scholarly journals Rancang Bangun dan Pengujian Penghalang Heliks sebagai Pencampur Udara-Biogas pada Motor Otto

2021 ◽  
Vol 8 (3) ◽  
pp. 89-96
Author(s):  
Herbert Hasudungan Siahaan ◽  
Armansyah H Tambunan ◽  
Desrial ◽  
Soni Solistia Wirawan
Keyword(s):  
Fuel Consumption ◽  
Performance Test ◽  
Engine Performance ◽  
Fuel Mixture ◽  
Specific Fuel Consumption ◽  
Combustion Reaction ◽  
Otto Cycle ◽  
Direct Use ◽  
Engine Power

A helical barrier as air-biogas mixing device was designed and tested for direct use of biogas from digester in otto cycle generator set. Homogeneity of the air-fuel mixture can give better combustion reaction and increase engine power. The design was based on simulation, which shows that a 0.039 m length of helical barrier gave a 5% increase in power compared to non-helical barrier. Likewise, the simulations also showed that the helical barrier reduced specific fuel consumption (SFC) by 8%. Accordingly, the mixer with helical barrier was designed, and fabricated. Its performance test confirms the improvement resulted by using helical barriers as air-biogas mixer in the engine. The experiment showed that the power increased by 5% when using helical barrier, while SFC decreased by 4.5%. It is concluded that the helical barrier can increase the homogeneity of the mixture resulting in better engine performance. Besides, emissions produced from the engine using a helical barrier also decreased.

scholarly journals Air and fuel supercharge in the performance of a diesel cycle engine

2017 ◽  
Vol 47 (6) ◽  
Author(s):  
Marcelo Silveira de Farias ◽  
José Fernando Schlosser ◽  
Alfran Tellechea Martini ◽  
Gustavo Oliveira dos Santos ◽  
Javier Solis Estrada
Keyword(s):  
Fuel Consumption ◽  
Engine Performance ◽  
Fuel Mixture ◽  
Supply System ◽  
Specific Fuel Consumption ◽  
Diesel Cycle ◽  
System Variables ◽  
Agricultural Tractor ◽  
Original Configuration ◽  
Engine Power

ABSTRACT: This paper aimed to evaluate the performance of a Diesel cycle engine, changing the configurations for the air and fuel supply system. Variables analyzed were torque, power, specific fuel consumption and thermal efficiency in four different engine configurations (aspirated, aspirated + service, turbocharged + service and turbocharged). For that, there were dynamometer experiments by power take-off of an agricultural tractor. The experimental outline used was entirely randomized, in a bifatorial design with three repetitions. Results indicated that the engine supercharge, compared to its original configuration, provided a significant increase of torque and power. Only the addition of turbo does not caused a significant effect in the engine performance. Application of turbocharger provides an improvement in the burning of the air/fuel mixture, which favors the increase of engine power and; consequently, reduced the specific fuel consumption.

scholarly journals Study on Emission and Performance of Diesel Engine Using Castor Biodiesel

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Md. Saiful Islam ◽  
Abu Saleh Ahmed ◽  
Aminul Islam ◽  
Sidek Abdul Aziz ◽  
Low Chyi Xian ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Performance Test ◽  
Engine Performance ◽  
Specific Fuel Consumption ◽  
Smoke Emission ◽  
Suitable Alternative ◽  
Biodiesel Blend ◽  
And Performance ◽  
Emission And Performance

This paper presents the result of investigations carried out in studying the emission and performance of diesel engine using the castor biodiesel and its blend with diesel from 0% to 40% by volume. The acid-based catalyzed transesterification system was used to produce castor biodiesel and the highest yield of 82.5% was obtained under the optimized condition. The FTIR spectrum of castor biodiesel indicates the presence of C=O and C–O functional groups, which is due to the ester compound in biodiesel. The smoke emission test revealed that B40 (biodiesel blend with 40% biodiesel and 60% diesel) had the least black smoke compared to the conventional diesel. Diesel engine performance test indicated that the specific fuel consumption of biodiesel blend was increased sufficiently when the blending ratio was optimized. Thus, the reduction in exhaust emissions and reduction in brake-specific fuel consumption made the blends of caster seed oil (B20) a suitable alternative fuel for diesel and could help in controlling air pollution.

Comparative Study of Properties and Engine Performance Using Blend of Palm and Coconut Biodiesel

2014 ◽  
Vol 663 ◽  
pp. 13-18 ◽  
Author(s):  
M. Habibullah ◽  
H.H. Masjuki ◽  
M.A. Kalam ◽  
A.M. Ashraful ◽  
K.A.H. Al Mahmud ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Diesel Fuel ◽  
Performance Test ◽  
Fossil Fuel ◽  
Greenhouse Gas Emission ◽  
Load Condition ◽  
Engine Performance ◽  
Flash Point ◽  
Specific Fuel Consumption ◽  
Biodiesel Blends

Now-a-days the demand of alternative fuel is continuously increasing all over the world due to the rapid depletion of fossil fuel and increased global demand. Biodiesel is renewable and sustainable energy source derived from vegetable oils and animal fats which can be the best substitute of fossil fuel. This paper investigates the property of different biodiesel such as palm, coconut and their blends with conventional diesel also analyzed the engine performance like engine break power, speed, break specific fuel consumption (BSFC), torque in diesel engine. In this paper 20% palm biodiesel with diesel (P20), 20% coconut biodiesel with diesel (C20), 30% palm biodiesel with diesel (P30), 30% coconut biodiesel with diesel (C30) and combination of 15% palm biodiesel and 15% of coconut biodiesel with diesel (C15P15) were used for study. Biodiesel was produced by using transesterification process. The density and kinematic viscosity for C15P15 fuel is slightly higher and flash point is slightly lower than diesel fuel as well as others two biodiesel blends whereas pure palm oil biodiesel shows the higher flash point and acid value. Engine performance test was carried out at 75 kg load condition with variable speeds of 1400 rpm to 2000 rpm at an interval of 200 rpm. Engine brake power produced by mixed biodiesel (C15P15) is slightly lower than the fossil diesel but slightly higher than biodiesel (only palm or coconut). Engine torque produce by the mixed biodiesel is almost the same with the fossil diesel but higher than the others biodiesel blends. Engine brake specific fuel consumption of mixed biodiesel is slightly higher than fossil diesel but lower than others existing biodiesel. It can be reported that the fuel C15P15 showed better performance and can be used as fuel alternative to diesel fuel to reduce the greenhouse gas emission and dependency on crude oil.

scholarly journals Gasoline Engine Performance, Emissions, Vibration And Noise With Methanol-Gasoline Fuel Blends

2021 ◽  
Vol 927 (1) ◽  
pp. 012027
Author(s):  
Tri Susilo Wirawan ◽  
Andi Erwin Eka Putra ◽  
Nasruddin Aziz
Keyword(s):  
Fuel Consumption ◽  
Fossil Fuels ◽  
Gasoline Engine ◽  
Engine Performance ◽  
Fuel Mixture ◽  
Alternative Fuel ◽  
Specific Fuel Consumption ◽  
Engine Noise ◽  
Engine Vibration ◽  
Methanol Mixture

Abstract The consumption of fossil fuels raises major issues, such as energy availability and environmental preservation. In order to minimize these issues, it is important to propose alternative fuel. Alternative fuel to be proposed should be easy to apply current type of enginethat do not require engine modification and environmentally friendly. This study aims to determine the effect of addition of methanol as a non-fossil fuel mixture into RON 88 gasoline. The ratio of mixture is 80% of RON 88 gasoline and 20% of methanol. We conducted the experiment to determine the mixture effect on fuel properties, engine performance, engine vibration, engine noise, and exhaust emissions. The engine simulation utilized the TV-1 engine (Kirloskar Oil Engines Ltd.). The results show that the engine performance of fuel mixed with methanol tends to be better even though the fuel consumption is higher, the highest specific fuel consumption in the methanol mixture is 2.9 kg/kwh while the specific fuel consumption for gasoline without a methanol mixture is 2.64 kg/kwh. The largest engine vibration occurred in the measurement of the vertical radial direction of 36 m/s2 and 34 m/s2 for with methanol and without the addition of methanol, at 1200 rpm to 1600 rpm respectively. Engine noise is higher for fuel mixed with methanol with the largest value of 86.4 dB compared to 85.7 dB for pure gasoline. Lower emission levels for fuel blended with methanol, where the highest HC emission for pure gasoline is 32 ppm while fuel mixed with methanol is 17 ppm.

ANALISIS UNJUK KERJA MESIN DIESEL DENGAN BAHAN BAKAR CAMPURAN PERTADEX DAN BIODIESEL DARI BIJI KEMIRI

ROTOR ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 10
Author(s):  
Moh. Wafir ◽  
Digdo Listyadi ◽  
Rahma Rei Sakura
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Alternative Fuels ◽  
Performance Test ◽  
Engine Performance ◽  
Specific Fuel Consumption ◽  
Exhaust Gas ◽  
Engine Exhaust ◽  
Biodiesel Blends ◽  
Aleurites Moluccana

The decline in fuel oil production has led to the development of alternative fuels that are renewable and more environmentally friendly. An alternative fuel that can be developed is biodiesel. In this study aims to develop alternative biodiesel fuels as a substitute for fossil oil fuels that are feasible applied to diesel engines. This study conducted a diesel engine performance test using mixed fuel from pertadex and biodiesel Aleurites Moluccana with a variation of biodiesel mixture B10, B20, and B30. From the test results using a mixture of biodiesel, the ef ective power and torque produced by the engine decreases compared to using pure pertadex. Among the three variations of the biodiesel mixture, the best ef ective power produced by B10 fuel is 277 Watt and the best torque produced by B10 fuel is 1,238 Nm. Specific fuel consumption in all biodiesel blends is increased compared to pure pertadex. Among the three variations of the biodiesel mixture, the best specific fuel consumption produced by B30 fuel is 1197,67 g/kWh. The thermal ef iciency in all biodiesel blends is increased compared to pure pertadex in B20 and B30 blends. Among the three variations of the biodiesel mixture, the best thermal ef iciency produced by B20 fuel is 7,883 %. The opacity of the engine exhaust gas produced in all biodiesel mixes is getting better compared to using pure pertadex. The best opacity of the engine exhaust gas produced in the use of B30 fuel is 2,3% HSU. Keywords: Biodiesel, Aleurites Moluccana, Diesel Engine Performance, Opacity

The Development of the RB211-24C Industrial Gas Generator to Operate on Medium Btu Gas

1984 ◽  
Author(s):  
Jeffrey D. Willis
Keyword(s):  
Fuel Consumption ◽  
Engine Performance ◽  
Specific Fuel Consumption ◽  
Gas Generator ◽  
Process Gas ◽  
Full Power ◽  
Bearing Loads ◽  
Gas Conditioning ◽  
Engine Power

This paper describes a programme of work carried out to demonstrate that the RB211-24C aero derivative gas generator is able to operate satisfactorily on medium Btu gas typical of that produced from a process gas conditioning system. Rig tests were carried out to identify a combustor design capable of operating throughout the entire engine power range, i.e. ignition to full power. Finally engine tests to determine combustor and engine performance including handling and bearing loads were performed on a simulated medium Btu gas using a variable propane/nitrogen system. The results obtained demonstrate that the RB211-24C is capable of operating on a variety of gases with widely different calorific values. Also, when operating on medium Btu gas a significant improvement in specific fuel consumption and an increase in power are achieveable.

New Design of a Low Cost Small Engine Dynamometer for Engine Testing

2014 ◽  
Vol 699 ◽  
pp. 642-647 ◽  
Author(s):  
M.A. Ammar Alfaiz ◽  
M. Tahir Musthafah ◽  
Abu Bakar Rosli ◽  
M. Shahir Ali ◽  
Abdul Muhaimin
Keyword(s):  
Fuel Consumption ◽  
Low Cost ◽  
Pressure Gauge ◽  
Engine Performance ◽  
Control Valve ◽  
Angular Speed ◽  
Specific Fuel Consumption ◽  
Engine Torque ◽  
Engine Testing ◽  
Engine Power

This paper discusses the design and development of a low cost small engine dynamometer for engine testing to measure engine performance i.e. power, torque and specific fuel consumption. The data and result were achieved by using a small hydraulic engine dynamometer with specific considerations and standard followed in order to have good engine dynamometer. Small engine was used by coupling it with the hydraulic pump that come with the control valve and pressure gauge. Control valve was set to build back pressure inside the pumping area. When the engine starts, the pressure gauge will give a reading which can be used to calculate the engine torque. By using the engine torque, engine power can be obtained by multiplying the angular speed with engine torque. Specific fuel consumption can be defined, by dividing the brake engine power with the fuel rate. From the experiment data, the brake power of the single cylinder engine showed that it is almost similar to the specification given by the manufacturer. The low cost hydraulic engine dynamometer, which is less than RM 15,000 can be used to measure an engine performance. The engine power, torque, engine speed and air fuel ratio data can be achieved from our developed engine dynamometer.

The Performance of a Common Rail Diesel Engine Fueled with Different Blending Ratio of Biodiesels at Different Altitudes

2013 ◽  
Vol 860-863 ◽  
pp. 1685-1689
Author(s):  
Ze Fei Tan ◽  
Li Zhong Shen ◽  
De Cai Jin ◽  
Yang Wen Bin Ou
Keyword(s):  
High Pressure ◽  
Diesel Engine ◽  
Fuel Consumption ◽  
Engine Performance ◽  
Common Rail ◽  
Specific Fuel Consumption ◽  
Brake Specific Fuel Consumption ◽  
Gas Temperature ◽  
Engine Power ◽  
High Pressure Common Rail

To study the effect of the biodiesel on the performance of the high pressure common rail diesel engine performance, a experiment is conducted about the high pressure common rail diesel engine uses diesel fuel and different blending ratio of biodiesels. The results show that with the rising of the altitude, the engine power and the brake specific fuel consumption reduce, exhaust gas temperature increases; At the same altitude, the engine fueled with different blending ratio of bio-diesel has higher brake specific fuel consumption in comparison with fueled engine, but it has lower power, with the increase in bio-diesel blending ratio, engine power, fuel consumption increase.

Two-Stroke Marine Diesel Engine Variable Injection Timing System Performance Evaluation and Optimum Setting for Minimum Fuel Consumption at Acceptable NOx Levels

2014 ◽  
Author(s):  
Dimitrios T. Hountalas ◽  
Spiridon Raptotasios ◽  
Antonis Antonopoulos ◽  
Stavros Daniolos ◽  
Iosif Dolaptzis ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Engine Performance ◽  
Operating Conditions ◽  
Specific Fuel Consumption ◽  
Injection Timing ◽  
Nox Emissions ◽  
Pressure Measurements ◽  
Cylinder Pressure ◽  
Start Of Injection

Currently the most promising solution for marine propulsion is the two-stroke low-speed diesel engine. Start of Injection (SOI) is of significant importance for these engines due to its effect on firing pressure and specific fuel consumption. Therefore these engines are usually equipped with Variable Injection Timing (VIT) systems for variation of SOI with load. Proper operation of these systems is essential for both safe engine operation and performance since they are also used to control peak firing pressure. However, it is rather difficult to evaluate the operation of VIT system and determine the required rack settings for a specific SOI angle without using experimental techniques, which are extremely expensive and time consuming. For this reason in the present work it is examined the use of on-board monitoring and diagnosis techniques to overcome this difficulty. The application is conducted on a commercial vessel equipped with a two-stroke engine from which cylinder pressure measurements were acquired. From the processing of measurements acquired at various operating conditions it is determined the relation between VIT rack position and start of injection angle. This is used to evaluate the VIT system condition and determine the required settings to achieve the desired SOI angle. After VIT system tuning, new measurements were acquired from the processing of which results were derived for various operating parameters, i.e. brake power, specific fuel consumption, heat release rate, start of combustion etc. From the comparative evaluation of results before and after VIT adjustment it is revealed an improvement of specific fuel consumption while firing pressure remains within limits. It is thus revealed that the proposed method has the potential to overcome the disadvantages of purely experimental trial and error methods and that its use can result to fuel saving with minimum effort and time. To evaluate the corresponding effect on NOx emissions, as required by Marpol Annex-VI regulation a theoretical investigation is conducted using a multi-zone combustion model. Shop-test and NOx-file data are used to evaluate its ability to predict engine performance and NOx emissions before conducting the investigation. Moreover, the results derived from the on-board cylinder pressure measurements, after VIT system tuning, are used to evaluate the model’s ability to predict the effect of SOI variation on engine performance. Then the simulation model is applied to estimate the impact of SOI advance on NOx emissions. As revealed NOx emissions remain within limits despite the SOI variation (increase).

Characteristics of Water-in-Diesel Emulsions in a Single Cylinder Compression Ignition Engine

2014 ◽  
Author(s):  
Teja Gonguntla ◽  
Robert Raine ◽  
Leigh Ramsey ◽  
Thomas Houlihan
Keyword(s):  
Fuel Consumption ◽  
Direct Injection ◽  
Engine Performance ◽  
Operating Conditions ◽  
Specific Fuel Consumption ◽  
Brake Specific Fuel Consumption ◽  
Compression Ignition Engine ◽  
Oil Emulsion ◽  
Single Cylinder ◽  
Performance And Emission

The objective of this project was to develop both engine performance and emission profiles for two test fuels — a 6% water-in-diesel oil emulsion (DOE-6) fuel and a neat diesel (D100) fuel. The testing was performed on a single cylinder, direct-injection, water-cooled diesel engine coupled to an eddy current dynamometer. Output parameters of the engine were used to calculate Brake Specific Fuel Consumption (BSFC) and Engine Efficiency (η) for each test fuel. DOE-6 fuels generated a 24% reduction in NOX and a 42% reduction in Carbon Monoxide emissions over the tested operating conditions. DOE-6 fuels presented higher ignition delays — between 1°-4°, yielded 1%–12% lower peak cylinder pressures and produced up to 5.5% lower exhaust temperatures. Brake Specific Fuel consumption increased by 6.6% for the DOE-6 fuels as compared to the D100 fuels. This project is the first research done by a New Zealand academic institution on water-in-diesel emulsion fuels.

Sign in / Sign up

Export Citation Format

Share Document