Vase life characteristics of selected Grevillea

1996 ◽  
Vol 36 (3) ◽  
pp. 379 ◽  
Author(s):  
DC Joyce ◽  
P Beal ◽  
AJ Shorter
Keyword(s):  
Vase Life ◽  
Cut Flower ◽  
Breeding Programs ◽  
Flower Production ◽  
Large Genus

Grevillea is a large genus containing many species, forms and hybrids bearing inflorescences with desirable cut flower characteristics. Nineteen different Grevillea spp. and forms (7), and 39 hybrids (including 11 repeat collections) were assessed for vase life. Longevity varied 3-fold, from 3 days for G. wickhamii to 9 days for a G. whiteana accession. Species with comparatively long vase lives included G. pteridifolia, G. sessilis and G. whiteana. These genotypes may be useful for cut flower production and/or in breeding programs aimed at producing new cut flower Grevillea.

scholarly journals FIELD-GROWN CUT FLOWERS: AN ECONOMICAL ANALYSIS FOR PRODUCTION IN THE OZARKS

HortScience ◽  
1992 ◽  
Vol 27 (6) ◽  
pp. 659d-659
Author(s):  
Gloria McIntosh ◽  
Gerald Klingaman
Keyword(s):  
Consumer Response ◽  
Stem Length ◽  
Vase Life ◽  
Cut Flower ◽  
Cut Flowers ◽  
Fresh Weight ◽  
Flower Production ◽  
Economical Analysis ◽  
Celosia Cristata ◽  
Number Of Stems

Several cut flower species were studied to determine their feasibility for cut flower production. Three fertilizer treatments (0.5, .1, and .15kg/m2 respectively) were used and their effect on number of stems, stem length and fresh weight were determined. Celosia cristata and Ageratum houstonianum `Blue Horizon' proved to respond best to fertilizer treatments. Celosia fertilized at a rate of .15kg/m2 will produce approximately 200 stems/m2. Ageratum will produce appoximately 400 stems/m2 when fertilized at a rate of .10kg/m2. Fertlizer rates of .10 and .15 kg/m2 for Eustoma culture yielded 86 stems/m2, which was lower than other species used in this test. Extended vase life and consumer response could possibly justify using this species in cut flower production. An economic break-even analysis will be presented to show what price will have to be received per stem to cover costs.

scholarly journals Production and Postharvest Evaluation of Selected Exotic Specialty Annual Cut Flower Species in Punjab, Pakistan

2017 ◽  
Vol 27 (6) ◽  
pp. 878-883 ◽  
Author(s):  
Iftikhar Ahmad ◽  
Muhammad B. Rafiq ◽  
John M. Dole ◽  
Bilal Abdullah ◽  
Kinza Habib
Keyword(s):  
Human Resources ◽  
Climatic Conditions ◽  
Antirrhinum Majus ◽  
Vase Life ◽  
Tagetes Erecta ◽  
Distilled Water ◽  
Cut Flower ◽  
High Quality ◽  
Business Opportunity ◽  
Flower Production

Favorable agro-climatic conditions and comparatively cheaper and readily available human resources offer a promising business opportunity to cut flower production in Pakistan. Presently, growers are limited to traditional cut flower crops such as rose (Rosa hybrids), gladiolus (Gladiolus hybrids), marigold (Tagetes erecta), and tuberose (Polianthes tuberosa) because of unavailability of improved new species and cultivars. To diversify cut flower production in Pakistan, a study was conducted to evaluate the production and postharvest performance of different cultivars of delphinium (Delphinium hybrids), snapdragon (Antirrhinum majus), and stock (Matthiola incana) in Faisalabad, Punjab, Pakistan. ‘Guardian White’ delphinium had the shortest time to harvest first marketable stems (160 days) with comparatively shorter stems (87.7 cm). Whereas ‘Aurora White’ and ‘Aurora Blue’ were high-temperature tolerant and produced attractive racemes with longer stems; 112.0 and 99.7 cm, respectively. All cultivars lasted about 7 days in distilled water (DW). ‘Cheerful White’ stock had the shortest cropping time and produced highest quality double flowers with longest stems (51.8 cm) compared with other cultivars tested. Vase solution of 4% sucrose supplemented with 100 mg·L−1 silver nitrate (AgNO3) extended the vase life of ‘Cheerful White’ stock up to 11.8 days compared with 8.2 days in DW. Pulsing with 10% sucrose supplemented with 100 mg·L−1 AgNO3 extended the longevity of ‘Lucinda Dark Rose Double’ stock (10.2 days) similar to vase solution of 4% sucrose plus 100 mg·L−1 AgNO3; however, ‘Lucinda Dark Rose Double’ stock produced shorter stems than ‘Cheerful White’. ‘Appleblossom’ snapdragon produced >10 marketable stems per plant with highest quality attractive flowers, and stout stems, which lasted 10.8 days in 4% sucrose vase solution supplemented with 100 mg·L−1 AgNO3. Among tested species/cultivars, all exotic species/cultivars produced uniform high quality stems resulting in higher productivity as compared with local cultivars and were favorably appraised by flower growers/retailers and are best suited for diversification of local cut flower industry.

scholarly journals North American Specialty Cut Flower Production and Postharvest Survey

2019 ◽  
Vol 29 (3) ◽  
pp. 338-359 ◽  
Author(s):  
Cristian E. Loyola ◽  
John M. Dole ◽  
Rebecca Dunning
Keyword(s):  
United States ◽  
The United States ◽  
Stem Length ◽  
Temperature Management ◽  
Vase Life ◽  
Cut Flower ◽  
Cut Flowers ◽  
Insect Management ◽  
Customer Complaints ◽  
Flower Production

In the United States and Canada, there has been an increase in the demand for local specialty cut flowers and a corresponding increase in production. To assess the needs of the industry, we electronically surveyed 1098 cut flower producers and handlers in the United States and Canada regarding their current cut flower production and postharvest problems, and customer issues. We received a total of 210 responses, resulting in a 19% response rate. The results showed that the main production problem was insect management; crop timing was the second most important problem and disease management was the third. Crop timing encompasses a range of related issues such as determining the correct harvest stage, harvest windows that are too short, flowering all at once, or lack of control when the crop is ready to harvest. The main postharvest problems were temperature management, hydration, and flower food management. Timing and stem length were the two most mentioned species-specific production issues, with each one listed by 10% or more of the respondents for eight of the total 31 species. Regarding on-farm postharvest handling, hydration and vase life were the two most mentioned issues; they were reported for five and three species, respectively. For postharvest during storage and transport, damage and hydration were the most common issues; these were listed for three species each. The most commonly mentioned customer complaints were vase life and shattering, which were reported for six and two species, respectively. These results will allow researchers and businesses to focus on the major cut flower production and postharvest issues and on crops that are most in need of improvement in North America.

scholarly journals Meiotic Defects and Premature Tapetal Degeneration Are Involved in the Low Fertility of Oncidesa Gower Ramsey, an Important Cut-flower Orchid

HortScience ◽  
2018 ◽  
Vol 53 (9) ◽  
pp. 1283-1287 ◽  
Author(s):  
Cheng-Jung Hu ◽  
Nean Lee ◽  
Yung-I Lee
Keyword(s):  
Pollen Germination ◽  
Diploid Species ◽  
Middle Layer ◽  
Low Fertility ◽  
Cut Flower ◽  
Tetrad Stage ◽  
Breeding Programs ◽  
Flower Production ◽  
Pollen Stage

The dancing-lady orchid, Oncidesa Gower Ramsey, is an important cultivar for cut-flower production, but it has low pollen fertility in breeding programs. In this study, we compared the pollen germination in vitro, sporad type, and pollinia development of Oncsa. Gower Ramsey and a diploid species, Oncidium sphacelatum Lindl (one of its grandparents). In Oncsa. Gower Ramsey, the pollen germination in vitro was lower as compared with those in Onc. sphacelatum. In addition, the frequency of abnormal sporads in Oncsa. Gower Ramsey was higher than those in Onc. sphacelatum. In Oncsa. Gower Ramsey, the middle layer and the tapetum were disorganized before meiosis, and subsequently they degenerated at the early tetrad stage. In contrast, the middle layer and the tapetum of Onc. sphacelatum began to degenerate at the early tetrad stage and fully disappeared at the bicellular pollen stage. These results suggested that the abnormal meiosis caused by unbalanced genomes and the premature degeneration of the middle layer and the tapetum could probably result in the abnormal pollen development and the low fertility of Oncsa. Gower Ramsey.

scholarly journals Evaluation of Hybrids and Cultivars of Single type Tuberose (Polianthes tuberosa)

2020 ◽  
Vol 15 (1) ◽  
pp. 67-71
Author(s):  
Jadhav S B ◽  
Vichare S V ◽  
Katwate S M
Keyword(s):  
Significant Variation ◽  
Spike Length ◽  
Single Type ◽  
Maximum Diameter ◽  
Vase Life ◽  
Cut Flower ◽  
Cut Flowers ◽  
Flower Production ◽  
Hybrid Genotype ◽  
Overall Performance

Hybrids and cultivars of single type tuberose was evaluated to fulfill the need to develop new hybrids as demanded by commercial growers. Evaluation of fifteen genotypes showed significant variation in growth, floral and bulb characters. Cultivar Arka Prajwal was significantly superior over all genotypes, which recorded least number of days for opening of 1st floret (78.55 days) with maximum diameter of spike (1.18 cm), length of floret (6.05 cm), weight of individual floret (3.12 g) and weight of spike (121.43 g).The hybrid genotype L1P4 (Variegated X Phule Rajani) was observed to be superior in terms of rachis length (39.78 cm), inter-nodal length (7.25 cm), length of bulb (8.09 cm), diameter of bulb (3.76 cm) and diameter of bulb-lets (1.85 cm). Among the hybrid genotypes L1P4 also recorded maximum plant height (116.39 cm), spike length (109.58 cm), weight of cut spike (105.08 g) and vase life (11.00 days). However, it was foundto be at par for number of florets per spike (57.25), length of floret (5.92 cm) and number of spikes per clump (10.14) with all other cultivars and hybrids tested. From the overall performance, it was found that the cultivar Arka Prajwal was the best. Genotype L1P4 found promising for loose as well as cut flower production because of its number of florets, inter-nodal length and spikes per clump which are important characters considering loose flower for taking maximum number of pickings. However, characters such as rachis length, spike length, vase life and weight of spike which are imperative for cut flowers are also noted superior in genotype L1P4.

Vernalization Accelerates Flowering of Lysimachia clethroides Duby

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 508b-508
Author(s):  
Pamela M. Lewis ◽  
Alan M. Armitage ◽  
Jim M. Garner
Keyword(s):  
Stem Diameter ◽  
Stem Length ◽  
Cut Flower ◽  
Bud Formation ◽  
Flower Production ◽  
Sphagnum Peat ◽  
Potting Media ◽  
Lysimachia Clethroides ◽  
Shoot Emergence

The effect of vernalization method and duration on off-season cut flower production of Lysimachia clethroides Duby was examined. Rhizomes harvested in October were cooled for 0, 4, 6, 8, 10 or 12 weeks at 4 ± 1 °C in crates with unmilled sphagnum peat or in 3.75-L pots with potting media prior to forcing in a warm greenhouse. After 6 or more weeks of cooling, shoots emerged from crate-cooled rhizomes in higher percentages than from pot-cooled rhizomes. However, only the duration of cooling, not the method, affected the rate of shoot emergence, visible bud formation and anthesis of the first bud in the raceme. As cooling increased from 0 to 12 weeks, the greenhouse days required for shoot emergence, visible bud formation and anthesis decreased linearly. The number of flowering flushes and flowering stems varied quadratically with cooling duration, and the highest yields occurred when rhizomes received between 4 and 10 weeks of cooling. As the number of successive flowering flushes increased, the stem length increased linearly while the stem diameter decreased linearly. High numbers of flowers were produced rapidly after 10 weeks of cooling.

Contract Growing for the Export-oriented Cut Flowers Industry in Turkey

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 531a-531 ◽  
Author(s):  
Robin G. Brumfield ◽  
Burhan Ozkan ◽  
Osman Karagüzel
Keyword(s):  
Performance Indicators ◽  
Price Setting ◽  
Production Structure ◽  
Cut Flower ◽  
Cut Flowers ◽  
Product Price ◽  
Plant Materials ◽  
Flower Production ◽  
Specific Performance ◽  
Insight Into

Thirty cut flower businesses were surveyed in 1997 to examine the production structure and main problems of export-oriented contract growing in Turkey. The survey was conducted in Antalya province, which is the center of export-oriented cut flower production in Turkey. The results of the research provided insight into how Turkish cut flower-contracted growers were managing some of the key areas of their operations. The study also provided the opportunity for growers to highlight their concerns about contract growing for export-oriented cut flower production. The survey showed that contract growers do not use specific performance indicators relevant to cut flower production. The product price received by the contract growers was determined by the export companies. These export companies receive flowers from growers mainly on consignment. After exporting the products, exporters periodically pay the grower, subtracting a commission for their services and other marketing expenses. Contract growers are essentially price takers in the transactions. The business procedure from production to price setting and marketing was not in the hands of the contract growers. Therefore, the trading risks are essentially borne by the contract growers. The main concerns raised by contract growers were the current consignment system, cost of the plant materials, and the late payment for the sold products.

Effect of Plant Growth Regulators on Growth and Quality Flower Production of Chrysanthemum (Chrysanthemum Indicum L.)

2022 ◽  
Vol 2 (1) ◽  
pp. 10-18
Author(s):  
Md Ehsanullah ◽  
Ahasan Ullah Khan ◽  
Md Kamruzzam ◽  
Sarah Tasnim
Keyword(s):  
Plant Growth ◽  
Plant Growth Regulators ◽  
Growth Regulators ◽  
Block Design ◽  
Research Centre ◽  
Vase Life ◽  
Flower Initiation ◽  
Growth Promoter ◽  
Flower Production ◽  
Minimum Number

A field study was conceded to assess the effect of plant growth regulators on growth and quality flower production of chrysanthemum at Horticulture Research Centre (HRC), Gazipur, Bangladesh. The experiment was laid out in Randomized Complete Block Design (RCBD) with ten (10) treatments and three replications. The treatments of plant growth regulators concentration were T1-50 ppm GA3, T2-100 ppm GA3, T3-150 ppm GA3, T4-400 ppm CCC, T5-600 ppm CCC, T6-800 ppm CCC, T7-250 ppm MH, T8-500 ppm MH, T9-750 ppm MH and, T10-Control. The maximum spreading of plant (27.0 cm) was observed when plants were treated with GA3 @ 150 ppm where the minimum plant spread (16.8 cm) was recorded in plants treated with CCC @ 800 ppm. The higher number of suckers (33) per pot was produced when pots were treated with GA3 @ 150 ppm whereas, application of CCC at three different concentrations produced lower number of suckers.  The highest number of flower (40) was recorded with 150 ppm GA3, where minimum number of flowers (25) per pot in 800 ppm CCC. The plants sprayed with 50 ppm GA3 took 48 days to flower initiation, whereas, it took 70 days with 750 ppm MH. the highest plants recorded (7.40 cm) with 800 ppm CCC, whereas, lowest size (6.50 cm) was obtained with the application of 500 ppm MH. The maximum vase life of flowers was recorded for the treatment 800 ppm CCC (15 days), which was at par with 13 days vase life obtained by spraying 600 ppm CCC. Therefore, it is concluded that the GA3 acted as growth promoter and the CCC acted as growth retardants on yield and quality of chrysanthemum.

scholarly journals Identification of Xylem Occlusions Occurring in CutClematis(ClematisL., fam.RanunculaceaeJuss.) Stems during Their Vase Life

2012 ◽  
Vol 2012 ◽  
pp. 1-12 ◽  
Author(s):  
Agata Jedrzejuk ◽  
Julia Rochala ◽  
Jacek Zakrzewski ◽  
Julita Rabiza-Świder
Keyword(s):  
Water Uptake ◽  
Plant Material ◽  
Microbial Growth ◽  
Vascular System ◽  
Vase Life ◽  
Cut Flower ◽  
Cut Flowers ◽  
Bacterial Development ◽  
Growth Formation ◽  
New Treatments

During the vase life of cut stems obstruction of xylem vessels occurs due to microbial growth, formation of tyloses, deposition of materials in the lumen of xylem vessels and the presence of air emboli in the vascular system. Such obstructions may restrict water uptake and its transport towards upwards thus lowering their ornamental value and longevity of cut flowers.Clematisis a very attractive plant material which may be used as cut flower in floral compositions. Nothing is known about the histochemical or cytological nature of xylem blockages occurring in cut stems of this plant. This study shows that inclematis, tyloses are the main source of occlusions, although bacteria and some amorphic substances may also appear inside the vessels. A preservative composed of 200 mg dm−38-HQC (8-hydroxyquinolin citrate) and 2% sucrose arrested bacterial development and the growth of tyloses. This information can be helpful in the development of new treatments to improve keeping qualities of cutclematisstems.

Sign in / Sign up

Export Citation Format

Share Document