Changes in chemical properties of 48 intensively grazed, rain-fed dairy paddocks on sandy soils over 11 years of liming in south-western Australia

Soil Research ◽  
2010 ◽  
Vol 48 (8) ◽  
pp. 682 ◽  
Author(s):  
M. D. A. Bolland ◽  
W. K. Russell
Keyword(s):  
Western Australia ◽  
Root Zone ◽  
Sandy Loam ◽  
Chemical Properties ◽  
Soil Testing ◽  
Soil Test ◽  
Organic Carbon Content ◽  
Pasture Production ◽  
Soil P ◽  
Soil Test P

Soil testing was conducted during 1999–2009 to determine lime and fertiliser phosphorus (P), potassium (K), and sulfur (S) requirements of intensively grazed, rain-fed, ryegrass dairy pastures in 48 paddocks on sand to sandy loam soils in the Mediterranean-type climate of south-western Australia. The study demonstrated that tissue testing was required in conjunction with soil testing to confirm decisions based on soil testing, and to assess management decisions for elements not covered by soil testing. Soil testing for pH was reliable for indicating paddocks requiring lime to ameliorate soil acidity, and to monitor progress of liming. Soil P testing proved reliable for indicating when P fertiliser applications were required, with no P being required when soil-test P was above the critical value for that soil, and when no P was applied, tissue testing indicated that P remained adequate for ryegrass production. Soil testing could not be used to determine paddocks requiring fertiliser K and S, because both elements can leach below the root-zone, with rainfall determining the extent of leaching and magnitude of the decrease in pasture production resulting from deficiency, which cannot be predicted. The solution is to apply fertiliser K and S each year, and use tissue testing to improve fertiliser K and S management. Research has shown that, for dairy and other grazing industries in the region, laboratories need measure and report every year soil pH and soil-test P only, together with measuring every 3–5 years the P-buffering index (estimating P sorption of soil), organic carbon content, and electrical conductivity.

Soil testing for phosphorus: comparing the Mehlich 3 and Colwell procedures for soils of south-western Australia

Soil Research ◽  
2003 ◽  
Vol 41 (6) ◽  
pp. 1185 ◽  
Author(s):  
M. D. A. Bolland ◽  
D. G. Allen ◽  
K. S. Walton
Keyword(s):  
Western Australia ◽  
Phosphate Rock ◽  
Field Experiments ◽  
Soil Samples ◽  
Soil Test ◽  
P Values ◽  
Plant Yield ◽  
Soil P ◽  
Soil Test P

Soil samples were collected from 14 long-term field experiments in south-western Australia to which several amounts of superphosphate or phosphate rock had been applied in a previous year. The samples were analysed for phosphorus (P) by the Colwell sodium bicarbonate procedure, presently used in Western Australia, and the Mehlich 3 procedure, being assessed as a new multi-element test for the region. For the Mehlich procedure, the concentration of total and inorganic P in the extract solution was measured. The soil test values were related to yields of crops and pasture measured later on in the year in which the soil samples were collected.The Mehlich 3 procedures (Mehlich 3 total and Mehlich 3 inorganic soil test P values) were similar, with the total values mostly being slightly larger. For soil treated with superphosphate, for each year of each experiment: (i) Mehlich 3 values were closely correlated with Colwell values; and (ii) the relationship between plant yield and soil test P (the soil P test calibration) was similar for the Colwell and Mehlich 3 procedures. However, for soil treated with phosphate rock, the Colwell procedure consistently produced lower soil test P values than the Mehlich 3 procedure, and the calibration relating plant yield to soil test P was different for the Colwell and Mehlich 3 procedures, indicating, for soils treated with phosphate rock, separate calibrations are required for the 2 procedures. We conclude that for soils of south-western Australia treated with superphosphate (most of the soils), the Mehlich 3 procedure can be used instead of the Colwell procedure to measure soil test P, providing support for the Mehlich 3 procedure to be developed as the multi-element soil test for the region.

Soil and tissue tests to predict pasture yield responses to applications of potassium fertiliser in high-rainfall areas of south-western Australia

2002 ◽  
Vol 42 (2) ◽  
pp. 149 ◽  
Author(s):  
M. D. A. Bolland ◽  
W. J. Cox ◽  
B. J. Codling
Keyword(s):  
Western Australia ◽  
Field Experiments ◽  
Relative Yield ◽  
Subterranean Clover ◽  
Test Method ◽  
Yield Response ◽  
Soil Test ◽  
Test Procedures ◽  
Pasture Production ◽  
Yield Responses

Dairy and beef pastures in the high (>800 mm annual average) rainfall areas of south-western Australia, based on subterranean clover (Trifolium subterraneum) and annual ryegrass (Lolium rigidum), grow on acidic to neutral deep (>40 cm) sands, up to 40 cm sand over loam or clay, or where loam or clay occur at the surface. Potassium deficiency is common, particularly for the sandy soils, requiring regular applications of fertiliser potassium for profitable pasture production. A large study was undertaken to assess 6 soil-test procedures, and tissue testing of dried herbage, as predictors of when fertiliser potassium was required for these pastures. The 100 field experiments, each conducted for 1 year, measured dried-herbage production separately for clover and ryegrass in response to applied fertiliser potassium (potassium chloride). Significant (P<0.05) increases in yield to applied potassium (yield response) were obtained in 42 experiments for clover and 6 experiments for ryegrass, indicating that grass roots were more able to access potassium from the soil than clover roots. When percentage of the maximum (relative) yield was related to soil-test potassium values for the top 10 cm of soil, the best relationships were obtained for the exchangeable (1 mol/L NH4Cl) and Colwell (0.5 mol/L NaHCO3-extracted) soil-test procedures for potassium. Both procedures accounted for about 42% of the variation for clover, 15% for ryegrass, and 32% for clover + grass. The Colwell procedure for the top 10 cm of soil is now the standard soil-test method for potassium used in Western Australia. No increases in clover yields to applied potassium were obtained for Colwell potassium at >100 mg/kg soil. There was always a clover-yield increase to applied potassium for Colwell potassium at <30 mg/kg soil. Corresponding potassium concentrations for ryegrass were >50 and <30 mg/kg soil. At potassium concentrations 30–100 mg/kg soil for clover and 30–50 mg/kg soil for ryegrass, the Colwell procedure did not reliably predict yield response, because from nil to large yield responses to applied potassium occurred. The Colwell procedure appears to extract the most labile potassium in the soil, including soluble potassium in soil solution and potassium balancing negative charge sites on soil constituents. In some soils, Colwell potassium was low indicating deficiency, yet plant roots may have accessed potassum deeper in the soil profile. Where the Colwell procedure does not reliably predict soil potassium status, tissue testing may help. The relationship between relative yield and tissue-test potassium varied markedly for different harvests in each year of the experiments, and for different experiments. For clover, the concentration of potassium in dried herbage that was related to 90% of the maximum, potassium non-limiting yield (critical potassium) was at the concentration of about 15 g/kg dried herbage for plants up to 8 weeks old, and at <10 g/kg dried herbage for plants older than 10–12 weeks. For ryegrass, there were insufficient data to provide reliable estimates of critical potassium.

Relationship of soil phosphorus fractions to phosphorus soil tests and fertilizer response

2003 ◽  
Vol 83 (4) ◽  
pp. 443-449 ◽  
Author(s):  
R. H. McKenzie ◽  
E. Bremer
Keyword(s):  
Available P ◽  
Soil Test ◽  
Strongly Correlated ◽  
P Fractions ◽  
Soil Tests ◽  
Fertilizer Response ◽  
Inorganic P ◽  
Soil P ◽  
P Fertilizer ◽  
Soil Test P

Soil tests for available P may not be accurate because they do not measure the appropriate P fraction in soil. A sequential extraction technique (modified Hedley method) was used to determine if soil test P methods were accurately assessing available pools and if predictions of fertilizer response could be improved by the inclusion of other soil P fractions. A total of 145 soils were analyzed from field P fertilizer experiments conducted across Alberta from 1991 to 1993. Inorganic P (Pi) removed by extraction with an anion-exchange resin (resin P) was highly correlated with the Olsen and Kelowna-type soil test P methods and had a similar relationship with P fertilizer response. No appreciable improvement in the fit of available P with P fertilizer response was achieved by including any of the less available P fractions in the regression of P fertilizer response with available P. Little Pi was extractable in alkaline solutions (bicarbonate and NaOH), particularly in soils from the Brown and Dark Brown soil zones. Alkaline fractions were the most closely related to resin P, but the relationship depended on soil zone. Inorganic P extractable in dilute HCl was most strongly correlated with soil pH, reflecting accumulation in calcareous soils, while Pi extractable in concentrated acids (HCl and H2SO4) was most strongly correlated with clay concentration. A positive but weak relationship as observed between these fractions and resin P. Complete fractionation of soil P confirmed that soil test P methods were assessing exchangeable, plant-available P. Key words: Hedley phosphorus fractionation, resin, Olsen, Kelowna

Effect of P-buffer capacity and P-retention index of soils on soil test-P, soil test P-calibrations and yield response curvature

Soil Research ◽  
1994 ◽  
Vol 32 (3) ◽  
pp. 503 ◽  
Author(s):  
MDA Bolland ◽  
IR Wilson ◽  
DG Allen
Keyword(s):  
Retention Index ◽  
Buffer Capacity ◽  
Linear Equations ◽  
Yield Response ◽  
Soil Test ◽  
Soil P ◽  
Sorption Method ◽  
Mitscherlich Equation ◽  
Soil Test P ◽  
P Retention

Twenty-three virgin Western Australian soils of different buffer capacities (BC) for phosphorus (P) were collected. The effects of BC on the relationships between Colwell soil test P and the level of P applied, yield and soil test P, and yield and the level of P applied were studied. Wheat (Triticum aestivum cv. Reeves), grown for 27 days in a glasshouse, was used. Two methods of measuring P sorption of soils, P buffer capacity (PBC) and P retention index (PRI), were used. The PBC is determined from a multi-point sorption curve. The PRI is a new, diagnostic, one-point, sorption method now widely used for commercial soil P testing in Western Australia. Both PBC and PRI produced similar results. The relationship between soil test P and the level of P applied was adequately described by a linear equation. When the slope coefficient of the linear equations was related to PBC or PRI, there was no relationship. The other two relationships were adequately described by a Mitscherlich equation. When the curvature coefficient of the Mitscherlich equation was related to PBC or PRI, the trend was for the value of the coefficient to decrease with increasing PBC or PRI. Consequently, as the capacity of the soil to sorb P increased the trend was for larger soil test P or higher levels of P application to produce the same yield.

Indicator of risk of water contamination by phosphorus from Canadian agricultural land

2006 ◽  
Vol 53 (2) ◽  
pp. 303-310 ◽  
Author(s):  
E. van Bochove ◽  
G. Thériault ◽  
F. Dechmi ◽  
A.N. Rousseau ◽  
R. Quilbé ◽  
...  
Keyword(s):  
Water Contamination ◽  
Crop Residue ◽  
Management Practices ◽  
Agricultural Land ◽  
Soil Phosphorus ◽  
Soil Test ◽  
Soil P ◽  
Soil Test P ◽  
P Balance ◽  
Balance Factor

The indicator of risk of water contamination by phosphorus (IROWC_P) is designed to estimate where the risk of water P contamination by agriculture is high, and how this risk is changing over time based on the five-year period of data Census frequency. Firstly developed for the province of Quebec (2000), this paper presents an improved version of IROWC_P (intended to be released in 2008), which will be extended to all watersheds and Soil Landscape of Canada (SLC) polygons (scale 1:1, 000, 000) with more than 5% of agriculture. There are three objectives: (i) create a soil phosphorus saturation database for dominant and subdominant soil series of SLC polygons – the soil P saturation values are estimated by the ratio of soil test P to soil P sorption capacity; (ii) calculate an annual P balance considering crop residue P, manure P, and inorganic fertilizer P – agricultural and manure management practices will also be considered; and (iii) develop a transport-hydrology component including P transport estimation by runoff mechanisms (water balance factor, topographic index) and soil erosion, and the area connectivity to water (artificial drainage, soil macropores, and surface water bodies).

scholarly journals Predicting Need for Phosphorus Fertilizer by Soil Testing During Seeding of Cool Season Grasses

HortScience ◽  
2006 ◽  
Vol 41 (7) ◽  
pp. 1690-1697 ◽  
Author(s):  
Stephanie C. Hamel ◽  
Joseph R. Heckman
Keyword(s):  
Perennial Ryegrass ◽  
Tall Fescue ◽  
Kentucky Bluegrass ◽  
Soil Testing ◽  
Soil Test ◽  
P Fertilization ◽  
Extractable P ◽  
Soil Test P ◽  
Grass Establishment ◽  
Bray 1

Recent changes in soil testing methodology, the important role of P fertilization in early establishment and soil coverage, and new restrictions on P applications to turf suggest a need for soil test calibration research on Kentucky bluegrass (Poa pratensis L.), tall fescue (Festuca arundinacea Schreb), and perennial ryegrass (Lolium perenne L.). Greenhouse and field studies were conducted for 42 days to examine the relationship between soil test P levels and P needs for rapid grass establishment using 23 NJ soils with a Mehlich-3 extractable P ranging from 6 to 1238 mg·kg–1. Soil tests (Mehlich-1, Mehlich-3, and Bray-1) for extractable P were performed by inductively coupled plasma–atomic emission spectroscopy (ICP). Mehlich-3 extractable P and Al were measured to evaluate the ratio of P to Al as a predictor of need for P fertilizer. Kentucky bluegrass establishment was more sensitive to low soil P availability than tall fescue or perennial ryegrass. Soil test extractants Mehlich-1, Bray-1, or Mehlich-3 were each effective predictors of need for P fertilization. The ratio of P to Al (Mehlich-3 P/Al %) was a better predictor of tall fescue and perennial ryegrass establishment response to P fertilization than soil test P alone. The Mehlich-1, Bray-1, and Mehlich-3 soil test P critical levels for clipping yield response were in the range of 170 to 280 mg·kg–1, depending on the soil test extractant, for tall fescue and perennial ryegrass. The Mehlich-3 P/Al (%) critical level was 42% for tall fescue and 33% for perennial ryegrass. Soil test critical levels, based on estimates from clipping yield data, could not be determined for Kentucky bluegrass using the soils in this study. Soil testing for P has the potential to aid in protection of water quality by helping to identify sites where P fertilization can accelerate grass establishment and thereby prevent soil erosion, and by identifying sites that do not need P fertilization, thereby preventing further P enrichment of soil and runoff. Because different grass species have varying critical P levels for establishment, both soil test P and the species should be incorporated into the decision-making process regarding P fertilization.

How Can Soil P Balance Influence Soil Test P? A case study from the Argentinian Pampas

2018 ◽  
Vol 102 (4) ◽  
pp. 11-13
Author(s):  
Florencia Sucunza ◽  
Flavio Gutiérrez Boem ◽  
Fernando García ◽  
Miguel Boxler ◽  
Gerardo Rubio
Keyword(s):  
Soil Test ◽  
Soil P ◽  
Soil Test P ◽  
P Balance ◽  
Study Sites ◽  
Single Response ◽  
The Impact ◽  
P Fertilizers

Data from long-term crop rotation study sites were combined to evaluate the effect of long-term application (and omission) of P fertilizers. The impact of maintaining either a negative or positive P balances on soil test P at five distinct sites was described by single response functions despite a range of differences in soil properties.

Performance of Cowpea [Vigna Unguiculata (L.) Walp] Under Organic Production System in Southern Dry Zone of Karnataka

2019 ◽  
Author(s):  
S B Yogananda ◽  
P Thimmegowda ◽  
G K Shruthi
Keyword(s):  
Grain Yield ◽  
Production System ◽  
Agricultural Research ◽  
Sandy Loam ◽  
Chemical Properties ◽  
Organic Production ◽  
Soil Chemical Properties ◽  
Cost Ratio ◽  
Research Station ◽  
Organic Carbon Content

A field experiment was carried out during kharif 2013, 2014, 2015 and 2016 at Zonal Agricultural Research Station, V. C. Farm, Mandya to study the performance of cowpea under organic production system in red sandy loam soil. The results revealed that application of 100% N equivalent compost + recommended FYM (10 t/ha) + beejamrutha (seed treatment) + jeevamrutha (500 liter/ha) recorded significantly higher grain yield during all the years of experimentation (2056, 1987, 2108 and 2365 kg/ha, respectively) and also in their pooled data (grain yield 2129 kg/ha). This increased yield was attributed to more availability of nitrogen (289.5 kg/ha), phosphorus (40.5 kg/ha) and potassium (182.3 kg/ha) in the soil compared to other treatments. The benefit: cost ratio was higher with application of 100% N equivalent compost + jeevamrutha + beejamrutha (2.81). Soil chemical properties, viz. soil pH, organic carbon content and electric conductivity, were not influenced significantly by application of organic manures. However, there was an improvement in the soil chemical properties (289.5, 40.5 and 182.3 N, P2O5 and K2O kg/ha, respectively) compared to initial soil data (229, 19.2 and 135 NPK kg/ha).

Effect of soil temperature and moisture on soil test P with different extractants

2012 ◽  
Vol 92 (3) ◽  
pp. 537-542 ◽  
Author(s):  
Chunyu Song ◽  
Xingyi Zhang ◽  
Xiaobing Liu ◽  
Yuan Chen
Keyword(s):  
Soil Moisture ◽  
Soil Temperature ◽  
Test Methods ◽  
Soil Test ◽  
Soil P ◽  
Soil P Test ◽  
Soil Test P ◽  
Fertilization Level ◽  
Bray 1 ◽  
Soil Temperature And Moisture

Song, C., Zhang, X., Liu, X. and Chen, Y. 2012. Effect of soil temperature and moisture on soil test P with different extractants. Can. J. Soil Sci. 92: 537–542. Temperature and moisture are important factors affecting adsorption, transformation and the availability of soil phosphorus (P) to plants. The different temperatures and moisture contents at which soil is sampled might affect the results of soil test P (STP). In order to evaluate the effect of the temperature and moisture, as well as the fertilization level, on the results of soil test P, an incubation study involving three soil temperatures (5, 10, and 20°C), and three soil moisture contents (50, 70, 90% of field water-holding capacity) was conducted with Chinese Mollisols collected from four fertilization treatments in a long-term experiment in northeast China. Four soil P test methods, Mehlich 3, Morgan, Olsen and Bray 1 were used to determine STP after a 42-d incubation. The effect of temperature and moisture on STP varied among soil P tests. Averaged across the four fertilization treatments, the temperature had significant impact on STP, while the responses varied among soil P test methods. Mehlich 3, Morgan and Bray 1 STP decreased and Olsen STP increased with increase in temperature. Effect of soil moisture was only significant for Mehlich 3 P and Olsen P. Soil temperature had greater impact on STP than soil moisture content. The responses of the Olsen method to temperature differed from the other three methods tested. The interaction between soil temperature and soil moisture on soil test P was only significant for Mehlich 3 P. Fertilization level does not affect the STP in as a clear pattern as the temperature and moisture varied for all four methods. Consistent soil sampling conditions, especially the soil temperature, appear to be the first step to achieve a reliable STP for any soil P test.

Soil modification by termites in the central wheat-belt of Western-Australia

Soil Research ◽  
1995 ◽  
Vol 33 (1) ◽  
pp. 179 ◽  
Author(s):  
LAL Debruyn ◽  
AJ Conacher
Keyword(s):  
Western Australia ◽  
Sandy Loam ◽  
Chemical Properties ◽  
Food Sources ◽  
Termite Mounds ◽  
Plant Soil ◽  
Semi Arid Region ◽  
Open Woodland ◽  
Considerable Period ◽  
Modified Soil

In a semi-arid region of Western Australia, in kwongan and open woodland, we examined the texture and selected chemical properties of two soil types, firstly in the mounds of two mound-building termite species (Drepanotermes tamminensis and Amitermes obeuntis) and secondly in the foraging galleries of D. tamminensis and A. neogermanus. The soil properties of the termite-modified soil were compared with soil unaffected by termite activity. It was found that both mounds and foraging galleries had significantly higher clay contents, increased organic carbon, and lower pH than the surface soil. The mean standing mass of D. tamminensis mounds was 5 Mg ha-1) on yellow sand (under kwongan vegetation) and 7 Mg ha-1) on grey sandy loam (under open woodland). However, this modified soil is predicted to be inaccessible for plant growth for a considerable period of time, since termite mound longevity could be as much as 70 years. In contrast, termite-modified soil from foraging galleries and chambers in the soil or soil sheetings covering food sources would be more readily accessible to the plant-soil ecosystem than modified soil materials in termite mounds.

Sign in / Sign up

Export Citation Format

Share Document