scholarly journals On thermal problems of the solar thermal multigeneration: new nanomaterials and working fluids

2022 ◽  
Vol 2150 (1) ◽  
pp. 012006
Author(s):  
A S Dmitriev ◽  
A V Klimenko
Keyword(s):  
Heat Transfer ◽  
Electrical Energy ◽  
Solar Thermal ◽  
Thermoelectric Generation ◽  
Steam Generation ◽  
Working Fluids

Abstract The study considers various thermophysical problems, including the processes of heating new nanomaterials and nanofluids, as applied to solar thermal multigeneration (steam generation and turbine and turbineless conversion into electrical energy), as well as thermoelectric generation (solar thermoelectric generation) using new nanomaterials, including graphene and its composites. The main unsolved problems of thermohydrodynamics and heat transfer in such systems are noted.

A Review on Experimental and Numerical Investigations on Using Nanofluid in Volumetric Solar Energy Collectors

2014 ◽  
Author(s):  
Siamak Mirmasoumi ◽  
Mohammad Pourgol-Mohammad
Keyword(s):  
Heat Transfer ◽  
Power Plants ◽  
Radiant Energy ◽  
Solar Thermal ◽  
Working Fluid ◽  
Steam Generation ◽  
Solar Thermal Energy ◽  
Solar Absorption ◽  
Advantages And Disadvantages ◽  
Solar Power Plants

By a simple research in the scholarly articles, it can be realized that the tendency to using solar thermal energy has risen in the recent years due to its many reasonable advantages. In conventional solar thermal systems, HTFs (Heat Transfer Fluids) are pumped through the piping of a solar collector and after absorbing the solar radiant energy conveys it to water to make steam. No need to say that this method contains some losses via all methods of heat transfer. To solve this problem, researchers have shown that with direct steam generation, in which working fluid directly absorbs solar thermal and becomes vapor, solar power plants have the potential to be more productive. However, the aforesaid conventional HTFs don’t have efficient enough thermal properties and need to be improved. For this reason using nanofluid has become to some extent popular in heat transfer facilities like solar thermal collectors. In the present study, we are going to identify the advantages and disadvantages of using nanoparticles in direct solar absorption systems (DSASs). To achieve this, a general review on the experimental and numerical studies in this field is done. Additionally some of the most effective particles for such a special case, in which particles should have good radiative characteristics, are introduced. Finally, after discussion about the highlighted challenges of using nanofluids in DSASs, some helpful suggestions to overcome these problems will be presented.

Detailed Modeling of Parabolic Trough Collectors for the Part Load Simulation of Solar Thermal Power Plants

2012 ◽  
Author(s):  
F. Zaversky ◽  
S. Bergmann ◽  
W. Sanz
Keyword(s):  
Heat Transfer ◽  
Power Plant ◽  
Power Plants ◽  
Thermal Power ◽  
Solar Thermal ◽  
Thermal Power Plants ◽  
Steam Generation ◽  
Parabolic Trough ◽  
Solar Thermal Power ◽  
Direct Steam

Solar thermal power plants are a promising way of providing clean renewable electric energy. These plants concentrate the incoming solar direct irradiation in order to heat up a heat transfer fluid. The collected thermal energy can be stored or instantly delivered to a power block where part of the thermal energy is converted to electrical energy in a turbine with the connected generator. The parabolic trough collector plant is the today’s most developed solar thermal power plant type. There the solar irradiation is focused on receiver tubes which are concentrically placed to the focal lines of the parabolic trough collectors. A high temperature oil is pumped through these receiver tubes, which collects the heat and delivers it later on to the steam generator of the connected Rankine steam cycle. In order to improve the efficiency of these solar thermal power plants, the direct steam generation (DSG) within the parabolic trough collector receiver tubes is being investigated. Both types of parabolic trough collectors, the conventional type using oil as heat transfer fluid and the direct steam generation type, are subject of this paper. A detailed steady-state parabolic trough collector model was developed for each type, using the thermodynamic simulation software IPSEpro. The developed models consider the cosine-loss attenuation factor, the shading attenuation factor, optical losses, as well as thermal losses. Appropriate heat transfer and pressure loss correlations were implemented for both collector types. For the direct steam generation model, distinct collectors for the preheating section, the evaporation section and the superheating section were used. Furthermore, the suitable length of discretization for the modeling of one collector loop within a center-fed solar field was investigated. Calculated solar field performance data for the oil concept were compared to validated data available in open literature. Finally, a power plant simulation with each collector type, over the course of one reference day, showed the great potential of the direct steam generation, as well as the suitability of IPSEpro for running solar thermal power plant yield simulations.

scholarly journals Carbon Nanomaterial-Based Nanofluids for Direct Thermal Solar Absorption

Nanomaterials ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 1199 ◽  
Author(s):  
Nguyen Trong Tam ◽  
Nguyen Viet Phuong ◽  
Phan Hong Khoi ◽  
Phan Ngoc Minh ◽  
Masoud Afrand ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Carbon Nanomaterials ◽  
Solar Thermal ◽  
Carbon Nanomaterial ◽  
Solar Absorption ◽  
Working Fluids ◽  
Heat Transfer Fluids ◽  
Future Work ◽  
Thermal Absorption ◽  
Transfer Properties

Recently, many scientists have been making remarkable efforts to enhance the efficiency of direct solar thermal absorption collectors that depends on working fluids. There are a number of heat transfer fluids being investigated and developed. Among these fluids, carbon nanomaterial-based nanofluids have become the candidates with the most potential by the heat absorbing and transfer properties of the carbon nanomaterials. This paper provides an overview of the current achievements in preparing and exploiting carbon nanomaterial-based nanofluids to direct thermal solar absorption. In addition, a brief discussion of challenges and recommendations for future work is presented.

scholarly journals Numerical Evaluation of a HVAC System Based on a High-Performance Heat Transfer Fluid

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3298
Author(s):  
Gianpiero Colangelo ◽  
Brenda Raho ◽  
Marco Milanese ◽  
Arturo de Risi
Keyword(s):  
Heat Transfer ◽  
High Performance ◽  
Cooling System ◽  
Electrical Energy ◽  
Simulation Software ◽  
Heat Transfer Fluid ◽  
Hvac System ◽  
Dynamic Simulations ◽  
Heating And Cooling ◽  
The University

Nanofluids have great potential to improve the heat transfer properties of liquids, as demonstrated by recent studies. This paper presents a novel idea of utilizing nanofluid. It analyzes the performance of a HVAC (Heating Ventilation Air Conditioning) system using a high-performance heat transfer fluid (water-glycol nanofluid with nanoparticles of Al2O3), in the university campus of Lecce, Italy. The work describes the dynamic model of the building and its heating and cooling system, realized through the simulation software TRNSYS 17. The use of heat transfer fluid inseminated by nanoparticles in a real HVAC system is an innovative application that is difficult to find in the scientific literature so far. This work focuses on comparing the efficiency of the system working with a traditional water-glycol mixture with the same system that uses Al2O3-nanofluid. The results obtained by means of the dynamic simulations have confirmed what theoretically assumed, indicating the working conditions of the HVAC system that lead to lower operating costs and higher COP and EER, guaranteeing the optimal conditions of thermo-hygrometric comfort inside the building. Finally, the results showed that the use of a nanofluid based on water-glycol mixture and alumina increases the efficiency about 10% and at the same time reduces the electrical energy consumption of the HVAC system.

scholarly journals Modification of a Solar Thermal Collector to Promote Heat Transfer inside an Evacuated Tube Solar Thermal Absorber

2021 ◽  
Vol 11 (9) ◽  
pp. 4100
Author(s):  
Rasa Supankanok ◽  
Sukanpirom Sriwong ◽  
Phisan Ponpo ◽  
Wei Wu ◽  
Walairat Chandra-ambhorn ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Pipe ◽  
Solar Thermal ◽  
Heat Transfer Fluid ◽  
Small Scale ◽  
Medium Temperature ◽  
Change Behavior ◽  
Set Up ◽  
Evacuated Tube ◽  
Heating Medium

Evacuated-tube solar collector (ETSC) is developed to achieve high heating medium temperature. Heat transfer fluid contained inside a copper heat pipe directly affects the heating medium temperature. A 10 mol% of ethylene-glycol in water is the heat transfer fluid in this system. The purpose of this study is to modify inner structure of the evacuated tube for promoting heat transfer through aluminum fin to the copper heat pipe by inserting stainless-steel scrubbers in the evacuated tube to increase heat conduction surface area. The experiment is set up to measure the temperature of heat transfer fluid at a heat pipe tip which is a heat exchange area between heat transfer fluid and heating medium. The vapor/ liquid equilibrium (VLE) theory is applied to investigate phase change behavior of the heat transfer fluid. Mathematical model validated with 6 experimental results is set up to investigate the performance of ETSC system and evaluate the feasibility of applying the modified ETSC in small-scale industries. The results indicate that the average temperature of heat transfer fluid in a modified tube increased to 160.32 °C which is higher than a standard tube by approximately 22 °C leading to the increase in its efficiency by 34.96%.

scholarly journals Comparison of Li2CO3-Na2CO3-K2CO3, KCl-MgCl2 and NaNO3-KNO3 as heat transfer fluid for different sCO2 and steam power cycles in CSP tower plant under different DNI conditions

2021 ◽  
Vol 13 (4) ◽  
pp. 168781402110119
Author(s):  
Kamran Mahboob ◽  
Awais A Khan ◽  
Muhammad Adeel Khan ◽  
Jawad Sarwar ◽  
Tauseef A Khan
Keyword(s):  
Heat Transfer ◽  
Power Plant ◽  
Rankine Cycle ◽  
Capacity Factor ◽  
Solar Thermal ◽  
Heat Transfer Fluid ◽  
Incident Power ◽  
Steam Power ◽  
Power Cycles ◽  
Plant Configuration

This work presents the characteristics of a solar thermal tower power plant in two different places (Seville and Dubai) using three different HTFs (NaNO3-KNO3, KCl-MgCl2 and Li2CO3-Na2CO3-K2CO3) and three different power cycles (Rankine, sCO2 Recompression and sCO2 Partial cooling cycles). An indirect configuration is considered for the Gemasolar power plant. Detailed modelling is carried out for the conversion of incident power on the heliostat to the output electricity. Optimization of the cycle is carried out to determine the most promising cycle configuration for efficiency. The results showed that for the Gemasolar power plant configuration, the performance of the KCl-MgCl2 based plant was poorest amongst all. NaNO3-KNO3 based plant has shown good performance with the Rankine cycle but plant having Li2CO3-Na2CO3-K2CO3 as HTF was best for all three cycles. Partial cooling was the best performing cycle at both locations with all three HTFs. Placing the Seville Plant in Dubai has improved the efficiency from 23.56% to 24.33%, a capacity factor improvement of 21 and 52 GW additional power is generated. The optimization of the plant in Dubai has shown further improvements. The efficiency is improved, the Capacity factor is increased by 31.2 and 77.8 GW of additional electricity is produced.

Comparison of Two Linear Collectors in Solar Thermal Plants: Parabolic Trough vs Fresnel

2011 ◽  
Author(s):  
A. Giostri ◽  
M. Binotti ◽  
P. Silva ◽  
E. Macchi ◽  
G. Manzolini
Keyword(s):  
Power Plants ◽  
Thermal Power ◽  
Solar Thermal ◽  
Heat Transfer Fluid ◽  
Steam Generation ◽  
Parabolic Trough ◽  
Research Activity ◽  
Optical Efficiency ◽  
Synthetic Oil ◽  
Yearly Average

Parabolic trough can be considered the state of the art for solar thermal power plants thanks to the almost 30 years experience gained in SEGS and, recently, Nevada Solar One plants in US and Andasol plants in Spain. One of the major issues that limits the wide diffusion of this technology is the high investment cost of the solar field and, particularly, of the solar collector. For this reason, since several years research activity has been trying to develop new solutions with the aim of cost reduction. This work compares commercial Fresnel technology with conventional parabolic trough plant based on synthetic oil as heat transfer fluid at nominal conditions and evaluates yearly average performances. In both technologies, no thermal storage system is considered. In addition, for Fresnel, a Direct Steam Generation (DSG) case is investigated. Performances are calculated by a commercial code, Thermoflex®, with dedicated component to evaluate solar plant. Results will show that, at nominal conditions, Fresnel technology have an optical efficiency of 67% which is lower than 75% of parabolic trough. Calculated net electric efficiency is about 19.25%, while parabolic trough technology achieves 23.6%. In off-design conditions, the gap between Fresnel and parabolic trough increases because the former is significantly affected by high radiation incident angles. The calculated sun-to-electric annual average efficiency for Fresnel plant is 10.2%, consequence of the average optical efficiency of 38.8%, while parabolic trough achieve an overall efficiency of 16%, with an optical one of 52.7%. An additional case with Fresnel collector and synthetic oil outlines differences among investigated cases. Finally, because part of performance difference between PT and Fresnel is simple due to different definitions, additional indexes are introduced in order to make a consistent comparison.

Sign in / Sign up

Export Citation Format

Share Document