scholarly journals MISP is a novel Plk1 substrate required for proper spindle orientation and mitotic progression

2013 ◽  
Vol 200 (6) ◽  
pp. 773-787 ◽  
Author(s):  
Mei Zhu ◽  
Florian Settele ◽  
Sachin Kotak ◽  
Luis Sanchez-Pulido ◽  
Lena Ehret ◽  
...  
Keyword(s):  
Mitotic Spindle ◽  
Cell Cortex ◽  
Mitotic Progression ◽  
Uncharacterized Protein ◽  
Spindle Positioning ◽  
Pulling Forces ◽  
A Subunit ◽  
Division Axis ◽  
Dynactin Complex ◽  
Cortical Distribution

Precise positioning of the mitotic spindle determines the correct cell division axis and is crucial for organism development. Spindle positioning is mediated through a cortical machinery by capturing astral microtubules, thereby generating pushing/pulling forces at the cell cortex. However, the molecular link between these two structures remains elusive. Here we describe a previously uncharacterized protein, MISP (C19orf21), as a substrate of Plk1 that is required for correct mitotic spindle positioning. MISP is an actin-associated protein throughout the cell cycle. MISP depletion led to an impaired metaphase-to-anaphase transition, which depended on phosphorylation by Plk1. Loss of MISP induced mitotic defects including spindle misorientation accompanied by shortened astral microtubules. Furthermore, we find that MISP formed a complex with and regulated the cortical distribution of the +TIP binding protein p150glued, a subunit of the dynein–dynactin complex. We propose that Plk1 phosphorylates MISP, thus stabilizing cortical and astral microtubule attachments required for proper mitotic spindle positioning.

scholarly journals A mitotic SKAP isoform regulates spindle positioning at astral microtubule plus ends

2016 ◽  
Vol 213 (3) ◽  
pp. 315-328 ◽  
Author(s):  
David M. Kern ◽  
Peter K. Nicholls ◽  
David C. Page ◽  
Iain M. Cheeseman
Keyword(s):  
Chromosome Segregation ◽  
Mitotic Spindle ◽  
Mitotic Chromosome ◽  
Cell Cortex ◽  
Microtubule Binding ◽  
Spindle Positioning ◽  
Astral Microtubule ◽  
Chromosome Alignment ◽  
Pulling Forces ◽  
Mitotic Cells

The Astrin/SKAP complex plays important roles in mitotic chromosome alignment and centrosome integrity, but previous work found conflicting results for SKAP function. Here, we demonstrate that SKAP is expressed as two distinct isoforms in mammals: a longer, testis-specific isoform that was used for the previous studies in mitotic cells and a novel, shorter mitotic isoform. Unlike the long isoform, short SKAP rescues SKAP depletion in mitosis and displays robust microtubule plus-end tracking, including localization to astral microtubules. Eliminating SKAP microtubule binding results in severe chromosome segregation defects. In contrast, SKAP mutants specifically defective for plus-end tracking facilitate proper chromosome segregation but display spindle positioning defects. Cells lacking SKAP plus-end tracking have reduced Clasp1 localization at microtubule plus ends and display increased lateral microtubule contacts with the cell cortex, which we propose results in unbalanced dynein-dependent cortical pulling forces. Our work reveals an unappreciated role for the Astrin/SKAP complex as an astral microtubule mediator of mitotic spindle positioning.

scholarly journals Mitochondria-driven assembly of a cortical anchor for mitochondria and dynein

2017 ◽  
Vol 216 (10) ◽  
pp. 3061-3071 ◽  
Author(s):  
Lauren M. Kraft ◽  
Laura L. Lackner
Keyword(s):  
Plasma Membrane ◽  
Mitotic Spindle ◽  
Cell Cortex ◽  
Dual Function ◽  
Mitochondrial Inheritance ◽  
Cellular Functions ◽  
Core Component ◽  
Spindle Positioning ◽  
The Core ◽  
Contact Sites

Interorganelle contacts facilitate communication between organelles and impact fundamental cellular functions. In this study, we examine the assembly of the MECA (mitochondria–endoplasmic reticulum [ER]–cortex anchor), which tethers mitochondria to the ER and plasma membrane. We find that the assembly of Num1, the core component of MECA, requires mitochondria. Once assembled, Num1 clusters persistently anchor mitochondria to the cell cortex. Num1 clusters also function to anchor dynein to the plasma membrane, where dynein captures and walks along astral microtubules to help orient the mitotic spindle. We find that dynein is anchored by Num1 clusters that have been assembled by mitochondria. When mitochondrial inheritance is inhibited, Num1 clusters are not assembled in the bud, and defects in dynein-mediated spindle positioning are observed. The mitochondria-dependent assembly of a dual-function cortical anchor provides a mechanism to integrate the positioning and inheritance of the two essential organelles and expands the function of organelle contact sites.

scholarly journals The forces that position a mitotic spindle asymmetrically are tethered until after the time of spindle assembly

2004 ◽  
Vol 167 (2) ◽  
pp. 245-256 ◽  
Author(s):  
Jean-Claude Labbé ◽  
Erin K. McCarthy ◽  
Bob Goldstein
Keyword(s):  
Mitotic Spindle ◽  
Spindle Assembly ◽  
Cell Cortex ◽  
Par Proteins ◽  
Temporal Regulation ◽  
C Elegans ◽  
Pulling Forces ◽  
Chromosome Separation ◽  
And Shifts ◽  
Early Phases

Regulation of the mitotic spindle's position is important for cells to divide asymmetrically. Here, we use Caenorhabditis elegans embryos to provide the first analysis of the temporal regulation of forces that asymmetrically position a mitotic spindle. We find that asymmetric pulling forces, regulated by cortical PAR proteins, begin to act as early as prophase and prometaphase, even before the spindle forms and shifts to a posterior position. The spindle does not shift asymmetrically during these early phases due to a tethering force, mediated by astral microtubules that reach the anterior cell cortex. We show that this tether is normally released after spindle assembly and independently of anaphase entry. Monitoring microtubule dynamics by photobleaching segments of microtubules during anaphase revealed that spindle microtubules do not undergo significant poleward flux in C. elegans. Together with the known absence of anaphase A, these data suggest that the major forces contributing to chromosome separation during anaphase originate outside the spindle. We propose that the forces positioning the mitotic spindle asymmetrically are tethered until after the time of spindle assembly and that these same forces are used later to drive chromosome segregation at anaphase.

scholarly journals Cell shape impacts on the positioning of the mitotic spindle with respect to the substratum

2015 ◽  
Vol 26 (7) ◽  
pp. 1286-1295 ◽  
Author(s):  
Francisco Lázaro-Diéguez ◽  
Iaroslav Ispolatov ◽  
Anne Müsch
Keyword(s):  
Mitotic Spindle ◽  
Cell Shape ◽  
Spindle Assembly Checkpoint ◽  
Mdck Cells ◽  
Spindle Pole ◽  
Spindle Orientation ◽  
Cell Cortex ◽  
Spindle Positioning ◽  
Spindle Poles ◽  
Spindle Position

All known mechanisms of mitotic spindle orientation rely on astral microtubules. We report that even in the absence of astral microtubules, metaphase spindles in MDCK and HeLa cells are not randomly positioned along their x-z dimension, but preferentially adopt shallow β angles between spindle pole axis and substratum. The nonrandom spindle positioning is due to constraints imposed by the cell cortex in flat cells that drive spindles that are longer and/or wider than the cell's height into a tilted, quasidiagonal x-z position. In rounder cells, which are taller, fewer cortical constraints make the x-z spindle position more random. Reestablishment of astral microtubule–mediated forces align the spindle poles with cortical cues parallel to the substratum in all cells. However, in flat cells, they frequently cause spindle deformations. Similar deformations are apparent when confined spindles rotate from tilted to parallel positions while MDCK cells progress from prometaphase to metaphase. The spindle disruptions cause the engagement of the spindle assembly checkpoint. We propose that cell rounding serves to maintain spindle integrity during its positioning.

scholarly journals Cdk1-dependent destabilization of long astral microtubules is required for spindle orientation

2020 ◽  
Author(s):  
Divya Singh ◽  
Nadine Schmidt ◽  
Franziska Müller ◽  
Tanja Bange ◽  
Alexander W. Bird
Keyword(s):  
Mitotic Spindle ◽  
Cell Shape ◽  
Microtubule Dynamics ◽  
Spindle Orientation ◽  
Cell Cortex ◽  
Spindle Positioning ◽  
Tissue Organization ◽  
Microtubule Stability ◽  
Astral Microtubule ◽  
Early Mitosis

AbstractThe precise execution of mitotic spindle orientation in response to cell shape cues is important for tissue organization and development. The presence of astral microtubules extending from the centrosome towards the cell cortex is essential for this process, but little is understood about the contribution of astral microtubule dynamics to spindle positioning, or how astral microtubule dynamics are regulated spatiotemporally. The mitotic regulator Cdk1-CyclinB promotes destabilization of centrosomal microtubules and increased microtubule dynamics as cells transition from interphase to mitosis, but how Cdk1 activity specifically modulates astral microtubule stability, and whether it impacts spindle positioning, is unknown. Here we uncover a mechanism revealing that Cdk1 destabilizes astral microtubules to ensure spindle reorientation in response to cell shape. Phosphorylation of the EB1-dependent microtubule plus-end tracking protein GTSE1 by Cdk1 in early mitosis abolishes its interaction with EB1 and recruitment to microtubule plus-ends. Loss of Cdk1 activity, or mutation of phosphorylation sites in GTSE1, induces recruitment of GTSE1 to growing microtubule plus-ends in mitosis. This decreases the catastrophe frequency of astral microtubules, and causes an increase in the number of long astral microtubules reaching the cell cortex, which restrains the ability of cells to reorient spindles along the long cellular axis in early mitosis. Astral microtubules must thus not only be present, but also dynamic to allow the spindle to reorient in response to cell shape, a state achieved by selective destabilization of long astral microtubules via Cdk1.

scholarly journals Overexpression of Mdm36 reveals Num1 foci that mediate dynein-dependent microtubule sliding in budding yeast

2020 ◽  
Author(s):  
Safia Omer ◽  
Katia Brock ◽  
John Beckford ◽  
Wei-Lih Lee
Keyword(s):  
Budding Yeast ◽  
Current Model ◽  
Cytoplasmic Dynein ◽  
Cell Cortex ◽  
Direct Imaging ◽  
Spindle Positioning ◽  
Sliding Mechanism ◽  
Pulling Forces ◽  
Pulling Force

ABSTRACTCurrent model for spindle positioning requires attachment of the microtubule (MT) motor cytoplasmic dynein to the cell cortex, where it generates pulling force on astral MTs to effect spindle displacement. How dynein is anchored by cortical attachment machinery to generate large spindle-pulling forces remains unclear. Here, we show that cortical clustering of Num1, the yeast dynein attachment molecule, is limited by Mdm36. Overexpression of Mdm36 results in an overall enhancement of Num1 clustering but reveals a population of dim Num1 clusters that mediate dynein-anchoring at the cell cortex. Direct imaging shows that bud-localized, dim Num1 clusters containing only ∼6 copies of Num1 molecules mediate dynein-dependent spindle pulling via lateral MT sliding mechanism. Mutations affecting Num1 clustering interfere with mitochondrial tethering but not dynein-based spindle-pulling function of Num1. We propose that formation of small ensembles of attachment molecules is sufficient for dynein anchorage and cortical generation of large spindle-pulling force.

scholarly journals Dynein light chain 1 and a spindle-associated adaptor promote dynein asymmetry and spindle orientation

2012 ◽  
Vol 198 (6) ◽  
pp. 1039-1054 ◽  
Author(s):  
Anja K. Dunsch ◽  
Dean Hammond ◽  
Jennifer Lloyd ◽  
Lothar Schermelleh ◽  
Ulrike Gruneberg ◽  
...  
Keyword(s):  
Light Chain ◽  
Mitotic Spindle ◽  
Regulatory System ◽  
Cytoplasmic Dynein ◽  
Spindle Orientation ◽  
Growth Surface ◽  
Cell Cortex ◽  
Dynein Light Chain ◽  
Dynein Motor ◽  
Pulling Forces

The cytoplasmic dynein motor generates pulling forces to center and orient the mitotic spindle within the cell. During this positioning process, dynein oscillates from one pole of the cell cortex to the other but only accumulates at the pole farthest from the spindle. Here, we show that dynein light chain 1 (DYNLL1) is required for this asymmetric cortical localization of dynein and has a specific function defining spindle orientation. DYNLL1 interacted with a spindle-microtubule–associated adaptor formed by CHICA and HMMR via TQT motifs in CHICA. In cells depleted of CHICA or HMMR, the mitotic spindle failed to orient correctly in relation to the growth surface. Furthermore, CHICA TQT motif mutants localized to the mitotic spindle but failed to recruit DYNLL1 to spindle microtubules and did not correct the spindle orientation or dynein localization defects. These findings support a model where DYNLL1 and CHICA-HMMR form part of the regulatory system feeding back spindle position to dynein at the cell cortex.

scholarly journals Overexpression of Mdm36 reveals Num1 foci that mediate dynein-dependent microtubule sliding in budding yeast

2020 ◽  
Vol 133 (20) ◽  
pp. jcs246363 ◽  
Author(s):  
Safia Omer ◽  
Katia Brock ◽  
John Beckford ◽  
Wei-Lih Lee
Keyword(s):  
Budding Yeast ◽  
Current Model ◽  
Cytoplasmic Dynein ◽  
Cell Cortex ◽  
Direct Imaging ◽  
Spindle Positioning ◽  
Sliding Mechanism ◽  
Pulling Forces ◽  
Assembly Factor ◽  
Pulling Force

ABSTRACTThe current model for spindle positioning requires attachment of the microtubule (MT) motor cytoplasmic dynein to the cell cortex, where it generates pulling force on astral MTs to effect spindle displacement. How dynein is anchored by cortical attachment machinery to generate large spindle-pulling forces remains unclear. Here, we show that cortical clustering of Num1, the yeast dynein attachment molecule, is limited by its assembly factor Mdm36. Overexpression of Mdm36 results in an overall enhancement of Num1 clustering but reveals a population of dim Num1 clusters that mediate dynein anchoring at the cell cortex. Direct imaging shows that bud-localized, dim Num1 clusters containing around only six Num1 molecules mediate dynein-dependent spindle pulling via a lateral MT sliding mechanism. Mutations affecting Num1 clustering interfere with mitochondrial tethering but do not interfere with the dynein-based spindle-pulling function of Num1. We propose that formation of small ensembles of attachment molecules is sufficient for dynein anchorage and cortical generation of large spindle-pulling forces.This article has an associated First Person interview with the first author of the paper.

scholarly journals Tumor suppressor APC is an attenuator of spindle-pulling forces during C. elegans asymmetric cell division

2018 ◽  
Vol 115 (5) ◽  
pp. E954-E963 ◽  
Author(s):  
Kenji Sugioka ◽  
Lars-Eric Fielmich ◽  
Kota Mizumoto ◽  
Bruce Bowerman ◽  
Sander van den Heuvel ◽  
...  
Keyword(s):  
Cell Division ◽  
Tumor Suppressor ◽  
Mitotic Spindle ◽  
Asymmetric Cell Division ◽  
Cell Cortex ◽  
Dependent Manner ◽  
C Elegans ◽  
Pulling Forces ◽  
Underlying Mechanisms ◽  
Pulling Force

The adenomatous polyposis coli (APC) tumor suppressor has dual functions in Wnt/β-catenin signaling and accurate chromosome segregation and is frequently mutated in colorectal cancers. Although APC contributes to proper cell division, the underlying mechanisms remain poorly understood. Here we show that Caenorhabditis elegans APR-1/APC is an attenuator of the pulling forces acting on the mitotic spindle. During asymmetric cell division of the C. elegans zygote, a LIN-5/NuMA protein complex localizes dynein to the cell cortex to generate pulling forces on astral microtubules that position the mitotic spindle. We found that APR-1 localizes to the anterior cell cortex in a Par–aPKC polarity-dependent manner and suppresses anterior centrosome movements. Our combined cell biological and mathematical analyses support the conclusion that cortical APR-1 reduces force generation by stabilizing microtubule plus-ends at the cell cortex. Furthermore, APR-1 functions in coordination with LIN-5 phosphorylation to attenuate spindle-pulling forces. Our results document a physical basis for the attenuation of spindle-pulling force, which may be generally used in asymmetric cell division and, when disrupted, potentially contributes to division defects in cancer.

iASPP contributes to cell cortex rigidity, mitotic cell rounding, and spindle positioning

2021 ◽  
Vol 220 (12) ◽  
Author(s):  
Aurélie Mangon ◽  
Danièle Salaün ◽  
Mohamed Lala Bouali ◽  
Mira Kuzmić ◽  
Sabine Quitard ◽  
...  
Keyword(s):  
Cancer Cells ◽  
Mitotic Spindle ◽  
Spherical Geometry ◽  
Mitotic Cell ◽  
Microtubule Dynamics ◽  
Regulatory Subunit ◽  
Cell Cortex ◽  
Spindle Positioning ◽  
Chromosome Partitioning ◽  
Apoptotic Activity

iASPP is a protein mostly known as an inhibitor of p53 pro-apoptotic activity and a predicted regulatory subunit of the PP1 phosphatase, which is often overexpressed in tumors. We report that iASPP associates with the microtubule plus-end binding protein EB1, a central regulator of microtubule dynamics, via an SxIP motif. iASPP silencing or mutation of the SxIP motif led to defective microtubule capture at the cortex of mitotic cells, leading to abnormal positioning of the mitotic spindle. These effects were recapitulated by the knockdown of the membrane-to-cortex linker Myosin-Ic (Myo1c), which we identified as a novel partner of iASPP. Moreover, iASPP or Myo1c knockdown cells failed to round up upon mitosis because of defective cortical stiffness. We propose that by increasing cortical rigidity, iASPP helps cancer cells maintain a spherical geometry suitable for proper mitotic spindle positioning and chromosome partitioning.

Sign in / Sign up

Export Citation Format

Share Document