scholarly journals Gasoline Engine Performance, Emissions, Vibration And Noise With Methanol-Gasoline Fuel Blends

2021 ◽  
Vol 927 (1) ◽  
pp. 012027
Author(s):  
Tri Susilo Wirawan ◽  
Andi Erwin Eka Putra ◽  
Nasruddin Aziz
Keyword(s):  
Fuel Consumption ◽  
Fossil Fuels ◽  
Gasoline Engine ◽  
Engine Performance ◽  
Fuel Mixture ◽  
Alternative Fuel ◽  
Specific Fuel Consumption ◽  
Engine Noise ◽  
Engine Vibration ◽  
Methanol Mixture

Abstract The consumption of fossil fuels raises major issues, such as energy availability and environmental preservation. In order to minimize these issues, it is important to propose alternative fuel. Alternative fuel to be proposed should be easy to apply current type of enginethat do not require engine modification and environmentally friendly. This study aims to determine the effect of addition of methanol as a non-fossil fuel mixture into RON 88 gasoline. The ratio of mixture is 80% of RON 88 gasoline and 20% of methanol. We conducted the experiment to determine the mixture effect on fuel properties, engine performance, engine vibration, engine noise, and exhaust emissions. The engine simulation utilized the TV-1 engine (Kirloskar Oil Engines Ltd.). The results show that the engine performance of fuel mixed with methanol tends to be better even though the fuel consumption is higher, the highest specific fuel consumption in the methanol mixture is 2.9 kg/kwh while the specific fuel consumption for gasoline without a methanol mixture is 2.64 kg/kwh. The largest engine vibration occurred in the measurement of the vertical radial direction of 36 m/s2 and 34 m/s2 for with methanol and without the addition of methanol, at 1200 rpm to 1600 rpm respectively. Engine noise is higher for fuel mixed with methanol with the largest value of 86.4 dB compared to 85.7 dB for pure gasoline. Lower emission levels for fuel blended with methanol, where the highest HC emission for pure gasoline is 32 ppm while fuel mixed with methanol is 17 ppm.

scholarly journals Control of Exhaust Emissions Using Piston Coating on Two-StrokeSI Engines with Gasoline Blends

2021 ◽  
Vol 8 (1) ◽  
pp. H16-H20
Author(s):  
A.V.N.S. Kiran ◽  
B. Ramanjaneyulu ◽  
M. Lokanath M. ◽  
S. Nagendra ◽  
G.E. Balachander
Keyword(s):  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Specific Fuel Consumption ◽  
Thermal Barrier ◽  
Piston Crown ◽  
Barrier Coating

An increase in fuel utilization to internal combustion engines, variation in gasoline price, reduction of the fossil fuels and natural resources, needs less carbon content in fuel to find an alternative fuel. This paper presents a comparative study of various gasoline blends in a single-cylinder two-stroke SI engine. The present experimental investigation with gasoline blends of butanol and propanol and magnesium partially stabilized zirconium (Mg-PSZ) as thermal barrier coating on piston crown of 100 µm. The samples of gasoline blends were blended with petrol in 1:4 ratios: 20 % of butanol and 80 % of gasoline; 20 % of propanol and 80 % of gasoline. In this work, the following engine characteristics of brake thermal efficiency (BTH), specific fuel consumption (SFC), HC, and CO emissions were measured for both coated and non-coated pistons. Experiments have shown that the thermal efficiency is increased by 2.2 % at P20. The specific fuel consumption is minimized by 2.2 % at P20. Exhaust emissions are minimized by 2.0 % of HC and 2.4 % of CO at B20. The results strongly indicate that the combination of thermal barrier coatings and gasoline blends can improve engine performance and reduce exhaust emissions.

scholarly journals Rancang Bangun dan Pengujian Penghalang Heliks sebagai Pencampur Udara-Biogas pada Motor Otto

2021 ◽  
Vol 8 (3) ◽  
pp. 89-96
Author(s):  
Herbert Hasudungan Siahaan ◽  
Armansyah H Tambunan ◽  
Desrial ◽  
Soni Solistia Wirawan
Keyword(s):  
Fuel Consumption ◽  
Performance Test ◽  
Engine Performance ◽  
Fuel Mixture ◽  
Specific Fuel Consumption ◽  
Combustion Reaction ◽  
Otto Cycle ◽  
Direct Use ◽  
Engine Power

A helical barrier as air-biogas mixing device was designed and tested for direct use of biogas from digester in otto cycle generator set. Homogeneity of the air-fuel mixture can give better combustion reaction and increase engine power. The design was based on simulation, which shows that a 0.039 m length of helical barrier gave a 5% increase in power compared to non-helical barrier. Likewise, the simulations also showed that the helical barrier reduced specific fuel consumption (SFC) by 8%. Accordingly, the mixer with helical barrier was designed, and fabricated. Its performance test confirms the improvement resulted by using helical barriers as air-biogas mixer in the engine. The experiment showed that the power increased by 5% when using helical barrier, while SFC decreased by 4.5%. It is concluded that the helical barrier can increase the homogeneity of the mixture resulting in better engine performance. Besides, emissions produced from the engine using a helical barrier also decreased.

scholarly journals Investigation of the Gasoline Engine Performance and Emissions Working on Methanol-Gasoline Blends Using Engine Simulation

2020 ◽  
Author(s):  
Simeon Iliev
Keyword(s):  
Fuel Consumption ◽  
Gasoline Engine ◽  
Engine Performance ◽  
Specific Fuel Consumption ◽  
Injection System ◽  
Si Engine ◽  
Engine Simulation ◽  
Fuel Blends ◽  
Performance And Emissions ◽  
The One

The aim of this study is to develop the one-dimensional model of a four-cylinder, four-stroke, multi-point injection system SI engine and a direct injection system SI engine for predicting the effect of various fuel types on engine performances, specific fuel consumption, and emissions. Commercial software AVL BOOST was used to examine the engine characteristics for different blends of methanol and gasoline (by volume: 5% methanol [M5], 10% methanol [M10], 20% methanol [M20], 30% methanol [M30], and 50% methanol [M50]). The methanol-gasoline fuel blend results were compared to those of net gasoline fuel. The obtained results show that when methanol-gasoline fuel blends were used, engine performance such as power and torque increases and the brake-specific fuel consumption increases with increasing methanol percentage in the blended fuel.

Performance Analysis of Rice Bran Oil [Non-Edible] as Alternative Fuel for D I Engines

2011 ◽  
Author(s):  
Prasad Baburao Rampure ◽  
C. Venkataramana Reddy
Keyword(s):  
Performance Analysis ◽  
Fuel Consumption ◽  
Rice Bran ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Rice Bran Oil ◽  
Alternative Fuel ◽  
Specific Fuel Consumption ◽  
Injection Timing ◽  
Opening Pressure

The economic growth of any country is determined by the natural resources it possesses and the fuel that it has. The rate of growth of any country is mostly directly proportional to the amount of fuel it possesses. Fossil fuels are important resources those have helped in the rapid industrialization of the world and thus to the increase in the quality of life. However, due to the threat of supply instabilities and the effect of green house gases caused by internal combustion engines have received more and more interests in the use of alternative fuel. The study deals with the experimental investigation and the performance analysis of rice bran oil (non edible) a straight vegetable oil (SVO] and its blends with diesel for different injector opening pressure by using DI diesel engines. Most of the published work using rice bran oil in diesel engine was carried out without changing injector opening pressure and static injection timing. The observations of the investigation are of the following performance parameters: 1. Specific Fuel Consumption - Diesel vs rice bran oil. 2. Optimum Air Fuel ratios. 3. Study of exhaust gases in line with the specifications of Indian pollution norms. 4.Techno-Commercial considerations in the modification of engine if required. Experiments were conducted by blending diesel with rice bran oil in various proportions and with varying loads. Studies have found that the use of blends of more viscous rice bran oil and Diesel in various percentages result in the decrease of the Specific fuel consumption (SFC) while the use of 100% rice bran oil results in the marginally higher Specific fuel consumption than Diesel. Further studies are on for other parameters.

Gasoline and Synthetic Fuel from Plastic Waste

2016 ◽  
Vol 6 (2) ◽  
pp. 41-50
Author(s):  
Apip Amrullah
Keyword(s):  
Gasoline Engine ◽  
Engine Performance ◽  
Fuel Mixture ◽  
Alternative Fuel ◽  
Exhaust Emissions ◽  
Motor Vehicles ◽  
Synthetic Fuel ◽  
Motor Gasoline ◽  
Petroleum Fuels ◽  
Analysis Of Performance

Currently the use of motor gasoline from year to year increase. In 2010 the number of vehicles in Indonesia about 26,706,705 vehicles, in 2011 amounted to 30,769,093 vehicles and 2012 amounted to 38,156,278 vehicles. This resulted in the consumption of petroleum fuels and exhaust emissions in motor vehicles is increasing. To overcome these problems, conducted research on synthetic fuel which is one of the alternative fuel sources. This research was conducted at gasoline engine. Variations in fuel mixture gasoline and synthetic fuel. This research will be able to generate and determine the effect of fuel mixture gasoline-synthetic fuel on levels of exhaust emissions, to determine the effect of fuel mixture gasoline-synthetic fuel for engine performance. Based on the analysis of performance and exhaust emissions test on a gasoline engine, for most engine performance is good and efficient set at first to mix synthetic fuel.

scholarly journals Air and fuel supercharge in the performance of a diesel cycle engine

2017 ◽  
Vol 47 (6) ◽  
Author(s):  
Marcelo Silveira de Farias ◽  
José Fernando Schlosser ◽  
Alfran Tellechea Martini ◽  
Gustavo Oliveira dos Santos ◽  
Javier Solis Estrada
Keyword(s):  
Fuel Consumption ◽  
Engine Performance ◽  
Fuel Mixture ◽  
Supply System ◽  
Specific Fuel Consumption ◽  
Diesel Cycle ◽  
System Variables ◽  
Agricultural Tractor ◽  
Original Configuration ◽  
Engine Power

ABSTRACT: This paper aimed to evaluate the performance of a Diesel cycle engine, changing the configurations for the air and fuel supply system. Variables analyzed were torque, power, specific fuel consumption and thermal efficiency in four different engine configurations (aspirated, aspirated + service, turbocharged + service and turbocharged). For that, there were dynamometer experiments by power take-off of an agricultural tractor. The experimental outline used was entirely randomized, in a bifatorial design with three repetitions. Results indicated that the engine supercharge, compared to its original configuration, provided a significant increase of torque and power. Only the addition of turbo does not caused a significant effect in the engine performance. Application of turbocharger provides an improvement in the burning of the air/fuel mixture, which favors the increase of engine power and; consequently, reduced the specific fuel consumption.

scholarly journals A Comparison of Ethanol, Methanol, and Butanol Blending with Gasoline and Its Effect on Engine Performance and Emissions Using Engine Simulation

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1322
Author(s):  
Simeon Iliev
Keyword(s):  
Alternative Fuels ◽  
Fossil Fuels ◽  
Gasoline Engine ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Engine Simulation ◽  
Engine Model ◽  
Fuel Blends ◽  
Performance And Emissions ◽  
Blended Fuels

Air pollution, especially in large cities around the world, is associated with serious problems both with people’s health and the environment. Over the past few years, there has been a particularly intensive demand for alternatives to fossil fuels, because when they are burned, substances that pollute the environment are released. In addition to the smoke from fuels burned for heating and harmful emissions that industrial installations release, the exhaust emissions of vehicles create a large share of the fossil fuel pollution. Alternative fuels, known as non-conventional and advanced fuels, are derived from resources other than fossil fuels. Because alcoholic fuels have several physical and propellant properties similar to those of gasoline, they can be considered as one of the alternative fuels. Alcoholic fuels or alcohol-blended fuels may be used in gasoline engines to reduce exhaust emissions. This study aimed to develop a gasoline engine model to predict the influence of different types of alcohol-blended fuels on performance and emissions. For the purpose of this study, the AVL Boost software was used to analyse characteristics of the gasoline engine when operating with different mixtures of ethanol, methanol, butanol, and gasoline (by volume). Results obtained from different fuel blends showed that when alcohol blends were used, brake power decreased and the brake specific fuel consumption increased compared to when using gasoline, and CO and HC concentrations decreased as the fuel blends percentage increased.

Two-Stroke Marine Diesel Engine Variable Injection Timing System Performance Evaluation and Optimum Setting for Minimum Fuel Consumption at Acceptable NOx Levels

2014 ◽  
Author(s):  
Dimitrios T. Hountalas ◽  
Spiridon Raptotasios ◽  
Antonis Antonopoulos ◽  
Stavros Daniolos ◽  
Iosif Dolaptzis ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Engine Performance ◽  
Operating Conditions ◽  
Specific Fuel Consumption ◽  
Injection Timing ◽  
Nox Emissions ◽  
Pressure Measurements ◽  
Cylinder Pressure ◽  
Start Of Injection

Currently the most promising solution for marine propulsion is the two-stroke low-speed diesel engine. Start of Injection (SOI) is of significant importance for these engines due to its effect on firing pressure and specific fuel consumption. Therefore these engines are usually equipped with Variable Injection Timing (VIT) systems for variation of SOI with load. Proper operation of these systems is essential for both safe engine operation and performance since they are also used to control peak firing pressure. However, it is rather difficult to evaluate the operation of VIT system and determine the required rack settings for a specific SOI angle without using experimental techniques, which are extremely expensive and time consuming. For this reason in the present work it is examined the use of on-board monitoring and diagnosis techniques to overcome this difficulty. The application is conducted on a commercial vessel equipped with a two-stroke engine from which cylinder pressure measurements were acquired. From the processing of measurements acquired at various operating conditions it is determined the relation between VIT rack position and start of injection angle. This is used to evaluate the VIT system condition and determine the required settings to achieve the desired SOI angle. After VIT system tuning, new measurements were acquired from the processing of which results were derived for various operating parameters, i.e. brake power, specific fuel consumption, heat release rate, start of combustion etc. From the comparative evaluation of results before and after VIT adjustment it is revealed an improvement of specific fuel consumption while firing pressure remains within limits. It is thus revealed that the proposed method has the potential to overcome the disadvantages of purely experimental trial and error methods and that its use can result to fuel saving with minimum effort and time. To evaluate the corresponding effect on NOx emissions, as required by Marpol Annex-VI regulation a theoretical investigation is conducted using a multi-zone combustion model. Shop-test and NOx-file data are used to evaluate its ability to predict engine performance and NOx emissions before conducting the investigation. Moreover, the results derived from the on-board cylinder pressure measurements, after VIT system tuning, are used to evaluate the model’s ability to predict the effect of SOI variation on engine performance. Then the simulation model is applied to estimate the impact of SOI advance on NOx emissions. As revealed NOx emissions remain within limits despite the SOI variation (increase).

Sign in / Sign up

Export Citation Format

Share Document