scholarly journals Analysis of Hydraulic Fracture Morphology and Propagation under Different Perforation Azimuth Angles

2022 ◽  
Vol 2152 (1) ◽  
pp. 012048
Author(s):  
Zhongshan Shen ◽  
Hui Xue ◽  
Zhiqiang Bai
Keyword(s):  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Fracture Propagation ◽  
Experimental System ◽  
Fracture Morphology ◽  
Azimuth Angle ◽  
Important Influence ◽  
Propagation Path ◽  
Hydraulic Fractures ◽  
True Triaxial

Abstract Perforation azimuth has an important influence on the nucleation, propagation path and morphology of hydraulic fractures. In this paper, the true triaxial hydraulic fracturing simulation experimental system is used to analyze the hydraulic fracture morphology and propagation path under different perforation azimuth angles. With the increase of the azimuth angle of perforation, the stable fracture propagation pressure of the fracturing sample also increases. When the azimuth angle of perforation is 0°, the propagation pressure is about 18 MPa, and when the azimuth angle of perforation is 90°, the propagation pressure is about 26.5 MPa, increasing by nearly 47.22%.

scholarly journals Numerical simulation of the laws of fracture propagation of multi-hole linear co-directional hydraulic fracturing

2021 ◽  
pp. 014459872198899
Author(s):  
Weiyong Lu ◽  
Changchun He
Keyword(s):  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Minimum Principle ◽  
Fracture Propagation ◽  
Axial Direction ◽  
Rock Breaking ◽  
Hydraulic Fractures ◽  
Directional Hydraulic Fracturing ◽  
Fracture Intersection ◽  
Expansion Stage

Directional rupture is one of the most important and most common problems related to rock breaking. The goal of directional rock breaking can be effectively achieved via multi-hole linear co-directional hydraulic fracturing. In this paper, the XSite software was utilized to verify the experimental results of multi-hole linear co-directional hydraulic fracturing., and its basic law is studied. The results indicate that the process of multi-hole linear co-directional hydraulic fracturing can be divided into four stages: water injection boost, hydraulic fracture initiation, and the unstable and stable propagation of hydraulic fracture. The stable expansion stage lasts longer and produces more microcracks than the unstable expansion stage. Due to the existence of the borehole-sealing device, the three-dimensional hydraulic fracture first initiates and expands along the axial direction in the bare borehole section, then extends along the axial direction in the non-bare hole section and finally expands along the axial direction in the rock mass without the borehole. The network formed by hydraulic fracture in rock is not a pure plane, but rather a curved spatial surface. The curved spatial surface passes through both the centre of the borehole and the axial direction relative to the borehole. Due to the boundary effect, the curved spatial surface goes toward the plane in which the maximum principal stress occurs. The local ground stress field is changed due to the initiation and propagation of hydraulic fractures. The propagation direction of the fractures between the fracturing boreholes will be deflected. A fracture propagation pressure that is greater than the minimum principle stress and a tension field that is induced in the leading edge of the fracture end, will aid to fracture intersection; as a result, the possibility of connecting the boreholes will increase.

Digital Fracture Characterization at Hydraulic Fracturing Test Site HFTS-Midland: Fracture Clustering, Stress Effects and Lithologic Controls

2021 ◽  
Author(s):  
Debotyam Maity ◽  
Jordan Ciezobka
Keyword(s):  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Test Site ◽  
Fracture Morphology ◽  
Rock Properties ◽  
Hydraulic Fractures ◽  
Strong Positive Correlation ◽  
Fracture Roughness ◽  
Fracture Characterization ◽  
Stress Effects

Abstract In this case study, we apply a novel fracture imaging and interpretation workflow to take a systematic look at hydraulic fractures captured during thorugh fracture coring at the Hydraulic Fracturing Test Site (HFTS) in Midland Basin. Digital fracture maps rendered using high resolution 3D laser scans are analyzed for fracture morphology and roughness. Analysis of hydraulic fracture faces show that the roughness varies systematically in clusters with average cluster separation of approximately 20' along the core. While isolated smooth hydraulic fractures are observed in the dataset, very rough fractures are found to be accompanied by proximal smoother fractures. Roughness distribution also helps understand the effect of stresses on fracture distribution. Locally, fracture roughness seems to vary with fracture orientations indicating possible inter-fracture stress effects. At the scale of stage lengths however, we see evidence of inter-stage stress effects. We also observe fracture morphology being strongly driven by rock properties and changes in lithology. Identified proppant distribution along the cored interval is also correlated with roughness variations and we observe strong positive correlation between proppant concentrations and fracture roughness at the local scale. Finally, based on the observed distribution of hydraulic fracture properties, we propose a conceptual spatio-temporal model of fracture propagation which can help explain the hydraulic fracture roughness distribution and ties in other observations as well.

A Peridynamics Model for the Propagation of Hydraulic Fractures in Heterogeneous, Naturally Fractured Reservoirs

2015 ◽  
Author(s):  
Hisanao Ouchi ◽  
Amit Katiyar ◽  
John T. Foster ◽  
Mukul M. Sharma
Keyword(s):  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Fracture Propagation ◽  
Two Dimensions ◽  
Natural Fracture ◽  
Hydraulic Fractures ◽  
Natural Fractures ◽  
Fracture Networks ◽  
Complex Fracture ◽  
Nonlocal Continuum Theory

Abstract A novel fully coupled hydraulic fracturing model based on a nonlocal continuum theory of peridynamics is presented and applied to the fracture propagation problem. It is shown that this modeling approach provides an alternative to finite element and finite volume methods for solving poroelastic and fracture propagation problems and offers some clear advantages. In this paper we specifically investigate the interaction between a hydraulic fracture and natural fractures. Current hydraulic fracturing models remain limited in their ability to simulate the formation of non-planar, complex fracture networks. The peridynamics model presented here overcomes most of the limitations of existing models and provides a novel approach to simulate and understand the interaction between hydraulic fractures and natural fractures. The model predictions in two-dimensions have been validated by reproducing published experimental results where the interaction between a hydraulic fracture and a natural fracture is controlled by the principal stress contrast and the approach angle. A detailed parametric study involving poroelasticity and mechanical properties of the rock is performed to understand why a hydraulic fracture gets arrested or crosses a natural fracture. This analysis reveals that the poroelasticity, resulting from high fracture fluid leak-off, has a dominant influence on the interaction between a hydraulic fracture and a natural fracture. In addition, the fracture toughness of the rock, the toughness of the natural fracture, and the shear strength of the natural fracture also affect the interaction between a hydraulic fracture and a natural fracture. Finally, we investigate the interaction of multiple completing fractures with natural fractures in two-dimensions and demonstrate the applicability of the approach to simulate complex fracture networks on a field scale.

scholarly journals Experimental and Numerical Investigation on Hydraulic Fracture Propagation Law of Composite Rock Materials considering the Disturbing Stress Effect

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-20
Author(s):  
Xin Zhang ◽  
Yuqi Zhang ◽  
Tao Zhang
Keyword(s):  
Hydraulic Fracture ◽  
Fracture Zone ◽  
Fracture Propagation ◽  
Bedding Plane ◽  
Propagation Path ◽  
Propagation Mode ◽  
Hydraulic Fractures ◽  
Stress Effect ◽  
Propagation Law ◽  
Hydraulic Fracture Propagation

The stress disturbance effect will significantly affect the propagation path of hydraulic fractures in the composite rock reservoir. To reveal the influence mechanism of stress disturbance effect on the hydraulic fracture propagation, several groups of laboratory tests and simulation tests were carried out. The test results showed that the hydraulic fracture tip formed a disturbing stress field because of the pore water pressure. Before the hydraulic fracture was extended to the bedding plane, the bedding plane had been damaged under stress disturbance, and the disturbed fracture zone was formed. The propagation mode of hydraulic fracture at the bedding plane was highly sensitive to the formation of the disturbed fracture zone. The sensitivity is mainly reflected from two aspects. (1) Under the action of the hydraulic fracture tip disturbance stress, many microfractures are generated and penetrated into the disturbance fracture zone on the bedding plane. This behavior is accompanied by energy dissipation causing the bedding plane material to be significantly softened, and the energy required for hydraulic fracture propagation is reduced dramatically. (2) The formation of the disturbed fracture zone improves the degree of fragmentation of the bedding plane, and the permeability of the local area increases significantly, forming the dominant circulation path. The higher the development of the disturbed fracture zone, the greater the hydraulic fracture propagation tendency along the bedding plane. According to the formation characteristics of the bedding plane disturbed fracture zone, the author proposed a nonlinear fracture model of the bedding plane disturbed fracture zone and established the hydraulic fracture propagation path criterion. This paper further analyzed the influencing factors of the disturbed fracture zone’s formation conditions and found that the bedding plane’s cementation strength was the main factor affecting the development degree of the disturbed fracture zone.

scholarly journals Investigation of the Fracturing Effect Induced by the Disturbing Stress of Hydrofracturing Using the Bonded-Particle Model

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-24
Author(s):  
Xin Zhang ◽  
Yuqi Zhang ◽  
Bingxiang Huang
Keyword(s):  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Fracture Zone ◽  
Fracture Propagation ◽  
Bedding Plane ◽  
Particle Model ◽  
Hydraulic Fractures ◽  
Bedding Planes ◽  
Geological Conditions ◽  
Hydraulic Fracture Propagation

Hydraulic fracturing applications have shown a stress disturbance effect during hydraulic fracture propagation, which is often ignored. Using laboratory and discrete element numerical simulation tests, hydraulic fracture propagation under this stress disturbance is systematically studied. The results show that during hydraulic fracturing, the bedding plane is damaged by the stress disturbance, forming a bedding fracture zone (BFZ). The nonlinear fracture characteristics of the formation process of the disturbed fracture zone are revealed, and two indexes (the number of fractures in the disturbed fracture zone and the size of the disturbed fracture zone) are proposed to evaluate the fracturing effect of the stress disturbance. Based on these indexes, multifactor sensitivity tests are conducted under different geological conditions and operational factors. When the principal stress ( σ 1 ) difference is large, the number of hydraulic fractures gradually decreases from many to one, and the direction of the hydraulic fractures gradually approaches the vertical direction of σ 3 , but the change in the in situ stress condition has no obvious effect on the stress disturbance effect. The weaker the bonding strength of the bedding plane, the more significant the stress disturbance effect is, and the easier it is for the fractures to expand along the bedding plane. With increasing injection rate, the stress disturbance effect first increases and then decreases, and the hydraulic fracture propagates from along the bedding plane to cross the bedding plane. With increasing relative distance between the injection hole and bedding plane, the stress disturbance effect presents a linearly increasing trend, and the hydraulic fractures along the bedding planes extend. Based on the experimental results, the relationship between the fracturing effect of the stress disturbance and the extension mode of the hydraulic fracture is determined, and an optimization method for hydraulic fracturing in composite rock reservoirs is given. The research results can provide a theoretical basis for controlling the formation of complex fracture networks in composite rock reservoirs.

Geomechanical Template for Distributed Acoustic Sensing Strain Patterns during Hydraulic Fracturing

SPE Journal ◽  
2021 ◽  
pp. 1-12
Author(s):  
Yunhui Tan ◽  
Shugang Wang ◽  
Margaretha C. M. Rijken ◽  
Kelly Hughes ◽  
Ivan Lim Chen Ning ◽  
...  
Keyword(s):  
Finite Element ◽  
Hydraulic Fracturing ◽  
Strain Rate ◽  
Hydraulic Fracture ◽  
Strain Field ◽  
Low Frequency ◽  
Fracture Propagation ◽  
Fracture Network ◽  
Hydraulic Fractures ◽  
Distributed Acoustic Sensing

Summary Recently more distributed acoustic sensing (DAS) data have been collected during hydraulic fracturing in shale. Low-frequency DAS signals show patterns that are intuitively consistent with the understanding of the strain field around hydraulic fractures. This study uses a fracture simulator combined with a finite element solver to further understand the various patterns of the strain field caused by hydraulic fracturing. The results can serve as a “type-curve” template for the further interpretation of cross-well strain field plots. Incorporating detailed pump schedule and fracturing fluid/proppant properties, we use a hydraulic fracture simulator to generate fracture geometries, which are then passed to a finite element solver as boundary conditions for elastic-static calculation of the strain field. Because the finite element calculated strain is a tensor, it needs to be projected along the monitoring well trajectory to be comparable with the DAS strain, which is uniaxial. Moreover, the calculated strain field is transformed into a time domain using constant fracture propagation velocity. Strain rate is further derived from the simulated strain field using differentiation along the fracture propagation direction. Scenarios including a single planar hydraulic fracture, a single fracture with a discrete fracture network (DFN), and multiple planar hydraulic fractures in both vertical and horizontal directions were studied. The scenarios can be differentiated in the strain patterns on the basis of the finite element simulation results. In general, there is a tensile heart-shaped zone in front of the propagating fracture tip shown along the horizontal strain direction on both strain and strain rate plots. On the sides, there are compressional zones parallel to the fracture. The strain field projects beyond the depth where the hydraulic fracture is present. Patterns from strain rate can be used to distinguish whether the fracture is intersecting the fiber. Along the vertical direction, the transition zone depicts the upper boundary of the fracture. A complex fracture network with DFN shows a much more complex pattern compared with a single planar fracture. Multiple planar fractures show polarity reversals in horizontal fiber because of interactions between fractures. Data from the Hydraulic Fracturing Test Site 2 (HFTS2) experiment were used to validate the simulated results. The application of the study is to provide a template to better interpret hydraulic fracture characteristics using low-frequency DAS strain-monitoring data. To our understanding, there are no comprehensive templates for engineers to understand the strain signals from cross-well fiber monitoring. The results of this study will guide engineers toward better optimization of well spacing and fracturing design to minimize well interference and improve efficiency.

scholarly journals Numerical Investigation of Hydraulic Fracture Extension Based on the Meshless Method

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-16
Author(s):  
Chaoneng Zhao ◽  
Yongquan Hu ◽  
Jinzhou Zhao ◽  
Qiang Wang ◽  
Pei He ◽  
...  
Keyword(s):  
Hydraulic Fracture ◽  
Fracture Propagation ◽  
Propagation Model ◽  
Propagation Path ◽  
Hydraulic Fractures ◽  
Stress Inversion ◽  
Stress Shadow ◽  
Single Well ◽  
Hydraulic Fracture Propagation ◽  
Element Free

The fracture propagation in hydraulic fracturing is described as a nonlinear problem dynamic boundary. Due to the limitation of mesh refinement, it is difficult to obtain the real crack propagation path using conventional numerical methods. Meshless methods (MMs) are an effective method to eliminate the dependence on the computational grid in the simulation of fracture propagation. In this paper, a hydraulic fracture propagation model is established based on the element-free Galerkin (EFG) method by introducing jump and branch enrichment functions. Based on the proposed method, three types of fracturing technology are investigated. The results reveal that the stress interference between fractures has an important impact on the propagation path. For the codirectional fracturing simultaneously, fractures propagate in a repel direction. However, the new fracture is attracted and eventually trapped by the adjacent fracture in the sequential fracturing case. For the opposite simultaneous fracturing in multiwells, two fractures with a certain lateral spacing will deflect toward each other. The effect of stress shadow should be used rationally in the optimization of construction parameters; for the single well multistage fracturing, the stage spacing should be out of stress inversion area, while for the simultaneous fracturing of multiple wells, stress inversion zones should be used to maximize communication between natural fractures. Overall, this study establishes a novel and effective approach of using MM to simulate the propagation of hydraulic fractures, which can serve as a useful reference for understanding the mechanism of hydraulic fracture propagation under various conditions.

scholarly journals A Model for Multiple Hydraulic Fracture Propagation with Thermo-Hydro-Mechanical Coupling Effects

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 894
Author(s):  
Tianwei Sun ◽  
Qingdong Zeng ◽  
Huilin Xing
Keyword(s):  
Thermal Stress ◽  
Hydraulic Fracture ◽  
Fracture Propagation ◽  
Displacement Discontinuity ◽  
Propagation Path ◽  
Hydraulic Fractures ◽  
Multiple Fractures ◽  
Mechanical Coupling ◽  
Uniform Growth ◽  
Hydraulic Fracture Propagation

In this study, a coupled thermo-hydro-mechanical model to simulate multiple hydraulic fracture propagation is presented. Fracture propagation with elastic deformation is described by using a displacement discontinuity method. The temperature distribution and induced thermal stress are calculated via a semi-analytical method in an explicit way. An iterative scheme is proposed to solve the coupling between fracture propagation with fluid flow and induced thermal stress. The numerical model is validated against related analytical solutions. Several numerical cases are modeled to investigate the controlling factors for uniform growth of multiple fractures. Results show that using non-uniform fracture spacings and proper increasing the spacing for fractures away from the heel of wellbore promote the uniform growth of multiple fractures by comparison with using uniform fracture spacings. Increasing the perforation diameter for the middle cluster also works. Besides, single-wing fracturing could greatly improve the uniform growth of multiple hydraulic fractures. Finally, it shows that the thermal stress has a significant influence on fracture geometrical size but has limited effect on fracture propagation path. In addition, the thermal effect promotes the uniform growth of multiple fractures.

scholarly journals Experimental Investigation on the Propagation of Hydraulic Fractures through Coal-Rock Interfaces

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Pengfei Wu ◽  
Jianlong Wang ◽  
Xiaofei Luo ◽  
Rujun Mo ◽  
Yaoqing Hu ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Strain Energy Release ◽  
Fracture Morphology ◽  
Fracture Pattern ◽  
Coal Bed ◽  
Hydraulic Fractures ◽  
Coal Seams ◽  
Crack Network ◽  
True Triaxial ◽  
Coal Rock

Although hydraulic fracturing has been one of the primary stimulation methods for coal-bed methane (CBM) exploration, it is difficult to be applied in soft and low-permeability coal seams due to the instability of wells in such geological structures. In order to solve the problem, an idea of indirect fracturing is proposed, that is, fractures are initiated in stable and hard rocks and then propagated to coal seams in which crack networks can be formed. To verify the feasibility of such an approach, the true triaxial hydraulic fracturing experiments were conducted using two-dimensional and three-dimensional coal-rock combination samples, respectively. This study investigates the fracture patterns, pressure variation, and fracture morphology. The results show that in the process of fracture propagation from sandy mudstones to coals, the strain energy release rate in the sandy mudstones is 10.69∼25.53 times greater than that in the coal. When the fracture has a tendency to deflect toward the lower strength coal strata, under the condition of large K2/K1, the deflection criterion will be met first and the fracture will deflect and grow into the coal strata. In addition, the complex crack network can be generated when the hydrofracture intersects the coal-rock interface and the fracture pattern is analyzed.

A Case Study Using Integrated Multi Disciplinary Approach to Model Microseismic Events During Stimulation

2021 ◽  
Author(s):  
Ghazal Izadi ◽  
Colleen Barton ◽  
Pierre-Francois Roux ◽  
Tebis Llobet ◽  
Thiago Pessoa ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Fracture Propagation ◽  
Natural Fracture ◽  
Fracture Model ◽  
Hydraulic Fractures ◽  
Natural Fractures ◽  
Unconventional Reservoir ◽  
Geological Conditions ◽  
Source Mechanisms

Abstract For tight reservoirs where hydraulic fracturing is required to enable sufficient fluid mobility for economic production, it is critical to understand the placement of induced fractures, their connectivity, extent, and interaction with natural fractures within the system. Hydraulic fracture initiation and propagation mechanisms are greatly influenced by the effect of the stress state, rock fabric and pre-existing features (e.g. natural fractures, faults, weak bedding/laminations). A pre-existing natural fracture system can dictate the mode, orientation and size of the hydraulic fracture network. A better understanding of the fracture growth phenomena will enhance productivity and also reduce the environmental footprint as less fractures can be created in a much more efficient way. Assessing the role of natural fractures and their interaction with hydraulic fractures in order to account for them in the hydraulic fracture model is achieved by leveraging microseismicity. In this study, we have used a combination of borehole and surface microseismic monitoring to get high vertical resolution locations and source mechanisms. 3D numerical modelling of hydraulic fracturing in complex geological conditions to predict fracture propagation is essential. 3D hydraulic fracturing simulation includes modelling capabilities of stimulation parameters, true 3D fracture propagation with near wellbore 3D complexity including a coupled DFN and the associated microseismic event generation capability. A 3D hydraulic fracture model was developed and validated by matching model predictions to microseismic observations. Microseismic source mechanisms are leveraged to determine the location and geometry of pre-existing features. In this study, we simulate a DFN based on the recorded seismicity of multi stage hydraulic fractures in a horizontal well. The advanced 3D hydraulic fracture modelling software can integrate effectively and efficiently data from a variety of multi-disciplinary sources and scales to create a subsurface characterization of the unconventional reservoir. By incorporating data from 3D seismic, LWD/wireline, core, completion/stimulation monitoring, and production, the software generates a holistic reservoir model embedded in a modular, multi-physics software platform of coupled numerical solvers that capture the fundamental physics of the processes being modelled. This study illustrates the importance of a powerful software tool that captures the necessary physics of stimulation to predict the effects of various completion designs and thereby ensure the most accurate representation of an unconventional reservoir response to a stimulation treatment.

Sign in / Sign up

Export Citation Format

Share Document