Forage canola (Brassica napus): spring-sown winter canola for biennial dual-purpose use in the high-rainfall zone of southern Australia

2015 ◽  
Vol 66 (4) ◽  
pp. 275 ◽  
Author(s):  
Annieka Paridaen ◽  
John A. Kirkegaard

European winter canola (Brassica napus L.) varieties adapted to the long, cool seasons in high-rainfall areas of southern Australia have recently been adopted as autumn-sown, grain-only and dual-purpose crops. A spring-sown winter canola could be used as a biennial dual-purpose crop, to provide additional forage for summer and autumn grazing before recovery to produce an oilseed crop. We report a series of field experiments demonstrating that European winter canola types have suitable phenological characteristics to allow for their use as biennial, spring-sown crops, providing significant forage (2.5–4 t ha–1) for grazing while remaining vegetative through summer and autumn, and recovering following vernalisation in winter to produce high seed yield (2.5–5.0 t ha–1). Sowing too early (September) in colder inland areas risked exposure of the crop to vernalising temperatures, causing the crop to bolt to flower in summer, whereas all crops sown from mid-October remained vegetative through summer. Crop stands thinned by 20–30% during summer, and this was exacerbated by grazing, but surviving stands of ~30 plants m–2 were sufficient to support high yields. Grazing had no effect on grain yield at one site, but reduced yield by 0.5 t ha–1 at a second site, although this was more than offset by the value of the grazed forage. The spring-sowing approach has potential to replace the existing forage rape–spring cereal sequence, or to add a further option to the existing autumn-sown winter canola in areas such as southern Victoria, where early autumn establishment can be problematic and spring-sown crops can better withstand pests and winter waterlogging, which limit yield of autumn-sown crops. Because these are the first known studies in Australia to investigate the use of spring-sown winter canola, further work is warranted to refine further the crop and grazing strategies to maximise productivity and profitability from this option.

2012 ◽  
Vol 63 (1) ◽  
pp. 17 ◽  
Author(s):  
Penny Riffkin ◽  
Trent Potter ◽  
Gavin Kearney

Area and production of canola (Brassica napus L.) in the High Rainfall Zone (HRZ) of southern Australia has increased significantly over the past decade. Varieties available to growers have not been bred specifically for the HRZ and are generally adapted to the drier regions of the cropping belt. Field experiments were conducted at Hamilton in south-west Victoria in 2005, 2006 and 2008 to identify canola traits and management suited to the HRZ of southern Australia. Nine varieties with different reported maturities (winter and spring types) were sown at either two times of sowing and/or under different nitrogen (N) fertiliser regimes. Dates of key phenological development were recorded, dry matter was determined at bud, flowering and maturity and grain yield and yield components were determined at harvest. Plant traits and climate data were assessed in relation to grain yield. Yields of the winter types were either significantly (P < 0.05) greater or not significantly less than the spring types in all 3 years and similar to those reported under experimental conditions in Europe. This was despite the winter types flowering up to 35 days later than the spring types and spring rainfall being approximately half that of the long-term average. In general, the winter types had greater early vigour, greater dry matter production at the bud, flowering and maturity stages and were taller than the spring types. Regression analysis showed positive relationships between grain yield and pod density and plant size (dry matter and plant height). Plant size was influenced by variety, time of sowing and N fertiliser application rates. Crops in the HRZ were able to sustain more seeds per pod at larger canopy sizes and pod densities than those achieved in the northern hemisphere. Despite the number of pods per g of dry matter at flowering being nearly double that reported in the UK, there was little apparent reduction in the number of seeds per pod. It is possible that higher solar radiation and warmer minimum temperatures in the HRZ of Australia provide conditions more favourable for growth before, and during grainfill. This indicates that different dry matter production and yield component targets may be appropriate for canola in this environment especially in more typical seasons. It is likely that growers will need to sow new, later maturing varieties earlier and with higher rates of N fertiliser than is current practice in Australia. This study indicates that winter types may have the potential to provide improvements to the yield of canola in the HRZ either through the direct importation of varieties from overseas or through the identification and incorporation of desired traits into existing material. It is recommended that a wider range of germplasm be assessed over a greater geographical area to identify traits and management practices to optimise phenology and canopy structure. This information can be used to help inform breeders on crop improvement priorities as well providing tailored management practices to maximise grain yields for this environment.


2016 ◽  
Vol 67 (4) ◽  
pp. 359 ◽  
Author(s):  
Penny Riffkin ◽  
Brendan Christy ◽  
Garry O'Leary ◽  
Debra Partington

In the High Rainfall Zone (HRZ) of southern Australia, long-season winter canola types have been commercially available only since 2011. Experiments in this region show that these varieties can provide improvements in grain yield over spring types of >20% because of their ability to make better use of the longer growing season. However, within this longer crop duration, the optimum length and timings of the critical growth phases to maximise grain production are unknown. Data from eight field experiments conducted between 2010 and 2014 at Hamilton, in the HRZ of south-western Victoria, were analysed to determine whether different phases within the crop’s life cycle vary in their contribution to grain yield and, if so, how this is influenced by climatic conditions. The dataset provided 536 genotype–environment–management combinations including 60 varieties ranging in total crop duration from 186 to 236 days. Over the 5 years, seasons were highly variable with annual rainfall ranging between 479 and 981 mm and spring rainfall (September–November) between 84 and 199 mm. The range of crop maturity types (i.e. winter and spring types) and environmental conditions provided a wide spread in growth, development and grain yield. The analysis showed a positive association between longer duration from flowering to maturity and grain yield, and showed that the duration was influenced by both environmental and genetic factors. Pre-flowering reserves made an important contribution to grain yield, and remobilisation of reserves from the pre-flowering period was greatest for winter types, presumably due to less favourable conditions for growth during grain-filling. Optimising flowering to produce sufficient pre-flowering reserves for remobilisation while ensuring that environmental conditions post-flowering are such that the grain-filling duration is maximised may provide a strategy to increase yields in this environment.


2012 ◽  
Vol 92 (1) ◽  
pp. 97-107
Author(s):  
Juliana J. Soroka ◽  
Larry F. Grenkow

Soroka, J. J. and L. F. Grenkow. 2012. When is fall feeding by flea beetles ( Phyllotreta spp., Coleoptera: Chrysomelidae) on canola ( Brassica napus L.) a problem? Can. J. Plant Sci. 92: 97–107. Two cultivars of Brassica napus canola were seeded in mid-May and early June in three field experiments in each of 3 yr near Saskatoon, Saskatchewan, to determine the effects of late-season flea beetle feeding on seed yields. In the first experiment, canola was sprayed with insecticide late in the summer to eliminate naturally-infesting flea beetles. In the second, 1×1×1.5 m screen cages were placed over early- and late-seeded canola at flowering and infested with flea beetles as canola matured. In the third investigation, sleeve cages were placed over individual plants and infested with 100 flea beetles. Flea beetles had no detrimental effects on early-seeded canola in any experiment, but did affect seed yields of late-seeded plots in some trials. Over two cultivars in 1 year, late-seeded plants in cube cages infested with about 350 flea beetles per plant when lower pods were turning from translucent to green in colour reduced yield by 241 kg ha−1 over control yields. Seed weights in these late-seeded plots were decreased from 2.68 g per 1000 seeds in uninfested cages to 2.44 g per 1000 seeds in infested cages. Populations of 100 flea beetles per plant in sleeve cages had no effect on harvest parameters in any seeding date or year.


Plants ◽  
2020 ◽  
Vol 9 (9) ◽  
pp. 1145 ◽  
Author(s):  
Ihsan Elahi Zaheer ◽  
Shafaqat Ali ◽  
Muhammad Hamzah Saleem ◽  
Muhammad Arslan Ashraf ◽  
Qurban Ali ◽  
...  

Contamination of soil and water with metals and metalloids is one of the most serious problems worldwide due to a lack of a healthy diet and food scarcity. Moreover, the cultivation of oilseed crops such as rapeseed (Brassica napus L.) with tannery wastewater could contain a large amount of toxic heavy metals [e.g., chromium (Cr)], which ultimately reduce its yield and directly influence oilseed quality. To overcome Cr toxicity in B. napus, a pot experiment was conducted to enhance plant growth and biomass by using newly introduced role of micronutrient-amino chelates [Zinc-lysine (Zn-lys)], which was irrigated with different levels [0% (control), 33%, 66%, and 100%] of tannery wastewater. According to the results of present findings, very high content of Cr in the wastewater directly affected plant growth and composition as well as gas exchange parameters, while boosting up the production of reactive oxygen species (ROS) and induced oxidative damage in the roots and leaves of B. napus. However, activities of antioxidants initially increased (33% of wastewater), but further addition of tannery wastewater in the soil caused a decrease in antioxidant enzymes, which also manifested by Zn content, while the conscious addition of wastewater significantly increased Cr content in the roots and shoots of B. napus. To reduce Cr toxicity in B. napus plants, exogenous supplementation of Zn-lys (10 mg/L) plays an effective role in increasing morpho-physiological attributes of B. napus and also reduces the oxidative stress in the roots and leaves of the oilseed crop (B. napus). Enhancement in different growth attributes was directly linked with increased in antioxidative enzymes while decreased uptake and accumulation of Cr content in B. napus when cultivated in wastewater with the application of Zn-lys. Zn-lys, therefore, plays a protective role in reducing the Cr toxicity of B. napus through an increase in plant growth and lowering of Cr uptake in various plant organs. However, further studies at field levels are required to explore the mechanisms of Zn–lys mediated reduction of Cr and possibly other heavy metal toxicity in plants.


2007 ◽  
Vol 47 (8) ◽  
pp. 984 ◽  
Author(s):  
R. F. Brennan ◽  
M. D. A. Bolland

The effect of fertiliser phosphorus (P) and nitrogen (N) on seed (grain) yield and concentration of oil and protein in grain of canola (oil-seed rape; Brassica napus L.) was measured in two field experiments undertaken at eight sites from 1993–2005 in south-western Australia, on soils deficient in P and N. Six rates of P (0–40 kg P/ha as single superphosphate) and four rates of N (0–138 kg N/ha as urea) were applied. Significant grain yield increases (responses) to applied P occurred in both experiments and these responses increased as rates of applied N increased. For grain production, the P × N interaction was significant in all eight years and locations of the two experiments. Application of P had no effect on concentration of oil and protein in grain. Application of N always decreased the concentration of oil and increased the concentration of protein in grain. For canola grain production in the region, responses to applied N always occur whereas responses to applied P are rare, but if soil P testing indicates likely P deficiency, both P and N fertiliser need to be applied.


2014 ◽  
Vol 94 (8) ◽  
pp. 1461-1469 ◽  
Author(s):  
Yun Ren ◽  
Jianfang Zhu ◽  
Nazim Hussain ◽  
Shanlin Ma ◽  
Genru Ye ◽  
...  

Ren, Y., Zhu, J., Hussain, N., Ma, S., Ye, G., Zhang, D. and Hua, S. 2014. Seedling age and quality upon transplanting affect seed yield of canola (Brassica napus L.). Can. J. Plant Sci. 94: 1461–1469. Seedling quality is an essential indicator for seed yield in canola, which is affected by many factors, including seedling age. Two field experiments were conducted to compare canola seedling quality and seed yield on 30-, 35-, 40-, 45-, 50-, 55-, and 60-d-old seedlings in 2011 and 2012. The relationship between seedling quality traits and seed yield of different seedling ages was also analyzed. Results revealed that the highest seed yield obtained from 40-d-old seedlings was attributed to more branches and siliques per plant. The negative effect of young seedlings (30-d-old) on seed yield was greater than that of old seedlings (60-d-old). The reduction rates in seed yield on the 30- and 60-d-old seedlings were 25.7 and 18.2%, respectively, compared with the 40-d-old seedlings. Increased root neck diameter, green leaf number, shoot, and root dry matter was the case on 40-d-old seedling transplanted plants compared with other ages. However, the increase was larger in the old seedlings than in the young seedlings. On average, the shoot and root dry weights of the 30-d-old seedlings were 1.9 and 1.7% of those in the 60-d-old seedlings. However, correlation analysis revealed that the seedlings with the highest shoot and root dry matter did not necessarily obtain the highest seed yield. Factor analysis suggested that the effects of root neck diameter and green leaf number on seed yield were more pronounced than those of shoot and root dry matter. Therefore, high seed yield in canola could be defined in terms of optimum green leaf numbers and branches per plant.


Sign in / Sign up

Export Citation Format

Share Document