HEMT Material Technology and Epitaxial Deposition Techniques

2019 ◽  
pp. 65-79
Author(s):  
Rama Komaragiri
Keyword(s):  
Material Technology ◽  
Epitaxial Deposition ◽  
Deposition Techniques

Microstructures of SiC and Si3N4 with fibrous inclusions

1986 ◽  
Vol 44 ◽  
pp. 492-493
Author(s):  
N. J. Tighe ◽  
J. Sun ◽  
R.-M. Hu
Keyword(s):  
Vapor Deposition ◽  
Chemical Vapor ◽  
Crack Deflection ◽  
Fiber Bundles ◽  
High Temperature Strength ◽  
Graphite Fiber ◽  
Triple Junctions ◽  
Transmission Electron ◽  
Compact Graphite ◽  
Deposition Techniques

Particles of BN,and C are added in amounts of 1 to 40% to SiC and Si3N4 ceramics in order to improve their mechanical properties. The ceramics are then processed by sintering, hot-pressing and chemical vapor deposition techniques to produce dense products. Crack deflection at the particles can increase toughness. However the high temperature strength and toughness are determined byphase interactions in the environmental conditions used for testing. Examination of the ceramics by transmission electron microscopy has shown that the carbon and boron nitride particles have a fibrous texture. In the sintered aSiC ceramic the carbon appears as graphite fiber bundles in the triple junctions and as compact graphite particles within some grains. Examples of these inclusions are shown in Fig. 1A and B.

Ultra high resolution SEM at high voltage images individual fab fragments applied as molecular label to cell surface receptors

1989 ◽  
Vol 47 ◽  
pp. 70-71
Author(s):  
Klaus-Ruediger Peters
Keyword(s):  
High Resolution ◽  
High Energy ◽  
Metal Coating ◽  
Beam Diameter ◽  
Surface Receptors ◽  
Surface Mobility ◽  
Metal Atoms ◽  
Shadowing Effect ◽  
Imaging Mode ◽  
Deposition Techniques

Topographic ultra high resolution can now routinely be established on bulk samples in cold field emission scanning electron microscopy with a second generation of microscopes (FSEM) designed to provide 0.5 nm probe diameters. If such small probes are used for high magnification imaging, topographic contrast is so high that remarkably fine details can be imaged on 2DMSO/osmium-impregnated specimens at ribosome surfaces even without a metal coating. On TCH/osmium-impregnated specimens topographic resolution can be increased further if the SE-I imaging mode is applied. This requires that beam diameter and metal coating thickness be made smaller than the SE range of ~1 nm and background signal contributions be reduced. Subnanometer small probes can be obtained (only) at high accelerating voltages. Subnanometer thin continuous metal films can be produced under the following conditions: self-shadowing effect between metal atoms must be reduced through appropriate deposition techniques and surface mobility of metal atoms must be diminished through high energy sputtering and/or specimen cooling.

Advances in Tire Composite Theory

1973 ◽  
Vol 1 (2) ◽  
pp. 210-250 ◽  
Author(s):  
J. D. Walter ◽  
G. N. Avgeropoulos ◽  
M. L. Janssen ◽  
G. R. Potts
Keyword(s):  
Composite Material ◽  
Stress Analysis ◽  
Elastic Properties ◽  
Material Technology ◽  
Present Composite ◽  
Pneumatic Tires

Abstract Fundamentals of composite material technology are applied to the investigation of multi-ply cord-reinforced rubber systems as used in pneumatic tires. The stiffness parameters of such multi-ply systems are determined through the use of the elastic properties of the constituent cord and rubber components. The effects of coupling between the bending and stretching modes of deformation are discussed along with the limitations of present composite material technology as applied to soft rubbery systems. The predicted stiffness parameters are related to tread wear, obstacle envelopment, vibration, and stress analysis of tires.

scholarly journals Atmospheric Pressure Plasma Deposition of TiO2: A Review

Materials ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 2931
Author(s):  
Soumya Banerjee ◽  
Ek Adhikari ◽  
Pitambar Sapkota ◽  
Amal Sebastian ◽  
Sylwia Ptasinska
Keyword(s):  
Atmospheric Pressure ◽  
Gas Flow ◽  
Plasma Deposition ◽  
Atmospheric Pressure Plasma ◽  
Cost Savings ◽  
Historical Background ◽  
Pressure Plasma ◽  
Wide Range ◽  
The Status ◽  
Deposition Techniques

Atmospheric pressure plasma (APP) deposition techniques are useful today because of their simplicity and their time and cost savings, particularly for growth of oxide films. Among the oxide materials, titanium dioxide (TiO2) has a wide range of applications in electronics, solar cells, and photocatalysis, which has made it an extremely popular research topic for decades. Here, we provide an overview of non-thermal APP deposition techniques for TiO2 thin film, some historical background, and some very recent findings and developments. First, we define non-thermal plasma, and then we describe the advantages of APP deposition. In addition, we explain the importance of TiO2 and then describe briefly the three deposition techniques used to date. We also compare the structural, electronic, and optical properties of TiO2 films deposited by different APP methods. Lastly, we examine the status of current research related to the effects of such deposition parameters as plasma power, feed gas, bias voltage, gas flow rate, and substrate temperature on the deposition rate, crystal phase, and other film properties. The examples given cover the most common APP deposition techniques for TiO2 growth to understand their advantages for specific applications. In addition, we discuss the important challenges that APP deposition is facing in this rapidly growing field.

A Novel High-Stress Pre-Metal Dielectric Film to Improve Device Performance for sub-65nm CMOS Manufacturing

2006 ◽  
Vol 913 ◽  
Author(s):  
Young Way Teh ◽  
John Sudijono ◽  
Alok Jain ◽  
Shankar Venkataraman ◽  
Sunder Thirupapuliyur ◽  
...  
Keyword(s):  
Performance Improvement ◽  
Dielectric Film ◽  
High Stress ◽  
Significant Degree ◽  
Strain Effect ◽  
Device Performance ◽  
Hot Carrier ◽  
Tcad Simulation ◽  
Improve Device ◽  
Deposition Techniques

AbstractThis work focuses on the development and physical characteristics of a novel dielectric film for a pre-metal dielectric (PMD) application which induces a significant degree of tensile stress in the channel of a sub-65nm node CMOS structure. The film can be deposited at low temperatures to meet the requirements of NiSi integration while maintaining void-free gap fill and superior film quality such as moisture content and uniformity. A manufacturable and highly reliable oxide film has been demonstrated through both TCAD simulation and real device data, showing ~6% NMOS Ion-Ioff improvement; no Ion-Ioff improvement or degradation on PMOS. A new concept has been proposed to explain the PMD strain effect on device performance improvement. Improvement in Hot Carrier immunity is observed compared to similar existing technologies using high density plasma (HDP) deposition techniques.

scholarly journals Monomers, Materials and Energy from Coffee By-Products: A Review

2021 ◽  
Vol 13 (12) ◽  
pp. 6921
Author(s):  
Laura Sisti ◽  
Annamaria Celli ◽  
Grazia Totaro ◽  
Patrizia Cinelli ◽  
Francesca Signori ◽  
...  
Keyword(s):  
Circular Economy ◽  
Food Industry ◽  
Food Packaging ◽  
Low Cost ◽  
Biofuel Production ◽  
Material Technology ◽  
Coffee Production ◽  
Coffee Pulp ◽  
Coffee Waste ◽  
By Products

In recent years, the circular economy and sustainability have gained attention in the food industry aimed at recycling food industrial waste and residues. For example, several plant-based materials are nowadays used in packaging and biofuel production. Among them, by-products and waste from coffee processing constitute a largely available, low cost, good quality resource. Coffee production includes many steps, in which by-products are generated including coffee pulp, coffee husks, silver skin and spent coffee. This review aims to analyze the reasons why coffee waste can be considered as a valuable source in recycling strategies for the sustainable production of bio-based chemicals, materials and fuels. It addresses the most recent advances in monomer, polymer and plastic filler productions and applications based on the development of viable biorefinery technologies. The exploration of strategies to unlock the potential of this biomass for fuel productions is also revised. Coffee by-products valorization is a clear example of waste biorefinery. Future applications in areas such as biomedicine, food packaging and material technology should be taken into consideration. However, further efforts in techno-economic analysis and the assessment of the feasibility of valorization processes on an industrial scale are needed.

A review on properties, applications, and deposition techniques of antimony selenide

2021 ◽  
Vol 230 ◽  
pp. 111223
Author(s):  
Mamta ◽  
Yogesh Singh ◽  
K.K. Maurya ◽  
V.N. Singh
Keyword(s):  
Antimony Selenide ◽  
Deposition Techniques

scholarly journals Investigation of Insulation Characteristics of GFRP Crossarm Subjected to Lightning Transient

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4386
Author(s):  
Muhammad Syahmi Abd Rahman ◽  
Mohd Zainal Abidin Ab Kadir ◽  
Muhamad Safwan Abd Rahman ◽  
Miszaina Osman ◽  
Shamsul Fahmi Mohd Nor ◽  
...  
Keyword(s):  
High Performance ◽  
Breakdown Strength ◽  
Fiber Reinforced Polymer ◽  
The Finite Element Method ◽  
Glass Fiber Reinforced Polymer ◽  
Material Technology ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Maximum Field ◽  
Different Parts

The advancement of material technology has contributed to the variation of high-performance composites with good electrical insulation and mechanical properties. Their usage in electrical applications has grown since then. In Malaysia, the composite made of Glass Fiber Reinforced Polymer (GFRP) has been adopted for crossarm manufacturing and has successfully served 275 kV lines for a few decades. However, the combination of extreme conditions such as lightning transient and tropical climate can impose threats to the material. These issues have become major topics of discussion among the utilities in the Southeast Asian (SEA) region, and also in previous research. In Malaysia, more than 50% of total interruptions were caused by lightning. Limited studies can be found on the composite crossarm, especially on the square tube GFRP filled crossarm used in Malaysia. Therefore, this paper proposes to study the behavior of the particular GFRP crossarm, by means of its insulation characteristics. Experimental and simulation approaches are used. Throughout the study, the GFRP specimen is known to have an average breakdown strength at 7.2 kV/mm. In addition, the CFO voltages of the crossarm at different lengths are presented, whereby the behavior under dry and wet conditions is comparably discussed. At the same time, the polarity effect on the CFO voltages is highlighted. The maximum E-fields at the immediate moment before breakdown are analyzed by adopting the finite element method (FEM). Non-uniform distribution of E-fields is witnessed at different parts of the crossarm structure. Simultaneously, the maximum field localized on the crossarm immediately before the breakdown is also presented.

Sign in / Sign up

Export Citation Format

Share Document