scholarly journals A High-Efficiency Security Monitoring Technology for New Energy Plant Station Network Border with Flow Characteristics Design

Author(s):  
Jinxiong Zhao ◽  
Jing Bai ◽  
Zhiru Li ◽  
Xun Zhang ◽  
Xiaoqin Zhu ◽  
...  
2021 ◽  
Vol 295 ◽  
pp. 117020
Author(s):  
Hai Li ◽  
Peng Zheng ◽  
Tingsheng Zhang ◽  
Yingquan Zou ◽  
Yajia Pan ◽  
...  

2019 ◽  
Vol 2019 ◽  
pp. 1-14
Author(s):  
Akram Zeid ◽  
Mohamed Shouman

Control valves have always been recognised as being among the most crucial control equipment, commonly utilised in versatile engineering applications. Hence, the need has arisen to identify the flow characteristics inside the valve, together with the incurred vibration induced as a result of the flow passing through the valve. Thanks to the tangible and fast progress made in the field of the flow simulation and numerical techniques, it has become possible to better observe the behavior of the flow passing inside a valve with view to examining its performance. Hence, the paper at hand is mainly concerned with introducing the modeling and simulation of a control valve. On the contrary, the flow system in a control valve is marked by a complex structure and nonlinear characteristics. The reasons for those qualities could be attributed to its construction as well as the fluid flow phenomena associated with it. It is especially for the sake of investigating and observing the flow characteristics, pertaining to a control valve equipped with different concave plug shapes and different openings, that the three-dimensional FSI simulation is conducted. In addition, it would be possible to make use of the obtained results relating to the three-dimensional analysis to achieve low noise and high efficiency improvement. Furthermore, all results will be validated on experimental grounds.


Processes ◽  
2019 ◽  
Vol 7 (12) ◽  
pp. 949 ◽  
Author(s):  
Yan Jin ◽  
Xiaoke He ◽  
Ye Zhang ◽  
Shanshan Zhou ◽  
Hongcheng Chen ◽  
...  

This paper presents an investigation of external flow characteristics and pressure fluctuation of a submersible tubular pumping system by using a combination of numerical simulation and experimental methods. The steady numerical simulation is used to predicted the hydraulic performance of the pumping system, and the unsteady calculation is adopted to simulate the pressure fluctuation in different components of a submersible tubular pumping system. A test bench for a model test and pressure pulsation measurement is built to validate the numerical simulation. The results show that the performance curves of the calculation and experiment are in agreement with each other, especially in the high efficiency area, and the deviation is minor under small discharge and large discharge conditions. The pressure pulsation distributions of different flow components, such as the impeller outlet, middle of the guide vane, and guide vane outlet and bulb unit, are basically the same as the measurement data. For the monitoring points on the impeller and the wall of the guide vane especially, the main frequency and its amplitude matching degree are higher, while the pressure pulsation values on the wall of the bulb unit are quite different. The blade passing frequency and its multiples are important parameters for analysis of pressure pulsation; the strongest pressure fluctuation intensity appears in the impeller outlet, which is mainly caused by the rotor–stator interaction. The farther the measuring point from the impeller, the less the pressure pulsation is affected by the blade frequency. The frequency amplitudes decrease from the impeller exit to the bulb unit.


Energies ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 669 ◽  
Author(s):  
Yu Song ◽  
Honggang Fan ◽  
Wei Zhang ◽  
Zhifeng Xie

As an important type of centrifugal pump, the double-suction pump has been widely used due to its high efficiency region and large flow rate. In the present study, the complex flow in volute of a double-suction centrifugal pump is investigated by numerical simulation using a re-normalization group (RNG) k-ε model with experimental validation. Axial flows are observed in volute near the impeller outlet and compared with four staggered angles. The net area-weighted average axial velocities decrease as the staggered angle increases. The axial flows are mainly caused by the different circumferential pressure distribution at the twin impeller outlet. The dominant frequencies of the axial velocities for different staggered angles are fBP and its harmonic. The pressure fluctuations in most regions of the volute are obtained by superimposing the pressure generated by the two impellers.


2013 ◽  
Vol 807-809 ◽  
pp. 392-401 ◽  
Author(s):  
Chong Jian Ma ◽  
Hui Ming ◽  
Hua Shou Li

currently, the comprehensive utilization of red mud has been a worldwide challenge. Due to high alkaline level and a serious lack of nutrients, a great amount of red mud has been stocked in the open rather than covered by plantations, which showed harms to the atmosphere, water and soil environment. In order to explore a more effective phytoremediation approach of red mud and screen plants with strong tolerance, the research group applied Pennisetum hybridum as the experiment material for a long term, which is a new energy plant in the field of ecological environmental management and restoring. Through the addition of different types of addictives, his experiment conducted the plantation Pennisetum hybridum based on red mud improvement matrix. Besides, a systematic research of the improvement effects of different ameliorants on red mud was conducted. Concurrently, the growth of Pennisetum hybridum in different groups of the experiment was investigated. Their mutual effect on the improvement effect of red mud was analyzed systematically. Results demonstrated that effective raw materials of red mud improvement include phosphogypsum, wastes of polluted and edible mushrooms. These can significantly reduce the pH and conductivity of red mud. After the improvement, Pennisetum hybridum can grow vigorously in the mixture matrix of red mud, and significantly improve the red mud matrix. Concurrently, considerable biomasses were obtained. The experiment results demonstrated that the addition of necessary nutriments for the plant growth was very important for red mud. The research has laid a solid foundation for the identification of the great potentials of Pennisetum hybridum in red mud phytoremediation, the further exploration of its role of restoring of red mud and the extensive application and promotion in the future.


2011 ◽  
Vol 383-390 ◽  
pp. 5470-5473
Author(s):  
Yan Shi ◽  
Zong Li Li

New energy vehicles have bright prospect in the near future. In new energy vehicles some parts which are driven by engine through transmission will be replaced by electric drive, such as refrigeration compressor used for air conditioning and air compressor used for air brake system. Because of advantages, such as high efficiency, low friction, compact structure, and so on, linear compressor is suitable to solve above problems. In this paper a novel electric linear compressor is presented. Research work, such as simulation, structure design, control design, has been done. Further experiments are being done by my research team. We believe that electric linear compressor is worthy of being researched to popularize new energy vehicles.


Sign in / Sign up

Export Citation Format

Share Document