Conjunction of gallium doping and calcium silicate mediates osteoblastic and osteoclastic performances of tricalcium phosphate bioceramics

2021 ◽  
Author(s):  
Fupo He ◽  
Chao Qiu ◽  
Teliang Lu ◽  
Xuetao Shi ◽  
Jiandong Ye
Keyword(s):  
Mechanical Strength ◽  
Tricalcium Phosphate ◽  
Calcium Silicate ◽  
Bone Defects ◽  
Osteoporotic Bone ◽  
Densification Process ◽  
Potent Effect ◽  
Inhibition Effect ◽  
Gallium Doping

Abstract Gallium-containing biomaterials are considered promising for reconstructing osteoporotic bone defects, owing to the potent effect of gallium on restraining osteoclast activities. Nevertheless, the gallium-containing biomaterials were demonstrated to disturb the osteoblast activities. In this study, tricalcium phosphate (TCP) bioceramics were modified by gallium doping in conjunction with incorporation of calcium silicate (CS). The results indicated that the incorporation of CS promoted transition of β-TCP to α-TCP, and accelerated densification process, but did not improve the mechanical strength of bioceramics. The silicon released from the composite bioceramics diminished the inhibition effect of released gallium on osteoblast activities, and maintained its effect on restraining osteoclast activities. The TCP-based bioceramics doped with 2.5 mol% gallium and incorporated with 10 mol% CS are considered suitable for treating the bone defects in the osteoporotic environment.

Multi-stage controllable degradation of strontium-doped calcium sulfate hemihydrate-Tricalcium phosphate microsphere composite as a substitute for osteoporotic bone defect repairing: Degradation behavior and bone response

2021 ◽  
Author(s):  
Qiuju Miao ◽  
Nan Jiang ◽  
Qinmeng Yang ◽  
Ismail mohamed Hussein ◽  
Zhen Luo ◽  
...  
Keyword(s):  
Tricalcium Phosphate ◽  
Calcium Sulfate ◽  
Bone Repair ◽  
Degradation Rate ◽  
Bone Defects ◽  
Osteoporotic Bone ◽  
Repair Materials ◽  
Bone Repair Materials ◽  
In Vivo Degradation

Abstract Various requirements for the repair of complex bone defects have motivated to development of scaffolds with adjustable degradation rates and biological functions. Tricalcium phosphate and calcium sulfate are the most commonly used bone repair materials in the clinic, how to better combine tricalcium phosphate and calcium sulfate and play their greatest advantages in the repair of osteoporotic bone defect is the focus of our research. In this study, a series of scaffolds with multistage-controlled degradation properties composed of strontium-doped calcium sulfate (SrCSH) and strontium-doped tricalcium phosphate microspheres (Sr-TCP) scaffolds were prepared, and their osteogenic activity, in vivo degradation and bone regeneration ability in tibia of osteoporotic rats were evaluated. In vitro studies revealed that different components of SrCSH/Sr-TCP scaffolds significantly promoted the proliferation and differentiation of MC3T3-E1 cells, which showed a good osteogenic induction activity. In vivo degradation results showed that the degradation time of composite scaffolds could be controlled in a large range (6-12 months) by controlling the porosity and phase composition of Sr-TCP microspheres. The results of osteoporotic femoral defect repair showed that when the degradation rate of scaffold matched with the growth rate of new bone, the parameters such as BMD, BV/TV, Tb.Th, angiogenesis marker CD31 and new bone formation marker OCN expression were higher, which promoted the rapid repair of osteoporotic bone defects. On the contrary, the slow degradation rate of scaffolds hindered the growth of new bone to a certain extent. This study elucidates the importance of the degradation rate of scaffolds for the repair of osteoporotic bone defects, and the design considerations can be extended to other bone repair materials, which is expected to provide new ideas for the development of tissue engineering materials in the future.

scholarly journals The preparation and application of calcium phosphate biomedical composites in filling of weight-bearing bone defects

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Lijia Cheng ◽  
Tianchang Lin ◽  
Ahmad Taha Khalaf ◽  
Yamei Zhang ◽  
Hongyan He ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Calcium Phosphate ◽  
Tricalcium Phosphate ◽  
Weight Bearing ◽  
Bone Defects ◽  
Type I ◽  
Artificial Bone ◽  
Thermosensitive Hydrogel ◽  
Bone Repairing ◽  
Histological Staining

AbstractNowadays, artificial bone materials have been widely applied in the filling of non-weight bearing bone defects, but scarcely ever in weight-bearing bone defects. This study aims to develop an artificial bone with excellent mechanical properties and good osteogenic capability. Firstly, the collagen-thermosensitive hydrogel-calcium phosphate (CTC) composites were prepared as follows: dissolving thermosensitive hydrogel at 4 °C, then mixing with type I collagen as well as tricalcium phosphate (CaP) powder, and moulding the composites at 37 °C. Next, the CTC composites were subjected to evaluate for their chemical composition, micro morphology, pore size, Shore durometer, porosity and water absorption ability. Following this, the CTC composites were implanted into the muscle of mice while the 70% hydroxyapatite/30% β-tricalcium phosphate (HA/TCP) biomaterials were set as the control group; 8 weeks later, the osteoinductive abilities of biomaterials were detected by histological staining. Finally, the CTC and HA/TCP biomaterials were used to fill the large segments of tibia defects in mice. The bone repairing and load-bearing abilities of materials were evaluated by histological staining, X-ray and micro-CT at week 8. Both the CTC and HA/TCP biomaterials could induce ectopic bone formation in mice; however, the CTC composites tended to produce larger areas of bone and bone marrow tissues than HA/TCP. Simultaneously, bone-repairing experiments showed that HA/TCP biomaterials were easily crushed or pushed out by new bone growth as the material has a poor hardness. In comparison, the CTC composites could be replaced gradually by newly formed bone and repair larger segments of bone defects. The CTC composites trialled in this study have better mechanical properties, osteoinductivity and weight-bearing capacity than HA/TCP. The CTC composites provide an experimental foundation for the synthesis of artificial bone and a new option for orthopedic patients.

scholarly journals Effect of Systemic Zoledronic Acid Dosing Regimens on Bone Regeneration in Osteoporotic Rats

2021 ◽  
Vol 11 (4) ◽  
pp. 1906
Author(s):  
Marwa Y. Shaheen ◽  
Amani M. Basudan ◽  
Abdurahman A. Niazy ◽  
Jeroen J. J. P. van den Beucken ◽  
John A. Jansen ◽  
...  
Keyword(s):  
Bone Graft ◽  
Bone Grafting ◽  
Femoral Condyle ◽  
Bone Defects ◽  
Histological Evaluation ◽  
Favorable Effect ◽  
Osteoporotic Bone ◽  
Bovine Bone ◽  
Graft Placement ◽  
Regeneration Of Bone

The aim of this study was to evaluate the regeneration of bone defects created in the femoral condyle of osteoporotic rats, following intravenous (IV) zoledronate (ZA) treatment in three settings: pre-bone grafting (ZA-Pre), post-bone grafting (ZA-Post), and pre- plus post-bone grafting (ZA-Pre+Post). Twenty-four female Wistar rats were ovariectomized (OVX). After 12 weeks, bone defects were created in the left femoral condyle. All defects were grafted with a particulate inorganic cancellous bovine bone substitute. ZA (0.04 mg/kg, weekly) was administered to six rats 4 weeks pre-bone graft placement. To another six rats, ZA was given post-bone graft placement creation and continued for 6 weeks. Additional six rats received ZA treatment pre- and post-bone graft placement. Control animals received weekly saline intravenous injections. At 6 weeks post-bone graft placement, samples were retrieved for histological evaluation of the bone area percentage (BA%) and remaining bone graft percentage (RBG%). BA% for ZA-Pre (50.1 ± 3.5%) and ZA-Post (49.2 ± 8.2%) rats was significantly increased compared to that of the controls (35.4 ± 5.4%, p-value 0.031 and 0.043, respectively). In contrast, ZA-Pre+Post rats (40.7 ± 16.0%) showed similar BA% compared to saline controls (p = 0.663). For RBG%, all experimental groups showed similar results ranging from 36.3 to 47.1%. Our data indicate that pre- or post-surgical systemic IV administration of ZA improves the regeneration of bone defects grafted with inorganic cancellous bovine-bone particles in osteoporotic bone conditions. However, no favorable effect on bone repair was seen for continued pre- plus post-surgical ZA treatment.

scholarly journals Additive Manufacturing of β-Tricalcium Phosphate Components via Fused Deposition of Ceramics (FDC)

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 156
Author(s):  
Steffen Esslinger ◽  
Axel Grebhardt ◽  
Jonas Jaeger ◽  
Frank Kern ◽  
Andreas Killinger ◽  
...  
Keyword(s):  
Tricalcium Phosphate ◽  
Critical Size ◽  
Bone Defects ◽  
Healthcare Systems ◽  
The Body ◽  
Patient Specific ◽  
Poly Lactic Acid ◽  
Fused Deposition ◽  
Poly Ethylene ◽  
Fused Deposition Of Ceramics

Bone defects introduced by accidents or diseases are very painful for the patient and their treatment leads to high expenses for the healthcare systems. When a bone defect reaches a critical size, the body is not able to restore this defect by itself. In this case a bone graft is required, either an autologous one taken from the patient or an artificial one made of a bioceramic material such as calcium phosphate. In this study β-tricalcium phosphate (β-TCP) was dispersed in a polymer matrix containing poly(lactic acid) (PLA) and poly(ethylene glycole) (PEG). These compounds were extruded to filaments, which were used for 3D printing of cylindrical scaffolds via Fused Deposition of Ceramics (FDC) technique. After shaping, the printed parts were debindered and sintered. The components combined macro- and micropores with a pore size of 1 mm and 0.01 mm, respectively, which are considered beneficial for bone healing. The compressive strength of sintered cylindrical scaffolds exceeded 72 MPa at an open porosity of 35%. The FDC approach seems promising for manufacturing patient specific bioceramic bone grafts.

scholarly journals Filling Bone Defects after Hip Arthroplasty Revision Using Hydroxyapatite/?-tricalcium Phosphate: A Case Report with Long-term Result

2021 ◽  
Vol 11 (6) ◽  
Author(s):  
Sandris Petronis ◽  
Ruta Jakusonoka ◽  
Viktors Linovs ◽  
Andris Jumtins
Keyword(s):  
Case Report ◽  
Bone Defect ◽  
Hip Arthroplasty ◽  
Tricalcium Phosphate ◽  
Periprosthetic Fracture ◽  
Bone Defects ◽  
Femoral Bone ◽  
Left Femur ◽  
Arthroplasty Revision

Introduction: The increasing number of primary total hip replacements means that there is an increased need for hip arthroplasty revisions. The periprosthetic fractures which cause bone defects can occur during removal of the femoral component and healing of these fractures can be delayed. In femoral bone defects during revisions, there are no metal augments for filling these defects. Case Report: Fifty-nine-year-old female presented with infected loosening of the left hip non-cemented endoprosthesis 5 years after surgery. The patient underwent removal of endoprosthesis. In 2 months, re-implantation of non-cemented endoprosthesis was performed and biphasic calcium phosphate (BCP) ceramic granules with hydroxyapatite/?-tricalcium phosphate (HAp/?-TCP) were implanted in the femoral bone defects. Eleven months following the arthroplasty patient had periprosthetic fracture of the distal third of the left femur. The osteosynthesis was performed and BCP ceramic granules with HAp/?-TCP were used to fill the bone defect. Long-term follow-up showed very good functional outcome and bone defect healing. Conclusion: The BCP ceramic granules with HAp/?-TCP material adjusted to the bone defect anatomy, showed effective femoral bone defect and periprosthetic fracture healing in a patient with hip arthroplasty revision and periprosthetic fracture. Keywords: Bone defect, femoral, revision.

scholarly journals Effect of Electrical Current on the Osteogenesis in Alveolar Bone Defects : Application of Tricalcium Phosphate

1987 ◽  
Vol 41 (5) ◽  
pp. 985-993 ◽  
Author(s):  
Kohzoh Kubota ◽  
Masatoshi Hitaka ◽  
Kazuo Yasumoto ◽  
Takashi Hayashikawa ◽  
Shinichi Umezaki ◽  
...  
Keyword(s):  
Tricalcium Phosphate ◽  
Alveolar Bone ◽  
Electrical Current ◽  
Bone Defects
Sign in / Sign up

Export Citation Format

Share Document