scholarly journals Experimental and Numerical Investigations into Temperature Distributions and VOC Conversion Rate of RTO

2021 ◽  
Vol 943 (1) ◽  
pp. 012014
Author(s):  
Jingyin Liu ◽  
Zhijun Peng
Keyword(s):  
Heat Transfer ◽  
Combustion Temperature ◽  
Critical Role ◽  
Internal Flow ◽  
Treatment Efficiency ◽  
Temperature Distributions ◽  
Bed Temperature ◽  
Volatile Organic ◽  
Reaction Processes ◽  
And Storage

Abstract As regulations for controlling VOCs (Volatile Organic Compounds) emissions have become more and more stringent, RTO (Regenerative Thermal Oxidizer) which involves heat exchange and storage, combustion and reaction processes has to be further optimised for enhancing the VOC treatment efficiency and reducing energy consumption. In this paper, influences of operating temperature distributions and internal flow fields on gas-out VOC concentration have been studied with experimental investigation and CFD numerical simulation. Experimental results shows that combustion temperature (around the combustor) plays more critical role than thermal storage bed temperature for affecting VOC flow-out concentration. By examining the internal flow and temperature distributions, modelling results demonstrate that fast heat transfer takes place in thermal ceramic beds and high temperature areas are formed around the combustor. At about 20 seconds after a bed working for gas-in flow, the heat transfer has demonstrated obvious attenuating. The research suggests that it is very challenging for simultaneously maintaining low gas-out VOC concentration and keeping low fuel consumption and low combustion temperature in RTOs.

Numerical Investigation of Nitrate Leakage and Migration in the Soil after Rainfall

2014 ◽  
Vol 1010-1012 ◽  
pp. 429-436
Author(s):  
Jin Hua Shan ◽  
Jing Ding ◽  
Jian Feng Lu
Keyword(s):  
Heat Transfer ◽  
Thermal Power ◽  
Nitrate Salt ◽  
Storage Medium ◽  
Migration Process ◽  
Solar Thermal Power ◽  
Salt Layer ◽  
Thermal Power System ◽  
And Migration ◽  
And Storage

Nitrate salt is important heat transfer and storage medium in solar thermal power system, but nitrate salt leakage and pollution in groundwater is seldom investigated. In this paper, the nitrate salt leakage and migration in the soil after rainfall are simulated and analyzed. During the nitrate leakage process, the liquid nitrate will solidify, and then a thin solidification layer of nitrate forms. According to the simulation result, the radius of the leakage opening mainly affects the radius of nitrate solidification layer, while the leakage velocity will influence the radius and thickness of salt layer. During the nitrate migration process after rainfall, the nitrate will gradually migrate to the groundwater, and the final migration domain of nitrate in the soil will be mainly determined by the radius of nitrate solidification layer.

A Numerical Investigation Into the Heat Transfer Performance and Particle Dynamics of a Compressible, Highly Mass Loaded, High Reynolds Number, Particle Laden Flow

2021 ◽  
Author(s):  
Kyle Hassan ◽  
Robert F. Kunz ◽  
David Hanson ◽  
Michael Manahan
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Computational Model ◽  
High Reynolds Number ◽  
Heat Transfer Performance ◽  
Particle Dynamics ◽  
Transfer Performance ◽  
Temperature Distributions ◽  
High Reynolds ◽  
Particle Laden Flow

Abstract In this work, we study the heat transfer performance and particle dynamics of a highly mass loaded, compressible, particle-laden flow in a horizontally-oriented pipe using an Eulerian-Eulerian (two-fluid) computational model. An attendant experimental configuration [1] provides the basis for the study. Specifically, a 17 bar co-flow of nitrogen gas and copper powder are modeled with inlet Reynolds numbers of 3×104, 4.5×104, and 6×104 and mass loadings of 0, 0.5, and 1.0. Eight binned particle sizes were modeled to represent the known powder properties. Significant settling of all particle groups are observed leading to asymmetric temperature distributions. Wall and core flow temperature distributions are observed to agree well with measurements. In high Reynolds number cases, the predictions of the multiphase computational model were satisfactorily aligned with the experimental results. Low Reynolds number model predictions were not as consistent with the experimental measurements.

Numerical Modeling of Velocity and Temperature Distributions in a Bipolar Plate of PEM Electrolysis Cell With Greatly Improved Flow Uniformity

2009 ◽  
Author(s):  
Jephanya Kasukurthi ◽  
K. M. Veepuri ◽  
Jianhu Nie ◽  
Yitung Chen
Keyword(s):  
Heat Transfer ◽  
Proton Exchange Membrane ◽  
Three Dimensional ◽  
Flow Distribution ◽  
Bipolar Plate ◽  
Proton Exchange ◽  
Electrolysis Cell ◽  
Flow And Heat Transfer ◽  
Temperature Distributions ◽  
Pem Electrolysis

In this present work, finite volume method was used to simulate the three-dimensional water flow and heat transfer in a flow field plate of the proton exchange membrane (PEM) electrolysis cell. The standard k-ε model together with standard wall function method was used to model three-dimensional fluid flow and heat transfer. First, numerical simulations were performed for a basic bipolar plate and it was found that the flow distribution inside the channels in not uniform. The design of the basic bipolar plate has been changed to a new model, which is featured with multiple inlets and multiple outlets. Numerical results show that the flow and temperature distributions for the new design become much homogeneous.

Conjugated heat transfer and temperature distributions in a gas turbine combustion liner under base-load operation

2010 ◽  
Vol 24 (9) ◽  
pp. 1939-1946 ◽  
Author(s):  
Kyung Min Kim ◽  
Namgeon Yun ◽  
Yun Heung Jeon ◽  
Dong Hyun Lee ◽  
Hyung Hee Cho ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Temperature Distributions ◽  
Conjugated Heat Transfer ◽  
Gas Turbine Combustion ◽  
Base Load

scholarly journals Numerical study of flow patterns and heat transfer in mini twisted oval tubes

2015 ◽  
Vol 26 (12) ◽  
pp. 1550140 ◽  
Author(s):  
Amin Ebrahimi ◽  
Ehsan Roohi
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Performance ◽  
Numerical Study ◽  
Critical Role ◽  
Reynolds Numbers ◽  
Flow Patterns ◽  
Working Fluid ◽  
Transfer Performance ◽  
Temperature Dependent ◽  
Overall Performance

Flow patterns and heat transfer inside mini twisted oval tubes (TOTs) heated by constant-temperature walls are numerically investigated. Different configurations of tubes are simulated using water as the working fluid with temperature-dependent thermo-physical properties at Reynolds numbers ranging between 500 and 1100. After validating the numerical method with the published correlations and available experimental results, the performance of TOTs is compared to a smooth circular tube. The overall performance of TOTs is evaluated by investigating the thermal-hydraulic performance and the results are analyzed in terms of the field synergy principle and entropy generation. Enhanced heat transfer performance for TOTs is observed at the expense of a higher pressure drop. Additionally, the secondary flow generated by the tube-wall twist is concluded to play a critical role in the augmentation of convective heat transfer, and consequently, better heat transfer performance. It is also observed that the improvement of synergy between velocity and temperature gradient and lower irreversibility cause heat transfer enhancement for TOTs.

Sign in / Sign up

Export Citation Format

Share Document