X-Ray kinetic study of glassy crystal formation in adamantane derivatives: TTT curves and crystal size effect

1989 ◽  
Vol 14 (1-4) ◽  
pp. 85-96 ◽  
Author(s):  
M. El Adib ◽  
M. Descamps ◽  
N. B. Chanh
Keyword(s):  
Size Effect ◽  
Kinetic Study ◽  
Crystal Size ◽  
Adamantane Derivatives ◽  
Crystal Formation ◽  
X Ray

Techniques for cryoultramicrotomy of propane jet frozen biological samples

1986 ◽  
Vol 44 ◽  
pp. 260-261
Author(s):  
B. Craig ◽  
L. Hawkey ◽  
A. LeFurgey
Keyword(s):  
Freeze Fracture ◽  
Freeze Substitution ◽  
Heart Cells ◽  
Crystal Formation ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Chick Heart ◽  
Embryonic Chick Heart ◽  
A New Technique

Ultra-rapid freezing followed by cryoultramicrotomy is essential for the preservation of diffusible elements in situ within cells prior to scanning transmission electron microscopy and quantitative energy dispersive x-ray microanalysis. For cells or tissue fragments in suspension and for monolayer cell cultures, propane jet freezing provides cooling rates greater than 30,000°C/sec with regions up to 40μm in thickness free of significant ice crystal formation. While this method of freezing has frequently been applied prior to freeze fracture or freeze substitution, it has not been widely utilized prior to cryoultramicrotomy and subsequent x-ray microanalytical studies. This report describes methods devised in our laboratory for cryosectioning of propane jet frozen kidney proximal tubule suspensions and cultured embryonic chick heart cells, in particular a new technique for mounting frozen suspension specimens for sectioning. The techniques utilize the same specimen supports and sample holders as those used for freeze fracture and freeze substitution and should be generally applicable to any cell suspension or culture preparation.

scholarly journals Study on the Electrical, Structural, Chemical and Optical Properties of PVD Ta(N) Films Deposited with Different N2 Flow Rates

Coatings ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 937
Author(s):  
Yingying Hu ◽  
Md Rasadujjaman ◽  
Yanrong Wang ◽  
Jing Zhang ◽  
Jiang Yan ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Optical Properties ◽  
Photoelectron Spectroscopy ◽  
Crystal Size ◽  
Silicon Substrates ◽  
X Ray Diffraction ◽  
Dc Magnetron Sputtering ◽  
Flow Rates ◽  
X Ray ◽  
N2 Flow Rate

By reactive DC magnetron sputtering from a pure Ta target onto silicon substrates, Ta(N) films were prepared with different N2 flow rates of 0, 12, 17, 25, 38, and 58 sccm. The effects of N2 flow rate on the electrical properties, crystal structure, elemental composition, and optical properties of Ta(N) were studied. These properties were characterized by the four-probe method, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and spectroscopic ellipsometry (SE). Results show that the deposition rate decreases with an increase of N2 flows. Furthermore, as resistivity increases, the crystal size decreases, the crystal structure transitions from β-Ta to TaN(111), and finally becomes the N-rich phase Ta3N5(130, 040). Studying the optical properties, it is found that there are differences in the refractive index (n) and extinction coefficient (k) of Ta(N) with different thicknesses and different N2 flow rates, depending on the crystal size and crystal phase structure.

Structural changes in titanium dioxide nanocrystals during plastic deformation

2005 ◽  
Vol 38 (5) ◽  
pp. 749-756 ◽  
Author(s):  
Ulrich Gesenhues
Keyword(s):  
Structural Changes ◽  
Crystal Size ◽  
Lower Layer ◽  
High Energy ◽  
Primary Crystal ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Hall Method ◽  
Means Of Transmission

The polygonization of 200 nm rutile crystals during dry ball-milling at 10gwas monitored in detail by means of transmission electron microscopy (TEM) and X-ray diffraction (XRD). The TEM results showed how to modify the Williamson–Hall method for a successful evaluation of crystal size and microstrain from XRD profiles. Macrostrain development was determined from the minute shift of the most intense reflection. In addition, changes in pycnometrical density were monitored. Accordingly, the primary crystal is disintegrated during milling into a mosaic of 12–35 nm pieces where the grain boundaries induce up to 1.2% microstrain in a lower layer of 6 nm thickness. Macrostrain in the interior of the crystals rises to 0.03%. The pycnometrical density, reflecting the packing density of atoms in the grain boundary, decreases steadily by 1.1%. The results bear relevance to our understanding of plastic flow and the mechanism of phase transitions of metal oxides during high-energy milling.

scholarly journals Highly Efficient Adsorption of Aqueous Pb(II) with Mesoporous Metal-Organic Framework-5: An Equilibrium and Kinetic Study

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
José María Rivera ◽  
Susana Rincón ◽  
Cherif Ben Youssef ◽  
Alejandro Zepeda
Keyword(s):  
Kinetic Study ◽  
Photoelectron Spectroscopy ◽  
Metal Organic Framework ◽  
Isotherm Models ◽  
Ionic Exchange ◽  
Order Kinetic ◽  
X Ray ◽  
Metal Organic ◽  
Mesoporous Metal ◽  
Organic Framework

Mesoporous metal-organic framework-5 (MOF-5), with the composition Zn4O(BDC)3, showed a high capacity for the adsorptive removal of Pb(II) from 100% aqueous media. After the adsorption process, changes in both morphology and composition were detected using a scanning electron microscope (SEM) equipped with an energy dispersive X-ray (EDX) system, Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) analysis. The experimental evidence showed that Zn(II) liberation from MOF-5 structure was provoked by the water effect demonstrating that Pb(II) removal is not due to ionic exchange with Zn. A kinetic study showed that Pb(II) removal was carried out in 30 min with a behavior of pseudo-second-order kinetic model. The experimental data on Pb(II) adsorption were adequately fit by both the Langmuir and BET isotherm models with maximum adsorption capacities of 658.5 and 412.7 mg/g, respectively, at pH 5 and 45°C. The results of this work demonstrate that the use of MOF-5 has great potential for applications in environmental protection, especially regarding the removal of the lead present in industrial wastewaters and tap waters.

scholarly journals Perbaikan Kelarutan Albendazol Melalui Pembentukan Kristal Multikomponen dengan Asam Malat

2020 ◽  
Vol 6 (1) ◽  
pp. 114-123
Author(s):  
Fikri Alatas ◽  
Fahmi Abdul Azizsidiq ◽  
Titta Hartyana Sutarna ◽  
Hestyari Ratih ◽  
Sundani Nurono Soewandhi
Keyword(s):  
Phase Solubility ◽  
Crystal Formation ◽  
Solubility Curve ◽  
X Ray Diffraction ◽  
Ethanol Mixture ◽  
X Ray ◽  
Grinding Method ◽  
Diffraction Patterns ◽  
Phase Solubility Curve

An effort to improve the solubility of albendazole (ABZ), an anthelmintic drug has been successfully carried out through the formation of multicomponent crystal with dl-malic acid (MAL). Construction of phase solubility curve of ABZ in MAL solution and crystal morphological observations after recrystallization in the acetone-ethanol (9:1) mixture were performed for initial prediction of multicomponent crystal formation. ABZ-MAL multicomponent crystal was prepared by wet grinding or also known as solvent-drop grinding (SDG) with acetone-ethanol (9:1) mixture as a solvent followed by characterization of the multicomponent crystal formation by powder X-ray diffraction and Fourier transform infrared (FTIR) methods. The solubility of ABZ-MAL multicomponent crystal was tested in water at ambient temperature and in pH 1.2, 4.5 and 6.8 of buffered solutions at 37°C. The phase solubility curve of the ABZ in the MAL solution showed type Bs. The ABZ-MAL mixture has a different crystalline morphology than pure ABZ and MAL after recrystallization in the acetone-ethanol mixture (9:1). The powder X-ray diffraction pattern and the FTIR spectrum of ABZ-MAL from SDG different from intact ABZ and MAL powder X-ray diffraction patterns and these results can indicate the ABZ-MAL multicomponent crystal formation. The ABZ-MAL multicomponent crystal has better solubility than pure ABZ in all media used. These results can be concluded that ABZ-MAL multicomponent crystal can be prepared by solvent-drop grinding method with acetone-ethanol (9:1) mixture as a solvent and can increase the solubility of albendazole.

scholarly journals Structural and thermoelectric properties of the Pr2Zr2O7 compound

2019 ◽  
pp. 4-9
Author(s):  
Adolfo Quiroz-Rodríguez ◽  
Cesia Guarneros-Aguilar ◽  
Ricardo Agustin-Serrano
Keyword(s):  
Electron Microscopy ◽  
Thermal Conductivity ◽  
Thermoelectric Properties ◽  
Crystal Size ◽  
Ambient Pressure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Increasing Temperature ◽  
Thermal Stability Of ◽  
Scanning Electron

In this research, it is presented a detailed study of the structural and thermoelectric properties of the pyrochlore zirconium Pr2Zr2O7 compound prepared by solid-state reaction (SSR) in air at ambient pressure. The synthesized sample was characterized using powder X-ray diffraction. The thermal stability of the thermoelectric compound (TE) Pr2Zr2O7 was tested by thermogravimetric analysis (TGA) and differential thermal analysis (DTA). Scanning electron microscopy shows that the crystal size varies between 0.69 and 2.81μm. Electrical conductivity (\sigma) of the sample calcined at 1400 °C presented values increase irregularly with the increasing temperature from 0.001 to 0.018 S cm-1 as expected in a semiconductor material. The thermal conductivity is lower than 0.44 - 775 W m-1 K-1 which is quite anomalous in comparison with the thermal conductivity of other oxides.

scholarly journals To scavenge or not to scavenge, that is STILL the question

2012 ◽  
Vol 20 (1) ◽  
pp. 23-36 ◽  
Author(s):  
Elizabeth G. Allan ◽  
Melissa C. Kander ◽  
Ian Carmichael ◽  
Elspeth F. Garman
Keyword(s):  
Crystal Size ◽  
Chemical Species ◽  
Absorbed Dose ◽  
Dose Dependence ◽  
Radiation Chemistry ◽  
X Ray ◽  
On Line ◽  
Crystallization Conditions ◽  
Effects Of Radiation ◽  
Dose Tolerance

An extensive radiation chemistry literature would suggest that the addition of certain radical scavengers might mitigate the effects of radiation damage during protein crystallography diffraction data collection. However, attempts to demonstrate and quantify such an amelioration and its dose dependence have not yielded consistent results, either at room temperature (RT) or 100 K. Here the information thus far available is summarized and reasons for this lack of quantitative success are identified. Firstly, several different metrics have been used to monitor and quantify the rate of damage, and, as shown here, these can give results which are in conflict regarding scavenger efficacy. In addition, significant variation in results from data collected from crystals treated in nominally the same way has been observed. Secondly, typical crystallization conditions contain substantial concentrations of chemical species which already interact strongly with some of the X-ray-induced radicals that the added scavengers are intended to intercept. These interactions are probed here by the complementary technique of on-line microspectrophotometry carried out on solutions and crystals held both at 100 K and RT, the latter enabled by the use of a beamline-mounted humidifying device. With the help of computational chemistry, attempts are made to assign some of the characteristic spectral features observed experimentally. A further source of uncertainty undoubtedly lies in the challenge of reliably measuring the parameters necessary for the accurate calculation of the absorbed dose (e.g.crystal size and shape, beam profile) and its distribution within the volume of the crystal (an issue addressed in detail in another article in this issue). While microspectrophotometry reveals that the production of various species can be quenched by the addition of scavengers, it is less clear that this observation can be translated into a significant gain in crystal dose tolerance for macromolecular crystallographers.

Sign in / Sign up

Export Citation Format

Share Document