scholarly journals Integrated development of low-temperature thermal waters

2022 ◽  
Vol 2150 (1) ◽  
pp. 012032
Author(s):  
D A Alkhasova ◽  
B A Alkhasov
Keyword(s):  
Low Temperature ◽  
Thermal Water ◽  
District Heating ◽  
Hot Water ◽  
Thermal Waters ◽  
Integrated Development ◽  
A Value ◽  
Heat Potential ◽  
Biological Complexes

Abstract The research concerns the efficient development of low-potential thermal waters in the East-Ciscaucasian artesian basin. A technology is proposed for the integrated development of low-temperature thermal water, using its heat potential for district heating and hot water supply, as well the water itself for various water management purposes, with its quality previously brought to the standards of drinking water. Various chemical water treatment units are suggested for this purpose, with their design and technological features being formed depending on the quality of the source water. The system will enable the maximization of the resource potential of the geothermal well and its all-year-round operation. The paper shows the efficiency of using the potential of geothermal energy resources in energy- biological complexes. The geothermal-biogas technology with the integrated application of thermal waters for various needs is presented. Such thermal water utilization provides for the most efficient use of its thermal potential with a decrease in temperature to a value close to the ambient temperature.

scholarly journals Local Heating Networks with Waste Heat Utilization: Low or Medium Temperature Supply?

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 954 ◽  
Author(s):  
Hanne Kauko ◽  
Daniel Rohde ◽  
Armin Hafner
Keyword(s):  
Low Temperature ◽  
Heat Pump ◽  
Urban Areas ◽  
Waste Heat ◽  
Local Heating ◽  
District Heating ◽  
Heat Pumps ◽  
Hot Water ◽  
Local Network ◽  
Medium Temperature

District heating enables an economical use of energy sources that would otherwise be wasted to cover the heating demands of buildings in urban areas. For efficient utilization of local waste heat and renewable heat sources, low distribution temperatures are of crucial importance. This study evaluates a local heating network being planned for a new building area in Trondheim, Norway, with waste heat available from a nearby ice skating rink. Two alternative supply temperature levels have been evaluated with dynamic simulations: low temperature (40 °C), with direct utilization of waste heat and decentralized domestic hot water (DHW) production using heat pumps; and medium temperature (70 °C), applying a centralized heat pump to lift the temperature of the waste heat. The local network will be connected to the primary district heating network to cover the remaining heat demand. The simulation results show that with a medium temperature supply, the peak power demand is up to three times higher than with a low temperature supply. This results from the fact that the centralized heat pump lifts the temperature for the entire network, including space and DHW heating demands. With a low temperature supply, heat pumps are applied only for DHW production, which enables a low and even electricity demand. On the other hand, with a low temperature supply, the district heating demand is high in the wintertime, in particular if the waste heat temperature is low. The choice of a suitable supply temperature level for a local heating network is hence strongly dependent on the temperature of the available waste heat, but also on the costs and emissions related to the production of district heating and electricity in the different seasons.

scholarly journals RELaTED Project: New Developments on Ultra-Low Temperature District Heating Networks

Proceedings ◽  
2020 ◽  
Vol 65 (1) ◽  
pp. 25
Author(s):  
Antonio Garrido Marijuan ◽  
Roberto Garay ◽  
Mikel Lumbreras ◽  
Víctor Sánchez ◽  
Olga Macias ◽  
...  
Keyword(s):  
Low Temperature ◽  
High Performance ◽  
Waste Heat ◽  
District Heating ◽  
Hot Water ◽  
Thermal Systems ◽  
Heating Source ◽  
Wide Range ◽  
Thermal Sources ◽  
Heating Networks

District heating networks deliver around 13% of the heating energy in the EU, being considered as a key element of the progressive decarbonization of Europe. The H2020 REnewable Low TEmperature District project (RELaTED) seeks to contribute to the energy decarbonization of these infrastructures through the development and demonstration of the following concepts: reduction in network temperature down to 50 °C, integration of renewable energies and waste heat sources with a novel substation concept, and improvement on building-integrated solar thermal systems. The coupling of renewable thermal sources with ultra-low temperature district heating (DH) allows for a bidirectional energy flow, using the DH as both thermal storage in periods of production surplus and a back-up heating source during consumption peaks. The ultra-low temperature enables the integration of a wide range of energy sources such as waste heat from industry. Furthermore, RELaTED also develops concepts concerning district heating-connected reversible heat pump systems that allow to reach adequate thermal levels for domestic hot water as well as the use of the network for district cooling with high performance. These developments will be demonstrated in four locations: Estonia, Serbia, Denmark, and Spain.

scholarly journals Overview of Solutions for the Low-Temperature Operation of Domestic Hot-Water Systems with a Circulation Loop

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3350
Author(s):  
Theofanis Benakopoulos ◽  
William Vergo ◽  
Michele Tunzi ◽  
Robbe Salenbien ◽  
Svend Svendsen
Keyword(s):  
Low Temperature ◽  
Heat Loss ◽  
District Heating ◽  
Heating System ◽  
Hot Water ◽  
Heating Power ◽  
Circulation Loop ◽  
Space Heating ◽  
District Heating System ◽  
Domestic Hot Water

The operation of typical domestic hot water (DHW) systems with a storage tank and circulation loop, according to the regulations for hygiene and comfort, results in a significant heat demand at high operating temperatures that leads to high return temperatures to the district heating system. This article presents the potential for the low-temperature operation of new DHW solutions based on energy balance calculations and some tests in real buildings. The main results are three recommended solutions depending on combinations of the following three criteria: district heating supply temperature, relative circulation heat loss due to the use of hot water, and the existence of a low-temperature space heating system. The first solution, based on a heating power limitation in DHW tanks, with a safety functionality, may secure the required DHW temperature at all times, resulting in the limited heating power of the tank, extended reheating periods, and a DH return temperature of below 30 °C. The second solution, based on the redirection of the return flow from the DHW system to the low-temperature space heating system, can cool the return temperature to the level of the space heating system return temperature below 35 °C. The third solution, based on the use of a micro-booster heat pump system, can deliver circulation heat loss and result in a low return temperature below 35 °C. These solutions can help in the transition to low-temperature district heating.

scholarly journals Exergy Analyses of Low-Temperature District Heating Systems With Different Sanitary Hot-Water Boosters

Entropy ◽  
2019 ◽  
Vol 21 (4) ◽  
pp. 388
Author(s):  
Poredoš ◽  
Kitanovski ◽  
Poredoš
Keyword(s):  
Low Temperature ◽  
Winter Season ◽  
District Heating ◽  
Intersection Point ◽  
Exergy Efficiency ◽  
Hot Water ◽  
Heating Systems ◽  
District Heating Systems ◽  
Different Types ◽  
Exergy Analyses

This paper presents an exergy-efficiency analysis of low-temperature district heating systems (DHSs) with different sanitary hot-water (SHW) boosters. The required temperature of the sanitary hot water (SHW) was set to 50 °C. The main objective of this study was to compare the exergy efficiencies of a DHS without a booster to DHSs with three different types of boosters, i.e., electric-, gas-boiler- and heat-pump-based, during the winter and summer seasons. To achieve this, we developed a generalized model for the calculation of the exergy efficiency of a DHS with or without the booster. The results show that during the winter season, for a very low relative share of SHW production, the DHS without the booster exhibits favorable exergy efficiencies compared to the DHSs with boosters. By increasing this share, an intersection point above 45 °C for the supply temperatures, at which the higher exergy efficiency of a DHS with a booster prevails, can be identified. In the summer season the results show that a DHS without a booster at a supply temperature above 70 °C achieves lower exergy efficiencies compared to DHSs with boosters at supply temperatures above 40 °C. The results also show that ultra-low supply and return temperatures should be avoided for the DHSs with boosters, due to higher rates of entropy generation.

scholarly journals Possibility of using adsorption refrigeration unit in district heating network

2015 ◽  
Vol 36 (3) ◽  
pp. 15-24 ◽  
Author(s):  
Andrzej Grzebielec ◽  
Artur Rusowicz ◽  
Maciej Jaworski ◽  
Rafał Laskowski
Keyword(s):  
Air Conditioning ◽  
District Heating ◽  
Hot Water ◽  
Transitional Period ◽  
Heat Sources ◽  
Adsorption Refrigeration ◽  
Refrigeration Equipment ◽  
A Value ◽  
Refrigeration Unit ◽  
Conditioning Equipment

Abstract Adsorption refrigeration systems are able to work with heat sources of temperature starting with 50 °C. The aim of the article is to determine whether in terms of technical and economic issues adsorption refrigeration equipment can work as elements that produce cold using hot water from the district heating network. For this purpose, examined was the work of the adsorption air conditioning equipment cooperating with drycooler, and the opportunities offered by the district heating network in Warsaw during the summer. It turns out that the efficiency of the adsorption device from the economic perspective is not sufficient for production of cold even during the transitional period. The main problem is not the low temperature of the water supply, but the large difference between the coefficients of performance, COPs, of adsorption device and a traditional compressor air conditioning unit. When outside air temperature is 25 °C, the COP of the compressor type reaches a value of 4.49, whereas that of the adsorption device in the same conditions is 0.14. The ratio of the COPs is 32. At the same time ratio between the price of 1 kWh of electric power and 1 kWh of heat is only 2.85. Adsorption refrigeration equipment to be able to compete with compressor devices, should feature COPads efficiency to be greater than 1.52. At such a low driving temperature and even changing the drycooler into the evaporative cooler it is not currently possible to achieve.

scholarly journals Thermal regime of mining products in the presence of thermal water on the example of the mines of Tkvarcheli of Lenin

2021 ◽  
Author(s):  
Omar Lanchava ◽  
Shurman Oniani ◽  
Teimuraz Pirtskhalava
Keyword(s):  
Mass Transfer ◽  
Thermal Water ◽  
Heat Content ◽  
Climatic Conditions ◽  
Hot Water ◽  
Thermal Waters ◽  
Air Flow Rate ◽  
Mine Workings ◽  
Water Cut ◽  
Intense Heat

Mine workings located in the areas of the ascending movement of thermal waters are characterized by intense water flow and significant water cut. Our observations and calculations showed that when hot water is poured into the workings, mainly due to the intense heat and mass transfer from water to air, the increase in the heat content of the ventilation stream increases sharply and over 100-300 m (depending on the air flow rate) the temperature mine air saturated with water vapor becomes approximately equal to the temperature of hot waters. Therefore, without preliminary diversion or elimination of the inflow of hot water, in this case, the creation of normal climatic conditions in mine workings is practically impossible.

scholarly journals Impact of Domestic Hot Water Systems on District Heating Temperatures

Energies ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4694
Author(s):  
Tina Lidberg ◽  
Thomas Olofsson ◽  
Louise Ödlund
Keyword(s):  
Low Temperature ◽  
District Heating ◽  
Heating System ◽  
Hot Water ◽  
Space Heating ◽  
Circulation System ◽  
District Heating System ◽  
Domestic Hot Water ◽  
Temperature Levels ◽  
The Impact

When buildings become more energy effective, the temperature levels of district heating systems need to be lower to decrease the losses from the distribution system and to keep district heating a competitive alternative on the heating market. For this reason, buildings that are refurbished need to be adapted to suit low-temperature district heating. The aim of this paper is to examine whether four different energy refurbishment packages (ERPs) can be used for lowering the temperature need of a multi-family buildings space heating and domestic hot water (DHW) system as well as to analyse the impact of the DHW circulation system on the return temperature. The results show that for all ERPs examined in this study, the space heating supply temperature agreed well with the temperature levels of a low-temperature district heating system. The results show that the temperature need of the DHW system will determine the supply temperature of the district heating system. In addition, the amount of days with heating demand decreases for all ERPs, which further increases the influence of the DHW system on the district heating system. In conclusion, the DHW system needs to be improved to enable the temperature levels of a low-temperature district heating system.

Sign in / Sign up

Export Citation Format

Share Document