scholarly journals Fracture Failure Analysis of the Energy Storage Spring of the Circuit Breaker in the 110kV Substation

2021 ◽  
Vol 2076 (1) ◽  
pp. 012094
Author(s):  
Jun Wang ◽  
Rong Huang ◽  
Haiqing Hu ◽  
Xianhui Cao ◽  
Junjun Chen ◽  
...  
Keyword(s):  
Energy Storage ◽  
Chemical Composition ◽  
Energy Spectrum ◽  
Failure Analysis ◽  
Spectrum Analysis ◽  
Circuit Breaker ◽  
Control Measures ◽  
Composition Analysis ◽  
Fracture Failure ◽  
Chemical Composition Analysis

Abstract Through a macro inspection, chemical composition analysis, hardness inspection, graphite carbon inspection and energy spectrum analysis, the reason for the break of the energy storage spring of the circuit breaker in a 110kV substation are analyzed. The results show that poor manufacturing technology and anti-corrosion technology of the spring are the main reason for its fracture. Corresponding control measures are put forward to avoid similar failures from happening again.

Analysis Analysis and Suggestions on Device Clamp Screw Fracture of 110kV Transmission Line

2014 ◽  
Vol 989-994 ◽  
pp. 69-73
Author(s):  
Xue Xia Xu ◽  
Wei Yong Li ◽  
Guang Xing Zhang ◽  
Yan Ting Feng ◽  
Hao Ke ◽  
...  
Keyword(s):  
Mechanical Property ◽  
Chemical Composition ◽  
Transmission Line ◽  
Heat Processing ◽  
Composition Analysis ◽  
Material Degradation ◽  
Edax Analysis ◽  
Fracture Failure ◽  
Microstructure Observation ◽  
Chemical Composition Analysis

Fracture failure analysis on device clamp screws of one 110kV transmission line has been carried out based on results of macro-observation, pre-tightening test, mechanical property examination, chemical composition analysis, microstructure observation, SEM observation and EDAX analysis. It is concluded that the main reason of the screw fracture lies in misuse material and improper heat processing which led to material degradation. Suggestions are put forward finally.

scholarly journals Correction: Yu, D.Q., et al. Microscopic Characteristic and Chemical Composition Analysis of Three Medicinal Plants and Surface Frosts. Molecules 2019, 24, 4548

Molecules ◽  
2021 ◽  
Vol 26 (2) ◽  
pp. 379
Author(s):  
Da Qing Yu ◽  
Xiao Jing Han ◽  
Ting Yu Shan ◽  
Rui Xu ◽  
Jin Hu ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Medicinal Plants ◽  
Composition Analysis ◽  
Microscopic Characteristic ◽  
Chemical Composition Analysis

The authors would like to correct an error in the title paper [...]

Chemical composition analysis of carbohydrate fragmentation products

2021 ◽  
Vol 156 ◽  
pp. 105112
Author(s):  
Samin Fathalinejad ◽  
Esben Taarning ◽  
Peter Christensen ◽  
Jan H. Christensen
Keyword(s):  
Chemical Composition ◽  
Composition Analysis ◽  
Chemical Composition Analysis

Research on Process Mineralogy of Potassium-Rich Shale

2010 ◽  
Vol 158 ◽  
pp. 197-203 ◽  
Author(s):  
Jie Liu ◽  
Yue Xin Han ◽  
Wan Zhong Yin
Keyword(s):  
Chemical Composition ◽  
Mineral Composition ◽  
Potassium Feldspar ◽  
Composition Analysis ◽  
Research Results ◽  
Dsc Analyses ◽  
Process Mineralogy ◽  
Mineral Compositions ◽  
Chemical Composition Analysis

The process mineralogy of potassium-rich shale from Chaoyang of Liaoning, China, was studied. Research results showed there are much less variety and smaller quantities in mineral compositions. Calculated mineral composition by means of chemical composition analysis combined with XRD, MLA, IR and TG-DSC analyses showed that main minerals with were Potassium-feldspar, muscovite, biotite and illite, and gangue minerals were quartz and small amounts of hematite. Potassium-rich minerals such as potassium-feldspar and muscovite contact smoothly with quartz respectively, and there was the direction arrangement among potassium-feldspar, quartz and muscovite in the shale. And quartz and hematite were main cement in the shale. The influences of the research results on the potassium extraction from potassium-rich shale were distinct.

The Fracture Failure Analysis of Precision Centrifuge Spindle

2014 ◽  
Vol 971-973 ◽  
pp. 802-805
Author(s):  
Wei Feng Zhang ◽  
Li Yan ◽  
Fu Xia Zhang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Chemical Composition ◽  
Fracture Mechanics ◽  
Failure Analysis ◽  
Fatigue Failure ◽  
High Speed ◽  
Experimental Results ◽  
Fracture Failure ◽  
Scanning Electron

For the problem of high-speed rotating centrifuge spindle fracture failures, relevant analyses are conducted from the perspective of microstructure, chemical composition and fracture mechanics by using scanning electron microscopy and related instruments. Experimental results and analyses indicate that the spindle fracture is fatigue failure, mainly caused by cold cracks generated on the journal surfacing. Based on the analysis results, improvements and measures are suggested to better solve the spindle weld fracture failure problems.

scholarly journals Chemical composition analysis of the essential oil of Solanumn nigrum L. by HS/SPME method and calculation of the biochemical coefficients of the components

2017 ◽  
Vol 10 ◽  
pp. S2372-S2375 ◽  
Author(s):  
Avat (Arman) Taherpour ◽  
Mohammad Mehdi Khodaei ◽  
Baram Ahmed Hama Ameen ◽  
Majid Ghaitouli ◽  
Nosratollah Mahdizadeh ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Essential Oil ◽  
Composition Analysis ◽  
Chemical Composition Analysis

Fracture Failure Research on Feculence Discharge Pipe of LPG Spherical Tanks

2014 ◽  
Author(s):  
Wang Chen ◽  
Chen Jin ◽  
Cai XiaoHui ◽  
Wang YinPei
Keyword(s):  
Energy Spectrum ◽  
Spectrum Analysis ◽  
Sem Analysis ◽  
Corrosion Products ◽  
Welding Residual Stress ◽  
Liquefied Petroleum Gas ◽  
Metallographic Examination ◽  
Fracture Failure ◽  
Energy Spectrum Analysis ◽  
Discharge Pipe

The rupturing of feculence discharge pipe happened during the gas-tightness test of LPG (Liquefied petroleum gas) spherical tanks. In order to find out the reasons of fracture failure of feculence discharge pipe, the Scanning electron microscopy (SEM) analysis, mechanical property testing, metallographic examination and energy spectrum analysis of corrosion products were used. The examination results show that both chemical composition and metallographic structure are normal, and the cracking is the brittle cleavage fracture. The energy spectrum analysis of corrosion products reveals that there are many sulfides in the corrosion products. Based on the loading conditions of spherical tanks, crack morphology and corrosion products, the primary reason of pipe cracking is stress corrosion cracking induced by H2S existed in liquefied petroleum gas. So it is suggested that the examination should be fulfilled for the feculence discharge pipe of such spherical tanks, the cracked pipes should be replaced, and the welding residual stress in the pipes should be relieved before replacing operation.

Comparison of machine learning techniques to optimize the analysis of plutonium surrogate material via a portable LIBS device

2021 ◽  
Author(s):  
Ashwin P. Rao ◽  
Phillip R. Jenkins ◽  
John D. Auxier II ◽  
Michael B. Shattan
Keyword(s):  
Machine Learning ◽  
Chemical Composition ◽  
Machine Learning Techniques ◽  
Composition Analysis ◽  
Learning Techniques ◽  
Chemical Composition Analysis

Enhancing the analytical capabilities of a hand-held LIBS device for chemical composition analysis of a plutonium surrogate using different machine learning paradigms.

Sign in / Sign up

Export Citation Format

Share Document