) ◽  
pp. 7146-7158
Author(s):  
Saurabh Gupta ◽  
Sandra Stangebye ◽  
Katherine Jungjohann ◽  
Brad Boyce ◽  
Ting Zhu ◽  
...  
Keyword(s):  
Plastic Deformation ◽  
Activation Volume ◽  
Deformation Mechanisms ◽  
In Situ Tem ◽  
Ultrafine Grained ◽  
Volume Measurements

Quantitative in situ TEM true activation volume measurements in nanoscale specimens with simultaneous observations of plastic deformation mechanisms.

A comparative study of plastic deformation mechanisms in room-temperature and cryogenically deformed magnesium alloy AZ31

2021 ◽  
Vol 807 ◽  
pp. 140821
Author(s):  
Kai Zhang ◽  
Zhutao Shao ◽  
Christopher S. Daniel ◽  
Mark Turski ◽  
Catalin Pruncu ◽  
...  
Keyword(s):  
Plastic Deformation ◽  
Magnesium Alloy ◽  
Comparative Study ◽  
Room Temperature ◽  
Deformation Mechanisms ◽  
Alloy Az31 ◽  
Magnesium Alloy Az31

The New SPD Processing Trends to Fabricate Bulk Nanostructured Materials

2006 ◽  
Vol 114 ◽  
pp. 7-18 ◽  
Author(s):  
Ruslan Valiev
Keyword(s):  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Grain Refinement ◽  
Nanostructured Materials ◽  
Nanocrystalline Materials ◽  
Commercial Production ◽  
Materials Processing ◽  
Ultrafine Grained ◽  
Ultrafine Grained Materials ◽  
Bulk Nanocrystalline

During the last decade severe plastic deformation (SPD) has become a widely known method of materials processing used for fabrication of ultrafine-grained materials with attractive properties. Nowadays SPD processing is rapidly developing and is on the verge of a transition from lab-scale research to commercial production. This paper focuses on several new trends in the development of SPD techniques for effective grain refinement, including those for commercial alloys and presents new SPD processing routes to produce bulk nanocrystalline materials.

MULTI-SCALE FINITE ELEMENT SIMULATION OF SEVERE PLASTIC DEFORMATION

2009 ◽  
Vol 23 (06n07) ◽  
pp. 1621-1626
Author(s):  
HYOUNG SEOP KIM
Keyword(s):  
Plastic Deformation ◽  
Finite Element ◽  
Severe Plastic Deformation ◽  
Constitutive Model ◽  
Dislocation Cell ◽  
Ultrafine Grain ◽  
Angular Pressing ◽  
Element Simulation ◽  
Ultrafine Grain Size ◽  
Ultrafine Grained

The technique of severe plastic deformation (SPD) enables one to produce metals and alloys with an ultrafine grain size of about 100 nm and less. As the mechanical properties of such ultrafine grained materials are governed by the plastic deformation during the SPD process, the understanding of the stress and strain development in a workpiece is very important for optimizing the SPD process design and for microstructural control. The objectives of this work is to present a constitutive model based on the dislocation density and dislocation cell evolution for large plastic strains as applied to equal channel angular pressing (ECAP). This paper briefly introduces the constitutive model and presents the results obtained with this model for ECAP by the finite element method.

The Processing of Ultrafine-Grained Materials Using High-Pressure Torsion

2007 ◽  
Vol 558-559 ◽  
pp. 1283-1294 ◽  
Author(s):  
Cheng Xu ◽  
Z. Horita ◽  
Terence G. Langdon
Keyword(s):  
Plastic Deformation ◽  
Grain Size ◽  
High Pressure ◽  
High Pressure Torsion ◽  
Metallic Materials ◽  
Grain Sizes ◽  
Ultrafine Grained ◽  
Wide Range ◽  
Ultrafine Grained Materials ◽  
Thin Disks

It is now well-established that processing through the application of severe plastic deformation (SPD) leads to a significant reduction in the grain size of a wide range of metallic materials. This paper examines the fabrication of ultrafine-grained materials using high-pressure torsion (HPT) where this process is attractive because it leads to exceptional grain refinement with grain sizes that often lie in the nanometer or submicrometer ranges. Two aspects of HPT are examined. First, processing by HPT is usually confined to samples in the form of very thin disks but recent experiments demonstrate the potential for extending HPT also to bulk samples. Second, since the strains imposed in HPT vary with the distance from the center of the disk, it is important to examine the development of inhomogeneities in disk samples processed by HPT.

Reverse Plasticity in Nanoindentation

2007 ◽  
Vol 1049 ◽  
Author(s):  
Yongjiang Huang ◽  
Nursiani Indah Tjahyono ◽  
Jun Shen ◽  
Yu Lung Chiu
Keyword(s):  
Mechanical Properties ◽  
Plastic Deformation ◽  
Glass Transition ◽  
Single Crystal ◽  
Metallic Glasses ◽  
Deformation Mechanisms ◽  
Glass Transition Temperatures ◽  
Loading Rates ◽  
Nanoindentation Experiment ◽  
Properties Of Materials

AbstractThis paper summarises our recent cyclic nanoindentation experiment studies on a range of materials including single crystal and nanocrystalline copper, single crystal aluminium and bulk metallic glasses with different glass transition temperatures. The unloading and reloading processes of the nanoindentation curves have been analysed. The reverse plasticity will be discussed in the context of plastic deformation mechanisms involved. The effect of loading rates on the mechanical properties of materials upon cyclic loading will also be discussed.

Sign in / Sign up

Export Citation Format

Share Document