scholarly journals Anatomical comparison of branches and trunks of seven commercial wood species

2021 ◽  
Vol 914 (1) ◽  
pp. 012071
Author(s):  
R G H Rahmanto ◽  
R Damayanti ◽  
D A Agustiningrum ◽  
C Oktapiani ◽  
E R Satiti ◽  
...  
Keyword(s):  
Wood Species ◽  
Wood Anatomy ◽  
International Association ◽  
Wood Property ◽  
Physical And Mechanical Properties ◽  
Wood Properties ◽  
Main Stem ◽  
Anatomical Structures ◽  
Comprehensive Information ◽  
Effective Use

Abstract Indonesia is a mega-biodiversity country that grows about 4000 timber producer tree species in tropical rain forest. The comprehensive information of wood properties and quality is important in managing the natural resources sustainably. However, stem in basic properties studies of wood from the natural forest is limited because of some difficulties in harvesting until the transportation process. Hence, study the wood branches becomes a solution, as sometimes wood core samples are not adequate. The question was whether the branch properties could represent the main stem properties? Wood anatomy is an important wood property that can predict the other properties, for instance, the physical and mechanical properties, that determine the effective use of this material. This paper aims to present the comparison of wood anatomical properties of branches and main stem of seven commercial wood species. Quantitative and qualitative anatomical structures were investigated according to the International Association of Wood Anatomist (IAWA) Committee. Result shows that the quantitative wood anatomy of four samples (Mimba, Leda, Jabon, and Bintangur) was statistically different, while only one parameter in Tusam, Mindi, and Khaya was different. Accordingly, it can be concluded that studying the wood properties could be carried out using branch effectively.

Wood Anatomy of Three Lesser Known Species from Mozambique

IAWA Journal ◽  
2009 ◽  
Vol 30 (3) ◽  
pp. 277-291 ◽  
Author(s):  
Ernesto Uetimane Junior ◽  
Nasko Terziev ◽  
Geoffrey Daniel
Keyword(s):  
Wood Species ◽  
Wood Anatomy ◽  
Wood Properties ◽  
Natural Durability ◽  
Ground Tissue ◽  
Anatomical Features ◽  
Ray Parenchyma ◽  
Thin Walled ◽  
Comparative Wood Anatomy ◽  
Diffuse Porous

Three lesser known wood species from Mozambique were studied to generate information for identification purposes and facilitate the introduction of these species into the wood working industry by assigning or widening the potential uses of these species. Selected anatomical features were used to predict some important wood properties, subsequently confirmed by measurements of both density and impregnability. Comparative wood anatomy showed that all three wood species have anatomical features typical for their genus after comparisons with their closest relatives. Both ntholo (Pseudolachnostylis maprounaefolia Pax) and muanga (Pericopsis angolensis Meeuwen) are diffuse-porous (with 14–24 and 16–20 vessels/mm2 respectively), have extractives in the heartwood vessels and thick-walled fibres, features consistent with good natural durability and strength respectively. Metil (Sterculia appendiculata K. Schum.) is also diffuse-porous with very wide vessels at much lower frequency (<5/mm2), it lacks extractives in the heartwood vessels, and thin-walled axial and ray parenchyma constitutes the bulk of the ground tissue. This set of characteristics makes the wood light and satisfactory for construction purposes but highly vulnerable to biodegradation.

FEEDBACK OF WATER STRESS ON WOOD PROPERTIES OF TREES: EXPERIMENTS WITH MISTLETOES ON RHODODENDRON ARBOREUM SM.

1970 ◽  
Vol 11 (1) ◽  
Author(s):  
Mohan P. Devkota ◽  
Gerhard Glatzel
Keyword(s):  
Water Stress ◽  
Wood Anatomy ◽  
Wood Properties ◽  
Vessel Diameter ◽  
Conservation Area ◽  
Rhododendron Arboreum ◽  
Central Nepal ◽  
Inhibition Of Growth ◽  
Infected Area ◽  
Anatomical Parameters

Effects of infection by the mistletoe Scurrula elata (Edgew.) Danser, on wood properties of its common host Rhododendron arboreum Sm., were studied in the Annapurna Conservation Area of Central Nepal Himalaya. Heavy infection by mistletoes invariably causes decline of the host. Infested branches show inhibition of growth, defoliation and eventual death of branch parts distal to the site of infection. Anatomical properties of wood were compared in samples of branches proximal to the infection and in uninfected branches. The hypothesis that infection induces changes in basic wood anatomy could not be proven. Vessel density, vessel area, percentage lumen area and mean vessel diameter of the wood of infested and uninfected branches did not show any significant differences. The studied anatomical parameters were not correlated to the diameter of the host branch. These results show that infection by S. elata did not cause any changes in basic wood anatomy of its host R. arboreum. It appears that the studied anatomical parameters of Rhododendron wood are fairly stable and are not changed by stress due to infection by mistletoes. The damage to the host distal to the infected area most likely results from an insufficiency of total conductive area to supply both mistletoe and host. Unfortunately we could not determine annual conductive area increment, because R arboreum does not develop usable annual tree rings in the climate of the study area. Key words: Himalayas, mistletoe. Rhododendron arboreum, Scurrula elata, water stress, wood anatomy. Ecoprint Vol.11(1) 2004.

Influence of provenance on physical and mechanical properties of Angelim-pedra (Hymenolobium petraeum Ducke.) wood species

2021 ◽  
Author(s):  
Julia Naves Teixeira ◽  
Anderson Renato Vobornik Wolenski ◽  
Vinicius Borges de Moura Aquino ◽  
Tulio Hallak Panzera ◽  
Diogo Aparecido Lopes Silva ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Wood Species ◽  
Physical And Mechanical Properties

Some Tree Growth – Wood Property Relationships of Eucalypts

1975 ◽  
Vol 5 (3) ◽  
pp. 424-432 ◽  
Author(s):  
J. E. Nicholson ◽  
W. E. Hillis ◽  
N. Ditchburne
Keyword(s):  
Wood Property ◽  
Basic Density ◽  
Wood Properties ◽  
Reaction Wood ◽  
Growth Strain ◽  
Fiber Structure ◽  
Tree Crown ◽  
Stem Form ◽  
The Relationship ◽  
Longitudinal Growth Strain

The relationship between level of longitudinal growth strain and stress, modulus of elasticity, basic density, volumetric shrinkage, fiber classification, and stem form was investigated with 10 Eucalyptusregnans regrowth trees. Close relationships were observed. It is suggested that variations in these properties within trees are closely controlled, possibly to enable optimum positioning of the tree crown in relation to its immediate environment. The concept of fiber structure varying as a response to environment is supported by the observed variation in wood properties within and between trees of this species. The often-reported association between eccentric radial growth and reaction wood was not substantiated in this study.The data indicate that if economically justifiable, it would be possible to segregate trees that are likely to contain material that is hard to season.

Anatomical, Chemical and Mechanical Properties of Fast-Growing Populus × Euramericana cv. ‘74/76’

IAWA Journal ◽  
2014 ◽  
Vol 35 (2) ◽  
pp. 158-169 ◽  
Author(s):  
Zhao Rongjun ◽  
Yao Chunli ◽  
Cheng Xianbao ◽  
Lu Jianxiong ◽  
Fei Benhua ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Sandy Loam ◽  
Physical And Mechanical Properties ◽  
Wood Properties ◽  
Planting Density ◽  
Dry Density ◽  
Growth Rings ◽  
Fast Growing ◽  
Breast Height ◽  
Large Growth

The anatomical characteristics, chemical composition, and physical and mechanical properties of fast-growing Populus × euramericana cv. ‘74/76’ juvenile wood were investigated. Four- to five-year-old clonal plantation trees were harvested from two different experimental sites in the suburbs of Beijing. The Shunyi site had black alkali soil with a planting density of 4 × 6 m and the Miyun site had sandy loam soil with a planting density of 3 × 5 m. The test results showed that the poplar trees from the two sites were both fast growing, with poplar at Shunyi growing faster than at Miyun. There were no significant differences in wood properties between trees grown at the two sites. Fiber length at breast height varied from 872 to 1300 μm between growth rings, average fiber width varied from 21.0 to 25.5 μm and double wall thickness varied from 5.0 to 6.6 μm. Average cellulose, lignin and hemicellulose contents in the samples were 48.9%, 25.4%, and 18.8%, respectively. MFA was higher in the first two growth rings (20–25°), and then decreased rapidly to 12° close to the bark. The average air-dry density at breast height was 401 kg/m3 while the average MOE at breast height was 9.3 GPa. The trees showed large growth rates in both height and stem diameter during the growing season. However, wood properties of the juvenile poplar appeared to be similar to those of poplars with a slower growth rate.

scholarly journals LAMINAR INCLUSION IN SUGARCANE BAGASSE PARTICLEBOARD

CERNE ◽  
2017 ◽  
Vol 23 (2) ◽  
pp. 153-160
Author(s):  
Stefania Lima Oliveira ◽  
Ticyane Pereira Freire ◽  
Tamires Galvão Tavares Pereira ◽  
Lourival Marin Mendes ◽  
Rafael Farinassi Mendes
Keyword(s):  
Mechanical Properties ◽  
Physical Properties ◽  
Sugarcane Bagasse ◽  
Wood Species ◽  
Sugar Cane ◽  
Physical And Mechanical Properties ◽  
Pressure Level ◽  
Sugar Cane Bagasse

ABSTRACT The objective of this study is to assess the effect of the laminar inclusion on the physical and mechanical properties of sugarcane bagasse particleboard. We used the commercial panels of sugarcane bagasse produced in China. To evaluate the effect of the laminar inclusion was tested two wood species (Pinus and Eucalyptus) and two pressures (10 and 15 kgf.cm-2) along with a control (without laminar inclusion). The panels with laminar inclusion obtained improvements in the physical properties, with a significant reduction in the WA2h, WA24h and TS2h. There was a significant increase in the properties MOE and MOR parallel and Janka hardness, while the properties MOE and MOR perpendicular decreased significantly. The pinus and eucalyptus veneers inclusion resulted in similar results when added to the panel with a 10 kgf.cm-2 pressure. The use of 15 kgf.cm-2 pressure is not indicated for the pinus veneer inclusion in sugar cane bagasse panels. There was no effect of the pressure level when evaluating the eucalyptus veneer inclusion on the properties of the sugarcane bagasse panels.

Reference Guide for Integrating Continuous Glucose Monitoring Into Clinical Practice

2018 ◽  
Vol 45 (1_suppl) ◽  
pp. 3S-20S ◽  
Author(s):  
Davida F. Kruger ◽  
Steve V. Edelman ◽  
Deborah A. Hinnen ◽  
Christopher G. Parkin
Keyword(s):  
Clinical Practice ◽  
Continuous Glucose Monitoring ◽  
Glucose Monitoring ◽  
Health Care Team ◽  
Basic Knowledge ◽  
Reference Guide ◽  
Comprehensive Information ◽  
Effective Use

Purpose Large randomized trials have demonstrated the efficacy of continuous glucose monitoring (CGM) in persons with type 1 diabetes and insulin-treated type 2 diabetes. The purpose of this article is to provide basic knowledge about CGM technology, discuss the use of CGM data in clinical practice, and direct clinicians to online resources that provide comprehensive information and tools relevant to patient selection, education/training, and reimbursement. Conclusions Effective use of CGM requires all members of the health care team to become knowledgeable and skilled in integrating CGM into their practices and in teaching their patients how to safely incorporate CGM use into their daily diabetes self-management.

Cognitive spectroscopy for wood species identification: near infrared hyperspectral imaging combined with convolutional neural networks

The Analyst ◽  
2019 ◽  
Vol 144 (21) ◽  
pp. 6438-6446
Author(s):  
Hideaki Kanayama ◽  
Te Ma ◽  
Satoru Tsuchikawa ◽  
Tetsuya Inagaki
Keyword(s):  
Neural Networks ◽  
Species Identification ◽  
Hyperspectral Imaging ◽  
Convolutional Neural Networks ◽  
Wood Species ◽  
Near Infrared ◽  
Wood Properties ◽  
Identification System ◽  
Illegal Logging ◽  
System P

From the viewpoint of combating illegal logging and examining wood properties, there is a contemporary demand for a wood species identification system.

Sign in / Sign up

Export Citation Format

Share Document