scholarly journals A numerical study on combustion process in a small compression ignition engine run dual-fuel mode (diesel-biogas)

2017 ◽  
Vol 801 ◽  
pp. 012095 ◽  
Author(s):  
H Ambarita ◽  
T.I Widodo ◽  
D.M Nasution
Keyword(s):  
Numerical Study ◽  
Combustion Process ◽  
Dual Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine

scholarly journals Effect of CO2 content in CNG on the combustion process in a dual-fuel compression ignition engine

2015 ◽  
Vol 162 (3) ◽  
pp. 91-101
Author(s):  
Sławomir WIERZBICKI ◽  
Maciej MIKULSKI ◽  
Michał ŚMIEJA
Keyword(s):  
Combustion Process ◽  
Gaseous Fuel ◽  
Dual Fuel ◽  
Combustion Engines ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Toxic Compounds ◽  
Alternative Sources ◽  
Effective Use ◽  
And Control

Seeking alternative sources of energy for its more effective use, reducing emissions of toxic pollutants to the atmosphere and counteracting global warming are nowadays the major areas of development in the power industry, including the design of combustion engines. Currently, the research into the use of new fuels, which may be effective sources of energy, is performed by many scientific centres. The use of biogas for production of energy in cogeneration systems is one of the ways for improvement of energy balance. In the research described herein, a dual-fuel compression ignition engine was fuelled with gaseous fuel with variable CNG and CO2 ratios. The tests were performed for engine fuelling controlled by both an original controller with the software optimised for single-fuel operation and for the injection of a pilot dose of diesel controlled by a dedicated controller enabling the adjustment and control of the injection and dose parameters. This paper presents the effect of carbon dioxide content in gaseous fuel on the combustion process and emission of toxic compounds in the engine examined.

Cylinder Specific Pressure Predictions for Advanced Dual Fuel Compression Ignition Engines Utilizing a Two-Stage Functional Data Analysis

2019 ◽  
Vol 141 (5) ◽  
Author(s):  
Xiao Huang ◽  
Lulu Kang ◽  
Mateos Kassa ◽  
Carrie Hall
Keyword(s):  
Combustion Process ◽  
Operating Parameter ◽  
Combustion Model ◽  
Dual Fuel ◽  
Compression Ignition ◽  
Cylinder Pressure ◽  
Specific Pressure ◽  
Compression Ignition Engine ◽  
Two Stage ◽  
Pressure Trace

In-cylinder pressure is a critical metric that is used to characterize the combustion process of engines. While this variable is measured on many laboratory test beds, in-cylinder pressure transducers are not common on production engines. As such, accurate methods of predicting the cylinder pressure have been developed both for modeling and control efforts. This work examines a cylinder-specific pressure model for a dual fuel compression ignition engine. This model links the key engine input variables to the critical engine outputs including indicated mean effective pressure (IMEP) and peak pressure. To identify the specific impact of each operating parameter on the pressure trace, a surrogate model was produced based on a functional Gaussian process (GP) regression approach. The pressure trace is modeled as a function of the operating parameters, and a two-stage estimation procedure is introduced to overcome various computational challenges. This modeling method is compared to a commercial dual fuel combustion model and shown to be more accurate and less computationally intensive.

scholarly journals EFFECT OF CNG IN A FUEL DOSE ON THE COMBUSTION PROCESS OF A COMPRESSION-IGNITION ENGINE

Transport ◽  
2015 ◽  
Vol 30 (2) ◽  
pp. 162-171 ◽  
Author(s):  
Maciej Mikulski ◽  
Sławomir Wierzbicki
Keyword(s):  
Natural Gas ◽  
Combustion Chamber ◽  
Alternative Fuels ◽  
Combustion Process ◽  
Diesel Oil ◽  
Dual Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Compression Ignition Engines ◽  
Main Component

Currently, one of the major trends in the research of contemporary combustion engines involves the potential use of alternative fuels. Considerable attention has been devoted to methane, which is the main component of Natural Gas (NG) and can also be obtained by purification of biogas. In compression-ignition engines fired with methane or Compressed Natural Gas (CNG), it is necessary to apply a dual-fuel feeding system. This paper presents the effect of the proportion of CNG in a fuel dose on the process of combustion. The recorded time series of pressure in a combustion chamber was used to determine the repeatability of the combustion process and the change of fuel compression-ignition delay in the combustion chamber. It has been showed that NG does not burn completely in a dual-fuel engine. The best conditions for combustion are ensured with higher concentrations of gaseous fuel. NG ignition does not take place simultaneously with diesel oil ignition. Moreover, if a divided dose of diesel is injected, NG ignition probably takes place at two points, as diesel oil.

Ethanol in a Light-Duty Dual Fuel Compression Ignition Engine: 3-D Analysis of the Combustion Process

2021 ◽  
Author(s):  
Davide Lanni ◽  
Enzo Galloni ◽  
Gustavo Fontana ◽  
Roberto Ianniello ◽  
Carlo Beatrice ◽  
...  
Keyword(s):  
Combustion Process ◽  
Dual Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Light Duty

scholarly journals Combustion Stability, Performance and Emission Characteristics of a CI Engine Fueled with Diesel/n-Butanol Blends

Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2817
Author(s):  
Arkadiusz Jamrozik ◽  
Wojciech Tutak ◽  
Karol Grab-Rogaliński
Keyword(s):  
Alternative Fuels ◽  
Specific Energy Consumption ◽  
Combustion Process ◽  
Combustion Stability ◽  
Dual Fuel ◽  
Initial Increase ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Engine Operation ◽  
Energy Share

The development of compression ignition engines depends mainly on using alternative fuels, such as alcohols. The paper presents the results of tests of a stationary compression ignition engine fueled with mixtures of diesel oil and n-butanol with an energy share from 0 to 60%. The combustion and emission results of a dual-fuel engine were compared to a conventional diesel-only engine. As part of the work, the combustion process, including changes in pressure and heat release rate, as well as exhaust emissions from the test engine, were investigated. The main operational parameters of the engine were determined, including mean indicated pressure, thermal efficiency and specific energy consumption. Moreover, the stability of the engine operation was analyzed. The research shows that the 60% addition of n-butanol to diesel fuel increases the ignition delay (by 39%) and shortens the combustion duration (by 57%). In addition, up to 40%, it results in increased pmax, HRRmax and PPRmax. The engine was characterized by the highest efficiency, equal to 41.35% when operating on DB40. In the whole range of alcohol content, the dual-fuel engine was stable. With the increase of n-butanol content to 40%, the emission of NOx increased. The lowest concentration of CO was obtained during the combustion of DB50. After the initial increase (for DB20), the THC emission was reduced to the lowest value for DB40. Increasing the energy share of alcohol to 60% resulted in a significant, more than 43 times, reduction in soot emissions.

scholarly journals Validation of a zero-dimensional and 2-phase combustion model for dual-fuel compression ignition engine simulation

2017 ◽  
Vol 21 (1 Part B) ◽  
pp. 387-399 ◽  
Author(s):  
Maciej Mikulski ◽  
Sławomir Wierzbicki
Keyword(s):  
Model Calculation ◽  
Fossil Fuels ◽  
Single Point ◽  
Combustion Process ◽  
Load Condition ◽  
Combustion Model ◽  
Dual Fuel ◽  
Calculation Error ◽  
Compression Ignition ◽  
Compression Ignition Engine

Increasing demands for the reduction of exhaust emissions and the pursuit to re-duce the use of fossil fuels require the search for new fuelling technologies in combustion engines. One of the most promising technologies is the multi-fuel compression ignition engine concept, in which a small dose of liquid fuel injected directly into the cylinder acts as the ignition inhibitor of the gaseous fuel. Achieving the optimum combustion process in such an engine requires the application of advanced control algorithms which require mathematical modelling support. In response to the growing demand for new simulation tools, a 0-D model of a dual-fuel engine was proposed and validated. The validation was performed in a broad range of engine operating points, including various speeds and load condition, as well as different natural gas/diesel blend ratios. It was demonstrated that the average model calculation error within the entire cycle did not exceed 6.2%, and was comparable to the measurement results cycle to cycle variations. The maximum model calculation error in a single point of a cycle was 15% for one of the complex (multipoint injection) cases. In other cases, it did not exceed 11%.

Sign in / Sign up

Export Citation Format

Share Document