scholarly journals The research on transparent armor material technology

2020 ◽  
Vol 1507 ◽  
pp. 102014 ◽  
Author(s):  
C Zhang ◽  
J W Cao ◽  
J B Guo ◽  
F F Liu ◽  
C Wang ◽  
...  
Keyword(s):  
Material Technology ◽  
Transparent Armor

Advances in Tire Composite Theory

1973 ◽  
Vol 1 (2) ◽  
pp. 210-250 ◽  
Author(s):  
J. D. Walter ◽  
G. N. Avgeropoulos ◽  
M. L. Janssen ◽  
G. R. Potts
Keyword(s):  
Composite Material ◽  
Stress Analysis ◽  
Elastic Properties ◽  
Material Technology ◽  
Present Composite ◽  
Pneumatic Tires

Abstract Fundamentals of composite material technology are applied to the investigation of multi-ply cord-reinforced rubber systems as used in pneumatic tires. The stiffness parameters of such multi-ply systems are determined through the use of the elastic properties of the constituent cord and rubber components. The effects of coupling between the bending and stretching modes of deformation are discussed along with the limitations of present composite material technology as applied to soft rubbery systems. The predicted stiffness parameters are related to tread wear, obstacle envelopment, vibration, and stress analysis of tires.

scholarly journals Monomers, Materials and Energy from Coffee By-Products: A Review

2021 ◽  
Vol 13 (12) ◽  
pp. 6921
Author(s):  
Laura Sisti ◽  
Annamaria Celli ◽  
Grazia Totaro ◽  
Patrizia Cinelli ◽  
Francesca Signori ◽  
...  
Keyword(s):  
Circular Economy ◽  
Food Industry ◽  
Food Packaging ◽  
Low Cost ◽  
Biofuel Production ◽  
Material Technology ◽  
Coffee Production ◽  
Coffee Pulp ◽  
Coffee Waste ◽  
By Products

In recent years, the circular economy and sustainability have gained attention in the food industry aimed at recycling food industrial waste and residues. For example, several plant-based materials are nowadays used in packaging and biofuel production. Among them, by-products and waste from coffee processing constitute a largely available, low cost, good quality resource. Coffee production includes many steps, in which by-products are generated including coffee pulp, coffee husks, silver skin and spent coffee. This review aims to analyze the reasons why coffee waste can be considered as a valuable source in recycling strategies for the sustainable production of bio-based chemicals, materials and fuels. It addresses the most recent advances in monomer, polymer and plastic filler productions and applications based on the development of viable biorefinery technologies. The exploration of strategies to unlock the potential of this biomass for fuel productions is also revised. Coffee by-products valorization is a clear example of waste biorefinery. Future applications in areas such as biomedicine, food packaging and material technology should be taken into consideration. However, further efforts in techno-economic analysis and the assessment of the feasibility of valorization processes on an industrial scale are needed.

scholarly journals Investigation of Insulation Characteristics of GFRP Crossarm Subjected to Lightning Transient

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4386
Author(s):  
Muhammad Syahmi Abd Rahman ◽  
Mohd Zainal Abidin Ab Kadir ◽  
Muhamad Safwan Abd Rahman ◽  
Miszaina Osman ◽  
Shamsul Fahmi Mohd Nor ◽  
...  
Keyword(s):  
High Performance ◽  
Breakdown Strength ◽  
Fiber Reinforced Polymer ◽  
The Finite Element Method ◽  
Glass Fiber Reinforced Polymer ◽  
Material Technology ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Maximum Field ◽  
Different Parts

The advancement of material technology has contributed to the variation of high-performance composites with good electrical insulation and mechanical properties. Their usage in electrical applications has grown since then. In Malaysia, the composite made of Glass Fiber Reinforced Polymer (GFRP) has been adopted for crossarm manufacturing and has successfully served 275 kV lines for a few decades. However, the combination of extreme conditions such as lightning transient and tropical climate can impose threats to the material. These issues have become major topics of discussion among the utilities in the Southeast Asian (SEA) region, and also in previous research. In Malaysia, more than 50% of total interruptions were caused by lightning. Limited studies can be found on the composite crossarm, especially on the square tube GFRP filled crossarm used in Malaysia. Therefore, this paper proposes to study the behavior of the particular GFRP crossarm, by means of its insulation characteristics. Experimental and simulation approaches are used. Throughout the study, the GFRP specimen is known to have an average breakdown strength at 7.2 kV/mm. In addition, the CFO voltages of the crossarm at different lengths are presented, whereby the behavior under dry and wet conditions is comparably discussed. At the same time, the polarity effect on the CFO voltages is highlighted. The maximum E-fields at the immediate moment before breakdown are analyzed by adopting the finite element method (FEM). Non-uniform distribution of E-fields is witnessed at different parts of the crossarm structure. Simultaneously, the maximum field localized on the crossarm immediately before the breakdown is also presented.

Calculation of Transparent Armor Resistance to a High-Speed Impact by a Spherical Projectile

2021 ◽  
Vol 47 (2) ◽  
pp. 130-134
Author(s):  
A. N. Ishchenko ◽  
S. A. Afanas’eva ◽  
N. N. Belov ◽  
V. V. Burkin ◽  
A. S. D’yachkovskii ◽  
...  
Keyword(s):  
High Speed ◽  
High Speed Impact ◽  
Transparent Armor

Man, Institutions and Bioeconomics

2003 ◽  
Vol 14 (4) ◽  
pp. 339-355
Author(s):  
Javier Alfonso Gil
Keyword(s):  
Methodological Approach ◽  
Natural Habitat ◽  
Social Technology ◽  
Activity System ◽  
Material Technology ◽  
Political Market ◽  
System A ◽  
Biological Capacity ◽  
Growth Of Knowledge ◽  
The One

Because bioeconomics is born of the interaction between the biological activity system and its socio-economic activity system, a holistic methodological approach is essential to study the relations between them. However, it must search for increasing levels of reductionism within each discipline to delve into the ultimate nature of each one of the intervening forces, whether economic or biological. This paper explores the economic forces. Through the biological capacity to comprehend, man and by extension, society, accumulates knowledge, the fulcrum from which he is able to dominate over his natural habitat. From this ‘point d’appui’, man builds two basic tools to assist him in achieving the goal of bettering his social condition. On the one hand, he creates institutions that allow him to “live with others” and, on the other, he develops technology that helps him to “live better with others”. Institutions, also referred to as ‘social technology’, tend toward stability over time while technology or ‘material technology’, tends toward instability, which would suggest that, normally, the mechanics of change will originate in material technology and, from there, progress to social technology by way of the political market. The level of progress and development attained depends on the quantity and rate of growth of knowledge applied by a society. In the process, man and his collectivity are forced to adopt new views of their environment through new shared mental models. The concurrence of equipment and political market will ultimately become the prime mover of institutional and economic change as well as change in mentality. Both technologies must keep on an adaptive course of stable evolution since discrepancies arising between them can cause tension between the various social groups. Adequate management of technological shock is essential to avoid extreme situations of social conflict. Herein lie the most important political decisions that a government must confront over the long term.

Sign in / Sign up

Export Citation Format

Share Document