scholarly journals The study of building material quality of a low cost flats in Jakarta

2018 ◽  
Vol 195 ◽  
pp. 012082
Author(s):  
N Nurdiani ◽  
W Katarina
Keyword(s):  
Building Material ◽  
Low Cost ◽  
Material Quality

scholarly journals Interlocking Block Masonry (ISSB) for Sustainable Housing Purposes in Thailand, With Additional Examples From Cambodia and Nepal

2019 ◽  
Vol 8 (2) ◽  
pp. 42 ◽  
Author(s):  
Jan Bredenoord ◽  
Wutinai Kokkamhaeng ◽  
Pichit Janbunjong ◽  
Ongarj Nualplod ◽  
Suwatchai Thongnoy ◽  
...  
Keyword(s):  
Building Material ◽  
Building Materials ◽  
Low Cost ◽  
Building Blocks ◽  
Structural Quality ◽  
Building Structures ◽  
Sustainable Housing ◽  
Stabilized Soil ◽  
Facility Construction

This paper is about Interlocking Stabilized Soil Blocks (ISSB) as developed in Thailand. ISSB are seen as an eco-friendly building material for home building and structures such as water tanks and sanitation facilities. For several decades the Thai R&D Institute TISTR has worked on developing and testing ISSB, which in other countries are called compressed stabilized earth blocks or CSEB. The composition of building blocks and the quality of building structures determine together the structural quality of the house or building. If there is a need for earthquake- and storm resistance, the building blocks and the structures must have specific features. Building stacked houses is an important issue given the growing scarcity of land for housing and the increasing land prices. ISSB is not only applied in Thailand, but also in Cambodia for low-cost housing and in Nepal for home reconstruction after the 2015 earthquake. ISSB or CSEB is also applied in other countries as an alternative building material and technology to replace the use of fired bricks and concrete building blocks for housing. Reducing the use of cement in the materials and structures is important for environmental reasons, but in ISSB/CSEB the use of cement as a stabilizer cannot always be avoided. This is surely the case in areas where earthquakes, heavy storms and floods can occur. Although this paper focuses mainly on technical aspects of sustainable housing and construction, there is also a focus on social sustainability, meaning a strong involvement of local communities in the production of sustainable building materials for walls, newly developed construction technologies, and mutual house and facility construction.

Effect of Computerized Auditory Training on Speech Perception of Adults With Hearing Impairment

2013 ◽  
Vol 20 (3) ◽  
pp. 91-106 ◽  
Author(s):  
Rachel Pizarek ◽  
Valeriy Shafiro ◽  
Patricia McCarthy
Keyword(s):  
Hearing Loss ◽  
Speech Perception ◽  
Literature Review ◽  
Low Cost ◽  
Experimental Designs ◽  
Auditory Training ◽  
Hearing Impairments ◽  
Communicative Disorders ◽  
And Training

Computerized auditory training (CAT) is a convenient, low-cost approach to improving communication of individuals with hearing loss or other communicative disorders. A number of CAT programs are being marketed to patients and audiologists. The present literature review is an examination of evidence for the effectiveness of CAT in improving speech perception in adults with hearing impairments. Six current CAT programs, used in 9 published studies, were reviewed. In all 9 studies, some benefit of CAT for speech perception was demonstrated. Although these results are encouraging, the overall quality of available evidence remains low, and many programs currently on the market have not yet been evaluated. Thus, caution is needed when selecting CAT programs for specific patients. It is hoped that future researchers will (a) examine a greater number of CAT programs using more rigorous experimental designs, (b) determine which program features and training regimens are most effective, and (c) indicate which patients may benefit from CAT the most.

The system of indicators of the quality of the carbon-carbon composite materials and technologies of their production

2018 ◽  
pp. 127-132
Author(s):  
T. N. Antipova ◽  
D. S. Shiroyan
Keyword(s):  
Composite Material ◽  
Low Cost ◽  
Experimental Studies ◽  
Carbon Matrix ◽  
Carbon Composite ◽  
Optimal Number ◽  
Laboratory Equipment ◽  
Carbon Composite Material ◽  
Carbon Composite Materials

The system of indicators of quality of carbon-carbon composite material and technological operations of its production is proved in the work. As a result of the experimental studies, with respect to the existing laboratory equipment, the optimal number of cycles of saturation of the reinforcing frame with a carbon matrix is determined. It was found that to obtain a carbon-carbon composite material with a low cost and the required quality indicators, it is necessary to introduce additional parameters of the pitch melt at the impregnation stage.

scholarly journals Diagnostic Capabilities of a Smartphone- Based Low-Cost Microscope

2020 ◽  
Vol 6 (3) ◽  
pp. 522-525
Author(s):  
Dorina Hasselbeck ◽  
Max B. Schäfer ◽  
Kent W. Stewart ◽  
Peter P. Pott
Keyword(s):  
Low Cost ◽  
Field Of View ◽  
Parasitic Diseases ◽  
Optical Parameters ◽  
Trade Off ◽  
Resource Limited ◽  
Wide Range ◽  
Diagnostic Applications ◽  
Diagnostic Capabilities

AbstractMicroscopy enables fast and effective diagnostics. However, in resource-limited regions microscopy is not accessible to everyone. Smartphone-based low-cost microscopes could be a powerful tool for diagnostic and educational purposes. In this paper, the imaging quality of a smartphone-based microscope with four different optical parameters is presented and a systematic overview of the resulting diagnostic applications is given. With the chosen configuration, aiming for a reasonable trade-off, an average resolution of 1.23 μm and a field of view of 1.12 mm2 was achieved. This enables a wide range of diagnostic applications such as the diagnosis of Malaria and other parasitic diseases.

scholarly journals Current Trends in Polymer Based Sensors

Chemosensors ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 108
Author(s):  
Giancarla Alberti ◽  
Camilla Zanoni ◽  
Vittorio Losi ◽  
Lisa Rita Magnaghi ◽  
Raffaela Biesuz
Keyword(s):  
Chemical Structure ◽  
Low Cost ◽  
Sensing Applications ◽  
Current Trends ◽  
Manufacturing Methods ◽  
New Devices

This review illustrates various types of polymer and nanocomposite polymeric based sensors used in a wide variety of devices. Moreover, it provides an overview of the trends and challenges in sensor research. As fundamental components of new devices, polymers play an important role in sensing applications. Indeed, polymers offer many advantages for sensor technologies: their manufacturing methods are pretty simple, they are relatively low-cost materials, and they can be functionalized and placed on different substrates. Polymers can participate in sensing mechanisms or act as supports for the sensing units. Another good quality of polymer-based materials is that their chemical structure can be modified to enhance their reactivity, biocompatibility, resistance to degradation, and flexibility.

The Costs and Benefits of Shareholder Democracy: Gadflies and Low-Cost Activism

2020 ◽  
Author(s):  
Nickolay Gantchev ◽  
Mariassunta Giannetti
Keyword(s):  
Low Cost ◽  
Shareholder Value ◽  
Career Concerns ◽  
Costs And Benefits ◽  
Cross Sectional ◽  
Shareholder Proposals ◽  
Active Individual ◽  
Shareholder Democracy ◽  
To Receive

Abstract We show that there is cross-sectional variation in the quality of shareholder proposals. On average, proposals submitted by the most active individual sponsors are less likely to receive majority support, but they occasionally pass if shareholders mistakenly support them and may even be implemented due to directors’ career concerns. While gadfly proposals destroy shareholder value if they pass, shareholder proposals on average are value enhancing in firms with more informed shareholders. We conclude that more informed voting could increase the benefits associated with shareholder proposals.

scholarly journals ResUHUrge: A Low Cost and Fully Functional Ventilator Indicated for Application in COVID-19 Patients

Sensors ◽  
2020 ◽  
Vol 20 (23) ◽  
pp. 6774
Author(s):  
Francisco José Vivas Fernández ◽  
José Sánchez Segovia ◽  
Ismael Martel Bravo ◽  
Carlos García Ramos ◽  
Daniel Ruiz Castilla ◽  
...  
Keyword(s):  
Low Cost ◽  
Pulmonary Ventilation ◽  
Lung Infection ◽  
Health Condition ◽  
Multidisciplinary Research ◽  
Global North ◽  
Severity Of The Disease ◽  
Open Source Hardware ◽  
The University

Although the cure for the SARS-CoV-2 virus (COVID-19) will come in the form of pharmaceutical solutions and/or a vaccine, one of the only ways to face it at present is to guarantee the best quality of health for patients, so that they can overcome the disease on their own. Therefore, and considering that COVID-19 generally causes damage to the respiratory system (in the form of lung infection), it is essential to ensure the best pulmonary ventilation for the patient. However, depending on the severity of the disease and the health condition of the patient, the situation can become critical when the patient has respiratory distress or becomes unable to breathe on his/her own. In that case, the ventilator becomes the lifeline of the patient. This device must keep patients stable until, on their own or with the help of medications, they manage to overcome the lung infection. However, with thousands or hundreds of thousands of infected patients, no country has enough ventilators. If this situation has become critical in the Global North, it has turned disastrous in developing countries, where ventilators are even more scarce. This article shows the race against time of a multidisciplinary research team at the University of Huelva, UHU, southwest of Spain, to develop an inexpensive, multifunctional, and easy-to-manufacture ventilator, which has been named ResUHUrge. The device meets all medical requirements and is developed with open-source hardware and software.

Improving quality of life for dialysis patients through telecare

2000 ◽  
Vol 6 (1_suppl) ◽  
pp. 80-83 ◽  
Author(s):  
Karl A Stroetmann ◽  
Peter Gruetzmacher ◽  
Veli N Stroetmann
Keyword(s):  
Quality Of Life ◽  
Low Cost ◽  
Video Communication ◽  
Daily Routine ◽  
Dialysis Patients ◽  
Home Dialysis ◽  
Service Support ◽  
Initial Results ◽  
Selection Of

Home dialysis can improve the care and quality of life for patients with renal failure. We have explored the possibility of extending home care to more patients needing continuous ambulatory peritoneal dialysis (CAPD) using telemedicine. We tested videoconferencing support for five CAPD patients using low-cost ISDN equipment (128 kbit/s). Initial results indicated that it was possible to integrate video-communication into the daily routine of the clinic and the response from patients was surprisingly positive. Selection of appropriate, affordable technology and the ISDN service support by the telecommunications provider proved to be considerably more difficult than anticipated. The first indications also suggest medical advantages for home teledialysis.

Sign in / Sign up

Export Citation Format

Share Document